FPointA

Reference Point A frequency.

F_carrier

F_carrier is the centre frequency of a carrier corresponding to its NR-ARFCN value.

F_carrierLow

F_carrierLow is the centre frequency of lowest subcarrier of the carrier.
F_carrierLow = F_carrier – 12 * SCS_Carrier * (N_RB / 2) with N_RB according to Table 5.3.2-1 of TS 38.101-1 [7] and TS 38.101-2 [8] for the channel bandwidth of the carrier.

ΔF_{carrierBandwidth}

ΔF_{carrierBandwidth} is the carrier’s channel bandwidth as provided in carrierBandwidth to the UE (SCS-SpecificCarrier).

ΔF_{offsetToCarrier}

ΔF_{offsetToCarrier} is the frequency offset between Point A and the lower edge of the carrier. F_{offsetToCarrier} = offsetToCarrier * PRB size, where PRB size according to the subcarrier spacing of the carrier. offsetToCarrier is signalled to the UE (SCS-SpecificCarrier).

F_SSref

Centre frequency of SSB. For a cell selectable as PCell the F_SSref corresponds to a valid GSCN value according to clause 5.4.3.1 of TS 38.101-1 [7] and TS 38.101-2 [8].

ΔF_Offset(RBs)

ΔF_Offset(RBs) = 12* Offset(RBs) * subCarrierSpacingCommon, where Offset(RBs) is given in tables 13-1 to 13-10 of TS 38.213 [22].

ΔF_kSSB

ΔF_KSSB = k_SSB * subcarrier spacing of SSB (SCS_SSB).

ΔF_{OffsetSSB-CORESET0}

Frequency offset between the lowest subcarrier of the SSB and the lowest subcarrier of CORESET#0. ΔF_{OffsetSSB-CORESET0} = ΔF_Offset(RBs) + ΔF_kSSB.

ΔF_{OffsetCORESET-0-Carrier}

Frequency offset, F_{OffsetCORESET#0-Carrier}, between the lowest subcarrier of CORESET#0 and the lowest subcarrier of the carrier.

ΔF_{OffsetSSB-Carrier}

Frequency offset between the lowest subcarrier of the SSB and the lowest subcarrier of the carrier.

F_CORESET0Low

Centre frequency of subcarrier 0 of CORESET#0.

F_{OffsetToPointA}

Frequency of the lowest subcarrier of the lowest resource block, which has the subcarrier spacing provided by the higher-layer parameter subCarrierSpacingCommon and overlaps with the SS/PBCH block used by the UE for initial cell selection, expressed in units of resource blocks assuming 15 kHz subcarrier spacing for FR1 and 60 kHz subcarrier spacing for FR2 (TS 38.211 [29] clause 4.4.4.2).

ΔF_{OffsetToPointA}

Frequency offset between F_{OffsetToPointA} and point A. ΔF_{OffsetToPointA} = offsetToPointA * {15 kHz for FR1; 60 kHz for FR2} (TS 38.211 [29] clause 4.4.4.2).

SCS_Carrier

subcarrier spacing for the carrier (SCS-SpecificCarrier):
FR1: 15kHz, 30kHz or 60kHz according to TS 38.101-1 [7] Table 5.3.5-1

FR2: 60kHz or 120kHz according to TS 38.101-2 [8] Table 5.3.5-1

SCS_SSB

SS/PBCH block subcarrier spacing

FR1: 15kHz or 30kHz according to TS 38.101-1 [7] Table 5.4.3.3-1

FR2: 120kHz or 240kHz according to TS 38.101-2 [8] Table 5.4.3.3-1

NOTE: According to the tables in clause 13 of TS 38.213 [22] not all combinations of SCS_SSB and SCS_Carrier are applicable.

SCS_common

Subcarrier spacing for SIB1, Msg.2/4 for initial access, paging and broadcast SI-messages. Provided to the UE in the MIB in IE subCarrierSpacingCommon.

PRB_size

Physical Resource Block size of the carrier = 12 * SCS_Carrier.

CRB_size

Common Resource Block size = 12 * SCS_common.

F_{DL_Low,} F_{UL_Low}

Lowest frequency of the downlink and uplink frequency range of the band as defined in clause 5.2 of TS 38.101-1 [7] and TS 38.101-2 [8].

F_{DL_High,} F_{UL_High}

Highest frequency of the downlink and uplink frequency range of the band as defined in clause 5.2 of TS 38.101-1 [7] and TS 38.101-2 [8].

ΔF_Raster

Frequency raster of the band as defined in clause 5.4.2.3 of TS 38.101-1 [7] and TS 38.101-2 [8].

BW_DL

Bandwidth of downlink frequency range of the band.

BW_UL

Bandwidth of uplink frequency range of the band.

CBW_DL

Downlink channel bandwidth (MHz) of the carrier according to Table 5.3.2-1 of TS 38.101-1 [7] and TS 38.101-2 [8].

CBW_UL

Uplink channel bandwidth (MHz) of the carrier according to Table 5.3.2-1 of TS 38.101-1 [7] and TS 38.101-2 [8].

F_{Tx-Rx_separation}

Default Tx – Rx carrier centre frequency separation of the band as defined in clause 5.4.4 of TS 38.101-1 [7]. For TDD bands F_{Tx-Rx_separation} = 0.

ΔF_{Tx-Rx_separation}

ΔF_Tx-Rx = | (BW_DL – BW_UL)/2 | is the deviation to the default Tx-Rx carrier centre frequency separation (F_{Tx-Rx_separation}) for FDD FR1 bands supporting asymmetric channel bandwidths as defined in clause 5.3.6 of TS 38.101-1 [7].

BW_SSB

Bandwidth of the SSB. BW_SSB = 12 * SCS_SSB * 20

ΔGSCN, GSCN_MIN, GSCN_MAX

GSCN step size, GSCN minimum and GSCN maximum values for the NR band according to table 5.4.3.3-1 of TS 38.101-1 [7] and TS 38.101-2 [8]

Offset_RBs

Offset (RBs) according to the applicable table 13-1 to 13-10 in TS 38.213 [22] for the given band and {SCS_SSB, SCS_Carrier} combination of the carrier.

Offset_RBs,max

Maximum value for Offset (RBs) according to the applicable table 13-1 to 13-1o in TS 38.213 [22] for the given band and {SCS_SSB, SCS_Carrier} combination of the carrier limited to the table indexes with number of RBs equal to the minimum value of in the table.

Offset_RBs,min

Minimum value for Offset (RBs) according to the applicable table 13-1 to 13-1o in TS 38.213 [22] for the given band and {SCS_SSB, SCS_Carrier} combination of the carrier limited to the table indexes with number of RBs equal to the minimum value of in the table.