C.2 Setup

38.521-23GPPNRPart 2: Range 2 StandaloneRadio transmission and receptionRelease 17TSUser Equipment (UE) conformance specification

Table C.2-1 describes the downlink Physical Channels that are required for connection set up.

Table C.2-1: Downlink Physical Channels required for connection set-up

Physical Channel

PBCH

SSS

PSS

PDCCH

PDSCH

PBCH DMRS

PDCCH DMRS

PDSCH DMRS

CSI-RS

PTRS

As common PDSCH and PDCCH configuration parameters the parameters in Table A.3.1-1, C.2-2, C.2-3, and C.2-4 shall be used to bring up the connection setup for FR1 NR cell.

Table C.2-2: PDSCH and PDCCH configuration

Parameter

Unit

Value

Number of HARQ processes

8 (TDD)

Aggregation level

CCE

4

Table C.2-3: Additional test parameters for TDD for SCS 60 KHz

Parameter

Unit

UL-DL pattern

TDD Slot Configuration pattern (Note 1)

DDSU

Special Slot Configuration (Note 2)

11D+3G+0U

UL-DL configuration (tdd-UL-DL-ConfigurationCommon)

referenceSubcarrierSpacing

kHz

60

dl-UL-TransmissionPeriodicity

ms

1

nrofDownlinkSlots

2

nrofDownlinkSymbols

11

nrofUplinkSlot

1

nrofUplinkSymbols

0

K1 value
(PDSCH-to-HARQ-timing-indicator)

K1 = 3 if mod(i,4) = 0
K1 = 2 if mod(i,4) = 1
K1 = 5 if mod(i,4) = 2

Note 1: D denotes a slot with all DL symbols; S denotes a slot with a mix of DL, UL and guard symbols; U denotes a slot with all UL symbols. The field is for information.

Note 2: D, G, U denote DL, guard and UL symbols, respectively. The field is for information.

Note 3: i is the slot index per frame; i = {0,…,39}

Table C.2-4: Additional test parameters for TDD for SCS 120 KHz

Parameter

Unit

UL-DL pattern

TDD Slot Configuration pattern (Note 1)

DDDSU

Special Slot Configuration (Note 2)

10D+2G+2U

UL-DL configuration (tdd-UL-DL-ConfigurationCommon)

referenceSubcarrierSpacing

kHz

120

dl-UL-TransmissionPeriodicity

ms

0.625

nrofDownlinkSlots

3

nrofDownlinkSymbols

10

nrofUplinkSlot

1

nrofUplinkSymbols

2

K1 value
(PDSCH-to-HARQ-timing-indicator)

K1 = [4] if mod(i,5) = 0
K1 = [3] if mod(i,5) = 1
K1 = [2] if mod(i,5) = 2
K1 = [6] if mod(i,5) = 3

Note 1: D denotes a slot with all DL symbols; S denotes a slot with a mix of DL, UL and guard symbols; U denotes a slot with all UL symbols. The field is for information.

Note 2: D, G, U denote DL, guard and UL symbols, respectively. The field is for information.

Note 3: i is the slot index per frame; i = {0,…,79}