A.2 UL reference measurement channels
38.521-23GPPNRPart 2: Range 2 StandaloneRadio transmission and receptionRelease 17TSUser Equipment (UE) conformance specification
A.2.1 General
TBD
A.2.2 Void
A.2.3 Reference measurement channels for TDD
For UL RMCs defined below, TDD slot pattern defined in Table A.2.3-1 will be used for the requirements requiring at least one sub frame (1ms) for the measurement period. For other requirements, TDD slot patterns defined for reference sensitivity tests in Table A.3.3.1-1 will be used.
Table A.2.3-1: Additional reference channels parameters for TDD
|
Parameter |
Value |
||
|
SCS 60 kHz (µ=2) |
SCS 120 kHz (µ=3) |
||
|
TDD Slot Configuration pattern (Note 1) |
DDDSUUUU |
7DS8U |
|
|
Special Slot Configuration (Note 2) |
S=4D+6G+4U |
S=12D+2G |
|
|
UL-DL configuration |
referenceSubcarrierSpacing |
60 kHz |
120 kHz |
|
dl-UL-TransmissionPeriodicity |
2 ms |
2 ms |
|
|
nrofDownlinkSlots |
3 |
7 |
|
|
nrofDownlinkSymbols |
4 |
12 |
|
|
nrofUplinkSlot |
4 |
8 |
|
|
nrofUplinkSymbols |
4 |
0 |
|
|
UL slot numbers |
mod(slot index, 40) = {36,…,39} |
mod(slot index, 80) = {72,…,79} |
|
|
NOTE 1: D denotes a slot with all DL symbols; S denotes a slot with a mix of DL, UL and guard symbols; U denotes a slot with all UL symbols. The field is for information. NOTE 2: D, G, U denote DL, guard and UL symbols, respectively. The field is for information. |
|||
A.2.3.1 DFT-s-OFDM Pi/2-BPSK
Table A.2.3.1-1: Reference Channels for DFT-s-OFDM pi/2-BPSK
|
Parameter |
Allocated resource blocks (LCRB) |
DFT-s-OFDM Symbols per slot (Note 1) |
Modulation |
MCS Index (Note 2) |
Payload size |
Transport block CRC |
LDPC Base Graph |
Number of code blocks per slot (Note 3) |
Total number of bits per slot |
Total modulated symbols per slot |
|
Unit |
|
|
|
|
Bits |
Bits |
|
|
Bits |
|
|
|
1 |
11 |
pi/2 BPSK |
0 |
24 |
16 |
2 |
1 |
132 |
132 |
|
|
16 |
11 |
pi/2 BPSK |
0 |
504 |
16 |
2 |
1 |
2112 |
2112 |
|
|
32 |
11 |
pi/2 BPSK |
0 |
1032 |
16 |
2 |
1 |
4224 |
4224 |
|
|
64 |
11 |
pi/2 BPSK |
0 |
2024 |
16 |
2 |
1 |
8448 |
8448 |
|
|
128 |
11 |
pi/2 BPSK |
0 |
3976 |
24 |
2 |
2 |
16896 |
16896 |
|
|
256 |
11 |
pi/2 BPSK |
0 |
7944 |
24 |
2 |
3 |
33792 |
33792 |
|
NOTE 1: PUSCH mapping Type-A and single-symbol DM-RS configuration Type-1 with 2 additional DM-RS symbols, such that the DM-RS positions are set to symbols 2, 7, 11. DMRS is [TDM’ed] with PUSCH data. DM-RS symbols are not counted. NOTE 2: MCS Index is based on MCS table 6.1.4.1-1 defined in 38.214. NOTE 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) NOTE 4: Indexes of active UL slots are given by Table A.2.3-1 with TDD UL-DL configuration specified in A2.3 for the requirements requiring at least one sub frame (1ms) for the measurement period. For other requirements, indexes of active UL slots are given by the slots satisfying mod(slot index+1, 5) = 0 with TDD UL-DL configuration specified in A.3.3.1. NOTE 5: The RMCs apply to all channel bandwidth where LCRB ≤ NRB. |
||||||||||
Table A.2.3.1-2: Void
A.2.3.2 DFT-s-OFDM QPSK
Table A.2.3.2-1: Reference Channels for DFT-s-OFDM QPSK
|
Parameter |
Allocated resource blocks (LCRB) |
DFT-s-OFDM Symbols per slot (Note 1) |
Modulation |
MCS Index (Note 2) |
Payload size |
Transport block CRC |
LDPC Base Graph |
Number of code blocks per slot (Note 3) |
Total number of bits per slot |
Total modulated symbols per slot |
|
Unit |
|
|
|
|
Bits |
Bits |
|
|
Bits |
|
|
|
1 |
11 |
QPSK |
2 |
48 |
16 |
2 |
1 |
264 |
132 |
|
|
16 |
11 |
QPSK |
2 |
808 |
16 |
2 |
1 |
4224 |
2112 |
|
|
20 |
11 |
QPSK |
2 |
1032 |
16 |
2 |
1 |
5280 |
2640 |
|
|
32 |
11 |
QPSK |
2 |
1608 |
16 |
2 |
1 |
8448 |
4224 |
|
|
64 |
11 |
QPSK |
2 |
3240 |
16 |
2 |
1 |
16896 |
8448 |
|
|
128 |
11 |
QPSK |
2 |
6408 |
24 |
2 |
2 |
33792 |
16896 |
|
|
256 |
11 |
QPSK |
2 |
12808 |
24 |
2 |
4 |
67584 |
33792 |
|
NOTE 1: PUSCH mapping Type-A and single-symbol DM-RS configuration Type-1 with 2 additional DM-RS symbols, such that the DM-RS positions are set to symbols 2, 7, 11. DMRS is [TDM’ed] with PUSCH data. DM-RS symbols are not counted. NOTE 2: MCS Index is based on MCS table 6.1.4.1-1 defined in 38.214. NOTE 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) NOTE 4: Indexes of active UL slots are given by Table A.2.3-1 with TDD UL-DL configuration specified in A2.3 for the requirements requiring at least one sub frame (1ms) for the measurement period. For other requirements, indexes of active UL slots are given by the slots satisfying mod(slot index+1, 5) = 0 with TDD UL-DL configuration specified in A.3.3.1. NOTE 5: The RMCs apply to all channel bandwidth where LCRB ≤ NRB. |
||||||||||
Table A.2.3.2-2: Void
A.2.3.3 DFT-s-OFDM 16QAM
Table A.2.3.3-1: Reference Channels for DFT-s-OFDM 16QAM
|
Parameter |
Allocated resource blocks (LCRB) |
DFT-s-OFDM Symbols per slot (Note 1) |
Modulation |
MCS Index (Note 2) |
Payload size |
Transport block CRC |
LDPC Base Graph |
Number of code blocks per slot (Note 3) |
Total number of bits per slot |
Total modulated symbols per slot |
|
Unit |
|
|
|
|
Bits |
Bits |
|
|
Bits |
|
|
|
1 |
11 |
16QAM |
10 |
176 |
16 |
2 |
1 |
528 |
132 |
|
|
16 |
11 |
16QAM |
10 |
2792 |
16 |
2 |
1 |
8448 |
2112 |
|
|
32 |
11 |
16QAM |
10 |
5632 |
24 |
1 |
1 |
16896 |
4224 |
|
|
64 |
11 |
16QAM |
10 |
11272 |
24 |
1 |
2 |
33792 |
8448 |
|
|
128 |
11 |
16QAM |
10 |
22536 |
24 |
1 |
3 |
67584 |
16896 |
|
|
256 |
11 |
16QAM |
10 |
45096 |
24 |
1 |
6 |
135168 |
33792 |
|
NOTE 1: PUSCH mapping Type-A and single-symbol DM-RS configuration Type-1 with 2 additional DM-RS symbols, such that the DM-RS positions are set to symbols 2, 7, 11. DMRS is [TDM’ed] with PUSCH data. DM-RS symbols are not counted. NOTE 2: MCS Index is based on MCS table 6.1.4.1-1 defined in 38.214. NOTE 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) NOTE 4: Indexes of active UL slots are given by Table A.2.3-1 with TDD UL-DL configuration specified in A2.3 for the requirements requiring at least one sub frame (1ms) for the measurement period. For other requirements, indexes of active UL slots are given by the slots satisfying mod(slot index+1, 5) = 0 with TDD UL-DL configuration specified in A.3.3.1. NOTE 5: The RMCs apply to all channel bandwidth where LCRB ≤ NRB. |
||||||||||
Table A.2.3.3-2: Void
A.2.3.4 DFT-s-OFDM 64QAM
Table A.2.3.4-1: Reference Channels for DFT-s-OFDM 64QAM
|
Parameter |
Allocated resource blocks (LCRB) |
DFT-s-OFDM Symbols per slot (Note 1) |
Modulation |
MCS Index (Note 2) |
Payload size |
Transport block CRC |
LDPC Base Graph |
Number of code blocks per slot (Note 3) |
Total number of bits per slot |
Total modulated symbols per slot |
|
Unit |
|
|
|
|
Bits |
Bits |
|
|
Bits |
|
|
|
1 |
11 |
64QAM |
18 |
408 |
16 |
2 |
1 |
792 |
132 |
|
|
16 |
11 |
64QAM |
18 |
6400 |
24 |
1 |
1 |
12672 |
2112 |
|
|
32 |
11 |
64QAM |
18 |
12808 |
24 |
1 |
2 |
25344 |
4224 |
|
|
64 |
11 |
64QAM |
18 |
25608 |
24 |
1 |
4 |
50688 |
8448 |
|
|
128 |
11 |
64QAM |
18 |
51216 |
24 |
1 |
7 |
101376 |
16896 |
|
|
256 |
11 |
64QAM |
18 |
102416 |
24 |
1 |
13 |
202752 |
33792 |
|
NOTE 1: PUSCH mapping Type-A and single-symbol DM-RS configuration Type-1 with 2 additional DM-RS symbols, such that the DM-RS positions are set to symbols 2, 7, 11. DMRS is [TDM’ed] with PUSCH data. DM-RS symbols are not counted. NOTE 2: MCS Index is based on MCS table 6.1.4.1-1 defined in 38.214. NOTE 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) NOTE 4: Indexes of active UL slots are given by Table A.2.3-1 with TDD UL-DL configuration specified in A2.3 for the requirements requiring at least one sub frame (1ms) for the measurement period. For other requirements, indexes of active UL slots are given by the slots satisfying mod(slot index+1, 5) = 0 with TDD UL-DL configuration specified in A.3.3.1. NOTE 5: The RMCs apply to all channel bandwidth where LCRB ≤ NRB. |
||||||||||
Table A.2.3.4-2: Void
A.2.3.5 CP-OFDM QPSK
Table A.2.3.5-1: Reference Channels for CP-OFDM QPSK
|
Parameter |
Allocated resource blocks (LCRB) |
DFT-s-OFDM Symbols per slot (Note 1) |
Modulation |
MCS Index (Note 2) |
Payload size |
Transport block CRC |
LDPC Base Graph |
Number of code blocks per slot (Note 3) |
Total number of bits per slot |
Total modulated symbols per slot |
|
Unit |
|
|
|
|
Bits |
Bits |
|
|
Bits |
|
|
|
1 |
11 |
QPSK |
2 |
48 |
16 |
2 |
1 |
264 |
132 |
|
|
16 |
11 |
QPSK |
2 |
808 |
16 |
2 |
1 |
4224 |
2112 |
|
|
32 |
11 |
QPSK |
2 |
1608 |
16 |
2 |
1 |
8448 |
4224 |
|
|
33 |
11 |
QPSK |
2 |
1672 |
16 |
2 |
1 |
8712 |
4356 |
|
|
66 |
11 |
QPSK |
2 |
3368 |
16 |
2 |
1 |
17424 |
8712 |
|
|
132 |
11 |
QPSK |
2 |
6536 |
24 |
2 |
2 |
34848 |
17424 |
|
264 |
11 |
QPSK |
2 |
13064 |
24 |
2 |
4 |
69696 |
34848 |
|
|
NOTE 1: PUSCH mapping Type-A and single-symbol DM-RS configuration Type-1 with 2 additional DM-RS symbols, such that the DM-RS positions are set to symbols 2, 7, 11. DMRS is [TDM’ed] with PUSCH data. DM-RS symbols are not counted. NOTE 2: MCS Index is based on MCS table 5.1.3.1-1 defined in 38.214. NOTE 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) NOTE 4: Indexes of active UL slots are given by Table A.2.3-1 with TDD UL-DL configuration specified in A2.3 for the requirements requiring at least one sub frame (1ms) for the measurement period. For other requirements, indexes of active UL slots are given by the slots satisfying mod(slot index+1, 5) = 0 with TDD UL-DL configuration specified in A.3.3.1. NOTE 5: The RMCs apply to all channel bandwidth where LCRB ≤ NRB. |
||||||||||
Table A.2.3.5-2: Void
A.2.3.6 CP-OFDM 16QAM
Table A.2.3.6-1: Reference Channels for CP-OFDM 16QAM
|
Parameter |
Allocated resource blocks (LCRB) |
DFT-s-OFDM Symbols per slot (Note 1) |
Modulation |
MCS Index (Note 2) |
Payload size |
Transport block CRC |
LDPC Base Graph |
Number of code blocks per slot (Note 3) |
Total number of bits per slot |
Total modulated symbols per slot |
|
Unit |
|
|
|
|
Bits |
Bits |
|
|
Bits |
|
|
|
1 |
11 |
16QAM |
10 |
176 |
16 |
2 |
1 |
528 |
132 |
|
|
16 |
11 |
16QAM |
10 |
2792 |
16 |
2 |
1 |
8448 |
2112 |
|
|
32 |
11 |
16QAM |
10 |
5632 |
24 |
1 |
1 |
16896 |
4224 |
|
|
33 |
11 |
16QAM |
10 |
5760 |
24 |
1 |
1 |
17424 |
4356 |
|
|
66 |
11 |
16QAM |
10 |
11528 |
24 |
1 |
2 |
34848 |
8712 |
|
|
132 |
11 |
16QAM |
10 |
23040 |
24 |
1 |
3 |
69696 |
17424 |
|
264 |
11 |
16QAM |
10 |
46104 |
24 |
1 |
6 |
139392 |
34848 |
|
|
NOTE 1: PUSCH mapping Type-A and single-symbol DM-RS configuration Type-1 with 2 additional DM-RS symbols, such that the DM-RS positions are set to symbols 2, 7, 11. DMRS is [TDM’ed] with PUSCH data. DM-RS symbols are not counted. NOTE 2: MCS Index is based on MCS table 5.1.3.1-1 defined in 38.214. NOTE 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) NOTE 4: Indexes of active UL slots are given by Table A.2.3-1 with TDD UL-DL configuration specified in A2.3 for the requirements requiring at least one sub frame (1ms) for the measurement period. For other requirements, indexes of active UL slots are given by the slots satisfying mod(slot index+1, 5) = 0 with TDD UL-DL configuration specified in A.3.3.1. NOTE 5: The RMCs apply to all channel bandwidth where LCRB ≤ NRB. |
||||||||||
Table A.2.3.6-2: Void
A.2.3.7 CP-OFDM 64QAM
Table A.2.3.7-1: Reference Channels for CP-OFDM 64QAM
|
Parameter |
Allocated resource blocks (LCRB) |
DFT-s-OFDM Symbols per slot (Note 1) |
Modulation |
MCS Index (Note 2) |
Payload size |
Transport block CRC |
LDPC Base Graph |
Number of code blocks per slot (Note 3) |
Total number of bits per slot |
Total modulated symbols per slot |
|
Unit |
|
|
|
|
Bits |
Bits |
|
|
Bits |
|
|
|
1 |
11 |
64QAM |
19 |
408 |
16 |
2 |
1 |
792 |
132 |
|
|
16 |
11 |
64QAM |
19 |
6400 |
24 |
1 |
1 |
12672 |
2112 |
|
|
32 |
11 |
64QAM |
19 |
12808 |
24 |
1 |
2 |
25344 |
4224 |
|
|
33 |
11 |
64QAM |
19 |
13064 |
24 |
1 |
2 |
26136 |
4356 |
|
|
66 |
11 |
64QAM |
19 |
26120 |
24 |
1 |
4 |
52272 |
8712 |
|
|
132 |
11 |
64QAM |
19 |
53288 |
24 |
1 |
7 |
104544 |
17424 |
|
264 |
11 |
64QAM |
19 |
106576 |
24 |
1 |
13 |
209088 |
34848 |
|
|
NOTE 1: PUSCH mapping Type-A and single-symbol DM-RS configuration Type-1 with 2 additional DM-RS symbols, such that the DM-RS positions are set to symbols 2, 7, 11. DMRS is [TDM’ed] with PUSCH data. DM-RS symbols are not counted. NOTE 2: MCS Index is based on MCS table 5.1.3.1-1 defined in 38.214. NOTE 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) NOTE 4: Indexes of active UL slots are given by Table A.2.3-1 with TDD UL-DL configuration specified in A2.3 for the requirements requiring at least one sub frame (1ms) for the measurement period. For other requirements, indexes of active UL slots are given by the slots satisfying mod(slot index+1, 5) = 0 with TDD UL-DL configuration specified in A.3.3.1. NOTE 5: The RMCs apply to all channel bandwidth where LCRB ≤ NRB. |
||||||||||
Table A.2.3.7-2: Void