4.6.6 Measurement information elements
36.5083GPPCommon test environments for User Equipment (UE) conformance testingEvolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC)Release 17TS
– FreqBandIndicatorNR-r15
Table 4.6.6-0: FreqBandIndicatorNR-r15
Derivation Path: TS 36.331 [17], clause 6.3.4 |
|||
Information Element |
Value/remark |
Comment |
Condition |
FreqBandIndicatorNR-r15 |
NR Operating band under test |
– MeasConfig-DEFAULT
Table 4.6.6-1: MeasConfig-DEFAULT
Derivation Path: 36.331, clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
MeasConfig-DEFAULT ::= SEQUENCE { |
|||
measObjectToRemoveList |
Not present |
||
measObjectToAddModList |
Not present |
||
MeasObjectEUTRA-GENERIC |
RF |
||
reportConfigToRemoveList |
Not present |
||
reportConfigToAddModList |
Not present |
||
ReportConfigToAddModList_DEFAULT |
RF |
||
measIdToRemoveList |
Not present |
||
measIdToAddModList |
Not present |
||
MeasIdToAddModList_DEFAULT |
RF |
||
quantityConfig |
QuantityConfig-DEFAULT |
||
measGapConfig |
Not present |
||
MeasGapConfig-GP1 |
INTER-FREQ, UTRAN |
||
MeasGapConfig-GP2 |
GERAN, INTER-RAT |
||
MeasGapConfig-CE |
intraFreq-CE-NeedForGaps |
||
s-Measure |
Not present |
||
preRegistrationInfoHRPD |
Not present |
||
speedStatePars |
Not present |
||
measObjectToAddModList-v9e0 SEQUENCE { |
Band > 64 and RF |
||
measObjectEUTRA-v9e0 SEQUENCE { |
N entries |
N needs to be the same number of entries as in measObjectToAddModList |
|
carrierFreq-v9e0[n] |
Downlink EARFCN for Freq |
||
} |
|||
} |
|||
measScaleFactor-r12 |
sf-EUTRA-cf1 |
specifies the factor for scaling the measurement performance requirements in TS 36.133 |
IncMon |
heightThreshRef-r15 |
Not present |
||
} |
|||
Note: For signalling test, table 6.5.1-1 is applied. |
Condition |
Explanation |
INTER-FREQ |
For E-UTRA inter-freq measurements |
INTER-RAT |
For inter-RAT measurements with UTRAN and GERAN |
Band > 64 |
If band > 64 is selected |
intraFreq-CE-NeedForGaps |
For UE having set pc_intraFreq-CE-NeedForGaps to TRUE. |
RF |
For RF, performance and RRM testing |
IncMon |
For IncMon RRM testing |
– MeasGapConfig-GP1
Table 4.6.6-1A: MeasGapConfig-GP1
Derivation Path: 36.331, clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
MeasGapConfig-GP1 ::= CHOICE { |
|||
setup SEQUENCE { |
|||
gapOffset CHOICE { |
|||
gp0 |
0 |
TGRP = 40 ms |
|
} |
|||
} |
|||
} |
– MeasGapConfig-CE
Table 4.6.6-1BA: MeasGapConfig-CE
Derivation Path: 36.331, clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
MeasGapConfig-CE ::= CHOICE { |
|||
setup SEQUENCE { |
|||
gapOffset CHOICE { |
|||
gp0 |
20 |
TGRP = 40 ms |
|
} |
|||
} |
|||
} |
– MeasGapConfig-GP2
Table 4.6.6-1B: MeasGapConfig-GP2
Derivation Path: 36.331, clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
MeasGapConfig-GP2 ::= CHOICE { |
|||
setup SEQUENCE { |
|||
gapOffset CHOICE { |
|||
gp1 |
0 |
TGRP = 80 ms |
|
} |
|||
} |
|||
} |
– MeasDS-Config-DEFAULT
Table 4.6.6-1CA: MeasDS-Config-DEFAULT
Derivation Path: 36.331, clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
MeasDS-Config-DEFAULT ::= CHOICE { |
|||
release |
NULL |
||
setup SEQUENCE { |
|||
dmtc-PeriodOffset-r12 CHOICE { |
|||
ms160-r12 |
10 |
||
} |
|||
ds-OccasionDuration-r12 CHOICE { |
|||
durationFDD-r12 |
1 |
FDD |
|
durationTDD-r12 |
2 |
TDD |
|
1 |
LAA SCell |
||
} |
|||
measCSI-RS-ToRemoveList-r12 |
Not present |
||
measCSI-RS-ToAddModList-r12 SEQUENCE (SIZE (1..maxCSI-RS-Meas-r12)) OF MeasCSI-RS-Config-r12 { |
|||
Not present |
|||
MeasCSI-RS-Config-Default |
CSI-RS |
||
} |
|||
} |
|||
} |
Condition |
Explanation |
FDD |
FDD cell environment |
TDD |
TDD cell environment |
CSI-RS |
For CSI-RS measurements |
LAA SCell |
For LAA SCell environment |
– MeasCSI-RS-Config-DEFAULT
Table 4.6.6-1CB: MeasCSI-RS-Config-DEFAULT
Derivation Path: 36.331, clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
MeasCSI-RS-Config-DEFAULT ::= SEQUENCE { |
|||
measCSI-RS-Id-r12 |
Set according to specific message content |
||
physCellId-r12 |
Set according to specific message content |
||
scramblingIdentity-r12 |
1 |
||
resourceConfig-r12 |
2 |
||
subframeOffset-r12 |
0 |
||
csi-RS-IndividualOffset-r12 |
0 |
||
} |
– MeasObjectCDMA2000-GENERIC
Table 4.6.6-1C: MeasObjectCDMA2000-GENERIC
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
MeasObjectCDMA2000-GENERIC ::= SEQUENCE { |
|||
cdma2000-Type |
As per specific message content |
[type1XRTT, typeHRPD] |
|
carrierFreq SEQUENCE { |
|||
bandClass |
As per specific message content |
Should be one of the following: bc0, bc1, bc2, bc3, bc4, bc5, bc6, bc7, bc8, bc9, bc10, bc11, bc12, bc13, bc14, bc15, bc16, bc17, spare14, spare13, spare12, spare11, spare10,spare9, spare8, spare7, spare6, spare5, spare4, spare3, spare2, spare1, … |
|
arfcn |
Downlink channel number |
INTEGER (0 to 2047) |
|
} |
|||
searchWindowSize |
As per specific message content |
INTEGER (0..15) |
|
offsetFreq |
0 (0 dB) |
||
cellsToRemoveList |
Not present |
||
cellsToAddModList |
[Not present] |
||
cellForWhichToReportCGI |
Not present |
||
} |
– ReportConfigToAddModList_DEFAULT
Table 4.6.6-1D: ReportConfigToAddModList_DEFAULT
Derivation Path: 36.331, clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigToAddModList_DEFAULT ::= SEQUENCE { |
1 entry |
||
reportConfigId[1] |
IdReportConfig-A3 |
||
reportConfig[1] |
ReportConfigEUTRA-A3 |
||
} |
– MeasIdToAddModList_DEFAULT
Table 4.6.6-1E: MeasIdToAddModList_DEFAULT
Derivation Path: 36.331, clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
MeasIdToAddModList_DEFAULT ::= SEQUENCE { |
1 entry |
||
measId[1] |
1 |
||
measObjectId[1] |
IdMeasObject-f1 |
||
reportConfigId[1] |
IdReportConfig-A3 |
||
} |
– MeasObjectEUTRA-GENERIC
Table 4.6.6-2: MeasObjectEUTRA-GENERIC(Freq)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
MeasObjectEUTRA-GENERIC(Freq) ::= SEQUENCE { |
|||
carrierFreq |
Downlink EARFCN for Freq |
||
carrierFreq |
65535 |
maxEARFCN |
Band > 64 |
allowedmeasBandwidth |
The number of the resource blocks for Freq |
||
presenceAntennaPort1 |
FALSE |
||
TRUE |
At least two cell-specific antenna ports are used in all neighbouring cells. |
All neighCells with port1 |
|
neighbourCellConfig |
’01’B (No MBSFN subframes are present in all neighbour cells) |
MBSFN doesn’t apply by default. |
|
offsetFreq |
0 (dB 0) |
||
cellsToRemoveList |
Not present |
||
cellsToAddModList |
Not present |
||
blackCellsToRemoveList |
Not present |
||
blackCellsToAddModList |
Not present |
||
cellForWhichToReportCGI |
Not present |
||
measCycleSCell-r10 |
sf512 |
SCell_EXIST |
|
measSubframePatternConfigNeigh-r10 |
Not present |
||
measDS-Config-r12 |
MeasDS-Config-DEFAULT |
DS_Meas |
|
reducedMeasPerformance-r12 |
TRUE |
For reduced measurement performance, otherwise it is normal measurement performance |
IncMon |
rmtc-Config-r13 |
Not present |
||
tx-ResourcePoolToRemoveList-r14 |
Not present |
||
tx-ResourcePoolToAddList-r14 |
Not present |
||
} |
Condition |
Explanation |
SCell_EXIST |
When SCell exists on the carrier frequency indicated by carrierFreq |
All neighCells with port1 |
Used for all neighbouring cells with at least two cell-specific antenna ports |
DS_Meas |
Used for discovery signals measurement on the carrier frequency indicated by carrierFreq |
Band > 64 |
If band > 64 is selected |
IncMon |
For IncMon RRM testing |
– MeasObjectGERAN-GENERIC
Table 4.6.6-2A: MeasObjectGERAN-GENERIC(Freq)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
MeasObjectGERAN-GENERIC(Freq) ::= SEQUENCE { |
|||
carrierFreqs SEQUENCE { |
|||
startingARFCN |
Downlink GERAN ARFCN of Freq |
||
bandIndicator |
Set according to the band used for GERAN cells under test |
||
followingARFCNs CHOICE { |
|||
explicitListOfARFCNs |
Set the corresponding ARFCN of GERAN cells under test |
||
} |
|||
} |
|||
offsetFreq |
0 (dB 0) |
||
ncc-Permitted |
‘01000000’B |
NCC=1 permitted |
|
cellForWhichToReportCGI |
Not present |
||
} |
– MeasObjectNR-GENERIC
Table 4.6.6-2B: MeasObjectNR-GENERIC (Freq)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
MeasObjectNR-GENERIC(Freq) ::= SEQUENCE { |
|||
carrierFreq-r15 |
Downlink ARFCN of ssbFrequency |
||
rs-ConfigSSB-r15 ::= SEQUENCE { |
|||
measTimingConfig-r15 ::= SEQUENCE { |
|||
periodicityAndOffset-r15 CHOICE { |
|||
sf20-r15 |
0 |
||
} |
|||
ssb-Duration-r15 |
sf5 |
||
} |
|||
subcarrierSpacingSSB-r15 |
kHz15 |
FR1_FDD |
|
kHz30 |
FR1_TDD |
||
kHz120 |
FR2_TDD |
||
} |
|||
threshRS-Index-r15 |
Not present |
||
maxRS-IndexCellQual-r15 |
Not present |
||
offsetFreq-r15 |
0 |
||
blackCellsToRemoveList-r15 |
Not present |
||
blackCellsToAddModList-r15 |
Not present |
||
quantityConfigSet-r15 |
1 |
||
cellsForWhichToReportSFTD-r15 |
Not present |
||
cellForWhichToReportCGI-r15 |
Not present |
||
deriveSSB-IndexFromCell-r15 |
Not present |
||
ss-RSSI-Measurement-r15 |
Not present |
||
bandNR-r15 CHOICE { |
|||
Setup |
FreqBandIndicatorNR-r15 |
||
} |
|||
} |
Condition |
Explanation |
FR1_FDD |
FDD frequency range < 6GHz |
FR1_TDD |
TDD frequency range < 6GHz |
FR2_TDD |
TDD frequency range > 6GHz |
– MeasObjectUTRA-GENERIC
Table 4.6.6-3: MeasObjectUTRA-GENERIC(Freq)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
MeasObjectUTRA-GENERIC(Freq) ::= SEQUENCE { |
|||
carrierFreq |
Downlink UARFCN of Freq |
||
offsetFreq |
0 (dB 0) |
||
cellsToRemoveList |
Not present |
||
cellsToAddModList |
Not present |
For UTRA, the neighbouring cell list needs to be provided in specific test cases. |
|
cellForWhichToReportCGI |
Not present |
||
reducedMeasPerformance-r12 |
TRUE |
For reduced measurement performance, otherwise it is normal measurement performance |
IncMon |
} |
Condition |
Explanation |
IncMon |
For IncMon RRM testing |
– MeasObjectWLAN-W2-GENERIC
Table 4.6.6-3AB: MeasObjectWLAN-W2-GENERIC (Freq, SSID1, SSID2)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
measObjectWLAN-r13 SEQUENCE { |
|||
carrierFreq-r13 |
Freq |
WLAN band and carrier as used in test setup for 2 entries |
|
wlan-ToAddModList-r13 OF SEQUENCE { |
2 entries |
||
ssid-r12[1] |
SSID1 |
||
ssid-r12[2] |
SSID2 |
||
} |
|||
wlan-ToRemoveList-r13 |
Not Present |
||
} |
– QuantityConfig-DEFAULT
Table 4.6.6-3A: QuantityConfig-DEFAULT
Derivation Path: 36.331, clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
QuantityConfig-DEFAULT ::= SEQUENCE { |
|||
quantityConfigEUTRA SEQUENCE { |
|||
filterCoefficientRSRP |
Not present |
DEFAULT fc4 |
|
filterCoefficientRSRQ |
Not present |
DEFAULT fc4 |
|
} |
|||
quantityConfigUTRA SEQUENCE {} |
Not present |
||
quantityConfigUTRA SEQUENCE { |
UTRAN |
||
measQuantityUTRA-FDD |
cpich-EcN0 |
||
measQuantityUTRA-FDD |
cpich-RSCP |
For signalling test cases |
|
measQuantityUTRA-TDD |
pccpch-RSCP |
||
filterCoefficient |
Not present |
DEFAULT fc4 |
|
} |
|||
quantityConfigGERAN SEQUENCE {} |
Not present |
||
quantityConfigGERAN SEQUENCE { |
GERAN |
||
measQuantityGERAN |
rssi |
||
filterCoefficient |
Not present |
DEFAULT fc2 |
|
} |
|||
quantityConfigCDMA2000 SEQUENCE {} |
Not present |
||
quantityConfigCDMA2000 SEQUENCE { |
CDMA2000 |
||
measQuantityCDMA2000 |
[FFS] |
||
} |
|||
quantityConfigEUTRA-v1250 SEQUENCE { |
|||
filterCoefficientCSI-RSRP-r12 |
Not present |
DEFAULT fc4 |
CSI-RSRP |
} |
|||
quantityConfigEUTRA-v1310 |
Not present |
||
quantityConfigEUTRA-v1310 SEQUENCE { |
RS-SINR |
||
filterCoefficientRS-SINR-r13 |
Not present |
DEFAULT fc4 |
|
} |
|||
quantityConfigWLAN-r13 |
Not present |
||
quantityConfigWLAN-r13 SEQUENCE { |
WLAN |
||
measQuantityWLAN-r13 |
rssiWLAN |
||
filterCoefficientRS-SINR-r13 |
Not present |
DEFAULT fc4 |
|
} |
|||
quantityConfigNRList-r15 |
Not present |
||
quantityConfigNRList-r15 (SIZE (1..maxQuantSetsNR-r15)) OF SEQUENCE { |
2 entries |
NR |
|
measQuantityCellNR-r15[1] SEQUENCE { |
|||
filterCoeff-RSRP-r15 |
Not present |
DEFAULT fc4 |
|
filterCoeff-RSRQ-r15 |
Not present |
DEFAULT fc4 |
|
filterCoefficient-SINR-r13 |
Not present |
DEFAULT fc4 |
|
} |
|||
measQuantityRS-IndexNR-r15[1] |
Not present |
||
measQuantityRS-IndexNR-r15[1] SEQUENCE { |
SSB_INDEX |
||
filterCoeff-RSRP-r15 |
Not present |
DEFAULT fc4 |
|
filterCoeff-RSRQ-r15 |
Not present |
DEFAULT fc4 |
|
filterCoefficient-SINR-r13 |
Not present |
DEFAULT fc4 |
|
} |
|||
measQuantityCellNR-r15[2] SEQUENCE { |
|||
filterCoeff-RSRP-r15 |
Not present |
DEFAULT fc4 |
|
filterCoeff-RSRQ-r15 |
Not present |
DEFAULT fc4 |
|
filterCoefficient-SINR-r13 |
Not present |
DEFAULT fc4 |
|
} |
|||
measQuantityRS-IndexNR-r15[2] |
Not present |
||
measQuantityRS-IndexNR-r15[2] SEQUENCE { |
SSB_INDEX |
||
filterCoeff-RSRP-r15 |
Not present |
DEFAULT fc4 |
|
filterCoeff-RSRQ-r15 |
Not present |
DEFAULT fc4 |
|
filterCoefficient-SINR-r13 |
Not present |
DEFAULT fc4 |
|
} |
|||
} |
|||
} |
Condition |
Explanation |
UTRAN |
For inter-RAT measurements with UTRAN |
GERAN |
For inter-RAT measurements with GERAN |
CDMA2000 |
For inter-RAT measurements with CDMA2000 |
CSI-RSRP |
For CSI-RSRP measurements |
RS-SINR |
For RS-SINR measurements |
WLAN |
For inter-RAT measurements with WLAN |
NR |
For inter-RAT measurements with NR |
SSB_INDEX |
SSB index is required to be included in measurement report. |
– ReportConfigEUTRA-A1
Table 4.6.6-4: ReportConfigEUTRA-A1(Thres)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-A1(Thres) ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventA1 SEQUENCE { |
|||
a1-Threshold CHOICE { |
|||
threshold-RSRP |
Thres+140 |
Thres is actual threshold value in dBm |
|
} |
|||
} |
|||
} |
|||
hysteresis |
0 (0 dB) |
||
timeToTrigger |
ms256 |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
||
reportQuantity |
both |
||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
} |
– ReportConfigEUTRA-A2
Table 4.6.6-5: ReportConfigEUTRA-A2(Thres)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-A2(Thres) ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventA2 SEQUENCE { |
|||
a2-Threshold CHOICE { |
|||
threshold-RSRP |
Thres+140 |
Thres is actual threshold value in dBm |
|
} |
|||
} |
|||
} |
|||
hysteresis |
0 (0 dB) |
||
timeToTrigger |
ms320 |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
||
reportQuantity |
both |
||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
} |
– ReportConfigEUTRA-A3
Table 4.6.6-6: ReportConfigEUTRA-A3
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-A3 ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventA3 SEQUENCE { |
|||
a3-Offset |
0 (0 dB) |
To reduce interference between intra-frequency multiple cells |
|
reportOnLeave |
FALSE |
||
} |
|||
} |
|||
hysteresis |
0 (0 dB) |
||
timeToTrigger |
ms640 |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
||
reportQuantity |
both |
||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
si-RequestForHO-r9 |
Not Present |
||
ue-RxTxTimeDiffPeriodical-r9 |
Not Present |
||
includeLocationInfo-r10 |
Not Present |
||
reportAddNeighMeas-r10 |
Not Present |
||
alternativeTimeToTrigger-r12 |
Not Present |
||
useT312-r12 |
Not Present |
||
usePSCell-r12 |
Not Present |
||
aN-Threshold1-v1250 |
Not Present |
||
a5-Threshold2-v1250 |
Not Present |
||
reportStrongestCSI-RSs-r12 |
Not Present |
||
reportCRS-Meas-r12 |
Not Present |
||
triggerQuantityCSI-RS-r12 |
Not Present |
||
reportSSTD-Meas-r13 |
Not Present |
||
rs-sinr-Config-r13 |
Not Present |
||
useWhiteCellList-r13 |
Not Present |
||
measRSSI-ReportConfig-r13 |
Not Present |
||
includeMultiBandInfo-r13 |
Not Present |
||
ul-DelayConfig-r13 |
Not Present |
||
ue-RxTxTimeDiffPeriodicalTDD-r13 |
Not Present |
||
purpose-v1430 |
Not Present |
||
maxReportRS-Index-r15 |
Not Present |
||
includeBT-Meas-r15 |
Not Present |
||
includeWLAN-Meas-r15 |
Not Present |
||
purpose-r15 |
Not Present |
||
numberOfTriggeringCells-r15 |
2 |
Aerial UE |
|
a4-a5-ReportOnLeave-r15 |
Not Present |
||
} |
Condition |
Explanation |
Aerial UE |
For Aerial vehicles |
– ReportConfigEUTRA-A4
Table 4.6.6-6AA: ReportConfigEUTRA-A4(Thres)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-A4 ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventA4 SEQUENCE { |
|||
a4-Threshold CHOICE{ |
|||
threshold-RSRP |
Thres + 140 |
Thres is actual threshold value in dBm |
Not RSRQ |
threshold-RSRQ |
Thres * 2 + 40 |
Thres is actual threshold value in dB |
RSRQ |
} |
|||
} |
|||
} |
|||
hysteresis |
0 (0 dB) |
||
timeToTrigger |
ms0 |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
Not RSRQ |
|
rsrq |
RSRQ |
||
reportQuantity |
both |
||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
si-RequestForHO-r9 |
Not Present |
||
ue-RxTxTimeDiffPeriodical-r9 |
Not Present |
||
includeLocationInfo-r10 |
Not Present |
||
reportAddNeighMeas-r10 |
Not Present |
||
alternativeTimeToTrigger-r12 |
Not Present |
||
useT312-r12 |
Not Present |
||
usePSCell-r12 |
Not Present |
||
aN-Threshold1-v1250 |
Not Present |
||
a5-Threshold2-v1250 |
Not Present |
||
reportStrongestCSI-RSs-r12 |
Not Present |
||
reportCRS-Meas-r12 |
Not Present |
||
triggerQuantityCSI-RS-r12 |
Not Present |
||
reportSSTD-Meas-r13 |
Not Present |
||
rs-sinr-Config-r13 |
Not Present |
||
useWhiteCellList-r13 |
Not Present |
||
measRSSI-ReportConfig-r13 |
Not Present |
||
includeMultiBandInfo-r13 |
Not Present |
||
ul-DelayConfig-r13 |
Not Present |
||
ue-RxTxTimeDiffPeriodicalTDD-r13 |
Not Present |
||
purpose-v1430 |
Not Present |
||
maxReportRS-Index-r15 |
Not Present |
||
includeBT-Meas-r15 |
Not Present |
||
includeWLAN-Meas-r15 |
Not Present |
||
purpose-r15 |
Not Present |
||
numberOfTriggeringCells-r15 |
2 |
Aerial UE |
|
a4-a5-ReportOnLeave-r15 |
Not Present |
||
} |
Condition |
Explanation |
RSRQ |
When RSRQ based measurement is applied |
Aerial UE |
See the definition below table 4.6.6-6. |
– ReportConfigEUTRA-A5
Table 4.6.6-6AB: ReportConfigEUTRA-A5(Thres1, Thres2)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-A5 ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventA5 SEQUENCE { |
|||
a5-Threshold1 CHOICE{ |
|||
threshold-RSRP |
Thres1 + 140 |
Thres1 is actual threshold value in dBm |
Not RSRQ |
threshold-RSRQ |
Thres1 * 2 + 40 |
Thres1 is actual threshold value in dB |
RSRQ |
} |
|||
a5-Threshold2 CHOICE{ |
|||
threshold-RSRP |
Thres2 + 140 |
Thres2 is actual threshold value in dBm |
Not RSRQ |
threshold-RSRQ |
Thres2 * 2 + 40 |
Thres2 is actual threshold value in dB |
RSRQ |
} |
|||
} |
|||
} |
|||
hysteresis |
0 (0 dB) |
||
timeToTrigger |
ms0 |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
Not RSRQ |
|
rsrq |
RSRQ |
||
reportQuantity |
both |
||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
si-RequestForHO-r9 |
Not Present |
||
ue-RxTxTimeDiffPeriodical-r9 |
Not Present |
||
includeLocationInfo-r10 |
Not Present |
||
reportAddNeighMeas-r10 |
Not Present |
||
alternativeTimeToTrigger-r12 |
Not Present |
||
useT312-r12 |
Not Present |
||
usePSCell-r12 |
Not Present |
||
aN-Threshold1-v1250 |
Not Present |
||
a5-Threshold2-v1250 |
Not Present |
||
reportStrongestCSI-RSs-r12 |
Not Present |
||
reportCRS-Meas-r12 |
Not Present |
||
triggerQuantityCSI-RS-r12 |
Not Present |
||
reportSSTD-Meas-r13 |
Not Present |
||
rs-sinr-Config-r13 |
Not Present |
||
useWhiteCellList-r13 |
Not Present |
||
measRSSI-ReportConfig-r13 |
Not Present |
||
includeMultiBandInfo-r13 |
Not Present |
||
ul-DelayConfig-r13 |
Not Present |
||
ue-RxTxTimeDiffPeriodicalTDD-r13 |
Not Present |
||
purpose-v1430 |
Not Present |
||
maxReportRS-Index-r15 |
Not Present |
||
includeBT-Meas-r15 |
Not Present |
||
includeWLAN-Meas-r15 |
Not Present |
||
purpose-r15 |
Not Present |
||
numberOfTriggeringCells-r15 |
2 |
Aerial UE |
|
a4-a5-ReportOnLeave-r15 |
Not Present |
||
} |
Condition |
Explanation |
RSRQ |
See the definition below table 4.6.6-6AA. |
Aerial UE |
See the definition below table 4.6.6-6. |
– ReportConfigEUTRA-A6
Table 4.6.6-6A: ReportConfigEUTRA-A6
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-A6 ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventA6-r10 SEQUENCE { |
|||
a6-Offset-r10 |
0 (0 dB) |
||
a6-ReportOnLeave-r10 |
FALSE |
||
} |
|||
} |
|||
hysteresis |
0 (0 dB) |
||
timeToTrigger |
ms640 |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
||
reportQuantity |
both |
||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
si-RequestForHO-r9 |
Not Present |
||
ue-RxTxTimeDiffPeriodical-r9 |
Not Present |
||
includeLocationInfo-r10 |
Not Present |
||
reportAddNeighMeas-r10 |
Not Present |
||
} |
– ReportConfigEUTRA-PERIODICAL
Table 4.6.6-7: ReportConfigEUTRA-PERIODICAL
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-PERIODICAL ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
periodical SEQUENCE { |
|||
purpose |
reportStrongestCells |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
||
reportQuantity |
both |
||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
infinity |
||
} |
– ReportConfigInterRAT-B1-GERAN
Table 4.6.6-7A: ReportConfigInterRAT-B1-GERAN(GERAN-Thres)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigInterRAT-B1-GERAN(GERAN-Thres) ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventB1 SEQUENCE { |
|||
b1-Threshold CHOICE { |
|||
b1-ThresholdGERAN |
(GERAN-Thres + 110) |
GERAN-Thres is actual value in dBm |
|
} |
|||
} |
|||
} |
|||
hysteresis |
0 |
INTEGER(0..30) |
|
timeToTrigger |
ms0 |
||
} |
|||
} |
|||
maxReportCells |
6 |
In line with RAN4 requirement |
|
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
} |
– ReportConfig-B1-NR-r15
Table 4.6.6-7AA: ReportConfig-B1-NR-r15(NR_Thres)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfig-B1-NR ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventB1-NR-r15 SEQUENCE{ |
|||
b1-ThresholdNR-r15 CHOICE{ |
|||
nr-RSRP-r15 |
NR_Thres |
NR_Thres is actual RSCP value in dBm |
|
} |
|||
reportOnLeave-r15 |
FALSE |
||
} |
|||
} |
|||
hysteresis |
0 |
||
timeToTrigger |
ms0 |
||
} |
|||
maxReportCells |
6 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
} |
– ReportConfigInterRAT-B1-UTRA
Table 4.6.6-7B: ReportConfigInterRAT-B1-UTRA(UTRA-Thres)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigInterRAT-B1-UTRA(UTRA-Thres) ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventB1 SEQUENCE { |
|||
b1-Threshold CHOICE { |
|||
b1-ThresholdUTRA CHOICE { |
|||
utra-EcN0 |
(UTRA-Thres * 2 + 49) |
UTRA-Thres is actual Ec/NO value in dB |
UTRA-FDD |
utra-RSCP |
UTRA-Thres + 115 |
For signalling test cases UTRA-Thres is actual RSCP value in dBm |
UTRA-FDD |
utra-RSCP |
UTRA-Thres + 115 |
UTRA-Thres is actual RSCP value in dBm |
UTRA-TDD |
} |
|||
} |
|||
} |
|||
} |
|||
hysteresis |
3 (1.5 dB) |
||
timeToTrigger |
ms0 |
||
} |
|||
} |
|||
maxReportCells |
6 |
In line with RAN4 requirement |
|
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
} |
Condition |
Explanation |
UTRA-FDD |
UTRA FDD cell environment |
UTRA-TDD |
UTRA TDD cell environment |
– ReportConfigInterRAT-B1-NR
Table 4.6.6-7BA: ReportConfigInterRAT-B2-NR(NR-Thres)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigInterRAT-B2-NR ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventB1-NR-r15 SEQUENCE{ |
|||
b1-Threshold2NR-r15 CHOICE{ |
|||
nr-RSRP-r15 |
NR Thres |
NR Thres is an entry value into a mapping table in TS 38.133 [72] |
|
} |
|||
reportOnLeave-r15 |
FALSE |
||
} |
|||
} |
|||
hysteresis |
0 |
||
timeToTrigger |
ms0 |
||
} |
|||
} |
|||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
reportQuantityCellNR-r15 SEQUENCE { |
|||
ss-rsrp |
TRUE |
||
ss-rsrq |
FALSE |
||
ss-sinr |
FALSE |
||
} |
|||
maxReportRS-Index-r15 |
Not present |
||
reportQuantityRS-IndexNR-r15 |
Not present |
||
reportRS-IndexResultsNR |
Not present |
||
reportSFTD-Meas-r15 |
Not present |
||
} |
– ReportConfigInterRAT-B2-CDMA2000
Table 4.6.6-7C: ReportConfigInterRAT-B2-CDMA2000(EUTRA-Thres, CDMA2000-Thres)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigInterRAT-B2-CDMA2000(EUTRA-Thres, CDMA2000-Thres) ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventB2 SEQUENCE { |
|||
b2-Threshold1 CHOICE { |
|||
threshold-RSRP |
EUTRA-Thres+140 |
EUTRA-Thres is actual threshold value in dBm |
|
} |
|||
b2-Threshold2 CHOICE { |
|||
b2-Threshold2CDMA2000 |
[30 (-15 dB)] |
Integer (0..63) |
|
} |
|||
} |
|||
} |
|||
Hysteresis |
[2 (1 dB)] |
INTEGER(0..30) |
|
timeToTrigger |
ms0 |
||
} |
|||
} |
|||
maxReportCells |
[8] |
||
reportInterval |
[ms2048] |
Range: ms120, ms240, ms480, ms640, ms1024, ms2048, ms5120, ms10240, min1, min6, min12, min30, min60, spare3, spare2, spare1 |
|
reportAmount |
[r1] |
Range: r1, r2, r4, r8, r16, r32, r64, infinity |
|
} |
Table 4.6.6-7D: Void
– ReportConfigInterRAT-B2-GERAN
Table 4.6.6-7E: ReportConfigInterRAT-B2-GERAN(EUTRA-Thres, GERAN-Thres)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigInterRAT-B2-GERAN(EUTRA-Thres, GERAN-Thres) ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventB2 SEQUENCE { |
|||
b2-Threshold1 CHOICE { |
|||
threshold-RSRP |
EUTRA-Thres+140 |
EUTRA-Thres is actual threshold value in dBm |
|
} |
|||
b2-Threshold2 CHOICE { |
|||
b2-Threshold2GERAN |
GERAN-Thres + 110 |
GERAN-Thres is actual value in dBm |
|
} |
|||
} |
|||
} |
|||
hysteresis |
0 |
INTEGER(0..30) |
|
timeToTrigger |
ms0 |
||
} |
|||
} |
|||
maxReportCells |
6 |
In line with RAN4 requirement |
|
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
} |
– ReportConfigInterRAT-B2-UTRA
Table 4.6.6-8: ReportConfigInterRAT-B2-UTRA(EUTRA-Thres, UTRA-Thres)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigInterRAT-B2-UTRA(EUTRA-Thres, UTRA-Thres) ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventB2 SEQUENCE { |
|||
b2-Threshold1 CHOICE { |
|||
threshold-RSRP |
EUTRA-Thres+140 |
EUTRA-Thres is actual threshold value in dBm |
|
} |
|||
b2-Threshold2 CHOICE { |
|||
b2-Threshold2UTRA CHOICE { |
|||
utra-EcN0 |
UTRA-Thres * 2 + 49 |
UTRA-Thres is actual Ec/NO value in dB |
UTRA-FDD |
utra-RSCP |
UTRA-Thres + 115 |
For signalling test cases UTRA-Thres is actual RSCP value in dBm |
UTRA-FDD |
utra-RSCP |
UTRA-Thres + 115 |
UTRA-Thres is actual RSCP value in dBm |
UTRA-TDD |
} |
|||
} |
|||
} |
|||
} |
|||
hysteresis |
3 (1.5 dB) |
||
timeToTrigger |
ms0 |
||
} |
|||
} |
|||
maxReportCells |
6 |
In line with RAN4 requirement |
|
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
} |
Condition |
Explanation |
UTRA-FDD |
UTRA FDD cell environment |
UTRA-TDD |
UTRA TDD cell environment |
– ReportConfigInterRAT-B2-NR
Table 4.6.6-8A: ReportConfigInterRAT-B2-NR(EUTRA-Thres, NR-Thres)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigInterRAT-B2-NR ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventB2-NR-r15 SEQUENCE{ |
|||
b2-Threshold1-r15 CHOICE{ |
|||
threshold-RSRP |
EUTRA Thres |
EUTRA Thres is an entry value into a mapping table in TS 36.133 [39] |
|
} |
|||
b2-Threshold2NR-r15 CHOICE{ |
|||
nr-RSRP-r15 |
NR Thres |
NR Thres is an entry value into a mapping table in TS 38.133 [72] |
|
} |
|||
reportOnLeave-r15 |
FALSE |
||
} |
|||
} |
|||
Hysteresis |
3 (1.5 dB) |
||
timeToTrigger |
ms1024 |
||
} |
|||
} |
|||
reportInterval |
ms1024 |
||
reportAmount |
infinity |
||
reportQuantityCellNR-r15 SEQUENCE { |
|||
ss-rsrp |
TRUE |
||
ss-rsrq |
FALSE |
||
ss-sinr |
FALSE |
||
} |
|||
maxReportRS-Index-r15 |
Not present |
||
reportQuantityRS-IndexNR-r15 |
Not present |
||
reportRS-IndexResultsNR |
Not present |
||
reportSFTD-Meas-r15 |
Not present |
||
} |
– – ReportConfigInterRAT-SFTD
Table 4.6.6-8B: ReportConfigInterRAT-SFTD
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigInterRAT-PERIODICAL ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
periodical SEQUENCE { |
|||
purpose |
reportStrongestCells |
||
} |
|||
} |
|||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
si-RequestForHO-r9 |
Not present |
||
reportQuantityUTRA-FDD-r10 |
Not present |
||
includeLocationInfo-r11 |
Not present |
||
b2-Threshold1-v1250 |
Not present |
||
reportQuantityWLAN-r13 |
Not present |
||
reportQuantityCellNR-r15 |
Not present |
||
maxReportRS-Index-r15 |
Not present |
||
reportQuantityRS-IndexNR-r15 |
Not present |
||
reportRS-IndexResultsNR |
Not present |
||
reportSFTD-Meas-r15 |
neighborCells |
INTER-RAT |
|
pSCell |
INTRA-FREQ |
||
} |
Condition |
Explanation |
INTER-RAT |
For Inter-RAT SFTD measurement |
INTRA-FREQ |
For Intra-frequency SFTD measurement |
ReportConfigInterRAT-PERIODICAL
Table 4.6.6-9: ReportConfigInterRAT-PERIODICAL
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigInterRAT-PERIODICAL ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
periodical SEQUENCE { |
|||
purpose |
reportStrongestCells |
||
} |
|||
} |
|||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
infinity |
||
} |
Table 4.6.6-9A: ReportConfigInterRAT-W1-WLAN (ThreshDB)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
ReportConfigInterRAT ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
1 entry |
||
eventID CHOICE { |
|||
eventW1-r13 SEQUENCE { |
1 entry |
||
w1-Threshold-r13 |
ThreshDB+101 |
||
} |
|||
hysteresis |
2 |
2 * .5 is 1dB |
|
timeToTrigger |
ms5120 |
5120ms |
|
} |
|||
} |
|||
} |
|||
} |
– ReportConfigInterRAT-W2-WLAN
Table 4.6.6-9B: ReportConfigInterRAT-W2-WLAN (Thresh1DB, Thresh2DB)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
ReportConfigInterRAT::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
1 entry |
||
eventID CHOICE { |
|||
eventW2-r13 SEQUENCE { |
2 entries |
||
w2-Threshold1-r13 |
Thresh1DB+101 |
||
w2-Threshold2-r13 |
Thresh2DB+101 |
||
} |
|||
hysteresis |
2 |
2 * .5 is 1dB |
|
timeToTrigger |
ms5120 |
5120ms |
|
} |
|||
} |
|||
} |
|||
} |
– ReportConfigInterRAT-W3-WLAN
Table 4.6.6-9C: ReportConfigInterRAT-W3-WLAN (ThreshDB)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
ReportConfigInterRAT::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
1 entry |
||
eventID CHOICE { |
|||
eventW3-r13 SEQUENCE { |
1 entry |
||
W3-Threshold-r13 |
ThreshDB+101 |
||
} |
|||
hysteresis |
2 |
2 * .5 is 1dB |
|
timeToTrigger |
ms5120 |
5120ms |
|
} |
|||
} |
|||
} |
|||
} |
– ReportConfigEUTRA-C1
Table 4.6.6-10: ReportConfigEUTRA-C1(Thres)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-C1 ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventC1-r12 SEQUENCE { |
|||
c1-Threshold-r12 |
Thres+140 |
Thres is actual threshold value in dBm |
|
c1-ReportOnLeave-r12 |
FALSE |
||
} |
|||
} |
|||
hysteresis |
0 (0 dB) |
||
timeToTrigger |
ms640 |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
||
reportQuantity |
sameAsTriggerQuantity |
||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
si-RequestForHO-r9 |
Not Present |
||
ue-RxTxTimeDiffPeriodical-r9 |
Not Present |
||
includeLocationInfo-r10 |
Not Present |
||
reportAddNeighMeas-r10 |
Not Present |
||
alternativeTimeToTrigger-r12 |
Not Present |
||
useT312-r12 |
Not Present |
||
usePSCell-r12 |
Not Present |
||
aN-Threshold1-v1250 |
Not Present |
||
a5-Threshold2-v1250 |
Not Present |
||
reportStrongestCSI-RSs-r12 |
false |
||
reportCRS-Meas-r12 |
false |
||
triggerQuantityCSI-RS-r12 |
true |
||
} |
– ReportConfigEUTRA-C2
Table 4.6.6-11: ReportConfigEUTRA-C2
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-C2 ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventC2-r12 SEQUENCE { |
|||
c2-RefCSI-RS-r12 |
1 |
||
c2-Offset-r12 |
2 |
The actual value is IE value * 0.5 dB. |
|
c2-ReportOnLeave-r12 |
FALSE |
||
} |
|||
} |
|||
hysteresis |
0 (0 dB) |
||
timeToTrigger |
ms640 |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
||
reportQuantity |
sameAsTriggerQuantity |
||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
si-RequestForHO-r9 |
Not Present |
||
ue-RxTxTimeDiffPeriodical-r9 |
Not Present |
||
includeLocationInfo-r10 |
Not Present |
||
reportAddNeighMeas-r10 |
Not Present |
||
alternativeTimeToTrigger-r12 |
Not Present |
||
useT312-r12 |
Not Present |
||
usePSCell-r12 |
Not Present |
||
aN-Threshold1-v1250 |
Not Present |
||
a5-Threshold2-v1250 |
Not Present |
||
reportStrongestCSI-RSs-r12 |
false |
||
reportCRS-Meas-r12 |
false |
||
triggerQuantityCSI-RS-r12 |
true |
||
} |
– ReportConfigEUTRA-PERIODICAL-CSI-RS
Table 4.6.6-12: ReportConfigEUTRA-PERIODICAL-CSI-RS
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-PERIODICAL ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
periodical SEQUENCE { |
|||
purpose |
reportStrongestCells |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
||
reportQuantity |
both |
||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
infinity |
||
si-RequestForHO-r9 |
Not Present |
||
ue-RxTxTimeDiffPeriodical-r9 |
Not Present |
||
includeLocationInfo-r10 |
Not Present |
||
reportAddNeighMeas-r10 |
Not Present |
||
alternativeTimeToTrigger-r12 |
Not Present |
||
useT312-r12 |
Not Present |
||
usePSCell-r12 |
Not Present |
||
aN-Threshold1-v1250 |
Not Present |
||
a5-Threshold2-v1250 |
Not Present |
||
reportStrongestCSI-RSs-r12 |
true |
||
reportCRS-Meas-r12 |
false |
||
triggerQuantityCSI-RS-r12 |
false |
||
} |
– ReportConfigEUTRA-V1
Table 4.6.6-13: ReportConfigEUTRA-V1
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-V1 ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventV1-r14 SEQUENCE { |
|||
v1-Threshold-r14 |
50 |
||
} |
|||
} |
|||
hysteresis |
0 (0 dB) |
||
timeToTrigger |
ms0 |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
Not RSRQ |
|
reportQuantity |
both |
||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
purpose-v14xy |
sidelink |
||
} |
– ReportConfigEUTRA-V2
Table 4.6.6-14: ReportConfigEUTRA-V2
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-V2 ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventV2-r14 SEQUENCE { |
|||
v2-Threshold-r14 |
10 |
||
} |
|||
} |
|||
hysteresis |
0 (0 dB) |
||
timeToTrigger |
ms0 |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
Not RSRQ |
|
reportQuantity |
both |
||
maxReportCells |
1 |
||
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
purpose-v14xy |
sidelink |
||
} |
– ReportConfigEUTRA-H1
Table 4.6.6-15: ReportConfigEUTRA-H1
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-H1 ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventH1-r15 SEQUENCE { |
|||
h1-ThresholdOffset-r15 |
0 (0m) |
||
h1-Hysteresis-15 |
5 (5m) |
||
} |
|||
} |
|||
hysteresis |
0 (0 dB) |
IE ignored by UE when h1-Hysteresis-15 is configured. |
|
timeToTrigger |
ms0 |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
IE ignored by UE for event H1 |
|
reportQuantity |
both |
IE ignored by UE for event H1 |
|
maxReportCells |
1 |
IE ignored by UE for event H1 |
|
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
} |
– ReportConfigEUTRA-H2
Table 4.6.6-16: ReportConfigEUTRA-H2
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-H2 ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
event SEQUENCE { |
|||
eventId CHOICE { |
|||
eventH2-r15 SEQUENCE { |
|||
h2-ThresholdOffset-r15 |
15 (30m) |
||
h2-Hysteresis-15 |
10 (10m) |
||
} |
|||
} |
|||
hysteresis |
0 (0 dB) |
IE ignored by UE when h2-Hysteresis-15 is configured. |
|
timeToTrigger |
ms0 |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
IE ignored by UE for event H2 |
|
reportQuantity |
both |
IE ignored by UE for event H2 |
|
maxReportCells |
1 |
IE ignored by UE for event H2 |
|
reportInterval |
ms1024 |
||
reportAmount |
r1 |
||
} |
– ReportConfigEUTRA-A3-CHO
Table 4.6.6-17: ReportConfigEUTRA-A3-CHO
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-A3 ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
periodical SEQUENCE { |
|||
purpose |
reportStrongestCells |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
||
reportQuantity |
both |
||
maxReportCells |
1 |
||
reportInterval |
min60 |
||
reportAmount |
r1 |
||
si-RequestForHO-r9 |
Not Present |
||
ue-RxTxTimeDiffPeriodical-r9 |
Not Present |
||
includeLocationInfo-r10 |
Not Present |
||
reportAddNeighMeas-r10 |
Not Present |
||
alternativeTimeToTrigger-r12 |
Not Present |
||
useT312-r12 |
Not Present |
||
usePSCell-r12 |
Not Present |
||
aN-Threshold1-v1250 |
Not Present |
||
a5-Threshold2-v1250 |
Not Present |
||
reportStrongestCSI-RSs-r12 |
Not Present |
||
reportCRS-Meas-r12 |
Not Present |
||
triggerQuantityCSI-RS-r12 |
Not Present |
||
reportSSTD-Meas-r13 |
Not Present |
||
rs-sinr-Config-r13 |
Not Present |
||
useWhiteCellList-r13 |
Not Present |
||
measRSSI-ReportConfig-r13 |
Not Present |
||
includeMultiBandInfo-r13 |
Not Present |
||
ul-DelayConfig-r13 |
Not Present |
||
ue-RxTxTimeDiffPeriodicalTDD-r13 |
Not Present |
||
purpose-v1430 |
Not Present |
||
maxReportRS-Index-r15 |
Not Present |
||
includeBT-Meas-r15 |
Not Present |
||
includeWLAN-Meas-r15 |
Not Present |
||
purpose-r15 |
Not Present |
||
numberOfTriggeringCells-r15 |
Not Present |
||
a4-a5-ReportOnLeave-r15 |
Not Present |
||
condReconfigurationTriggerEUTRA-r16 ::= SEQUENCE { |
|||
condEventId-r16 CHOICE { |
|||
condEventA3-r16 SEQUENCE { |
|||
a3-Offset-r16 |
0 (0 dB) |
||
hysteresis-r16 |
0 (0 dB) |
||
timeToTrigger-r16 |
ms640 |
||
} |
|||
} |
|||
} |
|||
ul-DelayValueConfig-r16 |
Not Present |
||
} |
– ReportConfigEUTRA-A5-CHO
Table 4.6.6-18: ReportConfigEUTRA-A5-CHO(Thres1, Thres2)
Derivation Path: 36.331 clause 6.3.5 |
|||
Information Element |
Value/remark |
Comment |
Condition |
ReportConfigEUTRA-A3 ::= SEQUENCE { |
|||
triggerType CHOICE { |
|||
periodical SEQUENCE { |
|||
purpose |
reportStrongestCells |
||
} |
|||
} |
|||
triggerQuantity |
rsrp |
||
reportQuantity |
both |
||
maxReportCells |
1 |
||
reportInterval |
min60 |
||
reportAmount |
r1 |
||
si-RequestForHO-r9 |
Not Present |
||
ue-RxTxTimeDiffPeriodical-r9 |
Not Present |
||
includeLocationInfo-r10 |
Not Present |
||
reportAddNeighMeas-r10 |
Not Present |
||
alternativeTimeToTrigger-r12 |
Not Present |
||
useT312-r12 |
Not Present |
||
usePSCell-r12 |
Not Present |
||
aN-Threshold1-v1250 |
Not Present |
||
a5-Threshold2-v1250 |
Not Present |
||
reportStrongestCSI-RSs-r12 |
Not Present |
||
reportCRS-Meas-r12 |
Not Present |
||
triggerQuantityCSI-RS-r12 |
Not Present |
||
reportSSTD-Meas-r13 |
Not Present |
||
rs-sinr-Config-r13 |
Not Present |
||
useWhiteCellList-r13 |
Not Present |
||
measRSSI-ReportConfig-r13 |
Not Present |
||
includeMultiBandInfo-r13 |
Not Present |
||
ul-DelayConfig-r13 |
Not Present |
||
ue-RxTxTimeDiffPeriodicalTDD-r13 |
Not Present |
||
purpose-v1430 |
Not Present |
||
maxReportRS-Index-r15 |
Not Present |
||
includeBT-Meas-r15 |
Not Present |
||
includeWLAN-Meas-r15 |
Not Present |
||
purpose-r15 |
Not Present |
||
numberOfTriggeringCells-r15 |
Not Present |
||
a4-a5-ReportOnLeave-r15 |
Not Present |
||
condReconfigurationTriggerEUTRA-r16 ::= SEQUENCE { |
|||
condEventId-r16 CHOICE { |
|||
condEventA5-r16 SEQUENCE { |
|||
a5-Threshold1-r16 CHOICE{ |
|||
threshold-RSRP |
Thres1 + 140 |
Thres1 is actual threshold value in dBm |
Not RSRQ |
threshold-RSRQ |
Thres1 * 2 + 40 |
Thres1 is actual threshold value in dB |
RSRQ |
} |
|||
a5-Threshold2-r16 CHOICE{ |
|||
threshold-RSRP |
Thres2 + 140 |
Thres2 is actual threshold value in dBm |
Not RSRQ |
threshold-RSRQ |
Thres2 * 2 + 40 |
Thres2 is actual threshold value in dB |
RSRQ |
} |
|||
hysteresis-r16 |
0 (0 dB) |
||
timeToTrigger-r16 |
ms640 |
||
} |
|||
} |
|||
} |
|||
ul-DelayValueConfig-r16 |
Not Present |
||
} |