C.1 EUTRA_POS_ASP_TypeDefs
37.571-43GPPPart 4: Test suitesRelease 16TSUser Equipment (UE) conformance specification for UE positioning
Type definitions for configuration of Positioning Reference Signal in the system simulator; Common design principles: refer to 3GPP TS 36.523-3 [6], annex D.
C.1.1 System_Configuration_PosExt
Formal ASP Definitions for EUTRA PRS system configuration.
SystemRequest_PosExt_Type
|
TTCN-3 Union Type |
||
|
Name |
SystemRequest_PosExt_Type |
|
|
Comment |
NOTE: Same structure as SystemRequest_Type in 3GPP TS 36.523-3 [6], annex D. |
|
|
Cell |
configure PRS in an LTE cell; the cell shall be configured as usual beforehand and SS shall raise an error when the cell does not exist yet; there is no explicit release of the PRS but the whole cell needs to be released |
|
SystemConfirm_PosExt_Type
|
TTCN-3 Union Type |
||
|
Name |
SystemConfirm_PosExt_Type |
|
|
Comment |
confirmations for system configuration; in general to be sent after the configuration has been done |
|
|
Cell |
Null_Type |
(no further parameters from SS) |
C.1.2 Cell_Configuration_PosExt
Specific Info for PRS Cell Configuration Primitive.
C.1.2.1 Cell_Configuration_Common_PosExt
CellConfigRequest_PosExt_Type
|
TTCN-3 Union Type |
||
|
Name |
CellConfigRequest_PosExt_Type |
|
|
Comment |
NOTE: Same structure as SystemRequest_Type in 3GPP TS 36.523-3 [6], annex D. |
|
|
AddOrReconfigure |
for PRS configuration of given cell: CellId : identifier of the cell to be configured RoutingInfo : None TimingInfo : Now (for initial configuration and for reconfiguration in general) ControlInfo : CnfFlag:=true; FollowOnFlag:=false (in general) |
|
CellConfigInfo_PosExt_Type
|
TTCN-3 Record Type |
|||
|
Name |
CellConfigInfo_PosExt_Type |
||
|
Comment |
NOTE: Same structure as SystemRequest_Type in 3GPP TS 36.523-3 [6], annex D; common information for initial cell configuration or reconfiguration; in case of reconfiguration OMIT means ‘keep configuration as it is’. |
||
|
Basic |
opt |
Extended PRS information for a cell |
|
BasicCellConfig_PosExt_Type
|
TTCN-3 Record Type |
|||
|
Name |
BasicCellConfig_PosExt_Type |
||
|
Comment |
NOTE: Same structure as SystemRequest_Type in 3GPP TS 36.523-3 [6], annex D. Physical layer: |
||
|
PhysicalLayerConfigDL |
opt |
Default settings regarding physical control PRS signal |
|
C.1.2.2 Downlink_Physical_Layer_Configuration_PosExt
Downlink physical layer configuration:
– DL antenna configuration for port 6.
– PRS configuration.
AntennaPort6_Config_Type
|
TTCN-3 Record Type |
|||
|
Name |
AntennaPort6_Config_Type |
||
|
Comment |
to configure antenna port 6 for positioning; all fields are declared as optional to allow single reconfigurations; in this case omit means "keep as it is" |
||
|
Port |
AntennaPort_Type |
opt |
|
|
PRS |
PRS_Info |
opt |
|
PhysicalLayerConfigDL_PosExt_Type
|
TTCN-3 Record Type |
|||
|
Name |
PhysicalLayerConfigDL_PosExt_Type |
||
|
Comment |
all fields are declared as optional to allow single reconfigurations; in this case omit means "keep as it is" |
||
|
AntennaPort6 |
opt |
||
C.1.3 System_Interface_PosExt
SYSTEM_CTRL_POSEXT_REQ
|
TTCN-3 Record Type |
|||
|
Name |
SYSTEM_CTRL_POSEXT_REQ |
||
|
Comment |
|||
|
Common |
ReqAspCommonPart_Type |
For configuration of antenna port 6 TimingInfo is now |
|
|
Request |
configure a PRS in a cell |
||
SYSTEM_CTRL_POSEXT_CNF
|
TTCN-3 Record Type |
|||
|
Name |
SYSTEM_CTRL_POSEXT_CNF |
||
|
Comment |
|||
|
Common |
CnfAspCommonPart_Type |
TimingInfo is ignored by TTCN => SS may set TimingInfo to "None" |
|
|
Confirm |
|||
EUTRA_SYSTEM_POSEXT_PORT
|
TTCN-3 Port Type |
||
|
Name |
EUTRA_SYSTEM_POSEXT_PORT |
|
|
Comment |
EUTRA PTC: Ext Port for system configuration of antenna port 6 |
|
|
out |
||
|
in |
||