ForewordIntroduction1 Scope2 References3 Definitions, symbols and abbreviations4 Common test environment4.1 Environmental conditions4.2 Common requirements of test equipment4.3 Reference test conditions4.3 Reference test conditions4.3.1 Test frequencies4.3.2 Radio conditions4.3.3 Physical channel allocations4.3.4 Signal levels4.3.5 Standard test signals4.3.6 Physical layer parameters4.4 Reference system configurations4.4 Reference system configurations4.4.1 Simulated network scenarios4.4.2 Simulated cells4.4.3 Common parameters for simulated E-UTRA cells4.4.4 Common parameters for simulated UTRA cells4.4.5 Common parameters for simulated GERAN cells4.4.6 Common parameters for simulated CDMA2000 cells4.4.7 Default parameters specific for simulated cells4.4.8 Common parameters for simulated WLAN AP’s4.4.9 Common parameters for simulated Bluetooth beacon’s4.5 Generic procedures4.5A Other generic procedures4.6 Default RRC message and information elements contents4.6 Default RRC message and information elements contents4.6.1 Contents of RRC messages4.6.2 System information blocks4.6.3 Radio resource control information elements4.6.4 Security control information elements4.6.5 Mobility control information elements4.6.6 Measurement information elements4.6.7 Other information elements4.6.8 Channel-bandwidth-dependent parameters4.7 Default NAS message and information element contents4.7A Default TC message and information element contents4.7B Default UTRA message and information element contents4.7C Default DS-MIPv6 message and information element contents4.7D Default GERAN message and information element contents4.7E Default HTTP messages for communication with the ProSe Function4.7F Default ProSe messages4.7G Default IKEv2 message and information element contents4.7H Default TLS message and information element contents4.7I Default AT Command message and information element4.8 Reference radio bearer configurations4.9 Common test USIM, CSIM and ISIM parameters4.10 V2X reference configuration4.11 GNSS Requirements for V2X and MCS testing4.12 GNSS Requirements for aerial testing5 Test environment for RF test6 Test environment for Signalling test6.1 Requirements of test equipment6.2 Reference test conditions6.3 Reference system configurations6.4 Generic procedures6.5 Default RRC message and information element contents6.6 Default NAS message and information element contents6.6A Default SMS over SGs message and information element contents6.6B Reference radio bearer configurations6.7 Timer Tolerances6.8 SideLink reference configuration7 Test environment for RRM tests8 NB-IoT test environment8.1 NB-IoT Common test environment8.1.1 NB-IoT Environmental conditions8.1.2 NB-IoT Common requirements of test equipment8.1.3 NB-IoT Reference test conditions8.1.4 NB-IoT Reference system configurations8.1.5 NB-IoT Generic procedures8.1.5A Other generic procedures8.1.6 NB-IoT Default RRC message and information elements contents8.1.7 NB-IoT Default NAS message and information element contents8.1.7A NB-IoT Default TC message and information element contents8.1.8 NB-IoT Reference radio bearer configurations8.1.9 NB-IoT Common test USIM parameters8.2 NB-IoT Test environment for RF test8.3 NB-IoT Test environment for Signalling test8.4 NB-IOT Test environment for RRM tests8.4 NB-IOT Test environment for RRM tests8.4.1 NB-IoT Requirements of test equipment8.4.2 NB-IoT RRM Reference system configurations8.4.2A NB-IoT Generic RRM procedures8.4.3 NB-IoT Default RRC message and information elements contents8.4.4 NB-IoT Default NAS message and information elements contents8.4.5 NB-IoT Reference radio bearer configurations 4.6.2 System information blocks 36.5083GPPCommon test environments for User Equipment (UE) conformance testingEvolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC)Release 17TS Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM See subclause 4.4.3.3 in this document.