B.2. Conditions for UE Measurements Procedures
25.1333GPPRelease 17Requirements for support of radio resource management (FDD)TS
B.2.1. Conditions for E-UTRAN measurements
This section defines the E-UTRAN RSRP, RSRP Ês/Iot, SCH_RP and SCH RP/Iot applicable for a corresponding operating band.
The conditions for E-UTRAN measurements are defined in Table B.2.1-1.
Table B.2.1-1: Conditions for E-UTRAN measurements
Conditions |
||||
Band groups Conditions |
Parameters |
|||
RSRP|dBm ≥ |
SCH_RP|dBm≥ |
RSRP Ês/Iot≥ |
SCH Ês/Iot ≥ |
|
FDD_A, TDD_A |
-125 dBm |
-125 dBm |
-4 dB |
-4dB |
FDD_B1, FDD_B2 |
-124.5 dBm |
-124.5 dBm |
||
FDD_C, TDD_C |
-124 dBm |
-124 dBm |
||
FDD_E, TDD_E |
-123 dBm |
-123 dBm |
||
FDD_G |
-122 dBm |
-122 dBm |
||
FDD_H |
-121.5 dBm |
-121.5 dBm |
||
FDD_F |
-122.5 dBm |
-122.5 dBm |
||
FDD_D |
-123.5 dBm |
-123.5 dBm |
||
Note 1: The condition is -123 dBm when the carrier frequency of the assigned E-UTRA channel bandwidth is within 865-894 MHz. Note 2: For Band 74, the condition is -125 dBm when the carrier frequency of the assigned E-UTRA channel bandwidth is within 1475.9-1510.9 MHz. |