B.1. Conditions for Idle mode tasks
25.1333GPPRelease 17Requirements for support of radio resource management (FDD)TS
B.1.1. Conditions for measurements of inter-RAT E-UTRA cells
This section defines the inter-RAT E-UTRA RSRP, RSRP Ês/Iot, SCH_RP and SCH Ês/Iot applicable for a corresponding operating band.
The conditions for measurements of inter-RAT E-UTRA cells are defined in Table B.1.1-1
Table B.1.1-1: Conditions for measurements of inter-RAT E-UTRA cells
Conditions |
||||
Band groups Conditions |
Parameters |
|||
RSRP|dBm ≥ |
SCH_RP|dBm≥ |
RSRP Ês/Iot≥ |
SCH Ês/Iot ≥ |
|
FDD_A, TDD_A |
-124 dBm |
-124 dBm |
-4 dB |
-4dB |
FDD_B1, FDD_B2 |
-123.5 dBm |
-123.5 dBm |
||
FDD_C, TDD_C |
-123 dBm |
-123 dBm |
||
FDD_E, TDD_E |
-122 dBm |
-122 dBm |
||
FDD_G |
-121 dBm |
-121 dBm |
||
FDD_H |
-120.5 dBm |
-120.5 dBm |
||
FDD_F |
-121.5 dBm |
-121.5 dBm |
||
FDD_D |
-122.5 dBm |
-122.5 dBm |
||
Note 1: The condition is -122 dBm when the carrier frequency of the assigned E-UTRA channel bandwidth is within 865-894 MHz. Note 2: For Band 74, the condition is -124 dBm when the carrier frequency of the assigned E-UTRA channel bandwidth is within 1475.9-1510.9 MHz. |