9.2 Description of CAMEL Subscriber Data

23.0783GPPCustomised Applications for Mobile network Enhanced Logic (CAMEL) Phase 4Release 17Stage 2TS

9.2.1 Mobility Management CAMEL Subscription Information (M‑CSI)

This subclause specifies the contents of the Mobility Management CAMEL Subscription Information (M‑CSI).

9.2.1.1 Mobility Management Triggers

This data indicates which Mobility Management events shall result in a notification to the gsmSCF. One or more events may be marked per subscriber. These events are:

– Location update in the same VLR service area.

– Location update to another VLR service area.

– IMSI attach.

– MS initiated IMSI detach (explicit detach).

– Network initiated IMSI detach (implicit detach).

9.2.1.2 gsmSCF address

This is the address of the gsmSCF where the Mobility Management event notification shall be sent to. The gsmSCF address is in E.164 format.

9.2.1.3 Service Key

The Service Key is included in the notification information flow to the gsmSCF. It indicates to the gsmSCF which Service Logic shall be applied.

9.2.1.4 CSI state

The CSI state indicates whether the M‑CSI is active or not.

9.2.1.5 Notification flag

The notification flag indicates whether the change of the M‑CSI shall trigger Notification on Change of Subscriber Data or not.

9.2.2 Mobility Management for GPRS CAMEL Subscription Information (MG‑CSI)

This subclause specifies the contents of the Mobility Management for GPRS CAMEL Subscription Information (MG‑CSI).

9.2.2.1 Mobility Management Triggers

This data indicates which Mobility Management events shall result in a notification to the gsmSCF. One or more events may be marked per subscriber. These events are:

– Routeing area update of MS to a different SGSN service area (update from mew SGSN);

– Routeing area update of MS to a different SGSN service area (disconnect by detach);

– Routeing area update of MS within the same SGSN service area;

– GPRS attach (e.g. MS switched on, successful routeing area update after network initiated transfer to "MS not reachable for paging");

– MS-initiated GPRS detach (e.g. MS switched off);

– Network-initiated GPRS detach.

– Network-initiated transfer to the "not reachable for paging" state (the network has not received a periodic routeing area update from the MS and assumes that the MS is unreachable).

9.2.2.2 gsmSCF address

This is the address of the gsmSCF where the Mobility Management event notification shall be sent to. The gsmSCF address is in E.164 format.

9.2.2.3 Service Key

The Service Key is included in the notification information flow to the gsmSCF. It indicates to the gsmSCF which Service Logic shall be applied.

9.2.2.4 CSI state

The CSI state indicates whether the MG‑CSI is active or not.

9.2.2.5 Notification flag

The notification flag indicates whether the change of the MG‑CSI shall trigger Notification on Change of Subscriber Data or not.

9.2.3 gsmSCF address list for CSI

The gsmSCF address list indicates the gsmSCF addresses to which Notification on Change of Subscriber Data shall be sent. This list is common to all CSI.