0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

-9.5 dBm

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

2.85 MHz ≤ f_offset < f_offset_max

-13 dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -13dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

-13.5 dBm

100 kHz

6 MHz ≤ Δf ≤ Δfmax

6.05 MHz ≤ f_offset < f_offsetmax

-13 dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -13dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf <

min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset <

min(10.05 MHz, f_offset_max)

-12.5 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.05 MHz ≤ f_offset < f_offset_max

-13 dBm (Note 5)

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -13dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

-9.5 dBm

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

3.3 MHz ≤ f_offset < f_offset_max

-13 dBm

1MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -13dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

-9.2 dBm

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

3.3 MHz ≤ f_offset < f_offset_max

-13 dBm

1MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -13dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

-13.5 dBm

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.5 MHz ≤ f_offset < f_offset_max

-13 dBm

1MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -13dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

-13.2 dBm

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.5 MHz ≤ f_offset < f_offset_max

-13 dBm

1MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -13dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf <

min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset <

min(10.05 MHz, f_offset_max)

-12.5 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.5 MHz ≤ f_offset < f_offset_max

-13 dBm (Note 9)

1MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -13dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf <

min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset <

min(10.05 MHz, f_offset_max)

-12.2 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.5 MHz ≤ f_offset < f_offset_max

-13 dBm (Note 9)

1MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -13dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

-9.5 dBm

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

2.85 MHz ≤ f_offset < f_offset_max

-16 dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -16dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

-13.5 dBm

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.05 MHz ≤ f_offset < f_offset_max

-16 dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -16dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf <

min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset <

min(10.05 MHz, f_offset_max)

-12.5 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.05 MHz ≤ f_offset < f_offset_max

-16 dBm (Note 9)

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -16dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

-9.5 dBm

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

3.3 MHz ≤ f_offset < f_offset_max

-15 dBm

1MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -15dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

-9.2 dBm

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

3.3 MHz ≤ f_offset < f_offset_max

-15 dBm

1MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -15dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

-13.5 dBm

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.5 MHz ≤ f_offset < f_offset_max

-15 dBm

1MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -15dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

-13.2 dBm

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.5 MHz ≤ f_offset < f_offset_max

-15 dBm

1MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -15dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf <

min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset <

min(10.05 MHz, f_offset_max)

-12.5 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.5 MHz ≤ f_offset < f_offset_max

-15 dBm (Note 9)

1MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -15dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf <

min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset <

min(10.05 MHz, f_offset_max)

-12.2 dBm

100 kHz

10 MHz ≤ Δf ≤ Δfmax

10.5 MHz ≤ f_offset < f_offsetmax

-15 dBm (Note 9)

1MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -15dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 0.2 MHz

0.015MHz ≤ f_offset < 0.215MHz

-12.5dBm

30 kHz

0.2 MHz ≤ Δf < 1 MHz

0.215MHz ≤ f_offset < 1.015MHz

30 kHz

(Note 8)

1.015MHz ≤ f_offset < 1.5 MHz

-24.5dBm

30 kHz

1 MHz ≤ Δf ≤

min( 10 MHz , Δf_max)

1.5 MHz ≤ f_offset <

min(10.5 MHz, f_offset_max)

-11.5dBm

1 MHz

10 MHz ≤ Δf ≤ Δf_max

10.5 MHz ≤ f_offset < f_offset_max

-15 dBm (Note 9)

1 MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -15dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 0.05 MHz

0.015 MHz ≤ f_offset < 0.065 MHz

30 kHz

0.05 MHz ≤ Δf < 0.15 MHz

0. 065 MHz ≤ f_offset < 0.165 MHz

30 kHz

0.15 MHz ≤ Δf < 0.2 MHz

0.165MHz ≤ f_offset < 0.215MHz

-12.5dBm

30 kHz

0.2 MHz ≤ Δf < 1 MHz

0.215MHz ≤ f_offset < 1.015MHz

30 kHz

(Note 8)

1.015MHz ≤ f_offset < 1.5 MHz

-24.5dBm

30 kHz

1 MHz ≤ Δf ≤

6 MHz

1.5MHz ≤ f_offset < 6.5 MHz,

-11.5dBm

1 MHz

6 MHz ≤ Δf ≤ Δf_max

6.5 MHz ≤ f_offset < f_offset_max

-15 dBm

1 MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -15dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 0.05 MHz

0.015 MHz ≤ f_offset < 0.065 MHz

30 kHz

0.05 MHz ≤ Δf < 0.15 MHz

0. 065 MHz ≤ f_offset < 0.165 MHz

30 kHz

0.15 MHz ≤ Δf < 0.2 MHz

0.165MHz ≤ f_offset < 0.215MHz

-12.5 dBm

30 kHz

0.2 MHz ≤ Δf < 1 MHz

0.215MHz ≤ f_offset < 1.015MHz

30 kHz

(Note 8)

1.015MHz ≤ f_offset < 1.5 MHz

-24.5 dBm

30 kHz

1 MHz ≤ Δf ≤ 2.8 MHz

1.5 MHz ≤ f_offset < 3.3 MHz

-11.5 dBm

1 MHz

2.8 MHz ≤ Δf ≤ Δf_max

3.3 MHz ≤ f_offset < f_offset_max

-15 dBm

1 MHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -15dBm/1MHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

-29.5 dBm

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

2.85 MHz ≤ f_offset < f_offset_max

-31 dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -31 dBm/100 kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

-29.2 dBm

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

2.85 MHz ≤ f_offset < f_offset_max

-31 dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -31 dBm/100 kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

-33.5 dBm

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.05 MHz ≤ f_offset < f_offset_max

-35 dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -35 dBm/100 kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

-33.2 dBm

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.05 MHz ≤ f_offset < f_offset_max

-35 dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -35 dBm/100 kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf <

min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset <

min(10.05 MHz, f_offset_max)

-35.5 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.05 MHz ≤ f_offset < f_offset_max

-37 dBm (Note 9)

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -37 dBm/100 kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf <

min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset <

min(10.05 MHz, f_offset_max)

-35.2 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.05 MHz ≤ f_offset < f_offset_max

-37 dBm (Note 9)

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -37 dBm/100 kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

-34.5 dBm

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

3.3 MHz ≤ f_offset < f_offset_max

1MHz

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

-34.2 dBm

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

3.3 MHz ≤ f_offset < f_offset_max

1MHz

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

-38.5 dBm

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.5 MHz ≤ f_offset < f_offset_max

1MHz

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

-38.2 dBm

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.5 MHz ≤ f_offset < f_offset_max

1MHz

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf < min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset < min(10.05 MHz, f_offset_max)

-40.5 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.5 MHz ≤ f_offset < f_offset_max

(Note 9)

1MHz

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf < min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset < min(10.05 MHz, f_offset_max)

-40.2 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.5 MHz ≤ f_offset < f_offset_max

(Note 9)

1MHz

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

P_rated,c-53.5dB

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

2.85 MHz ≤ f_offset < f_offset_max

-25dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -25dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

P_rated,c-53.2dB

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

2.85 MHz ≤ f_offset < f_offset_max

-25dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -25dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

-22.5 dBm

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

2.85 MHz ≤ f_offset < f_offset_max

-25dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -25dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 1.4 MHz

0.05 MHz ≤ f_offset < 1.45 MHz

100 kHz

1.4 MHz ≤ Δf < 2.8 MHz

1.45 MHz ≤ f_offset < 2.85 MHz

-22.2 dBm

100 kHz

2.8 MHz ≤ Δf ≤ Δf_max

2.85 MHz ≤ f_offset < f_offset_max

-25dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -25dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

P_rated,c-57.5dB

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.05 MHz ≤ f_offset < f_offset_max

Min(P_rated,c-59dB, -25dBm)

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be Min(P_rated,c-59dB, -25dBm)/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

P_rated,c-57.2dB

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.05 MHz ≤ f_offset < f_offset_max

Min(P_rated,c-59dB, -25dBm)

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be Min(P_rated,c-59dB, -25dBm)/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

-26.5 dBm

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.05 MHz ≤ f_offset < f_offset_max

-28 dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -28dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 3 MHz

0.05 MHz ≤ f_offset < 3.05 MHz

100 kHz

3 MHz ≤ Δf < 6 MHz

3.05 MHz ≤ f_offset < 6.05 MHz

-26.2 dBm

100 kHz

6 MHz ≤ Δf ≤ Δf_max

6.05 MHz ≤ f_offset < f_offset_max

-28 dBm

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -28dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf < min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset < min(10.05 MHz, f_offset_max)

P_rated,c-58.5dB

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.05 MHz ≤ f_offset < f_offset_max

Min(P_rated,c60dB, -25dBm) (Note 9)

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be Min(P_rated,c-60dB, -25dBm)/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf < min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset < min(10.05 MHz, f_offset_max)

P_rated,c-58.2dB

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.05 MHz ≤ f_offset < f_offset_max

Min(P_rated,c-60dB, -25dBm) (Note 9)

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be Min(P_rated,c-60dB, -25dBm)/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf < min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset < min(10.05 MHz, f_offset_max)

-27.5 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.05 MHz ≤ f_offset < f_offset_max

-29 dBm (Note 9)

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -29dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 5 MHz

0.05 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf < min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset < min(10.05 MHz, f_offset_max)

-27.2 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.05 MHz ≤ f_offset < f_offset_max

-29 dBm (Note 9)

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band the test requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10MHz from both adjacent sub blocks on each side of the sub-block gap, where the test requirement within sub-block gaps shall be -29dBm/100kHz.

NOTE 2: For BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the test requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap.

0 MHz ≤ Δf < 1 MHz

0.05 MHz ≤ f_offset < 1.05 MHz

100 kHz

1 MHz ≤ Δf < min(10 MHz, Δf_max)

1.05 MHz ≤ f_offset < min(10.05 MHz, f_offset_max)

100 kHz

10 MHz ≤ Δf < min(20 MHz, Δf_max)

10.05 MHz ≤ f_offset < min(20.05 MHz, f_offset_max)

100 kHz

20 MHz ≤ Δf < min(170 MHz, Δf_max)

20.05 MHz ≤ f_offset < min(170.05 MHz, f_offset_max)

Max(P_rated,c – 62.6dB, -40dBm)

100 kHz

170 MHz ≤ Δf < min(206 MHz, Δf_max)

170.05 MHz ≤ f_offset < min(206.05 MHz, f_offset_max)

Max(P_rated,c – 64.6dB, -40dBm)

100 kHz

206 MHz ≤ Δf ≤ Δf_max

206.05 MHz ≤ f_offset < f_offset_max

Max(P_rated,c – 69.6dB, -40dBm)

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band, the minimum requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 20 MHz from both adjacent sub blocks on each side of the sub-block gap, where the minimum requirement within sub-block gaps shall be Max (P_rated,c – 62.6dB, -40 dBm)/100kHz.

0 MHz ≤ Δf < 0.5 MHz

0.05 MHz ≤ f_offset < 0.55 MHz

100 kHz

0.5 MHz ≤ Δf < 5 MHz

0.55 MHz ≤ f_offset < min(5.05 MHz, f_offset_max)

100 kHz

5 MHz ≤ Δf < min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset < min(10.05 MHz, f_offset_max)

100 kHz

10 MHz ≤ Δf < min(85 MHz, Δf_max)

10.05 MHz ≤ f_offset < min(85.05 MHz, f_offset_max)

Max(P_rated,c – 57.3dB, -40dBm)

100 kHz

85 MHz ≤ Δf < min(103 MHz, Δf_max)

85.05 MHz ≤ f_offset < min(103.05 MHz, f_offset_max)

Max(P_rated,c – 59.3dB, -40dBm)

100 kHz

103 MHz ≤ Δf ≤ Δf_max

103.05 MHz ≤ f_offset < f_offset_max

Max(P_rated,c – 64.3dB, -40dBm)

100 kHz

NOTE 1: For a BS supporting non-contiguous spectrum operation within any operating band, the minimum requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap. Exception is f ≥ 10 MHz from both adjacent sub blocks on each side of the sub-block gap, where the minimum requirement within sub-block gaps shall be Max (P_rated,c – 57.3dB, -40 dBm)/100kHz.

0 MHz ≤ Δf < 0.05 MHz

0.015 MHz ≤ f_offset < 0.065 MHz

30 kHz

0.05 MHz ≤ Δf < 0.15 MHz

0.065 MHz ≤ f_offset < 0.165 MHz

30 kHz

0.15 MHz ≤ Δf < 0.2 MHz

0.165 MHz ≤ f_offset < 0.215 MHz

-12.5 dBm

30 kHz

0.2 MHz ≤ Δf < 1 MHz

0.215 MHz ≤ f_offset < 1.015 MHz

30 kHz

(Note 8)

1.015 MHz ≤ f_offset < 1.5 MHz

-24.5 dBm

30 kHz

1 MHz ≤ Δf ≤

min(Δf_max, 10 MHz)

1.5 MHz ≤ f_offset < min(f_offset_max, 10.5 MHz)

-11.5 dBm

1 MHz

10 MHz ≤ Δf ≤ Δf_max

10.5 MHz ≤ f_offset < f_offset_max

-15 dBm (Note 9)

1 MHz

NOTE 1: The limits in this table only apply for operation with a standalone NB-IoT carrier adjacent to the Base Station RF Bandwidth edge.

NOTE 2: For a BS supporting non-contiguous spectrum operation within any operating band the minimum requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block.

NOTE 3: For a BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the minimum requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

NOTE 4: In case the carrier adjacent to the RF bandwidth edge is a standalone NB-IoT carrier, the value of X = PNB-IoTcarrier – 43, where PNB-IoTcarrier is the power level of the standalone NB-IoT carrier adjacent to the RF bandwidth edge. In other cases, X = 0.

NOTE 5: For BS that only support E-UTRA and NB-IoT multi-carrier operation, the requirements in this table do not apply to an E-UTRA BS from Release 8, which is upgraded to support E-UTRA and NB-IoT multi-carrier operation, where the upgrade does not affect existing RF parts of the radio unit related to the requirements in this table. In this case, the requirements in subclauses 6.6.3.5.1 and 6.6.3.5.2 shall apply.

0 MHz ≤ Δf < 0.05 MHz

0.015 MHz ≤ f_offset < 0.065 MHz

30 kHz

0.05 MHz ≤ Δf < 0.16 MHz

0.065 MHz ≤ f_offset < 0.175 MHz

30 kHz

0.16 MHz ≤ Δf < 5 MHz

(Note 8)

0.175 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf < min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset < min(10.05 MHz, f_offset_max)

-35.5 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.05 MHz ≤ f_offset < f_offset_max

-37 dBm (Note 9)

100 kHz

NOTE 1: The limits in this table only apply for operation with a standalone NB-IoT carrier adjacent to the Base Station RF Bandwidth edge.

NOTE 2: For a BS supporting non-contiguous spectrum operation within any operating band the minimum requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block.

NOTE 3: For a BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the minimum requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

NOTE 4: In case the carrier adjacent to the RF bandwidth edge is a standalone NB-IoT carrier, the value of X = PNB-IoTcarrier – 24, where PNB-IoTcarrier is the power level of the standalone NB-IoT carrier adjacent to the RF bandwidth edge. In other cases, X = 0.

0 MHz ≤ Δf < 0.05 MHz

0.015 MHz ≤ f_offset < 0.065 MHz

30 kHz

0.05 MHz ≤ Δf < 0.16 MHz

0.065 MHz ≤ f_offset < 0.175 MHz

30 kHz

0.16 MHz ≤ Δf < 5 MHz

(Note 8)

0.175 MHz ≤ f_offset < 5.05 MHz

100 kHz

5 MHz ≤ Δf < min(10 MHz, Δf_max)

5.05 MHz ≤ f_offset < min(10.05 MHz, f_offset_max)

-39.5 dBm

100 kHz

10 MHz ≤ Δf ≤ Δf_max

10.05 MHz ≤ f_offset < f_offset_max

-41 dBm (Note 9)

100 kHz

NOTE 1: The limits in this table only apply for operation with a standalone NB-IoT carrier adjacent to the Base Station RF Bandwidth edge.

NOTE 2: In case the carrier adjacent to the RF bandwidth edge is a standalone NB-IoT carrier, the value of X = PNB-IoTcarrier – 20, where PNB-IoTcarrier is the power level of the standalone NB-IoT carrier adjacent to the RF bandwidth edge. In other cases, X = 0.

0 MHz ≤ Δf < 0.05 MHz

0.015 MHz ≤ f_offset < 0.065 MHz

30 kHz

0.05 MHz ≤ Δf < 0.15 MHz

0.065 MHz ≤ f_offset < 0.165 MHz

30 kHz

0.15 MHz ≤ Δf < 0.6 MHz (Note 1)

0.165MHz ≤ f_offset < 0.615MHz

30 kHz

0.6 MHz ≤ Δf < 1 MHz

0.615MHz ≤ f_offset < 1.015MHz

30 kHz

(Note 8)

1.015MHz ≤ f_offset < 1.5 MHz

P_rated,c – 63.5 dB

30 kHz

1 MHz ≤ Δf ≤ 2.8 MHz

1.5 MHz ≤ f_offset < 3.3 MHz

P_rated,c – 50.5 dB

1 MHz

2.8 MHz ≤ Δf ≤ 5 MHz

3.3 MHz ≤ f_offset < 5.5 MHz

min(P_rated,c – 50.5 dB, -13.5dBm)

1 MHz

5 MHz ≤ Δf < min(10 MHz, Δf_max)

5.5 MHz ≤ f_offset < min(10.5 MHz, f_offset_max)

P_rated,c – 54.5 dB

1 MHz

10 MHz ≤ Δf ≤ Δf_max

10.5 MHz ≤ f_offset < f_offset_max

P_rated,c -56dB (Note 9)

1 MHz

NOTE 1: The limits in this table only apply for operation with a standalone NB-IoT carrier adjacent to the Base Station RF Bandwidth edge.

NOTE 2: For a BS supporting non-contiguous spectrum operation within any operating band the minimum requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block.

NOTE 3: For a BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the minimum requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

0 MHz ≤ Δf < 0.05 MHz

0.015 MHz ≤ f_offset < 0.065 MHz

30 kHz

0.05 MHz ≤ Δf < 0.15 MHz

0.065 MHz ≤ f_offset < 0.165 MHz

30 kHz

0.15 MHz ≤ Δf < 0.6 MHz (Note 1)

0.165MHz ≤ f_offset < 0.615MHz

30 kHz

0.6 MHz ≤ Δf < 1 MHz

0.615MHz ≤ f_offset < 1.015MHz

30 kHz

(Note 8)

1.015MHz ≤ f_offset < 1.5 MHz

-32.5 dBm

30 kHz

1 MHz ≤ Δf ≤ 5 MHz

1.5 MHz ≤ f_offset < 5.5 MHz

-19.5 dBm

1 MHz

5 MHz ≤ Δf < min(10 MHz, Δf_max)

5.5 MHz ≤ f_offset < min(10.5 MHz, f_offset_max)

-23.5 dBm

1 MHz

10 MHz ≤ Δf ≤ Δf_max

10.5 MHz ≤ f_offset < f_offset_max

-25 dBm (Note 9)

1 MHz

NOTE 1: The limits in this table only apply for operation with a standalone NB-IoT carrier adjacent to the Base Station RF Bandwidth edge.

NOTE 2: For a BS supporting non-contiguous spectrum operation within any operating band the minimum requirement within sub-block gaps is calculated as a cumulative sum of contributions from adjacent sub blocks on each side of the sub block gap, where the contribution from the far-end sub-block shall be scaled according to the measurement bandwidth of the near-end sub-block.

NOTE 3: For a BS supporting multi-band operation with Inter RF Bandwidth gap < 20MHz the minimum requirement within the Inter RF Bandwidth gaps is calculated as a cumulative sum of contributions from adjacent sub-blocks or RF Bandwidth on each side of the Inter RF Bandwidth gap, where the contribution from the far-end sub-block or RF Bandwidth shall be scaled according to the measurement bandwidth of the near-end sub-block or RF Bandwidth.

NOTE 4: In case the carrier adjacent to the RF bandwidth edge is a standalone NB-IoT carrier, the value of X = PNB-IoTcarrier – 31, where PNB-IoTcarrier is the power level of the standalone NB-IoT carrier adjacent to the RF bandwidth edge. In other cases, X = 0.

200 kHz

0 MHz ≤ Δf < 1 MHz

0.005 MHz ≤ f_offset < 0.995 MHz

-6 dBm

10 kHz

1.4 MHz

0 MHz ≤ Δf < 1 MHz

0.005 MHz ≤ f_offset < 0.995 MHz

-14 dBm

10 kHz

3 MHz

0 MHz ≤ Δf < 1 MHz

0.015 MHz ≤ f_offset < 0.985 MHz

-13 dBm

30 kHz

5 MHz

0 MHz ≤ Δf < 1 MHz

0.015 MHz ≤ f_offset < 0.985 MHz

-15 dBm

30 kHz

10 MHz

0 MHz ≤ Δf < 1 MHz

0.05 MHz ≤ f_offset < 0.95 MHz

-13 dBm

100 kHz

15 MHz

0 MHz ≤ Δf < 1 MHz

0.05 MHz ≤ f_offset < 0.95 MHz

-13 dBm

100 kHz

20 MHz

0 MHz ≤ Δf < 1 MHz

0.05 MHz ≤ f_offset < 0.95 MHz

-13 dBm

100 kHz

All

1 MHz ≤ Δf < Δf_max

1.05 MHz ≤ f_offset < f_offset_max

-13 dBm

100 kHz

200 kHz

0 MHz ≤ Δf < 1 MHz

0.005 MHz ≤ f_offset < 0.995 MHz

-6 dBm

10 kHz

1.4 MHz

0 MHz ≤ Δf < 1 MHz

0.005 MHz ≤ f_offset < 0.995 MHz

-14 dBm

10 kHz

3 MHz

0 MHz ≤ Δf < 1 MHz

0.015 MHz ≤ f_offset < 0.985 MHz

-13 dBm

30 kHz

5 MHz

0 MHz ≤ Δf < 1 MHz

0.015 MHz ≤ f_offset < 0.985 MHz

-15 dBm

30 kHz

10 MHz

0 MHz ≤ Δf < 1 MHz

0.05 MHz ≤ f_offset < 0.95 MHz

-13 dBm

100 kHz

15 MHz

0 MHz ≤ Δf < 1 MHz

0.05 MHz ≤ f_offset < 0.95 MHz

-15 dBm

100 kHz

20 MHz

0 MHz ≤ Δf < 1 MHz

0.05 MHz ≤ f_offset < 0.95 MHz

-16 dBm

100 kHz

All

1 MHz ≤ Δf < Δf_max

1.5 MHz ≤ f_offset < f_offset_max

-13 dBm

1 MHz

All

0 MHz ≤ Δf < 100 kHz

0.015 MHz ≤ f_offset < 0.085 MHz

-13 dBm

30 kHz

All

100 kHz ≤ Δf < Δf_max

150 kHz ≤ f_offset < f_offset_max

-13 dBm

100 kHz

F_filter = 8*N + 306 (MHz);
21 ≤ N ≤ 60

8 MHz

P_EM,N

24

1541 – 1559 MHz

P_EM,B24,a

P_EM,B24,f

1559 – 1610 MHz

P_EM,B24,b

P_EM,B24,d

1610 – 1650 MHz

P_EM,B24,c

P_EM,B24,e

2.5 MHz

P_{EM,B32,a, B75, B76}

5 MHz

7.5 MHz

P_{EM,B32,b, B75, B76}

5 MHz

12.5 MHz ≤ f_offset ≤ f_offset_max,B32

P_{EM,B32,c, B75, B76}

5 MHz

NOTE: For Band 32, when non-MFCN services are deployed in the adjacent bands, f_offset_max  denotes the frequency difference between the lower channel edge and 1454.5 MHz, and the frequency difference between the upper channel edge and 1489.5 MHz for the set channel position. For Band 32, when MFCN services are deployed in the adjacent frequencies, Band 75 and Band 76, f_offset_max denotes the frequency difference between the lower channel edge and 1429.5 MHz, and the frequency difference between the upper channel edge and 1514.5 MHz for the set channel position.

1429.5 MHz ≤ F_filter ≤ 1448.5 MHz

P_EM,B32,d

1 MHz

F_filter = 1450.5 MHz

P_EM,B32,e

3 MHz

F_filter = 1493.5 MHz

P_EM,B32,e

3 MHz

1495.5 MHz ≤ F_filter ≤ 1517.5 MHz

P_EM,B32,d

1 MHz

1518.5 MHz ≤ F_filter ≤ 1519.5 MHz

P_{EM,B50,B74,B75,a}

1 MHz

1520.5 MHz ≤ F_filter ≤ 1558.5 MHz

P_{EM,B50,B74,B75,b}

1 MHz

F_filter = 1413.5 MHz

-42

27 MHz

45

F_filter = 1467.5

-20

1 MHz

F_filter = 1468.5

-23

1 MHz

F_filter = 1469.5

-26

1 MHz

F_filter = 1470.5

-33

1 MHz

F_filter = 1471.5

-40

1 MHz

1472.5 MHz ≤ F_filter ≤ 1491.5 MHz

-47

1 MHz

All

0 MHz ≤ Δf < 10 MHz

0.5 MHz ≤ f_offset < 9.5 MHz

-13 dBm

1 MHz

1.4, 3, 5

2400 – 2477.5

6 MHz ≤ Δf < 83.5 MHz

6.5 MHz ≤ f_offset < 83 MHz

-25 dBm

1 MHz

10

2400 – 2473.5

10 MHz ≤ Δf < 83.5 MHz

10.5 MHz ≤ f_offset < 83 MHz

-25 dBm

1 MHz

1.4, 3, 5

2477.5 – 2478.5

5 MHz ≤ Δf < 6 MHz

5.5 MHz

-13 dBm

1 MHz

10

2473.5 – 2478.5

5 MHz ≤ Δf < 10 MHz

5.5 MHz ≤ f_offset < 9.5 MHz

-13 dBm

1 MHz

All

2478.5 – 2483.5

0 MHz ≤ Δf < 5 MHz

0.5 MHz ≤ f_offset < 4.5 MHz

-10 dBm

1 MHz

1.4, 3, 5

2495 – 2501

0 MHz ≤ Δf < 6 MHz

0.5 MHz ≤ f_offset < 5.5 MHz

-13 dBm

1 MHz

10

2495 – 2505

0 MHz ≤ Δf < 10 MHz

0.5 MHz ≤ f_offset < 9.5 MHz

-13 dBm

1 MHz

1.4, 3, 5

2501 – 2690

6 MHz ≤ Δf < 195 MHz

6.5 MHz ≤ f_offset < 194.5 MHz

-25 dBm

1 MHz

10

2505 – 2690

10 MHz ≤ Δf < 195 MHz

10.5 MHz ≤ f_offset < 194.5 MHz

-25 dBm

1 MHz