Foreword1 Scope2 References3 Definitions, symbols and abbreviations4 General test conditions and declarations5 Operating bands and channel arrangement5.1 General5.2 Void5.3 Void5.4 Void5.5 Operating bands5.6 Channel bandwidth5.6 Channel bandwidth5.7 Channel arrangement5.8 Requirements for contiguous and non-contiguous spectrum6 Transmitter characteristics6.1 General6.1 General6.1.1 E-UTRA Test Models6.1.2 Data content of Physical channels and Signals for E-TM6.1.3 NB-IoT Test Model6.1.4 Data content of Physical channels and Signals for N-TM6.1.5 Test Model for NB-IoT guard band operation6.1.6 Test Model for NB-IoT in-band operation6.2 Base station output power6.3 Output power dynamics6.3.2 Total power dynamic range6.4 Transmit ON/OFF power6.5 Transmitted signal quality6.6 Unwanted emissions6.6 Unwanted emissions6.6.1 Occupied bandwidth6.6.2 Adjacent Channel Leakage power Ratio (ACLR)6.6.3 Operating band unwanted emissions6.6.4 Transmitter spurious emissions6.7 Transmitter intermodulation7 Receiver characteristics7.1 General7.2 Reference sensitivity level7.3 Dynamic range7.4 In-channel selectivity7.5 Adjacent Channel Selectivity (ACS) and narrow-band blocking7.6 Blocking7.7 Receiver spurious emissions7.8 Receiver intermodulation8 Performance requirement8.1 General8.2 Performance requirements for PUSCH8.3 Performance requirements for PUCCH8.4 Performance requirements for PRACH8.5 Performance requirements for Narrowband IoT8.6 Performance requirements for subslot-PUSCH8.7 Performance requirements for SPUCCH9 (Void)A.0 GeneralA.1 Fixed Reference Channels for reference sensitivity and in‑-channel selectivity (QPSK, R=1/3)A.2 Fixed Reference Channels for dynamic range (16QAM, R=2/3)A.3 Fixed Reference Channels for performance requirements (QPSK 1/3)A.4 Fixed Reference Channels for performance requirements (16QAM 3/4)A.5 Fixed Reference Channels for performance requirements (64QAM 5/6)A.6 PRACH Test preamblesA.7 Fixed Reference Channels for UL timing adjustment (Scenario 1)A.8 Fixed Reference Channels for UL timing adjustment (Scenario 2)A.9 Multi user PUCCH testA.10 PUCCH transmission on two antenna ports testA.11 Fixed Reference Channel for PUSCH with TTI bundling and enhanced HARQ patternA.14 Fixed Reference Channels for NB-IOT reference sensitivity (π/2 BPSK, R=1/3)A.15 Fixed Reference Channels for NB-IoT dynamic range (π/4 QPSK, R=2/3)A.16 Fixed Reference Channels for NB-IoT NPUSCH format 1A.17 Fixed Reference Channels for performance requirements (256QAM 5/6)A.18 Fixed Reference Channels for PUSCH transmission in UpPTS (16QAM 0.65)A.19 Fixed Reference Channels for PUSCH transmission in UpPTS (256QAM 0.69)A.20 Fixed Reference Channels for PUSCH with Frame structure type 3A.21 Fixed Reference Channels for performance requirements (QPSK 3/5)A.22 Fixed Reference Channels for performance requirements (64QAM 1/2)A.23 Fixed Reference Channel for subslot-PUSCHA.24 Fixed Reference Channels for PUSCH with SubPRB transmissionB.1 Static propagation conditionB.2 Multi-path fading propagation conditionsB.3 High speed train conditionB.4 Moving propagation conditionsB.5 Multi-Antenna channel modelsB.5A Multi-Antenna channel models using cross polarized antennasB.6 Interference model for enhanced performance requirements type A and type BD.1 GeneralD.2 Normal test environmentD.3 Extreme test environmentD.4 VibrationD.5 Power supplyD.6 Measurement of test environmentsF.1 GeneralG.1 Measurement of transmitterG.2 Measurement of receiverG.3 Measurement of Performance RequirementsI.1 TransmitterI.2 ReceiverI.3 Performance requirementI.4 Channel access proceduresJ.1 GeneralJ.2 Multi-carrier BS of different E-UTRA channel bandwidthsJ.3 Multi-carrier BS of E-UTRA and UTRA 5.2 Void 36.1413GPPBase Station (BS) conformance testingEvolved Universal Terrestrial Radio Access (E-UTRA)Release 17TS Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM