4.7A Default TC message and information element contents
38.508-13GPP5GSPart 1: Common test environmentRelease 17TSUser Equipment (UE) conformance specification
This clause contains the default values of common TC (Test Control, see [11]) messages and information elements, which apply to all test cases unless otherwise specified. All the messages and information elements are listed in alphabetical order.
4.7A.1 Test mode messages
– ACTIVATE TEST MODE with the following exception:
– The supported test modes for 5GS are limited to those specified in subclause 38.509 [11] 5.3.4.
Same as TS 36.508 [2], Table 4.7A-1.
– ACTIVATE TEST MODE COMPLETE
Same as TS 36.508 [2], Table 4.7A-2.
– DEACTIVATE TEST MODE
Same as TS 36.508 [2], Table 4.7A-5.
– DEACTIVATE TEST MODE COMPLETE
Same as TS 36.508 [2], Table 4.7A-6.
4.7A.2 Test loop messages
– CLOSE UE TEST LOOP
Same as TS 36.508 [2], Table 4.7A-3 with the following exception:
– The supported test modes for 5GS are limited to those specified in subclause 38.509 [11] 5.3.4.
– CLOSE UE TEST LOOP COMPLETE
Same as TS 36.508 [2], Table 4.7A-4.
– OPEN UE TEST LOOP
Same as TS 36.508 [2], Table 4.7A-7.
– OPEN UE TEST LOOP COMPLETE
Same as TS 36.508 [2], Table 4.7A-8.
4.7A.3 Beamlock messages
– ACTIVATE BEAMLOCK
This message is only sent in the direction SS to UE, embedded in a RRC DLInformationTransfer message.
Table 4.7A.3-1: ACTIVATE BEAMLOCK
|
Derivation Path: 38.509 clause 6.4.1 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
Protocol discriminator |
1 1 1 1 |
||
|
Skip indicator |
0 0 0 0 |
||
|
Message type |
1 0 1 0 0 0 0 0 |
||
|
UE Beamlock test Function |
0 0 0 0 0 0 0 1 |
Tx Only |
|
|
UE Beamlock test Function |
0 0 0 0 0 0 1 0 |
Rx Only |
|
|
UE Beamlock test Function |
0 0 0 0 0 0 1 1 |
Tx and Rx |
|
|
Condition |
Explanation |
|
Tx Only |
Activation UE beamlock function for Tx only |
|
Rx Only |
Activation UE beamlock function for Rx only |
|
Tx and Rx |
Activation UE beamlock function for both Tx and Rx |
– ACTIVATE BEAMLOCK COMPLETE
This message is only sent in the direction UE to SS, embedded in a RRC ULInformationTransfer message.
Table 4.7A.3-2: ACTIVATE BEAMLOCK COMPLETE
|
Derivation Path: 38.509 clause 6.4.2 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
Protocol discriminator |
1 1 1 1 |
||
|
Skip indicator |
0 0 0 0 |
||
|
Message type |
1 0 1 0 0 0 0 1 |
||
– DEACTIVATE BEAMLOCK
This message is only sent in the direction SS to UE, embedded in a RRC DLInformationTransfer message.
Table 4.7A.3-3: DEACTIVATE BEAMLOCK
|
Derivation Path: 38.509 clause 6.4.3 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
Protocol discriminator |
1 1 1 1 |
||
|
Skip indicator |
0 0 0 0 |
||
|
Message type |
1 0 1 0 0 0 1 0 |
||
– DEACTIVATE BEAMLOCK COMPLETE
This message is only sent in the direction UE to SS, embedded in a RRC ULInformationTransfer message.
Table 4.7A.3-4: DEACTIVATE BEAMLOCK COMPLETE
|
Derivation Path: 38.509 clause 6.4.4 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
Protocol discriminator |
1 1 1 1 |
||
|
Skip indicator |
0 0 0 0 |
||
|
Message type |
1 0 1 0 0 0 1 1 |
||
4.7A.4 UE SS-RSRP per receiver branch reporting messages
– SS-RSRPB REPORT REQUEST
FFS
– SS-RSRPB REPORT RESPONSE
FFS
4.7A.5 UE Positioning messages
– RESET UE POSITIONING STORED INFORMATION
FFS
– UPDATE UE LOCATION INFORMATION
FFS
4.7A.6 NSSAI delete messages
– NSSAI DELETE REQUEST
This message is only sent in the direction SS to UE, embedded in a RRC DLInformationTransfer message.
Table 4.7A.6-1: NSSAI DELETE REQUEST
|
Derivation Path: 38.509 clause 6.7.1 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
Protocol discriminator |
1 1 1 1 |
||
|
Skip indicator |
0 0 0 0 |
||
|
Message type |
1 0 0 0 0 1 1 0 |
||
|
Delete NSSAI type |
Set according to specific message contents |
||
|
Configured NSSAI |
Set according to specific message contents |
||
|
Allowed NSSAI |
Set according to specific message contents |
||
– NSSAI DELETE RESPONSE
This message is only sent in the direction UE to SS, embedded in a RRC ULInformationTransfer message.
Table 4.7A.6-2: NSSAI DELETE RESPONSE
|
Derivation Path: 38.509 clause 6.7.2 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
Protocol discriminator |
1 1 1 1 |
||
|
Skip indicator |
0 0 0 0 |
||
|
Message type |
1 0 1 0 0 1 1 1 |
||
4.7A.7 UE Power Limit Messages
– ACTIVATE POWER LIMIT REQUEST
This Message is only sent in the direction SS to UE, embedded in a RRC DLInformationTransfer message.
Table 4.7A.7-1: ACTIVATE POWER LIMIT REQUEST
|
Derivation Path: 38.509 clause 6.11.1 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
Protocol discriminator |
1 1 1 1 |
||
|
Skip indicator |
0 0 0 0 |
||
|
Message type |
1 0 1 0 1 1 1 0 |
||
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 0 0 1 0 |
TOT NR AGG BW 100 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 0 0 1 1 |
TOT NR AGG BW 150 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 0 1 0 0 |
TOT NR AGG BW 200 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 0 1 0 1 |
TOT NR AGG BW 250 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 0 1 1 0 |
TOT NR AGG BW 300 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 0 1 1 1 |
TOT NR AGG BW 350 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 1 0 0 0 |
TOT NR AGG BW 400 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 1 0 0 1 |
TOT NR AGG BW 450 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 1 0 1 0 |
TOT NR AGG BW 500 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 1 0 1 1 |
TOT NR AGG BW 550 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 1 1 0 0 |
TOT NR AGG BW 600 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 1 1 0 1 |
TOT NR AGG BW 650 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 1 1 1 0 |
TOT NR AGG BW 700 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 0 1 1 1 1 |
TOT NR AGG BW 750 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 0 0 0 0 |
TOT NR AGG BW 800 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 0 0 0 1 |
TOT NR AGG BW 850 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 0 0 1 0 |
TOT NR AGG BW 900 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 0 0 1 1 |
TOT NR AGG BW 950 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 0 1 0 0 |
TOT NR AGG BW 1000 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 0 1 0 1 |
TOT NR AGG BW 1050 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 0 1 1 0 |
TOT NR AGG BW 1100 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 0 1 1 1 |
TOT NR AGG BW 1150 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 1 0 0 0 |
TOT NR AGG BW 1200 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 1 0 0 1 |
TOT NR AGG BW 1250 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 1 0 1 0 |
TOT NR AGG BW 1300 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 1 0 1 1 |
TOT NR AGG BW 1350 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 1 1 0 0 |
TOT NR AGG BW 1400 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 1 1 0 1 |
TOT NR AGG BW 1450 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 1 1 1 0 |
TOT NR AGG BW 1500 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 0 1 1 1 1 1 |
TOT NR AGG BW 1550 |
|
|
TOTAL NR AGGREGATED BANDWIDTH |
0 0 1 0 0 0 0 0 |
TOT NR AGG BW 1600 |
|
|
PCELL NR BANDWIDTH |
0 0 0 0 0 0 0 1 |
PCELL NR BW 50 |
|
|
PCELL NR BANDWIDTH |
0 0 0 0 0 0 1 0 |
PCELL NR BW 100 |
|
|
PCELL NR BANDWIDTH |
0 0 0 0 0 1 0 0 |
PCELL NR BW 200 |
|
|
PCELL NR BANDWIDTH |
0 0 0 0 1 0 0 0 |
PCELL NR BW 400 |
|
|
Condition |
Explanation |
|
TOT NR AGG BW 100 |
Total NR aggregated Bandwidth equal to 100 MHz |
|
TOT NR AGG BW 150 |
Total NR aggregated Bandwidth equal to 150 MHz |
|
TOT NR AGG BW 200 |
Total NR aggregated Bandwidth equal to 200 MHz |
|
TOT NR AGG BW 250 |
Total NR aggregated Bandwidth equal to 250 MHz |
|
TOT NR AGG BW 300 |
Total NR aggregated Bandwidth equal to 300 MHz |
|
TOT NR AGG BW 350 |
Total NR aggregated Bandwidth equal to 350 MHz |
|
TOT NR AGG BW 400 |
Total NR aggregated Bandwidth equal to 400 MHz |
|
TOT NR AGG BW 450 |
Total NR aggregated Bandwidth equal to 450 MHz |
|
TOT NR AGG BW 500 |
Total NR aggregated Bandwidth equal to 500 MHz |
|
TOT NR AGG BW 550 |
Total NR aggregated Bandwidth equal to 550 MHz |
|
TOT NR AGG BW 600 |
Total NR aggregated Bandwidth equal to 600 MHz |
|
TOT NR AGG BW 650 |
Total NR aggregated Bandwidth equal to 650 MHz |
|
TOT NR AGG BW 700 |
Total NR aggregated Bandwidth equal to 700 MHz |
|
TOT NR AGG BW 750 |
Total NR aggregated Bandwidth equal to 750 MHz |
|
TOT NR AGG BW 800 |
Total NR aggregated Bandwidth equal to 800 MHz |
|
TOT NR AGG BW 850 |
Total NR aggregated Bandwidth equal to 850 MHz |
|
TOT NR AGG BW 900 |
Total NR aggregated Bandwidth equal to 900 MHz |
|
TOT NR AGG BW 950 |
Total NR aggregated Bandwidth equal to 950 MHz |
|
TOT NR AGG BW 1000 |
Total NR aggregated Bandwidth equal to 1000 MHz |
|
TOT NR AGG BW 1050 |
Total NR aggregated Bandwidth equal to 1050 MHz |
|
TOT NR AGG BW 1100 |
Total NR aggregated Bandwidth equal to 1100 MHz |
|
TOT NR AGG BW 1150 |
Total NR aggregated Bandwidth equal to 1150 MHz |
|
TOT NR AGG BW 1200 |
Total NR aggregated Bandwidth equal to 1200 MHz |
|
TOT NR AGG BW 1250 |
Total NR aggregated Bandwidth equal to 1250 MHz |
|
TOT NR AGG BW 1300 |
Total NR aggregated Bandwidth equal to 1300 MHz |
|
TOT NR AGG BW 1350 |
Total NR aggregated Bandwidth equal to 1350 MHz |
|
TOT NR AGG BW 1400 |
Total NR aggregated Bandwidth equal to 1400 MHz |
|
TOT NR AGG BW 1450 |
Total NR aggregated Bandwidth equal to 1450 MHz |
|
TOT NR AGG BW 1500 |
Total NR aggregated Bandwidth equal to 1500 MHz |
|
TOT NR AGG BW 1550 |
Total NR aggregated Bandwidth equal to 1550 MHz |
|
TOT NR AGG BW 1600 |
Total NR aggregated Bandwidth equal to 1600 MHz |
|
PCELL NR BW 50 |
PCC NR Bandwidth equal to 50 MHz |
|
PCELL NR BW 100 |
PCC NR Bandwidth equal to 100 MHz |
|
PCELL NR BW 200 |
PCC NR Bandwidth equal to 200 MHz |
|
PCELL NR BW 400 |
PCC NR Bandwidth equal to 400 MHz |
– ACTIVATE POWER LIMIT RESPONSE
This message is only sent in the direction UE to SS, embedded in a RRC ULInformationTransfer message.
Table 4.7A.7-2: ACTIVATE POWER LIMIT RESPONSE
|
Derivation Path: 38.509 clause 6.11.2 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
Protocol discriminator |
1 1 1 1 |
||
|
Skip indicator |
0 0 0 0 |
||
|
Message type |
1 0 1 0 1 1 1 1 |
||
– DEACTIVATE POWER LIMIT REQUEST
This message is only sent in the direction SS to UE, embedded in a RRC DLInformationTransfer message.
Table 4.7A.7-3: DEACTIVATE POWER LIMIT REQUEST
|
Derivation Path: 38.509 clause 6.11.3 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
Protocol discriminator |
1 1 1 1 |
||
|
Skip indicator |
0 0 0 0 |
||
|
Message type |
1 0 1 1 0 0 0 0 |
||
– DEACTIVATE POWER LIMIT RESPONSE
This message is only sent in the direction UE to SS, embedded in a RRC ULInformationTransfer message.
- Table 4.7A.7-3: DEACTIVATE POWER LIMIT RESPONSE
|
Derivation Path: 38.509 clause 6.11.4 |
|||
|
Information Element |
Value/remark |
Comment |
Condition |
|
Protocol discriminator |
1 1 1 1 |
||
|
Skip indicator |
0 0 0 0 |
||
|
Message type |
1 0 1 1 0 0 0 1 |
||