G.2 Regional requirement for Public Safety LTE BS in Korea
36.1043GPPBase Station (BS) radio transmission and receptionEvolved Universal Terrestrial Radio Access (E-UTRA)Release 18TS
Public Safety LTE (PS-LTE) service, commercial mobile service and Broadcasting are closely allocated for Band 28 in Korea. By making more strong blocking requirements, it provides more flexible site selection to locate for the PS-LTE BS and also it protects the uplink performance degradation. RRA (National Radio Research Agency) Announce 2015-30, "Article 17 of Technical Requirements of the Other Service Radio Equipment for Simple radio station, Space station and Earth station (Radio Equipment for Integrated Public Network)".
Figure G.2-1 Frequency Allocation in Korea
Table G-2.1: PS-LTE frequency band in Korea
PS- LTE Operating Band |
Downlink |
Uplink |
[MHz] |
[MHz] |
|
28 |
773 – 783 |
718 – 728 |
Table G-2.2: Blocking requirement for Wide Area BS, PS-LTE in Korea
E-UTRA channel bandwidth [MHz] |
Wanted signal mean power [dBm] |
Interfering signal mean power [dBm] |
Interfering signal centre frequency [MHz] |
Type of interfering signal |
10 |
PREFSENS + 6dB* |
-21 |
701.5, 707.5 |
5MHz E-UTRA signal |
Note*: PREFSENS depends on the channel bandwidth as specified in TS 36.104 [2] clause 7.2.1. Note**: Refer to TS 36.141, E-UTRA Test Mode 1.1 (E-TM1.1) The interfering signal shall be applied to the receiver antenna respectively. |
Table G-2.3: Blocking requirement for Local Area BS, PS-LTE in Korea
E-UTRA channel bandwidth [MHz] |
Wanted signal mean power [dBm] |
Interfering signal mean power [dBm] |
Interfering signal centre frequency [MHz] |
Type of interfering signal |
10 |
PREFSENS + 6dB* |
-13 |
701.5, 707.5 |
5MHz E-UTRA signal |
Note*: PREFSENS depends on the channel bandwidth as specified in TS 36.104 [2] clause 7.2.1. Note**: Refer to TS 36.141, E-UTRA Test Mode 1.1 (E-TM1.1) The interfering signal shall be applied to the receiver antenna respectively. |
Table G-2.4: Blocking requirement for Home BS, PS-LTE in Korea
E-UTRA channel bandwidth [MHz] |
Wanted signal mean power [dBm] |
Interfering signal mean power [dBm] |
Interfering signal centre frequency [MHz] |
Type of interfering signal |
10 |
PREFSENS + 22dB* |
+3 |
701.5, 707.5 |
5MHz E-UTRA signal |
Note*: PREFSENS depends on the channel bandwidth as specified in TS 36.104 [2] clause 7.2.1. Note**: Refer to TS 36.141, E-UTRA Test Mode 1.1 (E-TM1.1) The interfering signal shall be applied to the receiver antenna respectively. |
Table G-2.5: Blocking requirement for E-UTRA Medium Range BS, PS-LTE in Korea
E-UTRA channel bandwidth [MHz] |
Wanted signal mean power [dBm] |
Interfering signal mean power [dBm] |
Interfering signal centre |
Type of interfering signal |
10 |
PREFSENS +1dB* |
-21 |
701.5, 707.5 |
5MHz E-UTRA signal |
Note*: PREFSENS depends on the channel bandwidth as specified in Table 7.2.1-4. Note**: Refer to TS 36.141, E-UTRA Test Mode 1.1 (E-TM1.1) The interfering signal shall be applied to the receiver antenna respectively. |
Annex H (Informative):
Calculation of EIRP based on manufacturer declarations and site specific conditions