5.2C Operating band combination for SUL
38.101-13GPPNRPart 1: Range 1 StandaloneRelease 17TSUser Equipment (UE) radio transmission and reception
NR operation is designed to operate in the operating band combination defined in Table 5.2C-1, Table 5.2C-2, Table 5.2C-3 and Table 5.2C-4, where all operating bands are within FR1.
If the mandatory simultaneous Rx/Tx capability applies for a band combination, when the applicable lower order band combination is a band pair in a higher order band combination, the mandatory simultaneous Rx/Tx capability also applies for the band pair in the higher order band combination.
Table 5.2C-1: Operating band combination for SUL in FR1
|
NR Band combination for SUL |
NR Band (Table 5.2-1) |
|
SUL_n24-n992 |
n24, n99 |
|
SUL_n41-n802 |
n41, n80 |
|
SUL_n41-n812 |
n41, n81 |
|
SUL_n41-n832 |
n41, n83 |
|
SUL_n41-n952 |
n41, n95 |
|
SUL_n41-n972 |
n41, n97 |
|
SUL_n41-n982 |
n41, n98 |
|
SUL_n41-n992 |
n41, n99 |
|
SUL_n48-n992 |
n48, n99 |
|
SUL_n77-n802 |
n77, n80 |
|
SUL_n77-n842 |
n77, n84 |
|
SUL_n77-n992 |
n77, n99 |
|
SUL_n78-n802 |
n78, n80 |
|
SUL_n78-n812 |
n78, n81 |
|
SUL_n78-n822 |
n78, n82 |
|
SUL_n78-n832 |
n78, n83 |
|
SUL_n78-n842 |
n78, n84 |
|
SUL_n78-n862 |
n78, n86 |
|
SUL_n79-n802 |
n79, n80 |
|
SUL_n79-n812 |
n79, n81 |
|
SUL_n79-n832 |
n79, n83 |
|
SUL_n79-n842 |
n79, n84 |
|
SUL_n79-n952 |
n79, n95 |
|
SUL_n79-n972 |
n79, n97 |
|
SUL_n79-n982 |
n79, n98 |
|
NOTE 1: If a UE is configured with both NR UL and NR SUL carriers in a cell, the switching time between NR UL carrier and NR SUL carrier is 0 us. NOTE 2: For UE supporting SUL band combination simultaneous Rx/Tx capability is mandatory. |
|
Table 5.2C-2: Operating SUL band combination with intra-band non-contiguous CA in FR1
|
NR Band combination for SUL |
NR Band (Table 5.2-1) |
|
SUL_n41(*)-n992 |
n41, n99 |
|
SUL_n48(*)-n992 |
n48, n99 |
|
SUL_n77(*)-n992 |
n77, n99 |
|
SUL_n78(*)-n862 |
n78, n86 |
|
NOTE 1: If a UE is configured with both NR UL and NR SUL carriers in a cell, the switching time between NR UL carrier and NR SUL carrier is 0 us. NOTE 2: For UE supporting SUL band combination simultaneous Rx/Tx capability is mandatory. NOTE 3: The notation CA_nX(*) in this table indicates intra-band non-contiguous CA for band nX. The configurations for each band are in table 5.5C-2. |
|
Table 5.2C-3: Operating SUL band combination with intra-band contiguous CA in FR1
|
NR Band combination for SUL |
NR Band (Table 5.2-1) |
|
SUL_n41-n80 |
n41, n80 |
|
SUL_n41-n83 |
n41, n83 |
|
SUL_n41-n95 |
n41, n95 |
|
SUL_n78-n80 |
n78, n80 |
|
SUL_n78-n84 |
n78, n84 |
|
SUL_n79-n80 |
n79, n80 |
|
SUL_n79-n83 |
n79, n83 |
|
SUL_n79-n95 |
n79, n95 |
|
NOTE 1: If a UE is configured with both NR UL and NR SUL carriers in a cell, the switching time between NR UL carrier and NR SUL carrier is 0 us. NOTE 2: For UE supporting SUL band combination simultaneous Rx/Tx capability is mandatory. |
|
Table 5.2C-4: Operating SUL band combination with inter-band CA in FR1
|
NR Band combination for SUL |
NR Band (Table 5.2-1) |
|
CA_n1_SUL_n78-n80 |
n1, n78, n80 |
|
CA_n1_SUL_n78-n84 |
n1, n78, n84 |
|
CA_n3_SUL_n41-n80 |
n3, n41, n80 |
|
CA_n3_SUL_n78-n80 |
n3, n78, n80 |
|
CA_n3_SUL_n79-n80 |
n3, n79, n80 |
|
CA_n28_SUL_n41-n83 |
n28, n41, n83 |
|
CA_n28_SUL_n79-n83 |
n28, n79, n83 |
|
CA_n41_SUL_n79-n80 |
n41, n79, n80 |
|
CA_n41_SUL_n79-n83 |
n41, n79, n83 |
|
CA_n41_SUL_n79-n97 |
n41, n79, n97 |
|
CA_n79_SUL_n41-n80 |
n41, n79, n80 |
|
CA_n79_SUL_n41-n83 |
n41, n79, n83 |
|
CA_n79_SUL_n41-n97 |
n41, n79, n97 |
|
CA_n28-n79_SUL_n41-n83 |
n28, n41, n79, n83 |
|
CA_n28-n41_SUL_n79-n83 |
n28, n41, n79, n83 |
|
NOTE 1: If a UE is configured with both NR UL and NR SUL carriers in a cell, the switching time between NR UL carrier and NR SUL carrier is 0 us. NOTE 2: For UE supporting SUL band combination simultaneous Rx/Tx capability is mandatory. |
|