6.3.1 Minimum output power
38.101-23GPPNRPart 2: Range 2 StandaloneRelease 17TSUser Equipment (UE) radio transmission and reception
6.3.1.0 General
The minimum controlled output power of the UE is defined as the EIRP in the channel bandwidth for all transmit bandwidth configurations (resource blocks) when the power is set to a minimum value.
The minimum output power is defined as the mean power in at least one sub frame (1ms).
6.3.1.1 Minimum output power for power class 1
For power class 1 UE, the minimum output power shall not exceed the values specified in Table 6.3.1.1-1 for each operating band supported. The minimum power is verified in beam locked mode with the test metric of EIRP (Link=TX beam peak direction, Meas=Link angle).
Table 6.3.1.1-1: Minimum output power for power class 1
|
Operating band |
Channel bandwidth (MHz) |
Minimum output power (dBm) |
Measurement bandwidth (MHz) |
|
n257, n258, n260, n261, n262 |
50 |
4 |
47.58 |
|
100 |
4 |
95.16 |
|
|
200 |
4 |
190.20 |
|
|
400 |
4 |
380.28 |
|
|
n263 |
100 |
4 |
95.16 |
|
400 |
4 |
381.12 |
|
|
800 |
4 |
715.20 |
|
|
1600 |
4 |
1429.44 |
|
|
2000 |
4 |
1705.92 |
6.3.1.2 Minimum output power for power class 2, 3, and 4
The minimum output power shall not exceed the values specified in Table 6.3.1.2-1 for each operating band supported. The minimum power is verified in beam locked mode with the test metric of EIRP (Link=TX beam peak direction, Meas=Link angle).
Table 6.3.1.2-1: Minimum output power for power class 2, 3, and 4
|
Operating band |
Channel bandwidth (MHz) |
Minimum output power (dBm) |
Measurement bandwidth (MHz) |
|
n257, n258, n259, n260, n261, n262 |
50 |
-13 |
47.58 |
|
100 |
-13 |
95.16 |
|
|
200 |
-13 |
190.20 |
|
|
400 |
-13 |
380.28 |
|
|
n263 |
100 |
-13 |
95.16 |
|
400 |
-13 |
381.12 |
|
|
800 |
-13 |
715.20 |
|
|
1600 |
-13 |
1429.44 |
|
|
2000 |
-13 |
1705.92 |
|
|
NOTE 1: n260 is not applied for power class 2. NOTE 2: n259 is not applied for power class 4. NOTE 3: power class 4 is not applicable to n263 |
|||
6.3.1.3 Minimum output power for power class 5 and 6
The minimum output power shall not exceed the values specified in Table 6.3.1.3-1 for each operating band supported. The minimum power is verified in beam locked mode with the test metric of EIRP (Link=TX beam peak direction, Meas=Link angle).
Table 6.3.1.3-1: Minimum output power for power class 5 and 6
|
Operating band |
Channel bandwidth (MHz) |
Minimum output power (dBm) |
Measurement bandwidth (MHz) |
|
n257, n258, n259, n261 |
50 |
-6 |
47.52 |
|
100 |
-6 |
95.04 |
|
|
200 |
-6 |
190.08 |
|
|
400 |
-6 |
380.16 |
6.3.1.4 Minimum output power for power class 7
The minimum output power shall not exceed the values specified in Table 6.3.1.4-1 for each operating band supported. The minimum power is verified in beam locked mode with the test metric of EIRP (Link=TX beam peak direction, Meas=Link angle).
Table 6.3.1.4-1: Minimum output power for power class 7
|
Operating band |
Channel bandwidth (MHz) |
Minimum output power (dBm) |
Measurement bandwidth (MHz) |
|
n257, n258, n261 |
50 |
-13 |
47.58 |
|
100 |
-13 |
95.16 |