B.3. Conditions for Measurement Performance for UE
25.1333GPPRelease 17Requirements for support of radio resource management (FDD)TS
B.3.1. Conditions for intra frequency CPICH RSCP measurements accuracy
This section defines the intra frequency CPICH RSCP applicable for a corresponding operating band.
The CPICH RSCP conditions for measurements accuracy of intra-frequency CPICH RSCP are defined in Table B.3.1-1
Table B.3.1-1: Conditions for measurements of intra-frequency CPICH RSCP
Parameter |
Conditions |
||||
Bands |
Bands |
Bands |
Bands |
Bands |
|
I, IV, VI, X, XI, XIX, XXI, XXXII |
IX |
II, V, VII |
III, VIII, XII, XIII, XIV, XX, XXII |
XXV, XXVI |
|
CPICH RSCP1|dBm ≥ |
-114 dBm |
-113 dBm |
-112 dBm |
-111 dBm |
-110.5dBm (Note 1) |
Note 1: The condition is -112 dBm when the carrier frequency of the assigned UTRA channel is within 869-894 MHz for the UE which supports both Band V and Band XXVI operating frequencies. |
B.3.2. Conditions for intra frequency CPICH RSCP relative measurements accuracy
This section defines the intra frequency CPICH RSCP applicable for a corresponding operating band.
The CPICH RSCP conditions for relative measurements accuracy of intra-frequency CPICH RSCP are defined in Table B.3.2-1
Table B.3.2-1: Conditions for relative measurements of intra-frequency CPICH RSCP
Parameter |
Conditions |
||||
Bands |
Bands |
Bands |
Bands |
Bands |
|
I, IV, VI, X, XI, XIX, XXI, XXXII |
IX |
II, V, VII |
III, VIII, XII, XIII, XIV, XX, XXII |
XXV, XXVI |
|
CPICH RSCP1,2|dBm ≥ |
-114 dBm |
-113 dBm |
-112 dBm |
-111 dBm |
-110.5dBm (Note 1) |
Note 1: The condition is -112 dBm when the carrier frequency of the assigned UTRA channel is within 869-894 MHz for the UE which supports both Band V and Band XXVI operating frequencies. |
B.3.3. Conditions for inter frequency CPICH RSCP relative measurements accuracy
This section defines the inter frequency CPICH RSCP applicable for a corresponding operating band.
The CPICH RSCP conditions for relative measurements accuracy of inter-frequency CPICH RSCP are defined in Table B.3.2-1.
B.3.4. Conditions for intra frequency CPICH Ec/Io measurements accuracy
This section defines the intra frequency CPICH RSCP applicable for a corresponding operating band.
The CPICH RSCP conditions for measurements accuracy of intra-frequency CPICH Ec/Io are defined in Table B.3.1-1.
B.3.5. Conditions for intra frequency CPICH Ec/Io relative measurements accuracy
This section defines the intra frequency CPICH RSCP applicable for a corresponding operating band.
The CPICH RSCP conditions for measurements accuracy of intra-frequency CPICH Ec/Io are defined in Table B.3.2-1.
B.3.6. Conditions for inter frequency CPICH Ec/Io measurements accuracy
This section defines the inter frequency CPICH RSCP applicable for a corresponding operating band.
The CPICH RSCP conditions for measurements accuracy of inter-frequency CPICH Ec/Io are defined in Table B.3.1-1.
B.3.7. Conditions for inter frequency CPICH Ec/Io relative measurements accuracy
This section defines the inter frequency CPICH RSCP applicable for a corresponding operating band.
The CPICH RSCP conditions for measurements accuracy of inter-frequency CPICH Ec/Io are defined in Table B.3.2-1.
B.3.8. Conditions for intra frequency SFN-SFN observed time difference
This section defines the intra frequency CPICH RSCP applicable for a corresponding operating band.
The CPICH RSCP conditions for intra-frequency SFN-SFN observed time difference are defined in Table B.3.2-1.
B.3.9. Conditions for inter frequency SFN-SFN observed time difference
This section defines the inter frequency CPICH RSCP applicable for a corresponding operating band.
The CPICH RSCP conditions for inter-frequency SFN-SFN observed time difference are defined in Table B.3.2-1.
B.3.10. Conditions for SFN-SFN observed time difference type 1
This section defines the CPICH RSCP applicable for a corresponding operating band.
The CPICH RSCP conditions for SFN-SFN observed time difference type 1 are defined in Table B.3.2-1.
B.3.11. Conditions for intra frequency SFN-SFN observed time difference type 2 without or with IPDL period active
This section defines the intra frequency CPICH RSCP applicable for a corresponding operating band.
The CPICH RSCP conditions for intra-frequency SFN-SFN observed time difference type 2 without or with IPDL period active are defined in Table B.3.2-1.
B.3.12. Conditions for inter frequency SFN-SFN observed time difference type 2
This section defines the inter frequency CPICH RSCP applicable for a corresponding operating band.
The CPICH RSCP conditions for inter-frequency SFN-SFN observed time difference type 2 without or with IPDL period active are defined in Table B.3.2-1.