4.7A Default TC message and information element contents
36.5083GPPCommon test environments for User Equipment (UE) conformance testingEvolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC)Release 17TS
This clause contains the default values of common TC (Test Control, see [38]) messages and information elements, which apply to all test cases unless otherwise specified. All the messages and information elements are listed in alphabetical order.
– ACTIVATE TEST MODE
This message is sent by the SS to the UE embedded in a RRC DLInformationTransfer message.
Table 4.7A-1: ACTIVATE TEST MODE
|
Derivation Path: 36.509 clause 6.5 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 0 1 0 0 |
|||
|
UE test loop mode |
0 0 0 0 0 0 0 0 |
UE test loop mode A |
UE TEST LOOP MODE A (default) |
|
|
UE test loop mode |
0 0 0 0 0 0 0 1 |
UE test loop mode B |
UE TEST LOOP MODE B |
|
|
UE test loop mode |
0 0 0 0 0 0 1 0 |
UE test loop mode C |
UE TEST LOOP MODE C |
|
|
UE test loop mode |
0 0 0 0 0 011 |
UE test loop mode D |
UE TEST LOOP MODE D |
|
|
UE test loop mode |
0 0 0 0 0 1 0 0 |
UE test loop mode E |
UE TEST LOOP MODE E |
|
|
UE test loop mode |
0 0 0 0 0 1 0 1 |
UE test loop mode F |
UE TEST LOOP MODE F |
|
|
Condition |
Explanation |
|
UE TEST LOOP MODE A |
UE test loop function configured for UE test loop mode A operation. |
|
UE TEST LOOP MODE B |
UE test loop function configured for UE test loop mode B operation. |
|
UE TEST LOOP MODE C |
UE test loop function configured for UE test loop mode C operation. |
|
UE TEST LOOP MODE D |
UE test loop function configured for UE test loop mode D operation. |
|
UE TEST LOOP MODE E |
UE test loop function configured for UE test loop mode E operation. |
|
UE TEST LOOP MODE F |
UE test loop function configured for UE test loop mode F operation. |
– ACTIVATE TEST MODE COMPLETE
This message is sent by the UE to the SS embedded in a RRC ULInformationTransfer message.
Table 4.7A-2: ACTIVATE TEST MODE COMPLETE
|
Derivation Path: 36.509 clause 6.6 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 0 1 0 1 |
|||
– CLOSE UE TEST LOOP
This message is sent by the SS to the UE embedded in a RRC DLInformationTransfer message.
Table 4.7A-3: CLOSE UE TEST LOOP
|
Derivation Path: 36.509 clause 6.1 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 0 0 0 0 |
|||
|
UE test loop mode |
0 0 0 0 0 0 0 0 |
UE test loop mode A |
UE TEST LOOP MODE A (default) |
|
|
UE test loop mode A LB setup |
||||
|
Length of UE test loop mode A LB setup list in bytes |
0 |
No LB setup list. No scaling (UL RLC SDU size will be equal to the received DL SDU size) |
||
|
UE test loop mode B LB setup |
Not present |
|||
|
UE test loop mode C LB setup |
Not present |
|||
|
UE test loop mode D LB setup |
Not present |
|||
|
UE test loop mode E LB setup |
Not present |
|||
|
UE test loop mode F setup |
Not present |
|||
|
UE test loop mode |
0 0 0 0 0 0 0 1 |
UE test loop mode B |
UE TEST LOOP MODE B |
|
|
UE test loop mode A LB setup |
Not present |
|||
|
UE test loop mode B LB setup |
||||
|
IP PDU delay |
0 0 0 0 0 0 0 0 |
No delay |
||
|
UE test loop mode C LB setup |
Not present |
|||
|
UE test loop mode D LB setup |
Not present |
|||
|
UE test loop mode E LB setup |
Not present |
|||
|
UE test loop mode F setup |
Not present |
|||
|
UE test loop mode |
0 0 0 0 0 0 1 0 |
UE test loop mode C |
UE TEST LOOP MODE C |
|
|
UE test loop mode A LB setup |
Not present |
|||
|
UE test loop mode B LB setup |
Not present |
|||
|
UE test loop mode C LB setup |
MTCH ID |
|||
|
MBSFN area identity |
0 0 0 0 0 0 0 0 |
0, same value as broadcasted in the default SystemInformationBlockType13 message |
||
|
MCH identity |
0 0 0 0 0 0 0 0 |
0, same value as indicated in the default MBSFNAreaConfiguration message |
||
|
Logical channel identity |
0 0 0 0 0 0 0 1 |
1, same value as indicated in the default MBSFNAreaConfiguration message |
||
|
UE test loop mode D LB setup |
Not present |
|||
|
UE test loop mode E LB setup |
Not present |
|||
|
UE test loop mode F setup |
Not present |
|||
|
UE test loop mode |
0 0 0 0 0 0 1 1 |
UE test loop mode D |
UE TEST LOOP MODE D |
|
|
UE test loop mode A LB setup |
Not present |
|||
|
UE test loop mode B LB setup |
Not present |
|||
|
UE test loop mode C LB setup |
Not present |
|||
|
UE test loop mode D LB setup |
||||
|
Discovery Announce or Monitor |
0 0 0 0 0 0 0 0 |
0, triggered to monitor sidelink direct discovery by default. |
||
|
Length of UE test loop mode D Monitor list in bytes |
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
0 byte because by default no specific App code is monitored individually. The UE will collectively monitor all App codes. |
||
|
UE test loop mode E LB setup |
Not present |
|||
|
UE test loop mode F setup |
Not present |
|||
|
UE test loop mode |
0 0 0 0 0 1 0 0 |
UE test loop mode E |
UE TEST LOOP MODE E |
|
|
UE test loop mode A LB setup |
Not present |
|||
|
UE test loop mode B LB setup |
Not present |
|||
|
UE test loop mode C LB setup |
Not present |
|||
|
UE test loop mode D LB setup |
Not present |
|||
|
UE test loop mode E LB setup |
||||
|
Length of UE test loop mode E Monitor setup contents in bytes |
0 0 0 0 0 0 0 1 |
1 to account for first 1 octet which is always present. By default no specific Group Destination ID code is monitored individually. The UE will collectively monitor packets for all Group Destination IDs. |
||
|
Communication Transmit or Receive |
0 0 0 0 0 0 0 0 |
0, triggered to receive sidelink direct communication by default. |
||
|
UE test loop mode F setup |
Not present |
|||
|
UE test loop mode |
0 0 0 0 0 1 0 0 |
UE test loop mode E |
UE TEST LOOP MODE E (V2X Reception) |
|
|
UE test loop mode A LB setup |
Not present |
|||
|
UE test loop mode B LB setup |
Not present |
|||
|
UE test loop mode C LB setup |
Not present |
|||
|
UE test loop mode D LB setup |
Not present |
|||
|
UE test loop mode E LB setup |
||||
|
Length of UE test loop mode E Monitor setup contents in bytes |
0 0 0 0 0 0 0 1 |
1 to account for first 1 octet which is always present. By default no specific Group Destination ID code is monitored individually. The UE will collectively monitor packets for all Group Destination IDs. |
||
|
Communication Transmit or Receive |
0 0 0 0 0 0 1 0 |
‘10’ indicates V2X UE triggered to receive V2X communication by default. |
||
|
UE test loop mode F setup |
Not present |
|||
|
UE test loop mode |
0 0 0 0 0 1 0 0 |
UE test loop mode E |
UE TEST LOOP MODE E(V2X Transmission) |
|
|
UE test loop mode A LB setup |
Not present |
|||
|
UE test loop mode B LB setup |
Not present |
|||
|
UE test loop mode C LB setup |
Not present |
|||
|
UE test loop mode D LB setup |
Not present |
|||
|
UE test loop mode E LB setup |
||||
|
Length of UE test loop mode E Monitor setup contents in bytes |
0 0 0 0 0 0 0 1 |
1 to account for first 1 octet which is always present. By default no specific Group Destination ID code is monitored individually. The UE will collectively monitor packets for all Group Destination IDs. |
||
|
Communication Transmit or Receive |
0 0 0 0 0 0 1 1 |
‘11’ indicates V2X UE triggered to transmit V2Xcommunication by default. |
||
|
UE test loop mode F setup |
Not present |
|||
|
UE test loop mode |
0 0 0 0 0 1 0 1 |
UE test loop mode F |
UE TEST LOOP MODE F |
|
|
UE test loop mode A LB setup |
Not present |
|||
|
UE test loop mode B LB setup |
Not present |
|||
|
UE test loop mode C LB setup |
Not present |
|||
|
UE test loop mode D LB setup |
Not present |
|||
|
UE test loop mode E LB setup |
Not present |
|||
|
UE test loop mode F setup |
SC-MTCH ID |
|||
|
g-RNTI |
‘0100’H |
same value as indicated in the default SCPTM-Configuration message |
||
|
Condition |
Explanation |
|
UE TEST LOOP MODE A |
UE test loop function configured for UE test loop mode A operation. |
|
UE TEST LOOP MODE B |
UE test loop function configured for UE test loop mode B operation. |
|
UE TEST LOOP MODE C |
UE test loop function configured for UE test loop mode C operation. |
|
UE TEST LOOP MODE D |
UE test loop function configured for UE test loop mode D operation. |
|
UE TEST LOOP MODE E |
UE test loop function configured for UE test loop mode E operation. |
|
UE TEST LOOP MODE E (V2X Reception) |
UE test loop function configured for UE test loop mode E operation with V2X reception. |
|
UE TEST LOOP MODE E(V2X Transmission) |
UE test loop function configured for UE test loop mode E operation with V2X transmission. |
|
UE TEST LOOP MODE F |
UE test loop function configured for UE test loop mode F operation. |
– CLOSE UE TEST LOOP COMPLETE
This message is sent by the UE to the SS embedded in a RRC ULInformationTransfer message.
Table 4.7A-4: CLOSE UE TEST LOOP
|
Derivation Path: 36.509 clause 6.2 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 0 0 0 1 |
|||
– DEACTIVATE TEST MODE
This message is sent by the SS to the UE embedded in a RRC DLInformationTransfer message.
Table 4.7A-5: DEACTIVATE TEST MODE
|
Derivation Path: 36.509 clause 6.7 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 0 1 1 0 |
|||
– DEACTIVATE TEST MODE COMPLETE
This message is sent by the UE to the SS embedded in a RRC ULInformationTransfer message.
Table 4.7A-6: DEACTIVATE TEST MODE COMPLETE
|
Derivation Path: 36.509 clause 6.8 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 0 1 1 1 |
|||
– OPEN UE TEST LOOP
This message is sent by the SS to the UE embedded in a RRC DLInformationTransfer message.
Table 4.7A-7: OPEN UE TEST LOOP
|
Derivation Path: 36.509 clause 6.3 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 0 0 1 0 |
|||
– OPEN UE TEST LOOP COMPLETE
This message is sent by the UE to the SS embedded in a RRC ULInformationTransfer message.
Table 4.7A-8: OPEN UE TEST LOOP COMPLETE
|
Derivation Path: 36.509 clause 6.4 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 0 0 1 1 |
|||
– UE TEST LOOP MODE C MBMS PACKET COUNTER REQUEST
This message is sent by the SS to the UE embedded in a RRC DLInformationTransfer message.
Table 4.7A-9: UE TEST LOOP MODE C MBMS PACKET COUNTER REQUEST
|
Derivation Path: 36.509 clause 6.10 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 1 0 0 1 |
|||
– UE TEST LOOP MODE C MBMS PACKET COUNTER RESPONSE
This message is sent by the UE to the SS embedded in a RRC ULInformationTransfer message.
Table 4.7A-10: UE TEST LOOP MODE C MBMS PACKET COUNTER RESPONSE
|
Derivation Path: 36.509 clause 6.11 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 1 0 1 1 |
|||
|
MBMS Packet Counter Value |
||||
– UE TEST LOOP PROSE PACKET COUNTER REQUEST
This message is sent by the SS to the UE embedded in a RRC DLInformationTransfer message.
Table 4.7A-11: UE TEST LOOP PROSE PACKET COUNTER REQUEST
|
Derivation Path: 36.509 clause 6.13 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 1 1 0 0 |
|||
– UE TEST LOOP PROSE PACKET COUNTER RESPONSE
This message is sent by the UE to the SS embedded in a RRC ULInformationTransfer message.
Table 4.7A-12: UE TEST LOOP PROSE PACKET COUNTER RESPONSE
|
Derivation Path: 36.509 clause 6.14 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 1 1 0 1 |
|||
|
ProSe Direct Discovery Packet Counter(s)Value |
Mode D |
|||
|
ProSe Direct Communication PSCCH Packet Counter(s) Value |
Mode E |
|||
|
ProSe Direct Communication STCH Packet Counter(s) Value |
Mode E |
|||
|
Condition |
Explanation |
|
Mode D |
This IE is present if UE test loop function is configured for UE test loop mode D operation else it shall be absent. |
|
Mode E |
This IE is present if UE test loop function is configured for UE test loop mode E operation else it shall be absent |
– UE TEST LOOP MODE F SCPTM PACKET COUNTER REQUEST
This message is sent by the SS to the UE embedded in a RRC DLInformationTransfer message.
Table 4.7A-13: UE TEST LOOP MODE F SCPTM PACKET COUNTER REQUEST
|
Derivation Path: 36.509 clause 6.15 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 1 1 1 0 |
|||
– UE TEST LOOP MODE F SCPTM PACKET COUNTER RESPONSE
This message is sent by the UE to the SS embedded in a RRC ULInformationTransfer message.
Table 4.7A-14: UE TEST LOOP MODE F SCPTM PACKET COUNTER RESPONSE
|
Derivation Path: 36.509 clause 6.16 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
Protocol discriminator |
1 1 1 1 |
|||
|
Skip indicator |
0 0 0 0 |
|||
|
Message type |
1 0 0 0 1 1 1 1 |
|||
|
SCPTM Packet Counter Value |
||||