25.5.7 Authentication Failure Reporting
29.0023GPPMobile Application Part (MAP) specificationRelease 17TS
25.5.7.1 General
The Authentication Failure Report procedure is used to notify an HLR about the occurrence of an authentication failure in the SGSN or VLR.
The message flows for this procedure are shown in figures 25.5/7& 25.5/8.
Figure 25.5/7: Message Flow for Authentication Failure Report – VLR to HLR
Figure 25.5/8: Message Flow for Authentication Failure Report – SGSN to HLR
25.5.7.2 Process in the VLR
25.5.7.3 Process in the SGSN
25.5.7.4 Process in the HLR
Figure 25.5/1: Macro Authenticate_MSC
Figure 25.5/2 (sheet 1 of 2): Macro Authenticate_VLR
Figure 25.5/2 (sheet 2 of 2): Macro Authenticate_VLR
Figure 25.5/3 (sheet 1 of 3): Macro Obtain_Authent_Params_VLR
Figure 25.5/3 (sheet 2 of 3): Macro Obtain_Authent_Params_VLR
Figure 25.5/3 (sheet 3 of 3): Macro Obtain_Authent_Params_VLR
Figure 25.5/4: Process Obtain_Authent_Sets_VLR
Figure 25.5/5 (sheet 1 of 2): Process Obtain_Authent_Sets_SGSN
Figure 25.5/5 (sheet 2 of 2): Process Obtain_Authent_Sets_SGSN
Figure 25.5/6 (sheet 1 of 2): Process Obtain_Authent_Sets_HLR
Figure 25.5/6 (sheet 2 of 2): Process Obtain_Authent_Sets_HLR
Figure 25.5/7: Procedure Check_Available_Vectors
Figure 25.5/9: Process Report_Authentication_Failure_VLR
Figure 25.5/10: Process Report_Authentication_Failure_SGSN
Figure 25.5/11: Process Note_Authentication_Failure_HLR