Foreword1 Scope2 References3 Definitions, symbols and abbreviations4 General5 Operating bands and channel arrangement6 Transmitter characteristics6.1 General6.2 Transmitter power6.2A Transmitter power for CA6.2D Transmitter power for UL MIMO6.3 Output power dynamics6.3.1 Minimum output power6.3.2 Transmit OFF power6.3.3 Transmit ON/OFF time mask6.3.4 Power control6.3A Output power dynamics for CA6.3D Output power dynamics for UL MIMO6.4 Transmit signal quality6.4A Transmit signal quality for CA6.4D Transmit signal quality for UL MIMO6.5 Output RF spectrum emissions6.5A Output RF spectrum emissions for CA6.5D Output RF spectrum emissions for UL MIMO6.6 Beam correspondence6.6A Beam correspondence for CA7 Receiver characteristicsA.1 GeneralA.2 UL reference measurement channelsA.3 DL reference measurement channelsC.1 GeneralC.2 SetupC.3 ConnectionD.1 GeneralD.2 Interference signalsE.1 GeneralE.2 EnvironmentalF.1 Measurement PointF.3 Basic in-band emissions measurementF.4 Modified signal under testF.5 Window lengthF.6 Averaged EVMF.7 Spectrum FlatnessF.8 Phase offset measurement for DMRS bundlingG.0 GeneralG.1 Measurement PointG.2 Relative Phase Error MeasurementH.1 Indication of modified MPR behaviorJ.1 Reference coordinate systemJ.2 Test conditions and angle definitionsJ.2 Test conditions and angle definitionsJ.3 DUT positioning guidelines A.1 General 38.101-23GPPNRPart 2: Range 2 StandaloneRelease 17TSUser Equipment (UE) radio transmission and reception Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM