P.1 Indication of modified MPR behaviour
38.521-23GPPNRPart 2: Range 2 StandaloneRadio transmission and receptionRelease 17TSUser Equipment (UE) conformance specification
This annex contains the definitions of the bits in the field modifiedMPR-Behavior indicated per supported NR band in the IE RF-Parameters [19] by a UE supporting an MPR or A-MPR modified in a given version of this specification. A modified MPR or A-MPR behaviour can apply to a supported NR band in stand-alone operation (including CA and NN-DC operation) or in non-standalone operation with the said NR band as part of an EN-DC or NE-DC band combination. Moreover, the bits in the field can explicitly indicate NS value(s) supported by a UE.
NOTE 1: In the present release, the modifiedMPR-Behavior is indicated [19] by an 8-bit bitmap per supported NR band.
Table P.1-1: Definitions of the bits in the field modifiedMPRbehavior
|
NR Band |
Index of field (bit number) |
Definition (description of the supported functionality if indicator set to one) |
Notes |
|
n257 |
0 (leftmost bit) |
– FR2 power class 3 MPR as defined in clause 6.2.2.3 of 38.101-2 v16.2.0 |
– This bit may be set to 1 by a UE supporting n257 |
|
0 (leftmost bit) |
– FR2 power class 3 MPR as defined in clause 6.2.2.3 of 38.101-2 v16.2.0 |
– This bit may be set to 1 by a UE supporting n258 |
|
|
n258 |
1 |
Void |
|
|
2 |
– NS_203 as defined in clause 6.5.3.2.4 or both NS_203 and CA_NS_203 as defined in clause 6.5A.3.2.4 of 38.101-2 v15.11.0 |
– This bit shall be set to 1 by a UE supporting n258 or both n258 and CA_n258 |
|
|
n260 |
0 (leftmost bit) |
– FR2 power class 3 MPR as defined in clause 6.2.2.3 of 38.101-2 v16.2.0 |
– This bit may be set to 1 by a UE supporting n260 |
|
n261 |
0 (leftmost bit) |
– FR2 power class 3 MPR as defined in clause 6.2.2.3 of 38.101-2 v16.2.0 |
– This bit may be set to 1 by a UE supporting n261 |
Annex Q (informative):
Change history
|
Change history |
|||||||
|
Date |
Meeting |
TDoc |
CR |
Rev |
Cat |
Subject/Comment |
New version |
|
2017-08 |
RAN5 #76 |
R5-174709 |
– |
– |
– |
Draft skeleton |
0.0.1 |
|
2018-01 |
RAN5#1-5G-NR Adhoc |
R5-180002 |
– |
– |
– |
Add references |
0.1.0 |
|
2018-01 |
RAN5#1-5G-NR Adhoc |
R5-180103 |
– |
– |
– |
Add definitions, symbols and abbreviations |
0.1.0 |
|
2018-01 |
RAN5#1-5G-NR Adhoc |
R5-180104 |
– |
– |
– |
Introduction of Operating bands and Channel arrangement |
0.1.0 |
|
2018-01 |
RAN5#1-5G-NR Adhoc |
R5-180094 |
– |
– |
– |
Introduction of new test case 6.3.2 Transmit OFF power |
0.1.0 |
|
2018-01 |
RAN5#1-5G-NR Adhoc |
R5-180095 |
– |
– |
– |
TP to add skeleton of 6.5.1 Occupied bandwidth to 38.521-2 |
0.1.0 |
|
2018-01 |
RAN5#1-5G-NR Adhoc |
R5-180096 |
– |
– |
– |
TP to add skeleton of 6.5.2.1 SEM to 38.521-2 |
0.1.0 |
|
2018-01 |
RAN5#1-5G-NR Adhoc |
R5-180097 |
– |
– |
– |
TP to add skeleton of 6.5.2.3 ACLR to 38.521-2 |
0.1.0 |
|
2018-03 |
RAN5 #78 |
R5-181508 |
– |
– |
– |
Updated 38.521-2 to extend Annex with additional testing information |
0.2.0 |
|
2018-03 |
RAN5 #78 |
R5-181680 |
– |
– |
– |
TP to skeleton of 7.6.1 Inband blocking to 38.521-2 |
0.2.0 |
|
2018-03 |
RAN5 #78 |
R5-181681 |
– |
– |
– |
5G-NR: Text Proposal to add spurious emissions test case to 38.521-2 |
0.2.0 |
|
2018-04 |
RAN5#2-5G-NR Adhoc |
R5-181978 |
– |
– |
– |
Update TS 38.521-2 further to align with the latest TS 38.101-2 spec structure. |
0.3.1 |
|
2018-04 |
RAN5#2-5G-NR Adhoc |
R5-182027 |
– |
– |
– |
5G-NR Text Proposal to update spurious emissions test case to 38.521-2 |
0.4.0 |
|
2018-04 |
RAN5#2-5G-NR Adhoc |
– |
– |
– |
5G-NR Text Proposal to add REFSENS test case to 38.521-2 |
0.4.0 |
|
|
2018-04 |
RAN5#2-5G-NR Adhoc |
– |
– |
– |
General section updated to 38.521-2 |
0.4.0 |
|
|
2018-04 |
RAN5#2-5G-NR Adhoc |
R5-182048 |
– |
– |
– |
Addition of FR2 test case 6.3.1 Minimum Output Power |
0.4.0 |
|
2018-04 |
RAN5#2-5G-NR Adhoc |
– |
– |
– |
Addition of FR2 test case 6.3.3.2 General ON/OFF time mask |
0.4.0 |
|
|
2018-04 |
RAN5#2-5G-NR Adhoc |
R5-181839 |
– |
– |
– |
Definitions and abbreviations updated to 38.521-2 |
0.4.0 |
|
2018-04 |
RAN5#2-5G-NR Adhoc |
– |
– |
– |
Operating bands and Channel arrangement updated to 38.521-2 |
0.4.0 |
|
|
2018-04 |
RAN5#2-5G-NR Adhoc |
– |
– |
– |
Introduction of new test case 7.4 Maximum input level |
0.4.0 |
|
|
2018-04 |
RAN5#2-5G-NR Adhoc |
– |
– |
– |
Common uplink configuration table for Tx test cases for TS 38.521-2 non-CA |
0.4.0 |
|
|
2018-04 |
RAN5#2-5G-NR Adhoc |
– |
– |
– |
TP for 6.5.1 Occupied Bandwidth in TS 38.521-2 |
0.4.0 |
|
|
2018-04 |
RAN5#2-5G-NR Adhoc |
– |
– |
– |
TP for 6.5.2.1 Spectrum Emission Mask in TS 38.521-2 |
0.4.0 |
|
|
2018-04 |
RAN5#2-5G-NR Adhoc |
– |
– |
– |
TP for 6.5.2.3 Adjacent Channel Leakage Ratio in TS 38.521-2 |
0.4.0 |
|
|
2018-04 |
RAN5#2-5G-NR Adhoc |
– |
– |
– |
TP for 7.6.2 InBand Blocking in TS 38.521-2 |
0.4.0 |
|
|
2018-04 |
RAN5#2-5G-NR Adhoc |
– |
– |
– |
TP for 7.5 Adjacent channel selectivity in TS 38.521-2 |
0.4.0 |
|
|
2018-04 |
RAN5#2-5G-NR Adhoc |
R5-181844 |
– |
– |
– |
Add Annex G (normative): Measurement uncertainties and Test Tolerances |
0.4.0 |
|
2018-04 |
RAN5#2-5G-NR Adhoc |
R5-181844 |
– |
– |
– |
Add clause 4.4 Test point analysis |
0.4.0 |
|
2018-05 |
RAN5 #79 |
– |
– |
– |
Introduction of New FR2 test case 6.3.3.4 PRACH time mask |
0.5.0 |
|
|
2018-05 |
RAN5 #79 |
– |
– |
– |
General section updated to 38.521-2 |
0.5.0 |
|
|
2018-05 |
RAN5 #79 |
– |
– |
– |
TP for FR2 spurious test procedure (38.521-2) |
0.5.0 |
|
|
2018-05 |
RAN5 #79 |
– |
– |
– |
Update of Refsens test procedure for FR2 |
0.5.0 |
|
|
2018-05 |
RAN5 #79 |
– |
– |
– |
Definitions, symbols and abbreviations updated to 38.521-2 |
0.5.0 |
|
|
2018-05 |
RAN5 #79 |
– |
– |
– |
Operating bands and Channel arrangement updated to 38.521-2 |
0.5.0 |
|
|
2018-05 |
RAN5 #79 |
– |
– |
– |
Update minimum conformance requirements and test requirement for 6.3.2 Transmit OFF power |
0.5.0 |
|
|
2018-05 |
RAN5 #79 |
– |
– |
– |
Annex for test case applicability per permitted test method |
0.5.0 |
|
|
2018-05 |
RAN5 #79 |
– |
– |
– |
Corrections annexes for EIRP and TRP metric definition |
0.5.0 |
|
|
2018-05 |
RAN5 #79 |
– |
– |
– |
Clean up TBD from Occupied Bandwidth, SEM and ACLR test cases |
0.5.0 |
|
|
2018-05 |
RAN5 #79 |
– |
– |
– |
Clean up TBD from ACS and Inband Blocking test cases |
0.5.0 |
|
|
2018-05 |
RAN5 #79 |
R5-183948 |
– |
– |
– |
Statistical Testing Annex for 38.521-2 |
0.5.0 |
|
2018-08 |
RAN5 #80 |
R5-185348 |
– |
– |
– |
Correction to FR2 Spurious TC and introduction of TRP measurement grid requirement |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185350 |
– |
– |
– |
Addition of Frequency Error test case to TS 38.521-2 |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185490 |
– |
– |
– |
FR2_TxSpurious_TestConfig_38.521-2 |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185562 |
– |
– |
– |
FR2_StoreTxRxBeamPeakCoordinates_38.521-2 |
1.0.0 |
|
2018-08 |
RAN5 #80 |
– |
– |
– |
Update of FR2 test case 6.3.1 |
1.0.0 |
|
|
2018-08 |
RAN5 #80 |
– |
– |
– |
Update of FR2 test case 6.3.3.2 |
1.0.0 |
|
|
2018-08 |
RAN5 #80 |
– |
– |
– |
General sections updated to 38.521-2 |
1.0.0 |
|
|
2018-08 |
RAN5 #80 |
R5-185519 |
– |
– |
– |
Updates of FR2 TRx MU and TT in Annex |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185555 |
– |
– |
– |
FR2_UE_BeamlockInvoke_38.521-2 |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185191 |
– |
– |
– |
Update to Occupied Bandwidth, SEM and ACLR test cases in TS 38.521-2 |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185192 |
– |
– |
– |
Update to ACS and inband blocking test cases in TS 38.521-2 |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185187 |
– |
– |
– |
FR2_RefSens_TestConfig_38.521-2 |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185188 |
– |
– |
– |
DL and UL RMC updated for FR2 tests |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185189 |
– |
– |
– |
Downlink physical channel updated for FR2 tests |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185190 |
– |
– |
– |
OCNG Patterns updated for FR2 tests |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185194 |
– |
– |
– |
Update to Test frequencies for SEM in TS 38.521-2 |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185196 |
– |
– |
– |
Addition of Carrier Leakage test case to TS 38.521-2 |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185193 |
– |
– |
– |
Addition of Annex Global In-Channel TX-Test to 38.521-2 |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185197 |
– |
– |
– |
Introduction of maximum output power test cases |
1.0.0 |
|
2018-08 |
RAN5 #80 |
R5-185195 |
– |
– |
– |
Addition of EVM test case to TS 38.521-2 |
1.0.0 |
|
2018-09 |
RAN #81 |
– |
– |
– |
– |
raised to v15.0.0 with editorial changes only |
15.0.0 |
|
2018-12 |
RAN #82 |
R5-186504 |
0021 |
– |
F |
FR2 RefSens test case updates |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-186505 |
0022 |
– |
F |
Update Text on Store Beam Peak Coordinate |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-186510 |
0023 |
– |
F |
Structure updates to Annex C and G |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-186675 |
0026 |
– |
F |
Updating test case 6.2.3 maximum output power with additional requirements |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-187151 |
0034 |
– |
F |
Updated to Annexes for FR2 tests |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-187152 |
0035 |
– |
F |
General Information updated for TS38.521-2 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-187561 |
0042 |
– |
F |
Update to Table 5.3.5-1 in TS 38.521-2 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-187619 |
0050 |
– |
F |
Update of Section 6.3.3.1 General |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-187838 |
0045 |
1 |
F |
Update of transmit signal quality test cases in 38.521-2 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-187839 |
0046 |
1 |
F |
Addition of In-band Emissions test case to TS 38.521-2 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-187840 |
0047 |
1 |
F |
Addition of EVM equalizer spectral flatness test cases 6.4.2.4 and 6.4.2.5 to TS 38.521-2 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-187841 |
0048 |
1 |
F |
Update of Common Uplink Configuration for FR2 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-187842 |
0029 |
1 |
F |
General sections updated to 38.521-2 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-187843 |
0044 |
1 |
F |
Update of Global In-channel Tx Test Annex in 38.521-2 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-187886 |
0020 |
1 |
F |
FR2 Spurious Emission test case updates |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-187912 |
0038 |
1 |
F |
Addition of notes to clarify test point selection into general section of TS 38.521-2 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-188037 |
0032 |
1 |
F |
Removing the Editor’s notes of SA messages and procedures for all FR2 test cases |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-188038 |
0036 |
1 |
F |
FR2 downlink signal level(38.521-2) |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-188063 |
0027 |
1 |
F |
Update of FR2 6.3.2 Transmit OFF power |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-188212 |
0040 |
2 |
F |
Updates to maximum output power test cases |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-188213 |
0028 |
1 |
F |
Update of FR2 test case 7.4 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-188214 |
0025 |
1 |
F |
Updates of TT in TS 38.521-2 Annex F during RAN5#81 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-188215 |
0031 |
1 |
F |
TDD configuration for UE Tx test in FR2 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-188216 |
0039 |
1 |
F |
Core alignment CR to capture TS 38.101-2 updates during RAN4#89 |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-188217 |
0041 |
2 |
F |
On measurement grids |
15.1.0 |
|
2018-12 |
RAN #82 |
R5-188218 |
0043 |
1 |
F |
Update to Annex K |
15.1.0 |
|
2018-12 |
RAN #82 |
RP-182736 |
0024 |
2 |
F |
Updates of MU Annex F |
15.1.0 |
|
2019-03 |
RAN #83 |
R5-191091 |
0083 |
– |
F |
Updates of TT in TS38.521-2 Annex F during RAN5#NR4 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191092 |
0084 |
– |
F |
Editorial correction of core alignment in TS 38.521-2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191093 |
0085 |
– |
F |
Editorial cleaning up of test configuration tables in TS 38.521-2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191246 |
0086 |
– |
F |
Update TRP measurement procedure Annex in TS38.521-2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191247 |
0087 |
– |
F |
Update Annex K and Annex M in TS38.521-2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191259 |
0088 |
– |
F |
Update to FR2 test case 6.3.3.4 PRACH time mask |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191507 |
0090 |
– |
F |
Shared Risk clarification in TS 38.521-2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191609 |
0093 |
– |
F |
CR to TS 38.521-2 to add text proposal for Annex F.1 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191676 |
0094 |
– |
F |
Addition of FR2 6.2.4 Configured transmitted power |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191677 |
0095 |
– |
F |
Update of FR2 6.3.1 Minimum Output Power |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191679 |
0096 |
– |
F |
Addition of FR2 6.3.4.2 Absolute power tolerance |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191680 |
0097 |
– |
F |
Update of FR2 6.3.3.2 General ON/OFF time mask |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191793 |
0098 |
– |
F |
Introduction of Minimum output power for 2UL CA |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191809 |
0099 |
– |
F |
OBW test procedure update for 38.521-2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191812 |
0100 |
– |
F |
FR2 Spurious Emission test case updates |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191824 |
0102 |
– |
F |
Update to Annex K and Annex L |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-191986 |
0107 |
– |
F |
Introduction of Annex on Characteristics of the Interfering Signal FR2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192092 |
0110 |
– |
F |
Test mode and test loop function activation in SA Tx RF test cases in TS 38.521-2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192095 |
0111 |
– |
F |
Test mode and test loop function activation in SA Rx RF test cases in TS 38.521-2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192122 |
0112 |
– |
F |
Update of Global In-channel Tx Test Annex for FR2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192450 |
0089 |
1 |
F |
Update of test case 6.3.4.3, Relative power tolerance in 38.521-2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192451 |
0082 |
1 |
F |
Updates of test environment for frequency error |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192452 |
0105 |
1 |
F |
FR2 SA Spurious Emission Coexistence test case |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192648 |
0106 |
1 |
F |
Introduction of Aggregate power tolerance in NR SA FR2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192649 |
0117 |
1 |
F |
CR to add UL RMC for 60kHz SCS in Annex A.2.3 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192650 |
0113 |
1 |
F |
Update of transmit signal quality test cases for FR2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192651 |
0114 |
1 |
F |
Update OBW test case in TS 38.521-2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192652 |
0115 |
1 |
F |
Update SEM test case in TS 38.521-2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192653 |
0116 |
1 |
F |
Update ACLR test case in TS 38.521-2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192654 |
0101 |
1 |
F |
FR2 Reference Sensitivity test case updates |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192655 |
0104 |
1 |
F |
FR2 Reference Sensitivity EIS spherical coverage |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192667 |
0108 |
1 |
F |
Update of Annex F.2 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192849 |
0080 |
2 |
F |
Updates of MU in TS38.521-2 Annex F during RAN5#82 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192843 |
0081 |
2 |
F |
Updates of TT in TS38.521-2 Annex F during RAN5#82 |
15.2.0 |
|
2019-03 |
RAN #83 |
R5-192680 |
0103 |
1 |
F |
38.521-2 Editor’s Note Updates |
15.2.0 |
|
2019-03 |
RAN #83 |
RP-190746 |
0118 |
4 |
F |
Updates to maximum output power test cases |
15.2.0 |
|
2019-03 |
RAN#83 |
– |
– |
– |
– |
Editorial correction of references to TS 38.508-1 clause 4.6 tables |
15.2.0 |
|
2019-06 |
RAN#84 |
R5-193541 |
0137 |
– |
F |
Alignment of scheduling of DL RMC with scheduling of UL RMC |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-193552 |
0138 |
– |
F |
Core alignment of RAN4 pending issues in TS 38.521-2 |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-193575 |
0143 |
– |
F |
Correction of 38.521-2 7.4 |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-193749 |
0151 |
– |
F |
Updates of ACLR test procedure |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-193820 |
0152 |
– |
F |
Correction of 38.521-2 clause 2 to 5 |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194009 |
0153 |
– |
F |
FR2 Reference Sensitivity test case updates |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194243 |
0161 |
– |
F |
Addition FR2 blocking measurement procedure in Annex K |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194264 |
0163 |
– |
F |
Correction to FR2 EIRP test configurations |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194265 |
0164 |
– |
F |
Correction to FR2 EIS test configurations |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194269 |
0165 |
– |
F |
Update FR2 ACS and Inband blocking test cases |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194461 |
0170 |
– |
F |
Update to 6.2.3 A-MPR FR2 |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194618 |
0171 |
– |
F |
Update of Global In-channel Tx Test Annex for FR2 |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194958 |
0139 |
1 |
F |
Updates of MU and TT in TS 38.521-2 Annex F during RAN5#NR5 |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194968 |
0167 |
1 |
F |
Update of TC 6.3A.1.1 Minimum output power for 2UL CA |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194969 |
0166 |
1 |
F |
Clean up FR2 SA test cases |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194970 |
0160 |
1 |
F |
Introduction of beam correspondence |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194971 |
0162 |
1 |
F |
Introduction of beam correspondence for CA |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194976 |
0173 |
1 |
F |
Update of Frequency Error Test Case for FR2 |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-194977 |
0175 |
1 |
F |
Editorial corrections for 6.2.1 UE maximum output power |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195080 |
0176 |
– |
F |
Update of FR2 ON_ON time mask test cases |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195147 |
0141 |
1 |
F |
Addition of new SA FR2 RF test case 6.2.2 |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195149 |
0142 |
1 |
F |
Correction of 38.521-2 6.3.2 |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195151 |
0144 |
1 |
F |
Introduction of MOP (SA UL CA) |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195152 |
0145 |
1 |
F |
Introduction of OFF power (SA UL CA) |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195153 |
0146 |
1 |
F |
Introduction of Frequency error (SA UL CA) |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195154 |
0148 |
1 |
F |
Introduction of SEM (SA UL CA) |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195155 |
0149 |
1 |
F |
Introduction of ACLR (SA UL CA) |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195156 |
0150 |
1 |
F |
Introduction of General Spurious (SA UL CA) |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195157 |
0157 |
1 |
F |
Introduction of New test case 6.5A.1.1 Occupied bandwidth for CA (2UL CA) |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195158 |
0156 |
1 |
F |
Update Out of band emission test cases in TS 38.521-2 |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195160 |
0159 |
1 |
F |
Introduction of SRS time mask for UL-MIMO |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195404 |
0172 |
1 |
F |
Update of transmit signal quality test cases for FR2 |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195417 |
0154 |
1 |
F |
38.521-2 implementation of FR2 UL demod OTA tests using single pol Rx TE |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195432 |
0168 |
2 |
F |
Update to 6.2.1.1 UE maximum output power – EIRP and TRP |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195433 |
0169 |
2 |
F |
Update to 6.2.1.2 UE maximum output power – Spherical coverage |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195434 |
0140 |
1 |
F |
Updates of MU and TT in TS 38.521-2 |
15.3.0 |
|
2019-06 |
RAN#84 |
R5-195435 |
0155 |
1 |
F |
Core alignment with TS 38.101-2 |
15.3.0 |
|
2019-06 |
RAN#84 |
– |
– |
– |
– |
Administrative release upgrade to match the release of 3GPP TS 38.508-1 and TS 38.521-1 which were upgraded at RAN#84 to Rel-16 due to Rel-16 relevant CR(s) |
16.0.0 |
|
2019-09 |
RAN#85 |
R5-195695 |
0178 |
– |
F |
Change of TS 38.521-2 UL CA MOP Minimum conformance requirements |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196069 |
0194 |
– |
F |
Introduction of absolute power tolerance for CA test cases |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196165 |
0198 |
– |
F |
Correction of wrong spec reference numbers for TS 38.508-1 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196236 |
0202 |
– |
F |
Correction to test procedure of TC 6.4.2.2 Carrier Leakage |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196240 |
0206 |
– |
F |
Clarification on EVM test requirement for PUCCH and PRACH |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196427 |
0208 |
– |
F |
Update of FR2 6.2.4 Configured transmitted power |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196428 |
0209 |
– |
F |
Update of FR2 6.3.3.2 General ON_OFF time mask |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196431 |
0211 |
– |
F |
Addition of FR2 6.2A.4 Configured transmitted power for 2UL CA |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196433 |
0213 |
– |
F |
Addition of FR2 6.2D.4 Configured transmitted power for UL MIMO |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196434 |
0214 |
– |
F |
Addition of FR2 6.3D.1 Minimum output power for UL MIMO |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196594 |
0220 |
– |
F |
Addition of new test case 6.4A.2.1.2 Error vector magnitude for 3UL CA in FR2 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196595 |
0221 |
– |
F |
Addition of new test case 6.4A.2.1.3 Error vector magnitude for 4UL CA in FR2 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196650 |
0225 |
– |
F |
Update of Minimum conformance requirements and test configurations in TC 6.2.2 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196810 |
0229 |
– |
F |
Update to TRP measurement grid section in TS 38.521-2 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-196950 |
0239 |
– |
F |
Corrections on clause 2 and 3 in 38.521-2 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197384 |
0197 |
1 |
F |
Update UL-MIMO to UL MIMO to align with RAN4 terminology in FR2 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197385 |
0238 |
1 |
F |
Update OBW FR2 test case |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197386 |
0200 |
1 |
F |
Alignment of clause 2 to 5 with the core spec |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197387 |
0242 |
– |
F |
Integrating the QoQZ Procedures into 38.521-2 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197388 |
0219 |
1 |
F |
Addition of new test case 6.4A.2.1.1 Error vector magnitude for 2UL CA in FR2 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197389 |
0222 |
1 |
F |
Update of TC 6.3A.1.1 Minimum output power for 2UL CA |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197390 |
0223 |
1 |
F |
Addition of new test case 6.3A.1.2 Minimum output power for 3UL CA in FR2 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197391 |
0224 |
1 |
F |
Addition of new test case 6.3A.1.3 Minimum output power for 4UL CA in FR2 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197392 |
0227 |
1 |
F |
Update of Common Uplink Configuration table for PC3 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197393 |
0212 |
1 |
F |
Addition of FR2 6.3A.3 ON_OFF time mask for 2 UL CA |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197394 |
0215 |
1 |
F |
Addition of FR2 6.3D.3 General ON_OFF power for UL MIMO |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197395 |
0199 |
1 |
F |
Addition of new Annex N (normative): UE coordinate system |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197500 |
0231 |
1 |
F |
Update of Spurious Emissions TRP test procedure |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197501 |
0233 |
1 |
F |
Update of FR2 MUs in TS 38.521-2 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197503 |
0230 |
1 |
F |
Update of TRP measurement grids for spurious emissions |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197529 |
0180 |
1 |
F |
New Introduction of TC 6.2A.1.2.1 UE Maximum output power Spherical coverage 2UL CA |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197530 |
0181 |
1 |
F |
New Introduction of TC 6.2A.1.2.2 UE Maximum output power Spherical coverage 3UL CA |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197531 |
0182 |
1 |
F |
New Introduction of TC 6.2A.1.2.3 UE Maximum output power Spherical coverage 4UL CA |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197532 |
0183 |
1 |
F |
New Introduction of TC 6.4A.2.2.1 Carrier leakage 2UL CA |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197533 |
0184 |
1 |
F |
New Introduction of TC 6.4A.2.2.2 Carrier leakage 3UL CA |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197534 |
0185 |
1 |
F |
New Introduction of TC 6.4A.2.2.3 Carrier leakage 4UL CA |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197535 |
0189 |
1 |
F |
Rel-16_NR_38.521-2_Addition of new TC 6.2A.1.1.1 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197536 |
0193 |
1 |
F |
Additions to the SRS time mask for UL-MIMO test case |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197537 |
0195 |
1 |
F |
Additions to the beam correspondence test case |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197538 |
0203 |
1 |
F |
Correction to RB allocation in 6.2.2 UE maximum output power reduction |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197539 |
0204 |
1 |
F |
Correction to number of measurements of 6.4.2.3 In-band emissions |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197540 |
0205 |
1 |
F |
Correction to UBF in transmit modulation quality test cases |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197541 |
0226 |
1 |
F |
Update of FR2 A-MPR test case |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197543 |
0190 |
1 |
F |
Refsens test case updates |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197544 |
0196 |
1 |
F |
Introduction of beam correspondence to direct far field (DFF) |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197545 |
0216 |
1 |
F |
Updated to Annex A for RF FR2 tests |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197546 |
0232 |
1 |
F |
Integrating the Re-Positioning Concept into Annex K |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197614 |
0191 |
1 |
F |
Spurious test case updates |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197642 |
0201 |
1 |
F |
Correction to 6.5.2.1 SEM and 6.5.2.3 ACLR to consider MPR values |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197643 |
0210 |
2 |
F |
Addition of FR2 6.2A.2 MPR for 2 UL CA |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197644 |
0177 |
2 |
F |
Updates of MU and TT in TS 38.521-2 |
16.1.0 |
|
2019-09 |
RAN#85 |
R5-197645 |
0234 |
2 |
F |
Addition of the connection setup in TS 38.521-2 |
16.1.0 |
|
2019-12 |
RAN#86 |
R5-198072 |
0247 |
– |
F |
Introduction of 4 New test cases 6.5A.1 Occupied bandwidth for CA |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-198073 |
0248 |
– |
F |
Introduction of 4 New test cases 6.5A.2.1 Spectrum Emission Mask for CA |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-198075 |
0249 |
– |
F |
Introduction of 4 New test cases 6.5A.2.2 Adjacent channel leakage ratio for CA |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-198078 |
0250 |
– |
F |
New Introduction of TC 6.2A.1.2.4 UE maximum output power – Spherical coverage 5UL CA |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-198079 |
0251 |
– |
F |
New Introduction of TC 6.2A.1.2.5 UE maximum output power – Spherical coverage 6UL CA |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-198080 |
0252 |
– |
F |
New Introduction of TC 6.2A.1.2.6 UE maximum output power – Spherical coverage 7UL CA |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-198081 |
0253 |
– |
F |
New Introduction of TC 6.2A.1.2.7 UE maximum output power – Spherical coverage 8UL CA |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-198210 |
0260 |
– |
F |
Addition of Common Uplink Configuration for PC1 in SA FR2 6.1 |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-198381 |
0267 |
– |
F |
Introduction of beam correspondence side conditions |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-198385 |
0269 |
– |
F |
Update of minimum conformance requirements for SA FR2 7.4 |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-198636 |
0276 |
– |
F |
General clause updated for FR2 spec |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-198730 |
0278 |
– |
F |
Correction of test requirements |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199086 |
0262 |
1 |
F |
CR to 38.521-2 on Measurement Grids for PC1 UEs |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199087 |
0243 |
2 |
F |
Updates of MU and TT in TS 38.521-2 |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199356 |
0245 |
1 |
F |
Update of FR2 6.3.3.2 ON-OFF time mask |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199357 |
0244 |
1 |
F |
Update of FR2 6.3.1 minimum output power |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199358 |
0263 |
1 |
F |
CR to 38.521-2 on optimized search procedure for REFSENS |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199359 |
0264 |
1 |
F |
CR to 38.521-2 on optimized search procedure for RX Beam Peak Search |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199360 |
0254 |
1 |
F |
Updating incorrect note in test procedure |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199361 |
0256 |
1 |
F |
Spurious UL MIMO test case updates |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199373 |
0265 |
1 |
F |
Introduction of New TC 6.4A.2.3.1 In-band emissions for 2UL CA |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199374 |
0266 |
1 |
F |
Update to test case 6.3.3.4 PRACH time mask in FR2 |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199375 |
0257 |
1 |
F |
Ref Sens UL MIMO test case updates |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199376 |
0258 |
1 |
F |
Alignment of clause 3 to 5 with the core spec |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199461 |
0271 |
2 |
F |
Further updates to the SRS time mask for UL-MIMO test case |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199473 |
0282 |
– |
F |
Update to UE maximum output power – Spherical coverage |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199483 |
0277 |
1 |
F |
Update of applicability for Spherical coverage and Beam Correspondence test cases |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199494 |
0281 |
1 |
F |
Add section 4.5 Applicability and test coverage rules |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199495 |
0246 |
1 |
F |
Update of FR2 6.3.4.2 absolute power tolerance |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199496 |
0270 |
1 |
F |
Further updates to the absolute power tolerance for CA test cases |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199504 |
0259 |
1 |
F |
Addition of test requirements and update of minimum conformance requirements and test configurations for SA FR2 6.2.2 |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199548 |
0268 |
1 |
F |
Updates to the beam correspondence TC |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199579 |
0279 |
1 |
F |
Update of quality of quiet zone validation procedure |
16.2.0 |
|
2019-12 |
RAN#86 |
R5-199586 |
0275 |
1 |
F |
Update on FR2 Spurious Test in 38.521-2 |
16.2.0 |
|
2020-03 |
RAN#87 |
R5-200319 |
0288 |
F |
CR to 38.521-2 on CDF/PDF Scaling Factor |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200320 |
0289 |
F |
CR to 38.521-2: Correction to TRP grid |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200368 |
0292 |
F |
Addition of new test case 6.3A.1.4 Minimum output power for 5UL CA in FR2 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200369 |
0293 |
F |
Addition of new test case 6.3A.1.5 Minimum output power for 6UL CA in FR2 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200372 |
0294 |
F |
Addition of new test case 6.3A.1.6 Minimum output power for 7UL CA in FR2 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200374 |
0295 |
F |
Addition of new test case 6.3A.1.7 Minimum output power for 8UL CA in FR2 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200375 |
0296 |
F |
Addition of new test case 6.4A.2.1.4 Error vector magnitude for 5UL CA in FR2 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200376 |
0297 |
F |
Addition of new test case 6.4A.2.1.5 Error vector magnitude for 6UL CA in FR2 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200377 |
0298 |
F |
Addition of new test case 6.4A.2.1.6 Error vector magnitude for 7UL CA in FR2 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200382 |
0300 |
F |
Addition of new test case 6.4A.2.1.7 Error vector magnitude for 8UL CA in FR2 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200383 |
0301 |
F |
Update of test cases for Error vector magnitude for CA in FR2 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200418 |
0302 |
F |
Update of Operating bands and Channel arrangement of SA FR2 R15 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200444 |
0303 |
F |
Clarification of measurement interval of frequency error in FR2 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200557 |
0309 |
F |
Clarify absolute power tolerance for CA TP3 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200602 |
0312 |
F |
Updates to reference sensitivity test case |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200656 |
0317 |
F |
Correction of Editor’s note of 6.2.2 and 6.3.2 of SA FR2 R15 |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-201248 |
0318 |
1 |
F |
Alignment of Table A.3.1-1 in 38.521-2 to core spec 38.101-2 |
16.3.0 |
|
2020-03 |
RAN#87 |
R5-200800 |
0319 |
F |
Update of Standalone FR2 A-MPR test case |
16.3.0 |
|
|
2020-03 |
RAN#87 |
R5-200894 |
0286 |
1 |
F |
Correction to TC 6.3.4.4 Aggregate power tolerance |
16.3.0 |
|
2020-03 |
RAN#87 |
R5-200910 |
0310 |
1 |
F |
Beam correspondence TC message contents clarifications |
16.3.0 |
|
2020-03 |
RAN#87 |
R5-200911 |
0285 |
1 |
F |
Update of Clause 4 in TS 38.521-2 |
16.3.0 |
|
2020-03 |
RAN#87 |
R5-200980 |
0284 |
1 |
F |
Correction of reference numbers in TS 38.521-2 |
16.3.0 |
|
2020-03 |
RAN#87 |
R5-200992 |
0291 |
1 |
F |
Updates of MU and TT in TS 38.521-2 for Rel-16 |
16.3.0 |
|
2020-03 |
RAN#87 |
R5-201059 |
0305 |
1 |
F |
Update of rx beampeak search |
16.3.0 |
|
2020-03 |
RAN#87 |
R5-201060 |
0307 |
1 |
F |
Update of absolute power tolerance for test point 3 |
16.3.0 |
|
2020-03 |
RAN#87 |
R5-201161 |
0313 |
1 |
F |
Updates to test case relative power tolerance 6.3.4.3 |
16.3.0 |
|
2020-03 |
RAN#87 |
R5-201192 |
0283 |
1 |
F |
Updates of MU and TT in TS 38.521-2 |
16.3.0 |
|
2020-03 |
RAN#87 |
R5-201244 |
0311 |
3 |
F |
Correction of the FR2 RMC slot patterns for MOP test cases |
16.3.0 |
|
2020-06 |
RAN#88 |
R5-201328 |
0321 |
– |
F |
Add n261 to FR2 ACLR requirements |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201330 |
0323 |
– |
F |
Update to UBF command implementation for Relative power sub tests |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201795 |
0325 |
– |
F |
Introduction of New TC 6.4A.2.2.4 Carrier leakage for 5UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201796 |
0326 |
– |
F |
Introduction of New TC 6.4A.2.2.5 Carrier leakage for 6UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201797 |
0327 |
– |
F |
Introduction of New TC 6.4A.2.2.6 Carrier leakage for 7UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201811 |
0328 |
– |
F |
Introduction of New TC 6.4A.2.2.7 Carrier leakage for 8UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201812 |
0329 |
– |
F |
Introduction of New TC 6.4A.2.3.2 In-band emissions for 3UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201813 |
0330 |
– |
F |
Introduction of New TC 6.4A.2.3.3 In-band emissions for 4UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201814 |
0331 |
– |
F |
Introduction of New TC 6.4A.2.3.4 In-band emissions for 5UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201815 |
0332 |
– |
F |
Introduction of New TC 6.4A.2.3.5 In-band emissions for 6UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201835 |
0333 |
– |
F |
Correction of FR2 PUCCH EVM definition |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201849 |
0334 |
– |
F |
Updating common uplink allocation for PC1 |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201850 |
0335 |
– |
F |
Cleaning up references to common uplink configuration |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-201851 |
0336 |
– |
F |
Updating test requirements of 6.2.3 AMPR for NS_201 |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202045 |
0342 |
– |
F |
Correction of test metric in minimum conformance requirements and some test style in 6.3.2 of SA FR2 R15 |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202046 |
0343 |
– |
F |
Correction of uplink configuration table number in minimum conformance requirements and test requirement table of 7.4 of SA FR2 R15 |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202120 |
0346 |
– |
F |
CR to 38.521-2 to correct Clenshaw-Curtis Weight Equations |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202122 |
0348 |
– |
F |
CR to 38.521-2 to clarify the applicability of QoQZ validation |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202135 |
0354 |
– |
F |
Update to 6 test cases 6.5A.2.1.x Spectrum Emission Mask for 3 to 8 UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202137 |
0356 |
– |
F |
Update to 6 test cases 6.5A.2.2.x Adjacent channel leakage ratio for 3 to 8 UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202447 |
0367 |
– |
F |
Editorial correction to the test requirement of in-band blocking |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202450 |
0368 |
– |
F |
Correction of Spectrum Emission Mask CA test cases |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202504 |
0372 |
– |
F |
CR on EVM Window Centre Timing Definition in FR2 |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202720 |
0345 |
1 |
F |
CR to 38.521-2 to correct Clenshaw-Curtis Weights at the Poles for CDF/CCDF |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202722 |
0364 |
1 |
F |
Additions to Initial Conditions and Messages for SRS time mask with UL MIMO |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202723 |
0337 |
1 |
F |
Aligning test procedure for Rx beam peak direction |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202724 |
0341 |
1 |
F |
Alignment of section 3 and 5 with core spec of SA FR2 R15 |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202808 |
0365 |
1 |
F |
Receiver characteristics testing update to 38.521-2 |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202824 |
0351 |
1 |
F |
Update to test case 6.5A.1.1 Occupied bandwidth for 2UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202825 |
0353 |
1 |
F |
Update to test case 6.5A.2.1.1 Spectrum Emission Mask for 2UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202826 |
0355 |
1 |
F |
Update to test case 6.5A.2.2.1 Adjacent channel leakage ratio for 2UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202827 |
0371 |
1 |
F |
Update to 6 test cases 6.5A.1.x Occupied bandwidth for 3 to 8 UL CA |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202828 |
0338 |
1 |
F |
Updating SRS config table in test case 6.3D.3.4 |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202885 |
0322 |
1 |
F |
Add NS 202 requirements to FR2 additional spurious emission test case |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202893 |
0349 |
1 |
F |
Editorial correction of test case 6.5.1 Occupied bandwidth to align with core spec |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202894 |
0350 |
1 |
F |
Editorial correction of Tx test cases for Out of band emission to align with core spec |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202895 |
0357 |
1 |
F |
Clarification of disabling Tx diversity for FR2 UE for SA FR2 testing |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202896 |
0358 |
1 |
F |
Updates of Test Points of Tx CA test cases |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202897 |
0360 |
1 |
F |
Correction on txDirectCurrentLocation in FR2 SA tests |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202898 |
0370 |
1 |
F |
Update on transmit modulation quality test cases |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202899 |
0361 |
1 |
F |
Update to SA FR2 Receiver Spurious Emission Test Case |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202943 |
0363 |
1 |
F |
CR to 38.521-2: On the order of test steps for output power dynamics test cases |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202968 |
0359 |
1 |
F |
Core spec alignment of k1 value for RF test cases |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-202990 |
0362 |
2 |
F |
Updates of FR2 MU and TT in TS 38.521-2 |
16.4.0 |
|
2020-06 |
RAN#88 |
R5-203117 |
0347 |
2 |
F |
CR to 38.521-2 to properly define Link and Meas Angles |
16.4.0 |
|
2020-09 |
RAN#89 |
R5-203292 |
0373 |
– |
F |
Clarification of Interferer frequency selection in FR2 IBB test case 7.6.2 |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-203875 |
0392 |
– |
F |
Alignment of general sections with core spec of SA FR2 R15 |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-203969 |
0394 |
– |
F |
Updating beam correspondence capability |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204264 |
0412 |
– |
F |
Editorial correction of ACLR CA test cases |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204265 |
0413 |
– |
F |
Editorial correction of Annex C.3 Connection |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204266 |
0414 |
– |
F |
Update of FR2 OBW test case |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204713 |
0382 |
1 |
F |
Correction to test configuration for Carrier leakage for CA |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204714 |
0383 |
1 |
F |
Correction to TC 6.4A.2.3.1 In-band emissions for 2UL CA |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204715 |
0384 |
1 |
F |
Correction to test cases 6.4A.2.3.x In-band emissions for 3 to 6 UL CA |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204716 |
0385 |
1 |
F |
Introduction of New TC 6.4A.2.3.6 In-band emissions for 7UL CA |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204717 |
0386 |
1 |
F |
Introduction of New TC 6.4A.2.3.7 In-band emissions for 8UL CA |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204763 |
0393 |
1 |
F |
Miscellaneous corrections due to core spec alignment |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204764 |
0415 |
1 |
F |
Update of Tx signal quality test cases |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204765 |
0395 |
1 |
F |
Addition of UL power setting for Rx test cases |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204856 |
0403 |
1 |
F |
CR to update MU and TT in 38.521-2 |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204857 |
0380 |
1 |
F |
Beam correspondence – SRS configuration corrections in section 6.6.1 |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204858 |
0397 |
1 |
F |
CR to 38.521-2 to update Absolute Power Tolerance for CA on the order of test steps |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204859 |
0401 |
1 |
F |
CR to TS 38.521-2: Correction to MB relaxation minimum requirements |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204860 |
0406 |
1 |
F |
CR to 38.521-2 to adjust the test step sequences |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204861 |
0407 |
1 |
F |
CR to 38.521-2 to allow vendor declarations related to beam peak searches |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204862 |
0408 |
1 |
F |
CR to 38.521-2 on QoQZ Verification Clarification |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204863 |
0411 |
1 |
F |
FR2 Minimum output power MU updates |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204864 |
0417 |
1 |
F |
FR2 EIRP OFF power MU updates |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204865 |
0379 |
1 |
F |
Beam correspondence – SRS configuration corrections in annex K.1.1 |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204914 |
0388 |
1 |
F |
Updates to test case 6.3.4.3, relative power tolerance |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204915 |
0398 |
1 |
F |
CR to 38.521-2 to update Transmit OFF Power |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204916 |
0399 |
1 |
F |
CR to TS 38.521-2: Correction to time mask requirements |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204917 |
0402 |
1 |
F |
Clean up complete status for FR2 SA test cases |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204918 |
0404 |
1 |
F |
Update to UE maximum output power for CA |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204919 |
0410 |
1 |
F |
FR2 Minimum output power measurement period definition |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204920 |
0389 |
1 |
F |
FR2 RefSens and EIS spherical PC3 MBR table update |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204921 |
0396 |
1 |
F |
Addition of modified MPR behaviour |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204922 |
0400 |
1 |
F |
CR to TS 38.521-2: Annex F EIRP OFF Power |
16.5.0 |
|
2020-09 |
RAN#89 |
R5-204923 |
0409 |
1 |
F |
CR to TS 38.521-2 on DUT alignment options |
16.5.0 |
|
2020-09 |
RAN#89 |
RP-201671 |
0418 |
– |
F |
Adding FR2 PDCCH Aggregation Level in Annex C.3 |
16.5.0 |
|
2020-12 |
RAN#90 |
R5-205259 |
0420 |
– |
F |
Addition of new test case 6.4D.3 Time alignment error for UL MIMO in FR2 |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-205260 |
0421 |
– |
F |
Addition of new test case 6.5D.1 Occupied bandwidth for UL MIMO in FR2 |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-205496 |
0422 |
– |
F |
Alignment of general sections with core spec |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-205497 |
0423 |
– |
F |
Correction of minimum conformance requirements for 6.2.2 MPR |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-205536 |
0427 |
– |
F |
Aligning tested subframe numbers with defined RMC in test case 6.3.4.3 |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-205573 |
0428 |
– |
F |
Adding a new note in test configuration table for ACLR and SEM test case |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-205711 |
0431 |
– |
F |
FR2 EIS editor’s note clean up |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-205811 |
0433 |
– |
F |
Correction to Carrier leakage for CA |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-205812 |
0434 |
– |
F |
Correction to In-band emissions for CA |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-205854 |
0438 |
– |
F |
Correction of transmission gap for relative power tolerance TC 6.3.4.3 |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206009 |
0439 |
– |
F |
Update of in-band emission and carrier leakage test cases |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206206 |
0448 |
– |
F |
Update of occupied bandwidth test case |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206210 |
0449 |
– |
F |
Correction of Annex F for absolute power tolerance for CA |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206644 |
0437 |
1 |
F |
Correction of MBW for output power dynamics TCs 6.3.x and ACLR TC 6.5.2.3 |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206645 |
0440 |
1 |
F |
Correction of 6.2.3.3.1 for UE additional maximum power reduction |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206646 |
0419 |
1 |
F |
Forgotten change extending Table range to N.2-7 |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206647 |
0430 |
1 |
F |
CR to update DMRS position in UL RMC for FR2 |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206821 |
0442 |
1 |
F |
CR to 38.521-2 on ETC Testing |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206822 |
0445 |
1 |
F |
Minimum output power updates |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206823 |
0446 |
1 |
F |
FR2 time masks updates |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206824 |
0443 |
1 |
F |
Update FR2 TRx MU and TT in 38.521-2 |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206825 |
0444 |
1 |
F |
Minimum output power measurement uncertainties and test tolerances |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206826 |
0447 |
1 |
F |
FR2 Time masks updates |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206865 |
0429 |
1 |
F |
Update on Test points of FR2 Transmit OFF power for CA |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206866 |
0432 |
1 |
F |
Adding NS202 and NS203 to MOP and Spurious |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206867 |
0435 |
1 |
F |
Addition of 6.5D.2.1 Spectrum Emission Mask for UL MIMO in FR2 |
16.6.0 |
|
2020-12 |
RAN#90 |
R5-206868 |
0436 |
1 |
F |
Addition of 6.5D.2.2 Adjacent channel leakage ratio for UL MIMO in FR2 |
16.6.0 |
|
2021-03 |
RAN#91 |
R5-210489 |
0457 |
– |
F |
Correction of test purpose for 6.3.2 Transmit OFF power |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-210490 |
0458 |
– |
F |
Addition of new test case 6.3D.2 Transmit OFF power for UL MIMO |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-210491 |
0459 |
– |
F |
Correction of test applicability and test description for 7.4 Maximum input level |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-210492 |
0460 |
– |
F |
Addition of new test cases for 7.4A Maximum input level for CA |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-210494 |
0462 |
– |
F |
Removal of brackets for MU of EIS spherical coverage |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-210495 |
0463 |
– |
F |
Correction of Annex P for Modified MPR behaviour |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-210496 |
0464 |
– |
F |
Correction of definition for EIS |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-210565 |
0467 |
– |
F |
Update of waveform to be used during Rx peam peak search in Annex K.1.2 |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-210724 |
0468 |
– |
F |
Omitting of FR2 Rx cases with UL-MIMO on TDD bands |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-210729 |
0471 |
– |
F |
Removing test condition of extreme voltage |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-210731 |
0473 |
– |
F |
Adding definition of FR2a, FR2b and FR2c in general section |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-210732 |
0474 |
– |
F |
Cleaning up of Annex K |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211094 |
0481 |
– |
F |
Correction to assumption of aggregated channel bandwidth in TC 6.5A.2.2 |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211097 |
0484 |
– |
F |
Definition of relaxation value of spurious emissions UE co-existence in TC 6.5.3.2 |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211110 |
0486 |
– |
F |
Corrections to subclauses in 38.521-2 with appropriate subclause level and heading styles |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211126 |
0488 |
– |
F |
Update of 5.5A.2 for corrections to configurations for intra-band non-contiguous CA |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211683 |
0456 |
1 |
F |
Editorial corrections in Occupied bandwidth test procedure |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211684 |
0465 |
1 |
F |
FR2 UL CA Frequency error test cases update |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211685 |
0469 |
1 |
F |
Addition of Inner_partial allocation in general section and a few test cases |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211686 |
0470 |
1 |
F |
Correction of parameter configuration for open loop power control |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211688 |
0476 |
1 |
F |
Addition of new test case 6.2A.1.1.4 UE maximum output power – EIRP and TRP for 5UL CA |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211689 |
0477 |
1 |
F |
Addition of new test case 6.2A.1.1.5 UE maximum output power – EIRP and TRP for 6UL CA |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211690 |
0478 |
1 |
F |
Addition of new test case 6.2A.1.1.6 UE maximum output power – EIRP and TRP for 7UL CA |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211691 |
0479 |
1 |
F |
Addition of new test case 6.2A.1.1.7 UE maximum output power – EIRP and TRP for 8UL CA |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211692 |
0487 |
1 |
F |
Corrections to reference figures for transmission bandwidth configuration in FR2 |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211693 |
0493 |
1 |
F |
Update of Annex F for test case 7.3.4 |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211863 |
0466 |
1 |
F |
FR2 MPR, ACLR and SEM test cases update as per TP analysis update |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211864 |
0472 |
1 |
F |
Cleaning up of FR2 test specification |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211865 |
0475 |
1 |
F |
Update of TX Test Cases for UL MIMO in FR2 |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211866 |
0482 |
1 |
F |
Correction to definition of power control window size in FR2 relative power tolerance in TC 6.3.4.3 |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211867 |
0491 |
1 |
F |
FR2 Tx additional spurious emission test case updates |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211868 |
0453 |
1 |
F |
ACS FR2 test case update |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211869 |
0454 |
1 |
F |
IBB FR2 test case update |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211919 |
0451 |
1 |
F |
Introduction of FR2 DL 256QAM |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211921 |
0480 |
1 |
F |
Correction to ACLR relaxation value in TC 6.5.2.3 |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211922 |
0455 |
1 |
F |
MU and TT definition for REFSENS FR2 CA test cases |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211923 |
0485 |
1 |
F |
Update FR2 MU and TT in 38.521-2 |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211924 |
0490 |
1 |
F |
CR to 38.521-2 on PC1 Measurement Grid MUs |
16.7.0 |
|
2021-03 |
RAN#91 |
R5-211925 |
0492 |
1 |
F |
Update of ETC MTSU |
16.7.0 |
|
2021-06 |
RAN#92 |
R5-212225 |
0496 |
– |
F |
Configured transmitter power for UL power boosting |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212226 |
0497 |
– |
F |
In-band emissions for UL power boosting |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212227 |
0498 |
– |
F |
Output power dynamics for CA |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212229 |
0500 |
– |
F |
Occupied bandwidth for CA |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212230 |
0501 |
– |
F |
Spectrum emission mask for CA |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212231 |
0502 |
– |
F |
Adjacent channel leakage ratio for CA |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212233 |
0504 |
– |
F |
Spurious emission band UE co-existence for CA |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212341 |
0505 |
– |
F |
FR2 MPR – Test configuration correction |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212342 |
0506 |
– |
F |
Removal of requirement for EIRP measurement in the transmitter spurious emission test cases |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212343 |
0507 |
– |
F |
Test limits update for MOP spherical coverage test case 6.2.1.2 |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212351 |
0508 |
– |
F |
ACS and IBB – FR2 MU definition in 38.521-2 |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212523 |
0510 |
– |
F |
Update of the test configuration for 6.5D.1 Occupied Bandwidth for UL MIMO test case |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212814 |
0515 |
– |
F |
Updated CA NS 201 202 203 for additional spurious emission |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212815 |
0516 |
– |
F |
Align CA spurious emission UE coex requirements with core spec |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212829 |
0519 |
– |
F |
Correction of 7.6 for test of blocking characteristics |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212858 |
0521 |
– |
F |
Removal of brackets for the Configured transmitted power requirements |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212859 |
0522 |
– |
F |
Removal of test cases in 6.3A.2 |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212861 |
0524 |
– |
F |
Correction of definition for bit 1 of modifiedMPRbehavior field of n28 |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-212975 |
0531 |
– |
F |
Updating H.2.2 for NR SA FR2 testing |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213309 |
0545 |
– |
F |
Update of output power dynamic test cases |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213319 |
0546 |
– |
F |
Update of Spectrum Emission Mask for UL MIMO test case |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213325 |
0549 |
– |
F |
Editorial Correction to FR2 frequency sub-group definitions |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213329 |
0552 |
– |
F |
EIS Requirements update for Rel.16 Inter-band CA |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213333 |
0555 |
– |
F |
Align MBR requirements table with current core spec |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213836 |
0511 |
1 |
F |
Correction of power control in 38.521-2 |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213837 |
0540 |
1 |
F |
FR2 Carrier Aggregation Minimum Output power updates |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213838 |
0548 |
1 |
F |
Implementation of PCC Prio test procedure updates in UL-CA tests |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213839 |
0535 |
1 |
F |
CR to 38.521-2 on Optional 4×2 PC3 Antenna Array Configuration |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213840 |
0536 |
1 |
F |
CR to 38.521-2 on larger quiet zone with grey-box approach |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213841 |
0537 |
1 |
F |
CR to 38.521-2 to clarify BP Searches for NTC and ETC |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213842 |
0539 |
1 |
F |
Measurement uncertainties and test tolerances for FR2 Relative and aggregate power tolerance |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213895 |
0509 |
1 |
F |
Update of the test configuration for 6.4A.2.1 EVM CA test cases |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213896 |
0514 |
1 |
F |
Update to FR2 test case title in clause 6 |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213897 |
0518 |
1 |
F |
Correction of 6.2.3 for mapping of network signalling label |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213898 |
0523 |
1 |
F |
Correction of Test applicability of 6.4.2.5 |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213899 |
0526 |
1 |
F |
Correction of subclause titles with appropriate styles |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213900 |
0529 |
1 |
F |
Editorial correction of AMPR and Additional spurious emission |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213901 |
0530 |
1 |
F |
Clean up of CA sub-titles |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213902 |
0541 |
1 |
F |
Clarifications on UE beamlock function applicability |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213903 |
0538 |
1 |
F |
CR to 38.521-2 on Temperature Tolerance for FR2 Testing |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213904 |
0542 |
1 |
F |
Annex C: Clarifications to downlink signal levels |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-213984 |
0550 |
1 |
F |
Add n259 definition in common section |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-214011 |
0495 |
1 |
F |
Introduction of FR2 DL 256QAM to Maximum input level for CA |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-214028 |
0503 |
1 |
F |
Spurious emissions for CA |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-214029 |
0551 |
1 |
F |
Update with Rel16 Beam Correspondence requirements |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-214048 |
0512 |
1 |
F |
Correction of ON OFF time mask in 38.521-2 |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-214049 |
0525 |
1 |
F |
Removal of for further study notes about ETC testing |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-214050 |
0554 |
1 |
F |
Addition of missing clauses for SA FR2 UL-CA scenarios |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-214051 |
0534 |
1 |
F |
Measurement Uncertainties updates for FR2 Extreme Testing Conditions |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-214078 |
0517 |
1 |
F |
Updated spurious emission CA test configuration table |
16.8.0 |
|
2021-06 |
RAN#92 |
R5-214104 |
0499 |
1 |
F |
Transmit signal quality for CA |
16.8.0 |
|
2021-09 |
RAN#93 |
R5-214605 |
0572 |
– |
F |
Removal of empty cells in the test configuration table |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-214606 |
0573 |
– |
F |
Removal of brackets from the Minimum Conformance Requirements of Reference sensitivity power level for Intra-band non-contiguous CA |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-214608 |
0575 |
– |
F |
Move the definition of cumulative aggregated channel bandwidth to the Definitions section |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-214910 |
0582 |
– |
F |
Editorial correction to Reference sensitivity power level for Inter-band CA |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-214914 |
0586 |
– |
F |
Transmit ON/OFF time mask test configuration for non-contiguous CA |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-214915 |
0587 |
– |
F |
Frequency error for non-contiguous CA |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215056 |
0590 |
– |
F |
Update to time mask for FR2 UL-MIMO |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215329 |
0598 |
– |
F |
Correction to MU and TT for spurious emission band UE co-existence |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215473 |
0605 |
– |
F |
Clarification of PCC for FR2 DL CA |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215474 |
0606 |
– |
F |
Correction of common UL configuration |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215517 |
0609 |
– |
F |
Minor correction on UL additional reference channels parameters for TDD 60kHz SCS |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215583 |
0618 |
– |
F |
MTSU and TT mapping related to Max Device Size |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215584 |
0619 |
– |
F |
MTSU and TT mapping related to Max Device Size |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215585 |
0620 |
– |
F |
MTSU and TT mapping related to Max Device Size |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215618 |
0622 |
– |
F |
EIS spherical coverage for inter-band CA |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215636 |
0628 |
– |
F |
Updates to CSI-RS based beam correspondence minimum requirements |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215637 |
0629 |
– |
F |
Updates to SSB based beam correspondence minimum requirements |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215641 |
0630 |
– |
F |
Text correction to section clarifying leverage from NSA test coverage |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215830 |
0612 |
1 |
F |
FR2 SA UL MIMO measurement uncertainties and test tolerances updates |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215831 |
0614 |
1 |
F |
Editorial correction for Receiver Spurious Emissions Measurement Uncertainty |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215848 |
0558 |
1 |
F |
Introduction of new clause 6.3A.4.4 and Minimum conformance requirements |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215849 |
0565 |
1 |
F |
Introduction of new TC 6.3A.4.4.1 Aggregate power tolerance for CA (2UL CA) |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215850 |
0566 |
1 |
F |
Introduction of new TC 6.3A.4.4.2 Aggregate power tolerance for CA (3UL CA) |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215851 |
0567 |
1 |
F |
Introduction of new TC 6.3A.4.4.3 Aggregate power tolerance for CA (4UL CA) |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215852 |
0568 |
1 |
F |
Introduction of new TC 6.3A.4.4.4 Aggregate power tolerance for CA (5UL CA) |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215853 |
0569 |
1 |
F |
Introduction of new TC 6.3A.4.4.5 Aggregate power tolerance for CA (6UL CA) |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215854 |
0570 |
1 |
F |
Introduction of new TC 6.3A.4.4.6 Aggregate power tolerance for CA (7UL CA) |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215855 |
0571 |
1 |
F |
Introduction of new TC 6.3A.4.4.7 Aggregate power tolerance for CA (8UL CA) |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215856 |
0580 |
1 |
F |
Addition of new test case 6.4D.1 Frequency error for UL MIMO in FR2 |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215857 |
0581 |
1 |
F |
Update of test case 6.4D.3 Time alignment error for UL MIMO in FR2 |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215858 |
0591 |
1 |
F |
Cleaning up the specification skeleton |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215859 |
0593 |
1 |
F |
Editorial corrections for various test cases |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215860 |
0595 |
1 |
F |
Correction of FR2 Carrier Leakage Test Case |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215861 |
0599 |
1 |
F |
Editors note correction to reference sensitivity for CA |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215862 |
0589 |
1 |
F |
Update of FR2 UL RMCs |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215925 |
0603 |
1 |
F |
Correct the abbreviations for network signalling value in 38.521-2 |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215975 |
0588 |
1 |
F |
Transmit modulation quality for non-contiguous CA |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215976 |
0576 |
1 |
F |
Update Minimum conformance requirement clause 7.4A.0 for Rel-16 Enhancement |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215977 |
0577 |
1 |
F |
Addition of clause 7.5A.0 minimum conformance requirement for Rel-16 Enhancement WP |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215978 |
0578 |
1 |
F |
Addition of clause 7.6A.2.0 minimum conformance requirement for Rel-16 Enhancement WP |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215979 |
0623 |
1 |
F |
DL CA BW Enhancement and CA REFSENS |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-215980 |
0627 |
1 |
F |
Common clause updates to cover Rel.16 FR2 changes |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-216036 |
0611 |
1 |
F |
FR2 SA UL MIMO Out-of-band emissions initial conditions updates |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-216037 |
0613 |
1 |
F |
FR2 SA UL MIMO Maximum Power Reduction update |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-216063 |
0602 |
1 |
F |
Update of 5.5A.1 for intra-band contiguous CA configuration table |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-216081 |
0626 |
1 |
F |
Updates to Rel.16 enhanced Beam Correspondence test |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-216087 |
0556 |
1 |
F |
Update to FR2 minimum output power test case |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-216088 |
0557 |
1 |
F |
Update to FR2 ACLR test case |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-216089 |
0592 |
1 |
F |
Add missing LO retrieval step in ULCA carrier leakage test procedure |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-216090 |
0594 |
1 |
F |
FR2 Spur emissions test config table updates and editor notes clean up |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-216091 |
0596 |
1 |
F |
Correction of power control in 38.521-2 |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-216092 |
0625 |
1 |
F |
38.521-2 CR FR2 ETC MU & TT updates |
16.9.0 |
|
2021-09 |
RAN#93 |
R5-216111 |
0621 |
1 |
F |
UE maximum output power for UL-MIMO |
16.9.0 |
|
2021-12 |
RAN#94 |
R5-216546 |
0631 |
– |
F |
Addition of test configuration for FR2 DL 256QAM to Maximum input level |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217092 |
0636 |
– |
F |
Update Rx beam peak direction search |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217093 |
0637 |
– |
F |
Update of Reference Sensitivity Test Cases for CA |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217113 |
0638 |
– |
F |
FR2 Refsens correction for power class 2 |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217114 |
0639 |
– |
F |
FR2 EIS spherical coverage correction for power class 2 |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217248 |
0645 |
– |
F |
Correction of note for BEAM_SELECT_WAIT_TIME |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217249 |
0646 |
– |
F |
Correction of subclause style, number and position |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217250 |
0647 |
– |
F |
Correction of Table 6.2.2.4.1-9 for Test Frequency |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217331 |
0651 |
– |
F |
Correction to test requirements of 6.2D.2 MPR for UL-MIMO |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217333 |
0653 |
– |
F |
Removing 6.3D.3.4.5 SRS time mask for MIMO |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217341 |
0654 |
– |
F |
Correction of 3.2 and 3.3 for symbols and abbreviations |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217419 |
0658 |
– |
F |
Correction of test configuration table in 6.3.4.2 |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217420 |
0659 |
– |
F |
Correction of aggregate power tolerance |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217421 |
0660 |
– |
F |
Correction of core requirement of aggregate power tolerance |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217614 |
0665 |
– |
F |
Update to FR2 Tx test cases for n260 |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217708 |
0671 |
– |
F |
FR2 Extreme Temperature Conditions applicability for ACLR |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217709 |
0672 |
– |
F |
Minimum Output Power Editor notes review |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-217710 |
0673 |
– |
F |
38.521-2 FR2 Extreme Temperature Conditions applicability for UL-MIMO |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218234 |
0644 |
1 |
F |
Correction of exception of message contents for DFT-s-OFDM modulation |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218235 |
0650 |
1 |
F |
Global correction of test cases except those having impact on ETSI EN 301 908 25 |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218236 |
0652 |
1 |
F |
Correction to testability statement of 6.5.2.3 ACLR |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218237 |
0656 |
1 |
F |
Correction of 6.2.4 for configured transmitted power |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218238 |
0664 |
1 |
F |
Correction to FR2 Rx test cases |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218239 |
0669 |
1 |
F |
Clarification on reference sensitivity power level |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218240 |
0635 |
1 |
F |
Handling of fallbacks for FR2 CA |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218241 |
0655 |
1 |
F |
Correction of 4.1 and 4.2 for minimum requirements and test requirements |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218366 |
0678 |
1 |
F |
Updates to CSI-RS based beam correspondence minimum requirements |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218367 |
0679 |
1 |
F |
Updates to SSB based beam correspondence minimum requirements |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218368 |
0633 |
1 |
F |
MTSUs for Rel-16 RF Enhancement for FR2 |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218369 |
0634 |
1 |
F |
TTs for Rel-16 RF Enhancement for FR2 |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218401 |
0662 |
1 |
F |
Update of transmit modulation quality test cases |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218407 |
0670 |
1 |
F |
38.521-2 Beam correspondence Measurement Uncertainties |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218425 |
0640 |
1 |
F |
Spur emissions coex test config update and editor notes clean up |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218426 |
0641 |
1 |
F |
Clarify DL CC config for UL CA test |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218427 |
0642 |
1 |
F |
Update Minimum Output Power requirement |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218428 |
0643 |
1 |
F |
Alignment of the description for initial set up of downlink and uplink signals |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218429 |
0648 |
1 |
F |
Correction of test cases having impact on ETSI EN 301 908 25 |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218430 |
0649 |
1 |
F |
Correction of test configuration for CA test cases |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218431 |
0667 |
1 |
F |
Update of test case 6.2.3 A-MPR |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218432 |
0668 |
1 |
F |
Update of test case 6.5.3.3 A-Spurious |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218474 |
0676 |
1 |
F |
Enhanced Beam Correspondence test updates |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218475 |
0677 |
1 |
F |
Common clause updates to cover Rel.16 FR2 changes |
16.10.0 |
|
2021-12 |
RAN#94 |
R5-218484 |
0675 |
1 |
F |
Rel.15 Beam Correspondence Updates and clarifications |
16.10.0 |
|
2022-03 |
RAN#95 |
R5-220256 |
0684 |
– |
F |
FR2 Frequency error tests – unify requirements per polarization |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-220257 |
0685 |
– |
F |
Test limit correction in FR2 MPR test case |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-220258 |
0686 |
– |
F |
RX beam peak direction search procedure update in case of intra-band DL CA |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-220259 |
0687 |
– |
F |
Updated reference to FR2 connection diagram in tests using modulated interferer |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-220274 |
0688 |
– |
F |
Clarifications on 5G NR connectivity options for RF FR2 |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-220791 |
0693 |
– |
F |
Update to 6.2D.1 for ULFPTx |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-220792 |
0694 |
– |
F |
Update to 6.2D.2 for ULFPTx |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-220793 |
0695 |
– |
F |
Update to 6.2D.4 for ULFPTx |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-220908 |
0698 |
– |
F |
Correction to test procedure of 6.4A.1.1 |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221060 |
0699 |
– |
F |
Update of 6.2A.1 for UE maximum output power |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221061 |
0700 |
– |
F |
Update of 6.2.3 for UE maximum output power with additional requirements |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221063 |
0702 |
– |
F |
Update of 6.2A.4 for configured transmitted power for CA |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221111 |
0704 |
– |
F |
Editorial correction to titles of FR2 test cases |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221112 |
0705 |
– |
F |
Update to test applicability to FR2 test cases |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221269 |
0706 |
– |
F |
Correction of ON OFF time mask test cases for FR2 |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221334 |
0709 |
– |
F |
Removing TP analysis editor note for FR2 Tx spur emission UL MIMO test case |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221338 |
0710 |
– |
F |
Update to Clause 7.6 Blocking Characteristics |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221341 |
0712 |
– |
F |
Update to Intra-band non-contiguous CA |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221354 |
0716 |
– |
F |
Update reference to intra-band non-contiguous UL-CA FR2 RF tests in Annex |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221355 |
0717 |
– |
F |
Editorial correction in intra-band non-contiguous configurations table |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221356 |
0718 |
– |
F |
Add correct test case structure to Beam Correspondence CA test case |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221357 |
0719 |
– |
F |
Introduce EIS test cases to incorporate Rel.16 inter-band CA |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221657 |
0707 |
2 |
F |
38.521-2 Beam correspondence Measurement Uncertainties and test tolerances |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221685 |
0683 |
1 |
F |
Correction of test config tables of non-CA test cases for consistency with CA test cases on without RB allocation case |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221686 |
0689 |
1 |
F |
FR2 SA EVM test case update based on MU and TT analysis |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221687 |
0696 |
1 |
F |
Correction of general ON OFF time mask |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221688 |
0697 |
1 |
F |
Correction to FR2 absolute power tolerance MU and TT |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221689 |
0681 |
1 |
F |
Removal of empty lines in Table 7.3.2.3.2-1 and Table 7.3.2.5-2 |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221690 |
0703 |
1 |
F |
Correction to PDCCH DCI format for FR2 test cases |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221691 |
0711 |
1 |
F |
Update to Clause 7.5 Adjacent channel selectivity |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221692 |
0682 |
1 |
F |
Correction of the table title style of Table 5.5A.3-1 |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221766 |
0701 |
1 |
F |
Update of 6.2A.2 for UE maximum output power reduction for CA |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221792 |
0708 |
1 |
F |
ETC for FR2 RF CA |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221889 |
0714 |
1 |
F |
FR2 Enhanced Beam Correspondence test updates |
16.11.0 |
|
2022-03 |
RAN#95 |
R5-221890 |
0715 |
1 |
F |
Minimum Conformance Requirements updates to enhanced beam correspondence |
16.11.0 |
|
2022-06 |
RAN#96 |
R5-222198 |
0720 |
– |
F |
Correction of table numbers in 6.2D.2.5 |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-222199 |
0721 |
– |
F |
Correction of Test Environment for UL MIMO MPR test case |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-222342 |
0723 |
– |
F |
Beam peak search – re-positioning formula correction |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-222488 |
0731 |
– |
F |
Editorial correction for Tx test cases |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-222544 |
0733 |
– |
F |
Update of A-MPR and A-SE test cases |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-222879 |
0736 |
– |
F |
Update to FR2 6.2.3 A-MPR |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223122 |
0749 |
– |
F |
Addition of FR2 6.2D.3 for ULFPTx |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223258 |
0752 |
– |
F |
Correction of FR2 MOP and beam correspondence test cases |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223617 |
0728 |
1 |
F |
Update FR2 TRx MU in 38.521-2 |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223749 |
0726 |
1 |
F |
Common Uplink Configuration updates for NR RF requirement enhancements for FR2 |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223750 |
0740 |
1 |
F |
FR2 Enhanced Beam Correspondence test updates |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223751 |
0742 |
1 |
F |
Updates across Spherical Coverage test cases to incorporate Rel.16 requirements |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223752 |
0748 |
1 |
F |
Test case updates in Max Input Level FR2 CA tests |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223814 |
0724 |
1 |
F |
Rel-15 MPR updates |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223815 |
0725 |
1 |
F |
Common Uplink Configuration updates for Rel-15 FR2 |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223816 |
0732 |
1 |
F |
Correction to DCI format in signal quality TCs |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223817 |
0739 |
1 |
F |
Implement test function approach to limit Pcell Power in FR2 UL-CA tests |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223818 |
0750 |
1 |
F |
Correction to 6.2.1.1 for multi-band relaxation factors for PC3 UE |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223819 |
0755 |
1 |
F |
Clarification on Configured transmitted power |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223820 |
0757 |
1 |
F |
Implementation of FR2 single carrier Tx beam peak applicability for UL MIMO Tx tests |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223821 |
0761 |
1 |
F |
Editorial correction to test requirement of FR2 test cases |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223822 |
0754 |
1 |
F |
Clarification on Adjacent channel selectivity |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223823 |
0758 |
1 |
F |
Clarification on In-band blocking |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223824 |
0730 |
1 |
F |
Editorial correction in Annex |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223825 |
0734 |
1 |
F |
Correction of TRP Measurement Grids |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223826 |
0735 |
1 |
F |
CR on applicability per permitted test method |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223827 |
0743 |
1 |
F |
Correction to FR2 DL RMCs |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223828 |
0744 |
1 |
F |
Initial introduction of fast spherical coverage test method |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223829 |
0745 |
1 |
F |
Initial introduction of RSRP-B based Rx Peak Beam Search |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223830 |
0746 |
1 |
F |
Initial introduction of Enhanced EIRP measurement method |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223831 |
0751 |
1 |
F |
Correction to A.2.3 and A.3.3 for UL and DL RMCs |
16.12.0 |
|
2022-06 |
RAN#96 |
R5-223832 |
0760 |
1 |
F |
Clarification on UE Channel bandwidth per operating band for CA |
16.12.0 |
|
2022-09 |
RAN#97 |
R5-224247 |
0772 |
– |
F |
Correction of the SCS value in Table 5.3.5-1 for n259 |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-224248 |
0773 |
– |
F |
Correction of the clause numbers and table numbers in 7.3A.3 |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-224303 |
0775 |
– |
F |
PUCCH format correction to test DFT-s-OFDM in FR2 |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-224305 |
0777 |
– |
F |
FR2 SA EVM test case update based on TT analysis |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-224907 |
0787 |
– |
F |
Reference sensitivity power level for CA, editor notes update on ETC |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225107 |
0794 |
– |
F |
Update of spurious emissions test cases |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225205 |
0797 |
– |
F |
CR to update validation test frequencies and sub-ranges |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225607 |
0798 |
1 |
F |
Addition of new test case 6.2.2_1 for FR2 MPR enhancements |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225658 |
0762 |
1 |
F |
New test case addition: 6.2.4_1 Configured transmitted power with Power Boost |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225659 |
0765 |
1 |
F |
Enhanced Beam correspondence Measurement Uncertainties and test tolerances |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225660 |
0764 |
1 |
F |
Measurement uncertainties and test tolerances for test case 6.2.4_1 Configured transmitted power with Power Boost |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225664 |
0776 |
1 |
F |
PC1 – MU and TT definition for MOP in 38.521-2 |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225665 |
0778 |
1 |
F |
PC1 – MU and TT definition for REFSENS in 38.521-2 |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225666 |
0767 |
1 |
F |
Updates to Spherical Coverage annexes |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225667 |
0780 |
1 |
F |
Definition of PC1 MU and relaxation |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225679 |
0779 |
1 |
F |
Update of FR2 5 to 8UL CA Test Cases |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225680 |
0766 |
1 |
F |
Updates related to TPMI test methods |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225719 |
0774 |
1 |
F |
Applicable NR-ARFCN correction for n259 |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225743 |
0763 |
1 |
F |
In-band emissions minimum conformance requirements update |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225744 |
0786 |
1 |
F |
Reference sensitivity power level for CA, update on intra-band non-continuous CA |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225771 |
0788 |
1 |
F |
HST FR2 6.2.3 UE maximum output power with additional requirements |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225772 |
0789 |
1 |
F |
HST FR2 6.2D.1.1 adding Release-17 FR2 PC6 UE maximum output power for UL MIMO |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225773 |
0790 |
1 |
F |
HST FR2 6.3.1 adding Release-17 FR2 PC6 Minimum output power |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225774 |
0791 |
1 |
F |
HST FR2 6.4.2.2 adding Release-17 FR2 PC6 Carrier leakage |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225775 |
0792 |
1 |
F |
HST FR2 6.4.2.3 adding Release-17 FR2 PC6 In-band emissions |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225792 |
0768 |
1 |
F |
Tx Fast Spherical Coverage test cases integration |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225793 |
0771 |
1 |
F |
FR2 Tx Signal Quality UL MIMO Test Case Updates |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225794 |
0795 |
1 |
F |
Correction of spurious emissions test case |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225795 |
0800 |
1 |
F |
Updated Test points in FR2 CA MPR test case |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225796 |
0769 |
1 |
F |
Rx Fast Spherical Coverage test cases integration |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225797 |
0785 |
1 |
F |
Correction to interfere offset in 7.6.2 |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225798 |
0770 |
1 |
F |
Annex updates related to RSRP-B Rx Beam peak search |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225843 |
0796 |
1 |
F |
Update to FR2 CA MPR test case 6.2A.2.1 to prevent SCell drop by using UE PHR |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225844 |
0799 |
1 |
F |
Extension of test function approach to limit Pcell Power in some FR2 UL CA tests |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225845 |
0784 |
1 |
F |
Correction to test procedure of minimum output power |
16.13.0 |
|
2022-09 |
RAN#97 |
R5-225870 |
0782 |
1 |
F |
Correction to EVM measurement point for DFTs-OFDM DM-RS Type 2 |
16.13.0 |