A.3 RRM test configurations

25.1333GPPRelease 17Requirements for support of radio resource management (FDD)TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

A.3.1 UE with single antenna connector

For testing a UE with a single UTRA antenna connector, the test configuration is fully described in sections A.4 to A.9

A.3.2 UE with multiple antenna connectors

For testing a UE with multiple UTRA receive diversity antenna connectors, test signals from each cell in section A.4 to A.9 shall be generated with independent fading (fading applicable to test cases A.8.1.4, A.8.1.5, A.8.1.6, A.8.2.2 and A.8.2.3 only) and applied to each antenna port. For each carrier frequency specified in the testcase, independent noise shall be generated and applied to each antenna port.

The received power spectral density at each antenna connector n, denoted as Îor,_n shall be the same as to the received power spectal density Îor specified for testing a UE with a single antenna connector. The noise spectral density at each antenna connector n, denoted as Ioc,_n shall be the same as the noise spectral density Ioc specified for testing a UE with a single antenna connector.