4.4.5 Common parameters for simulated GERAN cells

36.5083GPPCommon test environments for User Equipment (UE) conformance testingEvolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC)Release 17TS

The parameters specified in this subclause apply to all simulated GERAN cells unless otherwise specified.

See TS 51.010 [25].

The contents of SYSTEM INFORMATION TYPE 2 Quarter message specified below are identical for all GERAN cells.

Table 4.4.5-1: System Information 2 Quater

Derivation Path: 44.018 Table 10.5.2.33b.1

Information Element

Value/remark

Comment

Condition

System information 2Quater

L2 pseudo length

1

PROTOCOL DISCRIMINATOR

‘0110’B

RR management Protocol

SKIP INDICATOR

‘0000’B

MESSAGE TYPE

‘00000111’B

SI 2QUATER REST OCTETS

BA Indicator

0

3G BA Indicator

0

MP Change Mark

0

SI2Q Index

0

SI2Q Count

0

Measurement_Parameters Description

0

Not Present

GPRS_Real Time Difference Description

0

Not Present

GPRS_BSIC Description

0

Not Present

GPRS_REPORT PRIORITY Description

0

Not Present

GPRS_MEASUREMENT_Parameters Description

0

Not Present

NC Measurement Parameters

0

Not Present

extension length

0

Not Present

3G Neighbour Cell Description

0

Not Present

3G Measurement Parameters Description

0

Not Present

GPRS_3G_MEASUREMENT Parameters Description

0

Not Present

Additions in release 5

H

3G Additional Measurement Parameters Description

0

Not Present

3G ADDITIONAL MEASUREMENT Parameters Description 2

0

Not Present

Additions in release 6

H

3G_CCN_ACTIVE

0

Additions in release 7

H

700_REPORTING_OFFSET

0

Not Present

810_REPORTING_OFFSET

0

Not Present

Additions in release 8

H

Priority and E-UTRAN Parameters Description

1

Present

Serving Cell Priority Parameters Description

1

Present

Note: Values as defined from TS 45.008, section 10.4 Table 3

GERAN_PRIORITY

2

THRESH_Priority_Search

15 (always)

THRESH_GSM_low

0

H_PRIO

0

T_Reselection

0

3G Priority Parameters Description

0

Not Present

E-UTRAN Parameters Description

1

Present

E-UTRAN_CCN_ACTIVE

0

CCN not supported

E-UTRAN_Start

1

E-UTRAN_Stop

1

E-UTRAN Measurement Parameters Description

0

Not Present

GPRS E-UTRAN Measurement Parameters Description

0

Not Present

Repeated E-UTRAN Neighbour Cells {

1

Present

EARFCN

Same as cell 1

This field specifies the E-UTRA Absolute Radio Frequency Channel Number as defined in 3GPP TS 36.104.

EARFCN

65535

Band > 64

Measurement Bandwidth

Set according to EUTRA band under test

E-UTRAN_PRIORITY

‘100’B

Same as cell 1 as defined in 3GPP TS 36.104.

THRESH_E-UTRAN_high

‘00010’B

Actual value =4 dB

THRESH_E-UTRAN_low

‘00010’B

Actual value =4 dB

E-UTRAN_QRXLEVMIN

17 (-106 dBm)

For signalling test cases

0 (-140 dBm)

For RF/RRM test cases

} ** 0

End of Repeated E-UTRAN Neighbour cells structure.

Note: When this message is used in Tics where more than one E-UTRA cells are active, this structure needs to be specified for each cell.

EARFCN and EUTRAN_PRIORITY will then need to be configured to the corresponding EUTRAN cell

Repeated E-UTRAN Not Allowed Cells

0

Not Present

Repeated E-UTRAN PCID to TA mapping

0

Not Present

3G CSG Description

0

E-UTRAN CSG Description

0

Additions in release 9

L

Additions in release 9

H

Band > 64

Enhanced Cell Reselection Parameters

0

CSG Cells Reporting Description

0

Additions in release 10

H

INIT_PWR_RED

0

NC2_CSG_PCCN_permitted

0

Additions in release 11

H

Extended EARFCNs Description

1

Repeated EARFCN_extended {

1

Present

EARFCN_extended

Same as cell 1

This field specifies the E-UTRA Absolute Radio Frequency Channel Number as defined in 3GPP TS 36.104.

} ** 0

End of Repeated EARFCN_extended

Extended EARFCNs Description for CSG Cells

0

spare padding

spare padding

Condition

Explanation

Band > 64

If band > 64 is selected