4.7B Default UTRA message and information element contents
36.5083GPPCommon test environments for User Equipment (UE) conformance testingEvolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC)Release 17TS
4.7B.1 UTRA RRC messages
– HANDOVER TO UTRAN COMMAND
Table 4.7B.1-1: HANDOVER TO UTRAN COMMAND
Derivation Path: 25.331, clause 10.2.16a |
|||
Information Element |
Value/remark |
Comment |
Condition |
New U-RNTI |
U-RNTI-Short |
||
– SRNC identity |
0000 0000 0001B |
||
– S-RNTI-2 |
00 0000 0001B |
||
Ciphering algorithm |
UEA0 or UEA1. The indicated algorithm must be one of the algorithms supported by the UE. |
||
RNC support for change of UE capability |
FALSE |
||
New H-RNTI |
Not present |
UTRA FDD PS RB, UTRA TDD PS RB, UTRA Speech, UTRA PS RB + Speech, UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
‘1010 1010 1010 1010’ |
UTRA HSDPA RB, UTRA HSUPA/HSDPA RB |
||
New Primary E-RNTI |
Not present |
UTRA FDD PS RB, UTRA TDD PS RB, UTRA HSDPA RB, UTRA Speech, UTRA PS RB + Speech. ,UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
‘1010 1010 1010 1010’ |
UTRA HSUPA/HSDPA RB |
||
New Secondary E-RNTI |
Not present |
||
Default configuration for CELL_FACH |
Not present |
||
CHOICE specification mode |
Complete specification |
||
– Signalling RB information to setup List |
Same as the corresponding IE in the RRC CONNECTION SETUP message (Transition to CELL_DCH or HS-PDSCH in CELL_FACH) using condition A1 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RRC CONNECTION SETUP message in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA FDD PS RB, UTRA HSDPA RB, UTRA Speech, UTRA PS RB + Speech, ,UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
Same as the corresponding IE in the RRC CONNECTION SETUP message in TS 34.108 clause 9.2.2 |
UTRA TDD PS RB |
||
Same as the corresponding IE in the RRC CONNECTION SETUP message (Transition to CELL_DCH or HS-PDSCH in CELL_FACH) using condition A3 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RRC CONNECTION SETUP (Transition to CELL_DCH) (1.28 Mcps TDD option) message in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSUPA/HSDPA RB |
||
– RAB information to setup list |
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A2 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A2 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA Speech, UTRA PS RB + Speech, UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A3 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A3 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA FDD PS RB, UTRA PS RB + Speech |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A11 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A11 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
||
Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A3 in TS 34.108 clause 9.2.2 for UTRA-TDD. |
UTRA TDD PS RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A10 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A10 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSDPA RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A14 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A13 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSUPA/HSDPA RB |
||
– UL Transport channel information common for all transport channels |
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A2 in TS 34.108 clause 9.1.1 for UTRA-FDD Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A2 in TS 34.108 clause 9.1.2 for UTRA-TDD |
UTRA Speech, UTRA PS RB + Speech, UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A3 in TS 34.108 clause 9.1.1 UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A3 in TS 34.108 clause 9.2.2 UTRA-TDD. |
UTRA FDD PS RB, UTRA TDD PS RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A10 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A10 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSDPA RB |
||
Same content as the corresponding IE in the RADIO BEARER SETUP message using condition A14 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same content as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A13 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSUPA/HSDPA RB |
||
– Added or Reconfigured UL TrCH information |
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A2 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A2 in TS 34.108 clause 9.1.2 for UTRA-TDD |
UTRA Speech, UTRA PS RB + Speech, UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A3 in TS 34.108 clause 9.1.1 |
UTRA FDD PS RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A10 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A10 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSDPA RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A11 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A11 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A14 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A13 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSUPA/HSDPA RB |
||
– Added or Reconfigured UL TrCH information |
2 Entries |
UTRA TDD PS RB |
|
– Added or Reconfigured UL TrCH information[1] |
Same as the corresponding IE in the RRC CONNECTION SETUP message (1.28 Mcps TDD) in TS 34.108 clause 9.2.2. |
UTRA TDD PS RB |
|
– Added or Reconfigured UL TrCH information[2] |
Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A3 in TS 34.108 clause 9.2.2. |
UTRA TDD PS RB |
|
– DL Transport channel information common for all transport channels |
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A2 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A2 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA Speech, UTRA PS RB + Speech, UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A3 in TS 34.108 clause 9.1.1 |
UTRA FDD PS RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A3 in TS 34.108 clause 9.2.2. |
UTRA TDD PS RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A10 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A10 in TS 34.108 clause 9.1.2 for UTRAT-TDD. |
UTRA HSDPA RB |
||
Same content as the corresponding IE in the RADIO BEARER SETUP message using condition A14 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A13 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSUPA/HSDPA RB |
||
– Added or Reconfigured DL TrCH information |
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A2 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A2 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA Speech, UTRA PS RB + Speech, UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A3 in TS 34.108 clause 9.1.1 |
UTRA FDD PS RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A11 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A11 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A10 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A10 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSDPA RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A14 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A13 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSUPA/HSDPA RB |
||
– Added or Reconfigured DL TrCH information |
2 Entries |
UTRA TDD PS RB |
|
– Added or Reconfigured DL TrCH information[1] |
Same as the corresponding IE in the RRC CONNECTION SETUP message (1.28 Mcps TDD) in TS 34.108 clause 9.2.2. |
UTRA TDD PS RB |
|
– Added or Reconfigured DL TrCH information[2] |
Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A3 in TS 34.108 clause 9.2.2. |
UTRA TDD PS RB |
|
– Uplink DPCH info |
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A2 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A13 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA Speech, UTRA PS RB + Speech, UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A3 in TS 34.108 clause 9.1.1 |
UTRA FDD PS RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A3 in TS 34.108 clause 9.2.2. |
UTRA TDD PS RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A10 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A10 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSDPA RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A14 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A13 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSUPA/HSDPA RB |
||
– E-DCH Info |
Not present |
UTRA FDD PS RB, UTRA TDD PS RB, UTRA HSDPA RB, UTRA Speech, UTRA PS RB + Speech, UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A14 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A13 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSUPA/HSDPA RB |
||
– Downlink HS-PDSCH Information |
Not present |
UTRA FDD PS RB, UTRA TDD PS RB, UTRA Speech, UTRA PS RB + Speech, UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A10 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A10 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSDPA RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A14 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A13 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSUPA/HSDPA RB |
||
– Downlink information common for all radio links |
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A2 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A2 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA Speech, UTRA PS RB + Speech, UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A4 in TS 34.108 clause 9.1.1 |
UTRA FDD PS RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A3 in TS 34.108 clause 9.2.2. |
UTRA TDD PS RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A10 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A10 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSDPA RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A14 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A13 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSUPA/HSDPA RB |
||
– Downlink information for each radio link list |
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A2 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A2 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA Speech, UTRA PS RB + Speech, UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
|
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A3 in TS 34.108 clause 9.1.1 |
UTRA FDD PS RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A3 in TS 34.108 clause 9.2.2. |
UTRA TDD PS RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A10 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A10 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSDPA RB |
||
Same as the corresponding IE in the RADIO BEARER SETUP message using condition A14 in TS 34.108 clause 9.1.1 for UTRA-FDD. Same as the corresponding IE in the RADIO BEARER SETUP message (1.28 Mcps TDD) using condition A13 in TS 34.108 clause 9.1.2 for UTRA-TDD. |
UTRA HSUPA/HSDPA RB |
||
Frequency info |
Set according to the frequency of the target UTRA cell. |
||
Multi-frequency Info |
Not present |
||
Maximum allowed UL TX power |
21dBm |
Condition |
Explanation |
UTRA Speech |
Establishment of the UTRA reference configuration as specified in Table 4.8.3-1 using the condition “UTRA Speech”. |
UTRA FDD PS RB |
Establishment of the UTRA FDD reference configuration as specified in Table 4.8.3-1 using the condition “UTRA FDD PS RB”. |
UTRA TDD PS RB |
Establishment of the UTRA TDD reference configuration as specified in Table 4.8.3-1 using the condition “UTRA TDD PS RB”. |
UTRA HSDPA RB |
Establishment of the UTRA reference configuration as specified in Table 4.8.3-1 using the condition “UTRA HSDPA RB”. |
UTRA HSUPA/HSDPA RB |
Establishment of the UTRA reference configuration as specified in Table 4.8.3-1 using the condition “UTRA HSUPA/HSDPA RB”. |
UTRA PS RB + Speech |
Establishment of the UTRA reference configuration as specified in Table 4.8.3-1 using the condition “UTRA PS RB + Speech”. |
UTRA Speech + Packet RAB Setup after Speech RAB Setup in CELL_DCH |
Establishment of the UTRA reference configuration as specified in Table 4.8.3-1 using the condition “UTRA Speech + Packet RAB Setup after Speech RAB Setup in Cell DCH”. |
– HANDOVER FROM UTRAN COMMAND
Table 4.7B.1-2: HANDOVER FROM UTRAN COMMAND
Derivation Path: 25.331, clause 10.2.15 |
|||
Information Element |
Value/remark |
Comment |
Condition |
Message Type |
|||
Integrity check info |
|||
– Message authentication code |
SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I. |
||
– RRC Message sequence number |
SS provides the value of this IE, from its internal counter. |
||
SR-VCC Info |
Not present |
||
Activation time |
Now |
||
RAB Info |
|||
– RAB identity |
0000 0101B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity. |
||
– CN domain identity |
PS domain |
||
– NAS Synchronization Indicator |
Not present |
||
– Re-establishment timer |
Use T315 |
||
Inter-system message |
|||
– CHOICE System type |
E-UTRA |
||
– E-UTRA message |
RRCConnectionReconfiguration using condition HO-TO-EUTRA(1,0) |
See Table 4.6.1-8 |
– MEASUREMENT CONTROL
Table 4.7B.1-3: MEASUREMENT CONTROL
Derivation Path: 25.331, clause 10.2.17 |
|||||||
Information Element |
Value/remark |
Comment |
Condition |
||||
Message Type |
|||||||
RRC transaction identifier |
Arbitrarily selects an unused integer between 0 to 3 |
||||||
Integrity check info |
|||||||
– Message authentication code |
SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I. |
||||||
– RRC message sequence number |
SS provides the value of this IE, from its internal counter. |
||||||
Measurement Identity |
3 |
||||||
Measurement Command |
Setup |
||||||
Measurement Reporting Mode |
|||||||
– Measurement Report Transfer Mode |
Acknowledged mode RLC |
||||||
– Periodical Reporting/Event Trigger Reporting Mode |
Event trigger |
||||||
Additional measurement list |
Not present |
||||||
CHOICE Measurement type |
Inter-RAT measurement |
||||||
– CHOICE Inter-RAT measurement objects |
E-UTRA frequency list |
||||||
– CHOICE E-UTRA frequency removal |
Remove no frequencies |
||||||
– New frequencies |
|||||||
– E-UTRA carrier frequency |
Downlink EARFCN of E-UTRA Cell |
||||||
– E-UTRA carrier frequency |
65535 |
Band > 64 |
|||||
– EARFCN extension |
Downlink EARFCN of E-UTRA Cell |
Band > 64 |
|||||
– Measurement bandwidth |
Same downlink system bandwidth as used for E-UTRA Cell |
||||||
– Blacklisted cells list |
Not present |
||||||
– Inter-RAT measurement quantity |
|||||||
– Measurement quantity for UTRAN quality estimate |
|||||||
– Filter coefficient |
0 |
||||||
– CHOICE mode |
FDD |
FDD_UTRA |
|||||
– Measurement quantity |
CPICH Ec/N0 |
||||||
– Measurement quantity |
CPICH RSCP |
For signalling tests cases. |
|||||
– CHOICE mode |
TDD |
TDD_UTRA |
|||||
– Measurement quantity |
Primary CCPCH RSCP |
||||||
– CHOICE system |
E-UTRA |
||||||
– Measurement quantity |
RSRP |
||||||
– Filter coefficient |
0 |
||||||
– Inter-RAT reporting quantity |
|||||||
– UTRAN estimated quality |
FALSE |
||||||
– CHOICE system |
E-UTRA |
||||||
– Reporting quantity |
both |
||||||
– Reporting cell status |
Not present |
||||||
– CHOICE report criteria |
Inter-RAT measurement reporting criteria |
||||||
– Parameters required for each event |
1 entry |
||||||
– Inter-RAT event identity |
Set according to specific test. |
||||||
– Threshold own system |
-66 dB |
||||||
– W |
0 |
||||||
– Threshold other system |
-55 (-80 dBm) |
When measurement quantity is RSRP, range should be (-115..-19), the actual value = Threshold other system – 25 [dBm] |
|||||
– Hysteresis |
0 |
||||||
– Time to trigger |
10 ms |
||||||
– Reporting cell status |
|||||||
– CHOICE reported cell |
Report cells within active set or within virtual active set or of the other RAT |
||||||
– Maximum number of reported cells |
2 |
||||||
– Idle Interval Information |
Not present |
||||||
CELL_DCH measurement occasion info LCR |
LCR_TDD_UTRA |
||||||
– cellDCHMeasOccasionSequence |
1 entry |
||||||
– Pattern sequence identifier |
0 |
||||||
– Status Flag |
activate |
||||||
– Measurement purpose |
‘00001’ |
||||||
– Measurement occasion pattern sequence parameters |
|||||||
– k |
3 |
||||||
– Offset |
0 |
||||||
– M_Length |
1 |
||||||
– Timeslot Bitmap |
Not Present |
||||||
DPCH Compressed mode status info |
Not Present |
FDD_UTRA AND NOT Compressed_mode |
|||||
DPCH Compressed mode status info |
FDD_UTRA AND Compressed_mode |
||||||
– TGPS reconfiguration CFN |
(Current CFN + (250 – TTI/10msec)) mod 256 |
||||||
– Transmission gap pattern sequence |
1 entry |
||||||
– TGPSI |
1 |
||||||
– TGPS Status Flag |
activate |
||||||
– TGCFN |
(Current CFN + (252 – TTI/10msec)) mod 256 |
||||||
DPCH Compressed mode status info |
Not present |
TDD_UTRA |
Condition |
Explanation |
FDD_UTRA |
FDD UTRA cell environment |
TDD_UTRA |
TDD UTRA cell environment |
LCR_TDD_UTRA |
LCR TDD UTRA cell environment |
Compressed_mode |
The UE Support of Compressed mode (TS 36.523-2 table A.4.4-1/28). |
Band > 64 |
If band > 64 is selected |
– MEASUREMENT REPORT
Table 4.7B.1-4: MEASUREMENT REPORT
Derivation Path: 25.331, clause 10.2.19 |
|||
Information Element |
Value/remark |
Comment |
Condition |
Message Type |
|||
Integrity check info |
|||
– Message authentication code |
This IE is checked to see if it is present. The value is compared against the XMAC-I value computed by SS. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I. |
||
– RRC Message sequence number |
This IE is checked to see if it is present. The value is used by SS to compute the XMAC-I value. |
||
Activation time |
(256+CFN-(CFN MOD 8 + 8)) MOD 256 |
||
Measurement identity |
3 |
||
Measured Results |
Not present |
||
Measured results on RACH |
Not present |
||
Additional measured results |
Not present |
||
Event results |
Not present |
||
Inter-RAT cell info indication |
Not present |
||
E-UTRA Measured Results |
|||
– E-UTRA measured results list |
1 entry |
||
– E-UTRA Carrier Frequency |
|||
– Measured E-UTRA cells |
1 entry |
||
– Physical Cell Identity |
PhysicalCellIdentity of E-UTRA Cell |
||
– RSRP |
Set according to specific test. |
||
– RSRQ |
Set according to specific test. |
||
E-UTRA Event Results |
|||
– Inter-RAT event identity |
Set according to specific test. |
||
– E-UTRA events results list |
1 entry |
||
– E-UTRA Carrier Frequency |
Downlink EARFCN of E-UTRA Cell |
||
– E-UTRA Carrier Frequency |
65535 |
Band > 64 |
|
– Reported cells |
1 entry |
||
– Physical Cell Identity |
PhysicalCellIdentity of E-UTRA Cell |
||
– E-UTRA events results extension list |
Band > 64 |
||
– EARFCN extension |
Downlink EARFCN of E-UTRA Cell |
Condition |
Explanation |
Band > 64 |
If band > 64 is selected |
– PHYSICAL CHANNEL RECONFIGURATION
Table 4.7B.1-5: PHYSICAL CHANNEL RECONFIGURATION
Derivation Path: 25.331, clause 10.2.22 |
|||
Information Element |
Value/remark |
Comment |
Condition |
Message Type |
|||
RRC transaction identifier |
Arbitrarily selects an unused integer between 0 to 3 |
||
Integrity check info |
|||
– Message authentication code |
SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I. |
||
– RRC message sequence number |
SS provides the value of this IE, from its internal counter. |
||
Integrity protection mode info |
Not Present |
||
Ciphering mode info |
Not Present |
||
Activation time |
Not Present |
||
Delay restriction flag |
Not Present |
||
New U-RNTI |
Not Present |
||
New C-RNTI |
Not Present |
||
New H-RNTI |
Not Present |
||
New Primary E-RNTI |
Not Present |
||
New Secondary E-RNTI |
Not Present |
||
RRC State indicator |
CELL_DCH |
||
UE Mobility State Indicator |
Not Present |
||
UTRAN DRX cycle length coefficient |
Not Present |
||
CN information info |
Not Present |
||
URA identity |
Not Present |
||
RNC support for change of UE capability |
Not Present |
||
Reconfiguration in response to requested change of UE capability |
Not Present |
||
Downlink counter synchronization info |
Not Present |
||
Frequency info |
Not Present |
||
DTX-DRX timing information |
Not Present |
||
DTX-DRX Information |
Not Present |
||
HS-SCCH less Information |
Not Present |
||
MIMO parameters |
Not Present |
||
HARQ Info |
Not Present |
||
Maximum allowed UL TX power |
Not Present |
||
CHOICE channel requirement |
Not Present |
||
E-DCH Info |
Not Present |
||
Downlink HS-PDSCH Information |
Not Present |
||
Downlink information common for all radio links |
|||
– Downlink DPCH info common for all RL |
Not Present |
||
– DPCH compressed mode info |
Not Present |
TDD |
|
– DPCH compressed mode info |
FDD |
||
– TGPSI |
1 |
||
– TGPS Status Flag |
Deactivate |
||
– TGCFN |
Not Present |
||
– Transmission gap pattern sequence configuration parameters |
|||
– TGMP |
E-UTRA measurement |
||
– TGPRC |
Infinity |
||
– TGSN |
8 |
||
– TGL1 |
10 |
||
– TGL2 |
Not Present |
||
– TGD |
undefined |
||
– TGPL1 |
12 |
||
– TGPL2 |
Not Present |
||
– RPP |
Mode 0 |
||
– ITP |
Mode 0 |
||
– CHOICE UL/DL Mode |
UL and DL, UL only or DL only (depending on the UE capability) |
||
– Downlink compressed mode method |
HLS(or not sent, depending on the UE capability) |
||
– Uplink compressed mode method |
HLS(or not sent, depending on the UE capability) |
||
– Downlink frame type |
B |
||
– DeltaSIR1 |
20 (2.0) |
||
– DeltaSIRAfter1 |
10 (1.0) |
||
– DeltaSIR2 |
Not Present |
||
– DeltaSIRAfter2 |
Not Present |
||
– N identify abort |
Not Present |
||
– T Reconfirm abort |
Not Present |
||
– TX Diversity mode |
Not Present |
||
– SSDT information |
Not Present |
||
– Default DPCH Offset Value |
Not Present |
||
Downlink information for each radio link |
Not Present |
||
MBMS PL Service Restriction Information |
Not Present |
– PHYSICAL CHANNEL RECONFIGURATION COMPLETE
Table 4.7B.1-6: PHYSICAL CHANNEL RECONFIGURATION COMPLETE
Derivation Path: 25.331, clause 10.2.23 |
|||
Information Element |
Value/remark |
Comment |
Condition |
Message Type |
|||
Integrity check info |
|||
– Message authentication code |
This IE is checked to see if it is present. The value is compared against the XMAC-I value computed by SS. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I. |
||
– RRC Message sequence number |
This IE is checked to see if it is present. The value is used by SS to compute the XMAC-I value. |
||
Uplink integrity protection activation info |
Not checked |
||
COUNT-C activation time |
Not checked |
||
Uplink counter synchronization info |
Not checked |
– RRC CONNECTION REQUEST
Table 4.7B.1-7: RRC CONNECTION REQUEST
Derivation Path: 25.331, clause 10.2.39 |
|||
Information Element |
Value/remark |
Comment |
Condition |
Message Type |
|||
Predefined configuration status information |
To be checked against requirement if specified |
||
Initial UE identity |
|||
– CHOICE UE id type |
|||
– TMSI and LAI (GSM-MAP) |
Set to the UE’s TMSI and LAI. |
||
Establishment cause |
To be checked against requirement if specified |
||
Protocol error indicator |
FALSE |
||
UE Specific Behaviour Information 1 idle |
This IE will not be checked by default behaviour, but in specific test case. |
||
Domain indicator |
Not checked |
||
Call type |
Not checked |
||
UE capability indication |
Not checked |
||
MBMS Selected Services |
Not checked |
||
Support for F-DPCH |
Not checked |
||
UE Mobility State Indicator |
Not Present |
||
Support for Enhanced F-DPCH |
Not checked |
||
HS-PDSCH in CELL_FACH |
Not checked |
||
MAC-ehs support |
Not checked |
||
DPCCH Discontinuous Transmission support |
Not checked |
||
Support of common E-DCH |
Not checked |
REL-8 |
|
Multi cell support |
Not checked |
REL-8 |
|
Pre-redirection info |
Not checked |
REL-8 |
|
Support of MAC-i/is |
Not checked |
REL-8 |
|
Support of SPS operation |
Not checked |
REL-8 |
|
Support for CS Voice over HSPA |
Not checked |
REL-8 |
|
Dual cell MIMO support |
Not checked |
REL-9 |
|
System Information Container Stored Indicator |
Not checked |
REL-9 |
|
Measured results on RACH |
Not checked |
||
Access stratum release indicator |
Not checked |
– SECURITY MODE COMMAND
Table 4.7B.1-n: SECURITY MODE COMMAND
Derivation Path: 25.331, clause 10.2.43 |
|||
Information Element |
Value/remark |
Comment |
Condition |
FFS |
– SECURITY MODE COMPLETE
Table 4.7B.1-n: SECURITY MODE COMPLETE
Derivation Path: 25.331, clause 10.2.44 |
|||
Information Element |
Value/remark |
Comment |
Condition |
FFS |
– UTRAN MOBILITY INFORMATION
Table 4.7B.1-n: UTRAN MOBILITY INFORMATION
Derivation Path: 34.108 clause 9.1.1 (UTRAN MOBILITY INFORMATION message) |
||||
Information Element |
Value/remark |
Comment |
Condition |
|
UTRAN MOBILITY INFORMATION |
||||
CN information info |
||||
– PLMN identity |
Not present |
|||
– CN common GSM-MAP NAS system information |
||||
– GSM-MAP NAS system information |
00 01H |
|||
– CN domain related information |
||||
– CN domain identity |
PS |
|||
– CN domain specific NAS system information |
||||
– GSM-MAP NAS system information |
01 00H |
|||
– CN domain specific DRX cycle length coefficient |
7 |
|||
– CN domain identity |
CS |
|||
– CN domain specific NAS system information |
||||
– GSM-MAP NAS system information |
1E 01H |
|||
– CN domain specific DRX cycle length coefficient |
7 |
– UTRAN MOBILITY INFORMATION CONFIRM
Table 4.7B.1-n: UTRAN MOBILITY INFORMATION CONFIRM
Derivation Path: 34.108 clause 9.1.1 (UTRAN MOBILITY INFORMATION CONFIRM message) |
4.7B.2 UTRA NAS messages
This section contains default message contents for UTRA NAS messages.
In 3GPP TS 36.523-1 [18]:
– UTRA NAS messages are defined as exceptions, IE by IE, to the messages defined in this section;
– UTRA NAS messages not defined in this section are specified completely.
The following messages are not specified in this section:
– AUTHENTICATION REQUEST (CS)
– AUTHENTICATION RESPONSE (CS)
– DETACH REQUEST (CS & PS)
– DETACH ACCEPT (CS & PS)
– IDENTITY REQUEST (CS & PS)
– IDENTITY RESPONSE (CS & PS)
– P-TMSI REALLOCATION COMMAND (PS)
– P-TMSI REALLOCATION COMPLETE (PS)
– SERVICE REQUEST (PS)
Table 4.7B.2-1: ROUTING AREA UPDATE REQUEST
Derivation path: 24.008 table 9.4.14 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
Update type |
000 ‘RA updating’ or |
In NMO I, depending on capability and domain preference for voice and SMS, the UE may initiate either PS only or CS/PS registration procedures. |
|
GPRS ciphering key sequence number |
Any allowed value |
||
Old routing area identification |
Any allowed value |
||
MS Radio Access capability |
Any allowed value |
The checking of this IE is expected to be covered in UMTS test cases. |
|
Old P-TMSI signature |
Not present or any allowed value |
For test cases where no "UE" statement indicates that a P-TMSI signature was previously registered, whether or not the UE includes this IE depends on previous USIM contents. |
|
Requested READY timer value |
Not present or any allowed value |
The checking of this IE is expected to be covered in UMTS test cases. |
|
DRX parameter |
Not present or any allowed value |
The checking of this IE is expected to be covered in UMTS test cases. |
|
TMSI status |
0 ‘no valid TMSI available’ or not present |
||
P-TMSI |
Not present or any allowed value |
||
MS network capability |
Any allowed value |
The checking of this IE is expected to be covered in UMTS test cases. |
|
PDP context status |
Any allowed value |
The checking of this IE is expected to be covered in UMTS test cases. |
|
PS LCS Capability |
Not present or any allowed value |
The checking of this IE is expected to be covered in UMTS test cases. |
|
MBMS context status |
Not present |
||
UE network capability |
Any allowed value (must be present) |
No detailed checking by default but should be aligned with PICS |
|
Additional mobile identity |
Not present or any allowed value |
||
Additional old routing area identification |
Not present or any allowed value |
||
Mobile station classmark 2 |
Not present or any allowed value |
This IE shall be included if the MS supports SRVCC to GERAN or UTRAN. |
|
Mobile station classmark 3 |
Not present or any allowed value |
This IE shall be included if the MS supports SRVCC to GERAN. |
|
Supported Codecs |
Not present or any allowed value |
||
Voice domain preference and UE’s usage setting |
Not present or any allowed value |
Rel-9 |
|
P-TMSI type |
Any allowed value |
Rel-10 |
Table 4.7B.2-2: ROUTING AREA UPDATE ACCEPT
Derivation path: 24.008 table 9.4.15 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
Force to standby |
0 ‘Force to standby not indicated’ |
||
Update result |
000 ‘RA updated’ |
IF the UE indicated 000 ‘RA updating’ in the previous RAU request message |
|
001 ‘combined RA/LA updated’ |
IF the UE indicated 001 ‘combined RA/LA updating’ in the previous RAU request message |
||
1 ‘No follow-on proceed’ |
|||
Periodic RA update timer |
111 (deactivated) |
||
Routing area identification |
1 |
Value in table 4.4.4-2 for simulated UTRA cells. |
|
P-TMSI signature |
Arbitrary value |
||
Allocated P-TMSI |
Arbitrary value |
2 most significant bits = 11 to indicate SGSN |
|
MS identity |
Not present |
Is never present in case of RA only procedure, and RA/LA procedures do not necessarily change TMSI |
|
List of Receive N PDU Numbers |
Not present |
Realistic network value |
|
Negotiated READY timer value |
Not present |
||
GMM cause |
Not present |
||
T3302 value |
Not present |
||
Cell Notification |
Not present |
This IE is for A/Gb mode only. |
|
Equivalent PLMNs |
Not present |
||
PDP context status |
Same value as the one received in the RAU request message |
UTRAN |
|
PDP context status |
0 |
NSAPI(0) – NSAPI(15) is set to 0, which means that the SM state of all PDP contexts is PDP-INACTIVE |
GERAN |
Network feature support |
Not present |
||
Emergency Number List |
Not present |
||
MBMS context status |
Not present |
||
Requested MS Information |
Not present |
||
T3319 value |
Not present |
||
T3323 value |
Not present |
Condition |
Explanation |
UTRAN |
UTRAN cell environment |
GERAN |
GERAN cell environment |
Table 4.7B.2-3: ROUTING AREA UPDATE COMPLETE
Derivation path: 24.008 table 9.4.16 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
List of Receive N PDU Numbers |
Not present |
||
Inter RAT handover information |
Not present |
||
E-UTRAN inter RAT handover information |
Not present |
Table 4.7B.2-4: LOCATION UPDATING REQUEST
Derivation path: 24.008 table 9.2.17 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
Location updating type |
Any allowed value |
||
Ciphering key sequence number |
Any allowed value |
||
Location area identification |
Any allowed value |
||
Mobile station classmark |
Any allowed value |
||
Mobile identity |
Any allowed value |
||
Mobile station classmark for UMTS |
Any allowed value |
||
Additional update parameters |
Not present or any allowed value |
Table 4.7B.2-5: LOCATION UPDATING ACCEPT
Derivation path: 24.008 table 9.2.15 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
Location area identification |
1 |
||
Mobile identity |
|||
TMSI |
Arbitrary value |
2 most significant bits = 00 to indicate VLR |
|
Follow on proceed |
Present |
This IE is unncessary in non-CS fallback test cases. |
|
CTS permission |
Absent |
||
Equivalent PLMNs |
Absent |
||
Emergency Number List |
Absent |
Table 4.7B.2-6: ATTACH REQUEST
Derivation path: 24.008 table 9.4.1 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
MS network capability |
Any allowed value |
||
Attach type |
001 ‘GPRS attach’ or |
||
GPRS ciphering key sequence number |
Any allowed value |
||
DRX parameter |
Any allowed value |
||
P-TMSI or IMSI |
Any allowed value |
||
Old routing area identification |
Any allowed value |
||
MS Radio Access capability |
Any allowed value |
||
Old P-TMSI signature |
Not present or any allowed value |
||
Requested READY timer value |
Not present or any allowed value |
||
TMSI status |
0 ‘no valid TMSI available’ or not present |
||
PS LCS Capability |
Not present or any allowed value |
||
Mobile station classmark 2 |
Not present or any allowed value |
||
Mobile station classmark 3 |
Not present or any allowed value |
||
Supported Codecs |
Not present or any allowed value |
||
UE network capability |
Any allowed value (must be present) |
||
Additional mobile identity |
Not present or any allowed value |
||
Additional old routing area identification |
Not present or any allowed value |
||
Voice domain preference and UE’s usage setting |
Not present or any allowed value |
Rel-9 |
|
P-TMSI type |
Not present or any allowed value |
Rel-10 |
Table 4.7B.2-7: ATTACH ACCEPT
Derivation path: 24.008 table 9.4.2 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
Attach result |
001 ‘GPRS only attached’ |
IF the UE indicated 001 ‘GPRS attach’ in the previous attach request message |
|
011 ‘combined GPRS/IMSI attached’ |
IF the UE indicated 011 ‘Combined GPRS/IMSI attach’ in the previous attach request message |
||
Force to standby |
000 ‘Force to standby not indicated’ |
||
Periodic RA update timer |
111 (deactivated) |
||
Radio priority for SMS |
100 ‘priority level 4 (lowest)’ |
||
Radio priority for TOM8 |
100 ‘priority level 4 (lowest)’ |
||
Routing area identification |
1 |
||
P-TMSI signature |
Arbitrary value |
||
Negotiated READY timer value |
Not present |
||
Allocated P-TMSI |
Arbitrary value |
2 most significant bits = 11 to indicate SGSN |
|
MS identity |
Not present |
IF the UE indicated 001 ‘GPRS attach’ in the previous attach request message |
|
Arbitrary value |
2 most significant bits = 00 to indicate VLR |
IF the UE indicated 011 ‘Combined GPRS/IMSI attach’ in the previous attach request message |
|
GMM cause |
Not present |
||
T3302 value |
Not present |
||
Cell Notification |
Not present |
||
Equivalent PLMNs |
Not present |
||
Network feature support |
Not present |
||
Emergency Number List |
Not present |
||
Requested MS Information |
Not present |
||
T3319 value |
Not present |
||
T3323 value |
Not present |
Table 4.7B.2-8: ATTACH COMPLETE
Derivation path: 24.008 table 9.4.3 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
Inter RAT handover information |
Not present |
||
E-UTRAN inter RAT handover information |
Not present |
Table 4.7B.2-9: AUTHENTICATION AND CIPHERING REQUEST
Derivation path: 24.008 table 9.4.9 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
Ciphering algorithm |
Any allowed value |
||
IMEISV request |
000 ‘IMEISV not requested’ |
||
Force to standby |
000 ‘Force to standby not indicated’ |
||
A&C reference number |
Any allowed value |
Table 4.7B.2-10: AUTHENTICATION AND CIPHERING RESPONSE
Derivation path: 24.008 table 9.4.10 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
A&C reference number |
Arbitrary value |
||
Spare half octet |
0000 |
Table 4.7B.2-11: TMSI REALLOCATION COMMAND
Derivation path: 24.008 table 9.2.20 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
Location area identification |
Any allowed value |
||
Mobile identity |
Any allowed value |
Table 4.7B.2-12: TMSI REALLOCATION COMPLETE
Derivation path: 24.008 table 9.2.21 |
Table 4.7B.2-13: CM SERVICE REQUEST
Derivation path: 24.008 table 9.2.11 |
|||
Information Element |
Value/Remark |
Comment |
Condition |
CM service type |
Any allowed value |
||
Ciphering key sequence number |
Any allowed value |
||
Mobile station classmark |
Any allowed value |
||
Mobile identity |
Any allowed value |
||
Priority |
Not present or any allowed value |
||
Additional update parameters |
Not present or any allowed value |