4.4.7 Default parameters specific for simulated cells
36.5083GPPCommon test environments for User Equipment (UE) conformance testingEvolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC)Release 17TS
Default parameters specific for simulated cells are specified in this subclause.
4.4.7.1 Common contents of HRPD Overhead messages
– QuickConfig
The QuickConfig message is used to indicate a change in the overhead messages’ contents and to provide frequently changing information.
Table 4.4.7.1-1: QuickConfig
|
Derivation Path: C.S0024-B clause 7.11.6.2.1 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
MessageID |
0x0 |
0-255; |
|
|
ColorCode |
See table 4.4.2-3 |
0 – 255 |
|
|
SectorID24 |
Least significant 24 bits of Sector ID given in table 4.4.2-3 |
24 bits |
|
|
SectorSignature |
A valid value and same as used for SectorParameters |
16 bits |
|
|
AccessSignature |
A valid value and same as used for AccessParameters |
16 bits |
|
|
Redirect |
0X0 |
0-1 |
|
|
RPCCount63To0 |
A valid value corresponding to the value of px_MACIndex |
0-63 |
|
|
ForwardTrafficValid63To0 |
A valid value corresponding to the value of px_MACIndex |
0-1; RPCCount63To0 occurrences |
|
|
RPCCount127To64Included |
A valid value corresponding to the value of px_MACIndex |
0 or 1 bits |
|
|
RPCCount127To64 |
A valid value corresponding to the value of px_MACIndex |
0 or 6 bits |
|
|
ForwardTrafficValid127To64 |
A valid value corresponding to the value of px_MACIndex |
0 or 1 bits;RPCCount127To64 occurrences |
|
|
RPCCount130To383Included |
Not Present or a valid value corresponding to the value of px_MACIndex |
0 or 1 bits |
|
|
RPCCount130To383 |
Not Present or a valid value corresponding to the value of px_MACIndex |
0 or 8 bits |
|
|
ForwardTrafficValid130To383 |
Not Present or a valid value corresponding to the value of px_MACIndex |
0 or 1 bits |
|
|
Reserved |
0X0 |
0 – 7 bits as needed all set to zero |
|
– SectorParameters
The SectorParameters message is used to convey sector specific information to the access terminals.
Table 4.4.7.1-2: SectorParameters
|
Derivation Path: C.S0024-B clause 7.11.6.2.2 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
MessageID |
0x01 |
0-255 |
|
|
CountryCode |
See table 4.4.2-3 |
0 – 999;Depends on test case |
|
|
SectorID |
See table 4.4.2-3 |
128 bit value |
|
|
SubnetMask |
0x40 |
8 bits |
|
|
SectorSignature |
Any valid value |
16 bits |
|
|
Latitude |
Any valid value |
22 bits |
|
|
Longitude |
Any valid value |
23 bits |
|
|
RouteUpdateRadiusOverhead |
0x0 |
11 bits |
|
|
LeapSeconds |
‘A valid value, calculated and updated by the SS’ |
8 bits |
|
|
LocalTimeOffset |
Any valid value |
11 bits |
|
|
ReverseLinkSilenceDuration |
0x1 or 0x0 |
2 bits |
|
|
ReverseLinkSilencePeriod |
0x1 or 0x0 |
2 bits |
|
|
ChannelCount |
0x1 or 0x0 |
5 bits |
|
|
Channel |
24 bits; ChannelCount occurrences; |
||
|
SystemType |
0x00 |
8 bits |
|
|
BandClass |
Set according to PIXIT parameter |
5 bits; Depends on test case |
|
|
ChannelNumber |
Set according to PIXIT parameter |
11 bits; Depends on BandClass |
|
|
NeighborCount |
0x0 |
5 bits |
No_NeighPNInc |
|
16 |
NeighPNInc |
||
|
NeighborPilotPN |
Not Present |
No_NeighPNInc |
|
|
Pilots PN’s of configured cells [FFS] |
NeighPNInc |
||
|
NeighborChannelIncluded |
0x0 |
1 bit; NeighbourCount occurrences |
NeighPNInc |
|
Not Present |
No_NeighPNInc |
||
|
NeighborChannel |
Not Present |
0 or 24 bits; NeighbourCount occurrences |
|
|
NeighborSearchWindowSizeIncluded |
0x0 |
1 bit |
|
|
NeighborSearchWindowSize |
Not Present |
0 or 4 bits; NeighbourCount occurrences |
|
|
NeighborSearchWindowOffsetIncluded |
0x0 |
1 bit |
|
|
NeighborSearchWindowOffset |
Not Present |
0 or 3 bits; NeighbourCount occurrences |
|
|
ExtendedChannelIncluded |
0x0 or Not Present |
0 or 1 bits; The number of cdma2000 high rate packet data extended channels available to the access terminal on this sector; Note 1; |
|
|
ExtendedChannelCount |
Not Present |
0 or 5 bits |
|
|
ExtendedChannel |
Not Present |
24 bits; 0 or ExtendedChannelCount occurrences |
|
|
AccessHashingChannelMaskIncluded |
0x0 or Not Present |
0 or 1 bits; AccessHashingChannelMaskLength occurrences of this field and AccessHashingChannelMask if set as AccessHashingChannelMask; Note 1; |
|
|
AccessHashingMaskLength |
Not Present |
0 or 4 bits; 0<=AccessHashingChannelMaskLength<=(ChannelCount + ExtendedChannelCount), |
|
|
AccessHashingChannelMaskSameAsPrevious |
Not Present |
1 bit; AccessHashingChannelMaskLength occurrences of this field and AccessHashingChannelMask if set as AccessHashingChannelMask |
|
|
AccessHashingChannelMask |
Not Present |
0 or AccessHashingMaskLength+1 |
|
|
RouteUpdateTriggerCodeIncluded |
0x0 or Not Present |
0 or 1 bits; Note 1; |
|
|
RouteUpdateTriggerCode |
Not Present |
0 or 12 bits |
|
|
RouteUpdateTriggerMaxAge |
Not Present |
0 or 4 bits |
|
|
PriorSessionGAUP |
0x0 or Not Present |
0 or 1 bits; Note 1; |
|
|
FPDCHSupportedInclude |
0x0 or Not Present |
0 or 1 bits; Note 1; |
|
|
FPDCHSupported |
Not Present |
0 or 1 bits |
|
|
SecondaryColorCodeIncluded |
0x0 or Not Present |
0 or 1 bits; Note 1; |
|
|
SecondaryColorCodeCount |
Not Present |
0 or 3 bits |
|
|
SecondaryColorCode |
Not Present |
8 bits |
|
|
PilotGroupIDLoopIncluded |
0x0 or Not Present |
0 or 1 bits; Note 1; |
|
|
PilotGroupIDIncluded |
Not Present |
0 or 1 bits |
|
|
PilotGroupID |
Not Present |
0 or 3 bits |
|
|
IsSectorMultiCarrierCapable |
0x0 or Not Present |
0 or 1 bits; Note 1; |
|
|
ReverseBandClass |
Not Present |
0 or 5 bits |
|
|
ReverseChannelNumber |
Not Present |
0 or 11 bits |
|
|
Reserved |
0X0 |
0 – 7 bits as needed all set to zero |
|
|
Note 1: As no Non reserved fields following this are included, it can be Not Present; If not present, AT assumes as 0x0. |
|||
|
Condition |
Explanation |
|
No_NeighPNInc |
No neighbour Pilot PN included |
|
NeighPNInc |
Neighbor Pilot PN’s included |
– AccessParameters
The AccessParameters message is used to convey Access Channel information to the access terminals.
Table 4.4.7.1-3: AccessParameters
|
Derivation Path: C.S0024-B clause 9.4.6.2.6 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
MessageID |
0x1 |
0-255 |
|
|
Access Cycle Duration |
16 slots or 64 slots |
16,12,64,128 slots |
|
|
Access Signature |
Any valid value |
16 bits Note1. |
|
|
OpenLoopAdjust |
Set according to PIXIT parameter for default open loop adjust |
8bits(-84 – 115 dB); Actual value is -1 times |
|
|
ProbeInitialAdjust |
0x0(0 dB) |
5 bits(-16 – 15 db) |
|
|
ProbeNumStep |
0x5 |
4bits(1 – 15) |
|
|
PowerStep |
0x8(4 dB) |
4 bits(0 – 7.5 dB) |
|
|
PreambleLength |
0x2 |
3bits(1 – 7) |
|
|
CapsuleLengthMax |
0x2 or 0x4 |
4 bits |
|
|
APersistence |
0x0 or 0x1 |
6 bits; ‘NACMPAPersist = 4’ occurrences |
|
|
APersistence |
0x0 or 0x1 |
6 bits |
|
|
APersistence |
0x0 or 0x1 |
6 bits |
|
|
APersistence |
0x0 or 0x1 |
6 bits |
|
|
Reserved |
0X0 |
0 – 7 bits as needed all set to zero |
|
|
Note 1: The value specified is the value to be used when the AccessParameters is being sent first time. At every change of content of AccessParameters message it is incremented by 1. |
|||
– Sync
The access network broadcasts the Sync message to convey basic network and timing information
Table 4.4.7.1-4: Sync
|
Derivation Path: C.S0024-B clause 7.3.6.2.1 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
MessageID |
0x0 |
0-255 |
|
|
MaximumRevision |
0x1 |
8 bits ; Clause 1.15 of 3GPP2 C.S0024-B v3.0 |
|
|
MinimumRevision |
0x1 |
8 bits; Clause 1.15 of 3GPP2 C.S0024-B v3.0 |
|
|
Pilot PN Offset |
See table 4.4.2-3 |
0 – 511 |
|
|
CDMA System Time |
A valid value, calculated and updated by the SS |
37 bits |
|
4.4.7.2 Common contents of 1XRTT Overhead messages
4.4.7.2.1 Configuration sequence number
In general, a base station maintains a configuration sequence number CONFIG_SEQ for configuration messages transmitted on the Paging channel and increments by 1 modulo 64 whenever any of the following messages being transmitted are modified:
System Parameters Message
Neighbor List Message (Band Class 0 only)
CDMA Channel List Message
Extended System Parameters Message
Extended Neighbor List Message (band classes other than Band Class 0).
For simplicity resaons the System Simulator may use any value for this configuration sequence number CONFIG_SEQ.
4.4.7.2.2 Over Head messages
– CDMA Channel List Message
Table 4.4.7.2.2-1: CDMA Channel List Message
|
Derivation Path: C.S0005 clause 3.7.2.3.2.4 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
PILOT_PN |
See table 4.4.2-4 |
9 bits; |
|
|
CONFIG_MSG_SEQ |
Set to ‘ CONFIG_SEQ’ of base station as per clause 4.4.7.2.1 |
6 bits; |
|
|
CDMA_FREQ |
Set according to PIXIT parameter or as per clause 4.3.1.4 |
11 bits |
|
– System Parameters Message
Table 4.4.7.2.2-2: System Parameters Message
|
Derivation Path: C.S0005 clause 3.7.2.3.2.1 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
PILOT_PN |
See table 4.4.2-4 |
9 bits |
|
|
CONFIG_MSG_SEQ |
Set to ‘ CONFIG_SEQ’ of base station as per clause 4.4.7.2.1 |
6 bits |
|
|
SID |
See table 4.4.2-4 |
15 bits |
|
|
NID |
See table 4.4.2-4 |
16 bits |
|
|
REG_ZONE |
See table 4.4.2-4 |
12 bits |
|
|
TOTAL_ZONES |
1 |
3 bits |
|
|
ZONE_TIMER |
0 or 1 |
3 bits; 1 or 2 minutes |
|
|
MULT_SIDS |
0 or 1 |
1 bits; Mobile shall not or shall store SID_NID_List containing different SID’s |
|
|
MULT_NIDS |
0 or 1 |
1 bits; Mobile shall not or shall store SID_NID_List containing different NID’s |
|
|
BASE_ID |
See table 4.4.2-4 |
16 bits |
|
|
BASE_CLASS |
1 |
4 bits |
BandClass1_4 |
|
0 |
Not BandClass1_4 |
||
|
PAGE_CHAN |
1 |
3 bits; Number of Paging Channels |
|
|
MAX_SLOT_CYCLE_INDEX |
1 or 0 |
3 bits; Maximum Slot Cycle index |
|
|
HOME_REG |
1 |
1 bits; Home registration enabled |
|
|
FOR_SID_REG |
1 |
1 bits; SID roamer registration enabled |
|
|
FOR_NID_REG |
1 |
1 bits; NID roamer registration enabled |
|
|
POWER_UP_REG |
1 |
1 bits; power-up registration enabled |
|
|
POWER_DOWN_REG |
Set according to PIXIT parameter |
1 bits; power-down registration enabled as per PIXIT |
|
|
PARAMETER_REG |
0 or 1 |
1 bits; parameter change registration disabled or enabled |
|
|
REG_PRD |
0 |
7 bits; registration period; No timer Based Registration |
|
|
BASE_LAT |
Any valid value |
22 bits; Base Station Latitude |
|
|
BASE_LONG |
Any valid value |
23 bits; Base Station Longitude |
|
|
REG_DIST |
0 |
11 bits; Distance based registration disabled |
|
|
SRCH_WIN_A |
8 |
4 bits; Search Window size for Active Set; 60 PN Chips |
|
|
SRCH_WIN_N |
8 |
4 bits; Search Window Size for the neighbor set; 60 PN Chips |
|
|
SRCH_WIN_R |
8 |
4 bits; Search window size for the remaining set; 60 PN Chips |
|
|
NGHBR_MAX_AGE |
0 |
4 bits; Minimum Neighbour set age |
|
|
PWR_REP_THRESH |
0, 1 or 5 |
5 bits; Power control reporting threshold |
|
|
PWR_REP_FRAMES |
0, 4 or 7 |
4 bits; power control reporting frame count; 5 or 28 frames |
|
|
PWR_THRESH_ENABLE |
0 |
1 bits; threshold report mode disabled |
|
|
PWR_PERIOD_ENABLE |
0 |
1 bits; periodic report mode disabled |
|
|
PWR_REP_DELAY |
0 or 14 |
5 bits; 0 or 56 frames |
|
|
RESCAN |
0 |
1 bit; re-initialize and re-acquire the system |
|
|
T_ADD |
28 (-14 dB Ec/Io) |
6bits; Pilot detection threshold (-14 dB Ec/Io) |
|
|
T_DROP |
32 |
6 bits; Pilot drop threshold (-16 dB Ec/Io) |
|
|
T_COMP |
5 |
4; Active set versus candidate set comparison threshold (2.5 dB) |
|
|
T_TDROP |
3 |
4 bits; Drop timer value (4 sec) |
|
|
EXT_SYS_PARAMETER |
1 |
1 bit; Extended System Parameters message present |
|
|
EXT_NGHBR_LST |
1 |
1 bit; Extended neighbor list not present |
BandClass1_3_4 |
|
0 |
Not BandClass1_3_4 |
||
|
GEN_NGHBR_LST |
0 |
1 bit; General neighbor list not sent |
|
|
GLOBAL_REDIRECT |
0 |
1 bit; Global service redirection message not transmitted |
|
|
PRI_NGHBR_LST |
0 |
1 bit; Private neighbor list message not transmitted |
|
|
USER_ZONE_ID |
0 |
1 bit; User zone Identification not transmitted |
|
|
EXT_GLOBAL_REDIRECT |
0 |
1 bit; Extended global redirection not transmitted |
|
|
EXT_CHAN_LST |
0 |
1 bit; Extended channel list not sent |
|
|
Condition |
Explanation |
|
BandClass1_4 |
If Band Class is 1 or 4 |
|
BandClass1_3_4 |
If Band Class is 1 or 3 or 4 |
– Access Parameters Message
Table 4.4.7.2.2-3: Access Parameters message
|
Derivation Path: C.S0005 clause 3.7.2.3.2.2 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
PILOT_PN |
See table 4.4.2-4 |
9 bits; |
|
|
ACC_MSG_SEQ |
0,1,2..63 |
6 bits; Access Message Sequence; 0 is used in initial transmission and incremented by 1 modulo 64 every time Access Parameters message is modified; |
|
|
ACC_CHAN |
0 |
5 bits; Number of access channels -1 |
|
|
NOM_PWR |
0 |
4 bits; Nominal transmit power offset in dB |
|
|
INIT_PWR |
0 |
5 bits; Initial power offset in dB |
|
|
PWR_STEP |
1 or 3 |
3 bits; Power increment |
|
|
NUM_STEP |
Any valid value |
4 bits; 5 access probes/ sequence |
|
|
MAX_CAP_SZ |
2 or 7 |
3 bits; Maximum Access channel message capsule size =2 or 7 +3 frames |
|
|
PAM_SZ |
Any valid value |
4 bits; Access Channel preamble length = 2+1 frames |
|
|
PSIST(0-9) |
0 |
6 bits; Persistence value for access overload classes 0-9 |
|
|
PSIST(10) |
0 |
3 bits; Persistence value for access overload classes 10 |
|
|
PSIST(11) |
0 |
3 bits; Persistence value for access overload classes 11 (emergency) |
|
|
PSIST(12) |
0 |
3 bits; Persistence value for access overload classes 12 |
|
|
PSIST(13) |
0 |
3 bits; Persistence value for access overload classes 13 |
|
|
PSIST(14) |
0 |
3 bits; Persistence value for access overload classes 14 |
|
|
PSIST(15) |
0 |
3 bits; Persistence value for access overload classes 15 |
|
|
MSG_PSIST |
0 |
3 bits; Persistence modifier for access channel attempts for message transmissions |
|
|
REG_PSIST |
0 |
3 bits; Persistence modifier for Access Channel attempts for registrations |
|
|
PROBE_PN_RAN |
4 or 0 |
4 bits; Time Randomization for Access Channel probes= 0 to 15 PN chips |
|
|
ACC_TMO |
3, 4 or 5 |
4 bits; Acknowledgement timeout = (value +2) * 80 ms |
|
|
PROBE_BKOFF |
1 or 0 |
4 bits; Access Channel probe back off = no back off |
|
|
BKOFF |
1 or 0 |
4 bits; Access channel probe sequence backoff range =no back off |
|
|
MAX_REQ_SEQ |
Any valid value |
4 bits; Max number of access probe sequences for an access channel request |
|
|
MAX_RSP_SEQ |
Any valid value |
4 bits; Max number of access probe sequences for an access channel response |
|
|
AUTH |
0 |
2 bits; No authentication data in access channel messages |
|
|
RAND |
Not present |
0 or 32 bits |
|
|
NOM_PWR_EXT |
0 |
1 bits; Extended nominal transmit power |
|
– Extended System Parameters Message
Table 4.4.7.2.2-4: Extended System Parameters Message
|
Derivation Path: C.S0005 clause 3.7.2.3.2.13 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
PILOT_PN |
See table 4.4.2-4 |
9 bits |
|
|
CONFIG_MSG_SEQ |
Set to ‘ CONFIG_SEQ’ of base station as per clause 4.4.7.2.1 |
6 bits |
|
|
DELETE_FOR_TMSI |
0 |
1 bits; Delete foreign TMSI |
|
|
USE_TMSI |
0 or 1 |
1 bits; Use TMSI indicator |
|
|
PREF_MSID_TYPE |
3 |
2 bits; Preferred Access Channel MSID Type |
|
|
MCC |
See table 4.4.2-4 |
10 bits |
|
|
IMSI_11_12 |
See table 4.4.2-4 |
7 bits; 11th and 12th digits of the IMSI |
|
|
TMSI_ZONE_LEN |
1 or 0 |
4 bits |
|
|
TMSI_ZONE |
1 or Not present |
8 bits if present |
|
|
BCAST_INDEX |
0 |
3 bits |
|
|
IMSI_T_SUPPORTED |
0 |
1 bits |
|
|
P_REV |
6 |
8 bits |
|
|
MIN_P_REV |
6 |
8 bits |
|
|
SOFT_SLOPE |
0 |
6 bits |
|
|
ADD_INTERCEPT |
0 |
6 bits; 0 dB |
|
|
DROP_INTERCEPT |
0 |
6 bits; 0 dB |
|
|
PACKET_ZONE_ID |
0 |
8 bits; Packet data service zone not supported |
|
|
MAX_NUM_ALT_SO |
0 |
3 bits |
|
|
RESELECT_INCLUDED |
0 |
1 bits; System reselection parameters not included |
|
|
EC_THRESH |
Not present |
0 or 5 bits |
|
|
EC_I0_THRESH |
Not present |
0 or 5 bits |
|
|
PILOT_REPORT |
1 or 0 |
1 bits; Pilot Report indicator; the MS reports or does not report additional pilots which have strengths exceeding T_ADD |
|
|
NGHBR_SET_ENTRY_INFO |
0 |
1 bits |
|
|
ACC_ENT_HO_ORDER |
Not present |
0 or 1 bits |
|
|
NGHBR_SET_ACCESS_INFO |
0 |
1 bits |
|
|
ACCESS_HO |
Not present |
0 or 1 bits |
|
|
ACCESS_HO_MSG_RSP |
Not present |
0 or 1 bits |
|
|
ACCESS_PROBE_HO |
Not present |
0 or 1 bits |
|
|
ACC_HO_LIST_UPD |
Not present |
0 or 1 bits |
|
|
ACC_PROBE_HO_OTHER_MSG |
Not present |
0 or 1 bits |
|
|
MAX_NUM_PROBE_HO |
Not present |
0 or 3 bits |
|
|
NGHBR_SET_SIZE |
Not present |
0 or 6 bits |
|
|
ACCESS_ENTRY_HO |
Not present |
1 bits; Access Entry Handoff not permitted |
|
|
ACCESS_HO_ALLOWED |
Not present |
1 bits |
|
|
BROADCAST_GPS_ASST |
0 |
1 bits; Broad cast GPS not supported |
|
|
QPCH_SUPPORTED |
0 |
1 bits; Quick PCH not supported |
|
|
NUM_QPCH |
Not present |
0 or 2 bits |
|
|
QPCH_RATE |
Not present |
0 or 1 bits |
|
|
QPCH_POWER_LEVEL_PAGE |
Not present |
0 or 3 bits |
|
|
QPCH_CCI_SUPPORTED |
Not present |
0 or 1 bits |
|
|
QPCH_POWER_LEVEL_CONFIG |
Not present |
0 or 3 bits |
|
|
SDB_SUPPORTED |
0 |
1 bits; Short Data burst not supported |
|
|
RLGAIN_TRAFFIC_PILOT |
0 |
6 bits; 0 dB Gain adjustment of Reverse traffic channel |
|
|
REV_PWR_CNTL_DELAY_INCL |
0 |
1 bits |
|
|
REV_PWR_CNTL_DELAY |
Not present |
0 or 2 bits |
|
– Neighbor List Message
This message is sent when EXT_NGHBR_LST in Systems parameter message is set as ‘0’B i.e. the band class is 0;
Table 4.4.7.2.2-6: Neighbor List Message
|
Derivation Path: C.S0005 clause 3.7.2.3.2.3 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
PILOT_PN |
See table 4.4.2-4 |
9 bits |
|
|
CONFIG_MSG_SEQ |
Set to ‘ CONFIG_SEQ’ of base station as per clause 4.4.7.2.1 |
6 bits |
|
|
PILOT_INC |
10 or 1 |
4 bits; Pilot PN Sequence offset index increment = n * 50 |
|
|
NGHBR_CONFIG(n) |
0 or Not present |
||
|
NGHBR_PN(n) |
See table 4.4.2-4 or Not Present |
9 bits if present |
|
|
Note 1: the elements with index n are repeated as per table 4.4.2-5 |
|||
– Extended Neighbor List Message
This message is sent when EXT_NGHBR_LST in Systems parameter message is set as ‘1’B i.e. the band class is not 0;
Table 4.4.7.2.2-7: Extended Neighbor List Message
|
Derivation Path: C.S0005 clause 3.7.2.3.2.14 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
PILOT_PN |
See table 4.4.2-4 |
9 bits |
|
|
CONFIG_MSG_SEQ |
Set to ‘ CONFIG_SEQ’ of base station as per clause 4.4.7.2.1 |
6 bits |
|
|
PILOT_INC |
10 or 1 |
4 bits; Pilot PN Sequence offset index increment = n * 50 |
|
|
NGHBR_CONFIG(n) |
0 or Not present |
3 bits if present; |
|
|
NGHBR_PN(n) |
See table 4.4.2-4 or Not present |
9 bits if present |
|
|
SEARCH_PRIORITY(n) |
1, 2 or Not present |
2 bits if present; Medium search priority |
|
|
FREQ_INCL(n) |
1 |
1 bit |
InterFreqCell |
|
0 or Not present |
|||
|
NGHBR_BAND(n) |
Set according to PIXIT parameter |
0 or 5 bits |
InterFreqCell |
|
Not present |
|||
|
NGHBR_FREQ(n) |
Set according to PIXIT parameter |
0 or 11 bits |
InterFreqCell |
|
Not Present |
|||
|
Note 1: The elements with index n are repeated as per table 4.4.2-5. The SS can transmit up to 7 neighbour intra frequency cell information. The parameters for the first cell should be set as per table 4.4.2-4. |
|||
|
Condition |
Explanation |
|
InterFreqCell |
If the configured neighbour cell is on a different frequency compared to the cell in which Extended Neighbour list message is being transmitted |
– Sync channel Messages
Table 4.4.7.2.2-8: Sync Channel Message
|
Derivation Path: C.S0005 clause 3.7.2.3.2.26 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
P_REV |
6 |
8 bits; Protocol revision level |
|
|
MIN_P_REV |
6 |
8 bits; Minimum protocol revision level |
|
|
SID |
See table 4.4.2-4 |
15 bits |
|
|
NID |
See table 4.4.2-4 |
16 bits |
|
|
PILOT_PN |
See table 4.4.2-4 |
9 bits |
|
|
LC_STATE |
A valid value, calculated and updated by the SS |
42 bits; Long code State |
|
|
SYS_TIME |
A valid value, calculated and updated by the SS |
36 bits; System time |
|
|
LP_SEC |
A valid value, calculated and updated by the SS |
8 bits; The number of leap seconds |
|
|
LTM_OFF |
A valid value, calculated and updated by the SS |
6 bits; Offset of local time from System time |
|
|
DAYLT |
A valid value, calculated and updated by the SS |
1 bits; Daylight savings indicator |
|
|
PRAT |
0 |
2 bits; Paging Channel Data rate=9600 bps |
|
|
CDMA_FREQ |
Set according to PIXIT parameter or as per clause 4.3.1.4 |
11 bits; Frequency assignment |
|
|
EXT_CDMA_FREQ |
Set according to PIXIT parameter or as per clause 4.3.1.4 |
11 bits; Extended frequency assignment |
|