4.9.8 Test procedure for Registration Reject
38.508-13GPP5GSPart 1: Common test environmentRelease 17TSUser Equipment (UE) conformance specification
4.9.8.1 Scope
The purpose of this procedure is to reject the registration request, with a specific cause value, which may allow fields to be cleared in the USIM.
4.9.8.2 Procedure description
4.9.8.2.1 Initial conditions
As specified in the TC which calls the procedure in its entirety or refers to parts of it.
4.9.8.2.2 Procedure sequence
Table 4.9.8.2.2-1: Procedure for Registration Reject
|
St |
Procedure |
Message Sequence |
|
|
U – S |
Message |
||
|
1 |
The UE transmits an RRCSetupRequest message. |
–> |
NR RRC: RRCSetupRequest |
|
2 |
The SS transmits an RRCSetup message. |
<– |
NR RRC: RRCSetup |
|
3 |
The UE transmits an RRCSetupComplete message and a REGISTRATION REQUEST message. |
–> |
NR RRC: RRCSetupComplete 5GMM: REGISTRATION REQUEST |
|
4 |
The SS transmits an AUTHENTICATION REQUEST message including EAP-Request/AKA’-Challenge or 5G AKA Challenge. |
<– |
5GMM: AUTHENTICATION REQUEST |
|
5 |
The UE transmits an AUTHENTICATION RESPONSE message including EAP-Response/AKA’-Challenge or 5G AKA Response. |
–> |
5GMM: AUTHENTICATION RESPONSE |
|
6 |
The SS transmits a SECURITY MODE COMMAND message including EAP-Success if EAP-AKA’ used. |
<– |
5GMM: SECURITY MODE COMMAND |
|
7 |
The UE transmits a SECURITY MODE COMPLETE message. |
–> |
5GMM: SECURITY MODE COMPLETE |
|
8 |
The SS transmits a REGISTRATION REJECT message with the cause value set to Reject Cause. |
<– |
5GMM: REGISTRATION REJECT |
|
9 |
The SS transmits an RRCRelease message |
<– |
RRC: RRCRelease |
|
10 |
Test procedure for Switch off / Power off in State DEREGISTERED as specified in subclause 4.9.6.4 |
||
4.9.8.2.3 Specific message contents
Table 4.9.8.2.3-1: REGISTRATION REJECT
|
Derivation Path: table 4.7.1-9 |
||||
|
Information Element |
Value/remark |
Comment |
Condition |
|
|
5GMM cause |
Set according to Reject Cause |
Reject Cause set to #6 Illegal ME as default |
||