6.2.5F Configured transmitted Power for category NB1 and NB2

36.1013GPPEvolved Universal Terrestrial Radio Access (E-UTRA)Release 18TSUser Equipment (UE) radio transmission and reception

For each slot i the category NB1and NB2 UE is allowed to set its configured maximum output power P_CMAX,c. The configured maximum output power P_CMAX,c is set within the following bounds:

P_{CMAX_L,c} ≤ P_CMAX,c ≤ P_{CMAX_H,c}

Where

 P_{CMAX_L,c} = MIN { P_EMAX,c , P_PowerClass – MPR_c – A-MPR_c}

 P_{CMAX_H,c} = MIN { P_EMAX,c, P_PowerClass}

 P_EMAX,c is the value given to IE P-Max, defined in [7]

 P_PowerClass is the maximum category NB1 and NB2 UE power specified in Table 6.2.2F-1 without taking into account the associated tolerance

 MPR_c is specified in subclause 6.2.3F

 A-MPR_c = 0dB unless otherwise stated.

The measurement period for P_UMAX,c is at least one sub-frame (1ms) for 15 KHz channel spacing, and at least a 2ms slot (excluding the 2304Ts gap when UE is not transmitting) respectively for the 3.75 KHz channel spacing. The measured maximum output power P_UMAX,c shall be within the following bounds:

P_{CMAX_L,c} – T(P_{CMAX_L,c}) ≤ P_UMAX,c ≤ P_{CMAX_H,c} + T(P_{CMAX_H,c})

Where T(P_CMAX) is defined by the tolerance table below and applies to P_{CMAX_L,c} and P_{CMAX_H,c} separately.

Table 6.2.5F-1: P_CMAX tolerance for power class 3

PCMAX (dBm)	Tolerance T(PCMAX) (dB)
21 ≤ PCMAX ≤ 23	2.0
20 ≤ PCMAX < 21	2.5
19 ≤ PCMAX < 20	3.5
18 ≤ PCMAX < 19	4.0
13 ≤ PCMAX < 18	5.0
8 ≤ PCMAX < 13	6.0
-40 ≤ PCMAX < 8	7.0

Table 6.2.5F-2: P_CMAX tolerance for power class 5

PCMAX,c (dBm)	Tolerance T(PCMAX,c) (dB)
18 ≤ PCMAX ≤ 20	2.0
17 ≤ PCMAX,c < 18	2.5
16 ≤ PCMAX,c < 17	3.5
15 ≤ PCMAX,c < 16	4.0
10 ≤ PCMAX,c < 15	5.0
5 ≤ PCMAX,c < 10	6.0
-40 ≤ PCMAX,c < 5	7.0

Table 6.2.5F-3: P_CMAX tolerance for power class 6

PCMAX,c (dBm)	Tolerance T(PCMAX,c) (dB)
13 ≤ PCMAX,c ≤ 14	2.5
12 ≤ PCMAX,c < 13	3.5
11 ≤ PCMAX,c < 12	4
8 ≤ PCMAX,c < 11	5
5 ≤ PCMAX,c < 8	6.0
-40 ≤ PCMAX,c < 5	7.0