A.3.15 Reference Measurement Channels for LAA SCell with frame structure Type-3

36.1013GPPEvolved Universal Terrestrial Radio Access (E-UTRA)Release 18TSUser Equipment (UE) radio transmission and reception

A.3.15.1 Multi-antenna transmission (Common Reference Symbols)

A.3.15.1.1 Four antenna ports

Table A.3.15.1.1-2: Reference Channel with four CRS ports

Parameter

Unit

Value

Reference channel

R.1 FS3

Channel bandwidth

MHz

20

Allocated resource blocks (Note 4)

100

Allocated subframes per Radio Frame

10

Modulation

64QAM

Target Coding Rate

0.6

Information Bit Payload (Note 4)

For Sub-Frames 1,4,6,9

Bits

{46888,15840,24496,37888,19848}

For Sub-Frames 2, 7

{46888,15840,24496,37888,19848}

For Sub-Frames 3, 8

{46888,15840,24496,37888,19848}

For Sub-Frame 5

Bits

{46888,15840,24496,37888,19848}

For Sub-Frame 0

Bits

{46888,15840,24496,37888,19848}

Number of Code Blocks

(Notes 3 and 4)

For Sub-Frames 1,4,6,,9

{8,3,4,7,4}

For Sub-Frames 2,7

{8,3,4,7,4}

For Sub-Frames 3, 8

{8,3,4,7,4}

For Sub-Frame 5

{8,3,4,7,4}

For Sub-Frame 0

{8,3,4,7,4}

Binary Channel Bits (Note 4)

For Sub-Frames 1,4,6,9

Bits

{76800,26400,43200,62400,33600}

For Sub-Frames 2, 7

{76800,26400,43200,62400,33600}

For Sub-Frames 3, 8

{76800,26400,43200,62400,33600}

For Sub-Frame 5

Bits

{75936,26400,43200,61536,33600}

For Sub-Frame 0 (Note 5)

Bits

{75936,26400,43200,61536,33600}

UE Category

≥ 5

Note 1: 2 symbols allocated to PDCCH for 20 MHz, 15 MHz and 10 MHz channel BW; 3 symbols allocated to PDCCH for 5 MHz and 3 MHz; 4 symbols allocated to PDCCH for 1.4 MHz.

Note 2: Reference signal, synchronization signals and PBCH allocated as per TS 36.211 [4].

Note 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit).

Note 4: Given per component carrier per codeword.

Note 5: For {a1,a2,a3,a4,a5}, a1, a2, a3, a4 and a5 stand for the setup when the number of OFDM sybmols is 14, 6, 9, 12, 7, respectively.

A.3.15.2 Reference Measurement Channel for UE-Specific Reference Symbols

A.3.15.2.1 Two antenna ports (CSI-RS)

The reference measurement channels in Table A.3.15.2.1-1 apply for verifying demodulation performance for UE-specific reference symbols with two cell-specific antenna ports and two CSI-RS antenna ports for LAA SCell.

Table A.3.15.2.1-1: Reference Channel with two CRS ports

Parameter

Unit

Value

Reference channel

R.2 FS3

Channel bandwidth

MHz

20

Allocated resource blocks (Note 4)

100

Allocated subframes per Radio Frame

10

Modulation

16QAM

Target Coding Rate

1/2

Information Bit Payload (Note 4)

For Sub-Frames 1,4,6,9

Bits

{22920,7480,12960,19080,10296}

For Sub-Frames 2, 7

{22920,7480,12960,19080,10296}

For Sub-Frames 3, 8

{22920,7480,12960,19080,10296}

For Sub-Frame 5

Bits

{19848, 6712, 11448, 16992, 9144}

For Sub-Frame 0

Bits

{19848, 6712, 11448, 16992, 9144}

Number of Code Blocks

(Notes 3 and 4)

For Sub-Frames 1,4,6,9

{4,2,3,4,2}

For Sub-Frames 2,7

{4,2,3,4,2}

For Sub-Frames 3, 8

{4, 2, 3, 4, 2}

For Sub-Frame 5

{4, 2, 2, 3, 2}

For Sub-Frame 0

{4, 2, 2, 3, 2}

Binary Channel Bits (Note 4)

For Sub-Frames 1,4,6,9

Bits

{48000,15200,25600,38400,20000}

For Sub-Frames 2, 7

{47200,15200,25600,38400,20000}

For Sub-Frames 3, 8

{46400,15200,25600,38400,20000}

For Sub-Frame 5

Bits

{42240,13376,22528,33792,17600}

For Sub-Frame 0 (Note 5) (Note 6)

Bits

{42240,13376,22528,33792,17600}

UE Category

≥ 5

Note 1: 2 symbols allocated to PDCCH for 20 MHz, 15 MHz and 10 MHz channel BW; 3 symbols allocated to PDCCH for 5 MHz and 3 MHz; 4 symbols allocated to PDCCH for 1.4 MHz.

Note 2: Reference signal, synchronization signals and PBCH allocated as per TS 36.211 [4].

Note 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit).

Note 4: Given per component carrier per codeword.

Note 5: For TM9, 100 resource blocks are allocated in sub-frames 1, 2, 3, 4, 6, 7, 8, 9 and 88 resource blocks (RB0-RB43,RB56-RB99) are allocated in subframe 0 and subframe 5

Note 6: For {a1,a2,a3,a4,a5}, a1, a2, a3, a4 and a5 stand for the setup when the number of OFDM sybmols is 14, 6, 9, 12, 7, respectively

Table A.3.15-2: Void