4.4.8 Common parameters for simulated WLAN AP’s
36.5083GPPCommon test environments for User Equipment (UE) conformance testingEvolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC)Release 17TS
The parameters specified in this subclause apply to all simulated WLAN APs unless otherwise specified.
Default WLAN parameters for simulated APs are specified in table 4.4.8-1.
Table 4.4.8-1: Default parameters for simulated WLAN APs
|
Parameter |
Value |
Condition |
|
SSID |
3GPP WLAN InterWorking |
|
|
Security |
[WPA2] |
|
|
Hot Spot 2.0 Support |
Yes |
|
|
Trusted/Un-Trusted non 3GPP Access |
Un-Trusted |
|
|
EAP-AKA Procedure |
CHAP |
|
|
Beacon RSSI |
42 (-86 dBm), NOTE 1 |
OFFLOAD |
|
Beacon RSSI |
Configured at the SS according to PIXIT parameter |
IMSoWLAN |
|
NOTE 1: The power level is specified at each UE Rx antenna. |
||
|
Condition |
Explanation |
|
OFFLOAD |
WLAN offload scenarios |
|
IMSoWLAN |
IMS over WLAN scenarios |
Table 4.4.8-2: Default parameters for simulated WLAN APs (2nd WLAN)
|
Parameter |
Value |
Condition |
|
SSID |
3GPP WLAN InterWorking 2 |
|
|
Security |
[WPA2] |
|
|
Hot Spot 2.0 Support |
Yes |
|
|
Trusted/Un-Trusted non 3GPP Access |
Un-Trusted |
|
|
EAP-AKA Procedure |
CHAP |
|
|
Beacon RSSI |
42 (-86 dBm), NOTE 1 |
OFFLOAD |
|
Beacon RSSI |
Configured at the SS according to PIXIT parameter |
IMSoWLAN |
|
NOTE 1: The power level is specified at each UE Rx antenna. |
||
|
Condition |
Explanation |
|
OFFLOAD |
WLAN offload scenarios |
|
IMSoWLAN |
IMS over WLAN scenarios |