6.6B Reference radio bearer configurations
36.5083GPPCommon test environments for User Equipment (UE) conformance testingEvolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC)Release 17TS
6.6B.1 SRB and DRB parameters and combinations
6.6B.1.1 SRB and DRB parameters
6.6B.1.1.1 Physical Layer configurations
Table 6.6B.1.1.1-1: PhysicalConfigDedicated-DEFAULT
|
Derivation Path: TS 36.508 clause 4.8.2.1.6, Table 4.8.2.1.6-1 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
PhysicalConfigDedicated-DEFAULT ::= SEQUENCE { |
||||
|
cqi-ReportConfig |
CQI-ReportConfig-DEFAULT using condition CQI_PERIODIC |
See subclause 4.6.3 |
SRB1 or RBC or RBC-HO or HO-TO-EUTRA |
|
|
soundingRS-UL-ConfigDedicated |
SoundingRS-UL-ConfigDedicated-DEFAULT |
See subclause 4.6.3 |
(SRB1 or RBC or RBC-HO or HO-TO-EUTRA) |
|
|
Not present |
Not applicable for CAT M1 |
CEmodeA or CEmodeB |
||
|
} |
||||
|
Condition |
Explanation |
|
SRB1 |
Used at configuration of SRB1 during RRC connection (re-)establishment |
|
RBC |
Used at configuration of a radio bearer combination during SRB2+DRB establishment |
|
2TX |
Used for cells with two antenna ports |
|
RBC-HO |
Used during Handover |
|
HO-TO-EUTRA |
Inter-RAT handover to E-UTRA |
|
CEmodeA |
CE mode A test environment |
|
CEmodeB |
CE mode B test environment |