6.2.4E UE maximum output power with additional requirements for category M1 and M2 UE
36.1013GPPEvolved Universal Terrestrial Radio Access (E-UTRA)Release 18TSUser Equipment (UE) radio transmission and reception
Additional ACLR and spectrum emission requirements can be signalled by the network to indicate that the UE shall also meet additional requirements in a specific deployment scenario. To meet these additional requirements, Additional Maximum Power Reduction (A-MPR) is allowed for the output power as specified in Table 6.2.2E-1 and Table 6.2.4E-2. Unless stated otherwise, an A-MPR of 0 dB shall be used.
For UE Power Class 3 and 5 the specific requirements and identified subclauses are specified in Table 6.2.4E-1 and Table 6.2.4E-2 along with the allowed A-MPR values that may be used to meet these requirements. The allowed A-MPR values specified below in Table 6.2.4E-1 and Table 6.2.4E-2 and from 6.2.4-2 to 6.2.4-15 are in addition to the allowed MPR requirements specified in subclause 6.2.3E.
Table 6.2.4E-1: Additional Maximum Power Reduction (A-MPR) for category M1 UE
|
Network Signalling value |
Requirements (subclause) |
E-UTRA Band |
Resources Blocks (NRB) |
A-MPR (dB) |
|
NS_01 |
6.6.2.1.1 |
Table 5.5-1 |
Table 5.6-1 |
N/A |
|
NS_03 |
6.6.2.2.1 |
2, 4 |
Table 5.6-1 |
N/A |
|
NS_04 |
6.6.2.2.2 |
41 |
Table 6.2.4E-3 |
|
|
NS_05 |
6.6.3.3.1 |
1 |
Table 5.6-1 |
N/A |
|
NS_06 |
6.6.2.2.3 |
12, 13, 14, 85 |
Table 5.6-1 |
N/A |
|
NS_07 |
6.6.2.2.3 6.6.3.3.2 |
13 |
Table 6.2.4E-4 |
|
|
NS_08 |
6.6.3.3.3 |
19 |
Table 5.6-1 |
N/A |
|
NS_09 |
6.6.3.3.4 |
21, 74 |
Table 5.6-1 |
N/A |
|
NS_10 |
20 |
Table 5.6-1 |
N/A |
|
|
NS_12 |
6.6.3.3.5 |
26 |
Table 6.2.4E-5 |
|
|
NS_13 |
6.6.3.3.6 |
26 |
Table 5.6-1 |
N/A |
|
NS_14 |
6.6.3.3.7 |
26 |
Table 5.6-1 |
N/A |
|
NS_15 |
6.6.3.3.8 |
26 |
Table 6.2.4-9 |
|
|
NS_16 |
6.6.3.3.9 |
27 |
Table 5.6-1 |
N/A |
|
NS_17 |
6.6.3.3.10 |
28 |
Table 5.6-1 |
N/A |
|
NS_18 |
6.6.3.3.11 |
28 |
Table 5.6-1 |
N/A |
|
NS_22 |
6.6.3.3.16 |
42, 43 |
Table 5.6-1 |
N/A |
|
NS_23 |
6.6.3.3.17 |
42, 43 |
Table 5.6-1 |
N/A |
|
NS_27 |
6.6.2.2.5, 6.6.3.3.23 |
48 |
Table 5.6-1 |
N/A |
|
NS_32 |
– |
– |
– |
– |
|
NS_35 |
6.6.2.2.7 |
71 |
Table 5.6-1 |
N/A |
|
NS_38 |
6.6.3.3.29 |
74 |
Table 5.6-1 |
N/A |
|
NS_39 |
6.6.3.3.30 |
74 |
Table 5.6-1 |
N/A |
|
NS_56 |
6.6.3.3.35 |
24 |
Table 6.2.4E-25 |
|
Table 6.2.4E-2: Additional Maximum Power Reduction (A-MPR) for category M2 UE
|
Network Signalling value |
Requirements (subclause) |
E-UTRA Band |
Narrowband bandwidth |
Resources Blocks (NRB) |
A-MPR (dB) |
|
NS_01 |
6.6.2.1.1 |
Table 5.5-1 |
1.4, 3, 5 |
Table 5.6-1 |
N/A |
|
NS_03 |
6.6.2.2.1 |
2, 4 |
3,5 |
Table 6.2.4-1 |
|
|
NS_04 |
6.6.2.2.2 |
41 |
5 |
Table 6.2.4-1 |
|
|
NS_05 |
6.6.3.3.1 |
1 |
1.4, 3, 5 |
Table 6.2.4-18E |
|
|
NS_06 |
6.6.2.2.3 |
12, 13, 14, 85 |
1.4, 3, 5 |
Table 5.6-1 |
N/A |
|
NS_07 |
6.6.2.2.3 6.6.3.3.2 |
13 |
[TBD] |
||
|
NS_08 |
6.6.3.3.3 |
19 |
1.4, 3, 5 |
Table 5.6-1 |
N/A |
|
NS_09 |
6.6.3.3.4 |
21 |
1.4, 3, 5 |
Table 5.6-1 |
N/A |
|
NS_10 |
20 |
1.4, 3, 5 |
Table 5.6-1 |
N/A |
|
|
NS_12 |
6.6.3.3.5 |
26 |
1.4, 3, 5 |
Table 6.2.4-1 |
|
|
NS_13 |
6.6.3.3.6 |
26 |
5 |
Table 6.2.4-1 |
|
|
NS_14 |
6.6.3.3.7 |
26 |
N/A |
Table 5.6-1 |
N/A |
|
NS_15 |
6.6.3.3.8 |
26 |
1.4, 3, 5 |
Table 5.6-1 |
|
|
NS_16 |
6.6.3.3.9 |
27 |
3,5 |
Table 6.2.4-1 |
|
|
NS_17 |
6.6.3.3.10 |
28 |
5 |
Table 6.2.4-1 |
|
|
NS_18 |
6.6.3.3.11 |
28 |
5 |
Table 6.2.4-1 |
|
|
NS_22 |
6.6.3.3.16 |
42, 43 |
1.4, 3, 5 |
Table 5.6-1 |
N/A |
|
NS_23 |
6.6.3.3.17 |
42, 43 |
1.4, 3, 5 |
Table 5.6-1 |
N/A |
|
NS_27 |
6.6.2.2.5, 6.6.3.3.23 |
48 |
1.4, 3, 5 |
Table 5.6-1 |
N/A |
|
NS_32 |
– |
– |
– |
– |
|
|
NS_35 |
6.6.2.2.7 |
71 |
1.4, 3, 5 |
Table 5.6-1 |
N/A |
|
NS_56 |
6.6.3.3.35 |
24 |
5 |
Table 6.2.4-1 |
NS_56 |
Table 6.2.4E-3: A-MPR for "NS_04" for Cat-M1
|
Channel bandwidth [Hz] |
Parameters |
Region |
||||
|
5 |
Fc [MHz] |
≤ 2500.5 |
||||
|
(NBindex, RBstart ) |
(0, 0-5) |
(1, 0-1) |
||||
|
LCRB [RBs] |
> 0 |
|||||
|
A-MPR [dB] |
≤ 2 |
|||||
|
10 |
Fc [MHz] |
≤ 2504 |
||||
|
(NBindex, RBstart ) |
(0, 0-5) |
(1, 0-1) |
||||
|
LCRB [RBs] |
>0 |
|||||
|
A-MPR [dB] |
≤ 3 |
|||||
|
15 |
Fc [MHz] |
≤ 2510.8 |
||||
|
(NBindex, RBstart ) |
(0, 0-5) |
(1, 0-5) |
||||
|
LCRB [RBs] |
>0 |
|||||
|
A-MPR [dB] |
≤ 3 |
|||||
|
20 |
Fc [MHz] |
≤ 2517.5 |
||||
|
(NBindex, RBstart ) |
(0, 0-5) |
(1, 0-5) |
(2, 0-5) |
(3, 0-2) |
||
|
LCRB [RBs] |
>0 |
|||||
|
A-MPR [dB] |
≤ 3 |
|||||
|
NOTE 1: RBstart indicates the lowest RB index of transmitted resource blocks NOTE 2: LCRB is the length of a contiguous resource block allocation NOTE 3: For intra-subframe frequency hopping which intersects regions, notes 1 and 2 apply on a per slot basis NOTE 4: For intra-subframe frequency hopping which intersects regions, the larger A-MPR value may be applied for both slots in the subframe NOTE 5: For CAT-M1 device, the NB index is the starting index allocated from DCI[6], the RBstart is indexed within the NB allocated to cat-M1 device. |
||||||
Table 6.2.4E-4: A-MPR for "NS_07" for Cat-M1
|
BW [MHz] |
5 |
10 |
||||
|
(NBindex,RBstart) |
(0,<6) |
(0,<6) |
(3,<6) |
(3,<6) |
(0,<6) |
(7,<6) |
|
LCRB |
>4 and <7 |
>1 and ≤4 |
>4 and <7 |
>1 and ≤4 |
>2and <7 |
>2and <7 |
|
AMPR [dB] |
2 |
1 |
2 |
1 |
1 |
1 |
|
NOTE 1: NBindex is the narrowband index that is defined in 6.2.7 in [4]. The resource block assignment is defined within the narrowband as defined in 5.3.3.1.12 and 5.3.3.1.13 in [5]. |
||||||
Table 6.2.4E-5: A-MPR for "NS_12" for Cat-M1
|
Channel bandwidth [MHz] |
Parameters |
Region |
|||
|
1.4 |
(NBindex, RBstart ) |
(0,0) |
(0,1-2) |
||
|
LCRB [RBs] |
≤3 |
≥4 |
≥4 |
||
|
A-MPR [dB] |
≤3 |
≤6 |
≤3 |
||
|
3 |
(NBindex, RBstart ) |
(0,0-2) |
|||
|
LCRB [RBs] |
>0 |
||||
|
A-MPR [dB] |
≤4 |
||||
|
5 |
(NBindex, RBstart ) |
(0, 0-5) |
|||
|
LCRB [RBs] |
>0 |
||||
|
A-MPR [dB] |
≤5 |
||||
|
10 |
(NBindex, RBstart ) |
(0, 0-5) |
(1, 0-5) |
(2,0-2) |
|
|
LCRB [RBs] |
>0 |
||||
|
A-MPR [dB] |
≤4 |
||||
|
15 |
(NBindex, RBstart ) |
(0-5,0-5) |
|||
|
LCRB [RBs] |
>0 |
||||
|
A-MPR [dB] |
≤4 |
||||
For subPRB allocation, the allowed A-MPR values specified below in Table 6.2.4E-6 and Table 6.2.4E-7 for category M1 UE and category M2 UE respectively in addition to the allowed MPR requirements specified in subclause 6.2.3E.
Table 6.2.4E-6: Additional Maximum Power Reduction (A-MPR) for category M1 UE for subPRB allocation
|
Network Signalling value |
Requirements (subclause) |
E-UTRA Band |
A-MPR (dB) |
|
NS_01 |
6.6.2.1.1 |
Table 5.5-1 |
N/A |
|
NS_03 |
6.6.2.2.1 |
2, 4 |
Table 6.2.4E-8 |
|
NS_04 |
6.6.2.2.2 |
41 |
Table 6.2.4E-9 |
|
NS_05 |
6.6.3.3.1 |
1 |
[N/A] |
|
NS_06 |
6.6.2.2.3 |
12, 13, 14 |
Table 6.2.4E-13 |
|
NS_07 |
6.6.2.2.3 6.6.3.3.2 |
13 |
Table 6.2.4E-23 |
|
NS_08 |
6.6.3.3.3 |
19 |
[N/A] |
|
NS_09 |
6.6.3.3.4 |
21, 74 |
[N/A] |
|
NS_10 |
20 |
[N/A] |
|
|
NS_12 |
6.6.3.3.5 |
26 |
Table 6.2.4E-14 |
|
NS_13 |
6.6.3.3.6 |
26 |
[N/A] |
|
NS_14 |
6.6.3.3.7 |
26 |
[N/A] |
|
NS_15 |
6.6.3.3.8 |
26 |
[N/A] |
|
NS_16 |
6.6.3.3.9 |
27 |
[N/A] |
|
NS_17 |
6.6.3.3.10 |
28 |
[N/A] |
|
NS_18 |
6.6.3.3.11 |
28 |
[N/A] |
|
NS_22 |
6.6.3.3.16 |
42, 43 |
[N/A] |
|
NS_23 |
6.6.3.3.17 |
42, 43 |
[N/A] |
|
NS_27 |
6.6.2.2.5, 6.6.3.3.23 |
48 |
Table 6.2.4E-28 |
|
NS_32 |
– |
– |
– |
|
NS_35 |
6.6.2.2.7 |
71 |
Table 6.2.4E-15 |
|
NS_38 |
6.6.3.3.29 |
74 |
Table 6.2.4E-16 |
|
NS_39 |
6.6.3.3.30 |
74 |
[N/A] |
|
NS_56 |
6.6.3.3.35 |
24 |
Table 6.2.4E-26 |
Table 6.2.4E-7: Additional Maximum Power Reduction (A-MPR) for category M2 UE for subPRB allocation
|
Network Signalling value |
Requirements (subclause) |
E-UTRA Band |
A-MPR (dB) |
|
NS_01 |
6.6.2.1.1 |
Table 5.5-1 |
N/A |
|
NS_03 |
6.6.2.2.1 |
2, 4 |
Table 6.2.4E-10 |
|
NS_04 |
6.6.2.2.2 |
41 |
Table 6.2.4E-11 |
|
NS_05 |
6.6.3.3.1 |
1 |
Table 6.2.4E-17 |
|
NS_06 |
6.6.2.2.3 |
12, 13,14 |
Table 6.2.4E-18 |
|
NS_07 |
6.6.2.2.3 6.6.3.3.2 |
13 |
Table 6.2.4E-12 |
|
NS_08 |
6.6.3.3.3 |
19 |
N/A |
|
NS_09 |
6.6.3.3.4 |
21 |
N/A |
|
NS_10 |
20 |
N/A |
|
|
NS_12 |
6.6.3.3.5 |
26 |
Table 6.2.4E-19 |
|
NS_13 |
6.6.3.3.6 |
26 |
Table 6.2.4E-20 |
|
NS_14 |
6.6.3.3.7 |
26 |
N/A |
|
NS_15 |
6.6.3.3.8 |
26 |
Table 6.2.4E-21 |
|
NS_16 |
6.6.3.3.9 |
27 |
Table 6.2.4E-22 |
|
NS_17 |
6.6.3.3.10 |
28 |
N/A |
|
NS_18 |
6.6.3.3.11 |
28 |
N/A |
|
NS_22 |
6.6.3.3.16 |
42, 43 |
[N/A] |
|
NS_23 |
6.6.3.3.17 |
42, 43 |
[N/A] |
|
NS_27 |
6.6.2.2.5, 6.6.3.3.23 |
48 |
[N/A] |
|
NS_32 |
– |
– |
– |
|
NS_35 |
6.6.2.2.7 |
71 |
N/A |
|
NS_38 |
6.6.3.3.29 |
74 |
Table 6.2.4E-24 |
|
NS_39 |
6.6.3.3.30 |
74 |
N/A |
|
NS_56 |
6.6.3.3.35 |
24 |
Table 6.2.4E-27 |
Table 6.2.4E-8: A-MPR for "NS_03" for Cat-M1 with sub-PRB allocation
|
BW [MHz] |
5 MHz |
|||
|
(NBindex,SCstart) |
(0, ≤9) |
(0, ≥63) |
(0, ≤9) |
(0, ≥63) |
|
Lcsc |
2 |
2 |
3,6 |
3,6 |
|
AMPR [dB] |
≤[0.5] |
≤[0.5] |
≤[1] |
≤[1] |
|
NOTE 1: NBindex is the narrowband index that is defined in 6.2.7 in [4]. The resource block assignment is defined within the narrowband as defined in 5.3.3.1.12 and 5.3.3.1.13 in [5]. NOTE 2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB of NB indicated with NBindex. |
||||
Table 6.2.4E-9: A-MPR for "NS_04" for Cat-M1 with sub-PRB allocation
|
BW [MHz] |
5 MHz |
|
|
(NBindex,SCstart) |
(0, ≤9) |
(0, ≤9) |
|
Lcsc |
2 |
3,6 |
|
AMPR [dB] |
≤[1] |
≤[1.5] |
|
NOTE 1: NBindex is the narrowband index that is defined in 6.2.7 in [4]. The resource block assignment is defined within the narrowband as defined in 5.3.3.1.12 and 5.3.3.1.13 in [5]. NOTE 2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB of NB indicated with NBindex. |
||
Table 6.2.4E-10: A-MPR for "NS_03" for Cat-M2 with sub-PRB allocation
|
BW [MHz] |
5 MHz |
|||||
|
(NBindex,SCstart) |
(0,≤72) |
(0, ≥216) |
||||
|
Lcsc |
3,6 |
3,6 |
||||
|
AMPR [dB] |
≤[1] |
≤[1] |
||||
|
10 MHz |
||||||
|
(NBindex,SCstart) |
(0,≤60) |
(1,≤24) |
(3, ≥264) |
(4, ≥228) |
||
|
Lcsc |
3,6 |
3,6 |
3,6 |
3,6 |
||
|
AMPR [dB] |
≤[1] |
≤[1] |
≤[1] |
≤[1] |
||
|
NOTE 1: NBindex is the narrowband index that is defined in 6.2.7 in [4]. The resource block assignment is defined within the narrowband as defined in 5.3.3.1.12 and 5.3.3.1.13 in [5]. NOTE 2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB of NB indicated with NBindex. |
||||||
Table 6.2.4E-11: A-MPR for "NS_04" for Cat-M2 with sub-PRB allocation
|
BW [MHz] |
5MHz |
|
|
(NBindex,SCstart) |
(0,≤72) |
(0, ≥216) |
|
Lcsc |
≥2 |
|
|
AMPR [dB] |
≤[2] |
|
Table 6.2.4E-12: A-MPR for "NS_07" for Cat-M2 with sub-PRB allocation
|
BW [MHz] |
10 MHz |
||
|
(NBindex,SCstart) |
(0, <48) |
(0,48-84) |
(0, ≥240) |
|
Lcsc |
≥2 |
≥2 |
≥2 |
|
AMPR [dB] |
≤[12] |
≤[6] |
≤[14.5] |
|
(NBindex,SCstart) |
(1, <24) |
(1,24-72) |
(1, ≥264) |
|
Lcsc |
≥2 |
≥2 |
≥2 |
|
AMPR [dB] |
≤[12] |
≤[6] |
≤[14.5] |
|
(NBindex,SCstart) |
(2, <60) |
(2, ≥252) |
|
|
Lcsc |
≥2 |
≥2 |
|
|
AMPR [dB] |
≤[6] |
≤[1.5] |
|
|
(NBindex,SCstart) |
(3, <48) |
(3, ≥216) |
|
|
Lcsc |
≥2 |
≥2 |
|
|
AMPR [dB] |
≤[6] |
≤[1.5] |
|
|
(NBindex,SCstart) |
(4, <36) |
(4, ≥192) |
|
|
Lcsc |
≥2 |
≥2 |
|
|
AMPR [dB] |
≤[3] |
≤[1.5] |
|
Table 6.2.4E-13: A-MPR for "NS_06" for Cat-M1 with sub-PRB allocation
|
BW [MHz] |
1.4 |
3 |
5 |
|
(NBindex,SCstart) |
(0, < 15) and (0, > 54) |
([0], < 15) |
([0], < 15) |
|
Lcsc |
[2] |
[2] |
[2] |
|
AMPR [dB] |
≤[0.5] |
≤[0.5] |
≤[0.5] |
|
NOTE 1: NBindex is the narrowband index that is defined in 6.2.7 in [4]. The resource block assignment is defined within the narrowband as defined in 5.3.3.1.12 and 5.3.3.1.13 in [5]. NOTE2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB of NB indicated with NBindex. |
|||
Table 6.2.4E-14: A-MPR for "NS_12" for Cat-M1 with sub-PRB allocation
|
Channel bandwidth [MHz] |
Parameters |
Region |
||
|
1.4 |
(NBindex,SCstart ) |
([0], ≤ [3]) |
([0], ≤ [3]) |
([0], ≤ [3]) |
|
Lcsc |
[2] |
[3] |
[6] |
|
|
A-MPR [dB] |
≤ [5] |
≤ [5] |
≤ [5] |
|
|
3 |
(NBindex,SCstart) |
([0], ≤ [3]) |
([0], ≤ [3]) |
([0], ≤ [3]) |
|
Lcsc |
[2] |
[3] |
[6] |
|
|
A-MPR [dB] |
≤ [5] |
≤ [5] |
≤ [5] |
|
|
5 |
(NBindex,SCstart) |
([0], ≤ [3]) |
([0], ≤ [3]) |
([0], ≤ [3]) |
|
Lcsc |
[2] |
[3] |
[6] |
|
|
A-MPR [dB] |
≤ [5] |
≤ [5] |
≤ [5] |
|
Table 6.2.4E-15: A-MPR for "NS_35" for Cat-M1 with sub-PRB allocation
|
BW [MHz] |
5 |
|
(NBindex,SCstart) |
([0], [0]) |
|
Lcsc |
[2] |
|
AMPR [dB] |
≤ [0.5] |
|
NOTE 1: NBindex is the narrowband index that is defined in 6.2.7 in [4]. The resource block assignment is defined within the narrowband as defined in 5.3.3.1.12 and 5.3.3.1.13 in [5]. NOTE2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB of NB indicated with NBindex. |
|
Table 6.2.4E-16: A-MPR for "NS_38" for Cat-M1 with sub-PRB allocation for E-UTRA lowest channel edge > 1427 MHz and ≤ 1447 MHz
|
Channel bandwidth [MHz] |
Parameters |
Region |
|||||
|
1.4 |
(NBindex,SCstart) |
([0], < 27) |
([0], > 51) |
||||
|
Lcsc |
2,3,6 |
[3] |
|||||
|
A-MPR [dB] |
≤ [7] |
≤ [1] |
|||||
|
3 |
(NBindex,SCstart) |
([0], < 21) |
([0], > 60) |
||||
|
Lcsc |
2,3,6 |
2,3,6 |
|||||
|
A-MPR [dB] |
≤ [7] |
≤ [1] |
|||||
|
5 |
(NBindex,SCstart) |
([0], < 21) |
([0], > 60) |
||||
|
Lcsc |
[2] |
[2] |
|||||
|
A-MPR [dB] |
≤ [7] |
≤ [1] |
|||||
|
10 |
(NBindex,SCstart) |
(0, < 15) |
|||||
|
Lcsc |
2,3,6 |
||||||
|
A-MPR [dB] |
≤ [7] |
||||||
|
15 |
(NBindex,SCstart) |
(0, < 12) |
|||||
|
Lcsc |
2,3,6 |
||||||
|
A-MPR [dB] |
≤ [7] |
||||||
Table 6.2.4E-17: A-MPR for "NS_05" for Cat-M2 with sub-PRB allocation
|
BW [MHz] |
5 |
10 |
15 |
20 |
||||
|
(WBindex,SCstart) |
(0,≤36) |
(0, ≤6) |
(0,≤30) |
(0,≤12) |
(0,≤24) |
(0,≤12) |
(0,0) |
(0,0) |
|
Lcsc |
2 |
6 |
2 |
6 |
2 |
6 |
2 |
3 |
|
AMPR [dB] |
≤[1.5] |
≤ [0.5] |
≤[1.5] |
≤[0.5] |
≤[1.5] |
≤[0.5] |
≤[1.5] |
≤[0.5] |
|
NOTE 1: WBindex is the wideband index that is defined in [4]. NOTE2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB indicated with WBindex |
||||||||
Table 6.2.4E-18: A-MPR for "NS_06" for Cat-M2 with sub-PRB allocation
|
BW [MHz] |
5 MHz |
|||||
|
(NBindex,SCstart) |
(0,≤72) |
(0, ≥216) |
||||
|
Lcsc |
3,6 |
3,6 |
||||
|
AMPR [dB] |
≤[1] |
≤[1] |
||||
|
10 MHz |
||||||
|
(NBindex,SCstart) |
(0,≤60) |
(1,≤24) |
(3, ≥264) |
(4, ≥228) |
||
|
Lcsc |
3,6 |
3,6 |
3,6 |
3,6 |
||
|
AMPR [dB] |
≤[1] |
≤[1] |
≤[1] |
≤[1] |
||
|
NOTE 1: NBindex is the narrowband index that is defined in 6.2.7 in [4]. The resource block assignment is defined within the narrowband as defined in 5.3.3.1.12 and 5.3.3.1.13 in [5]. NOTE 2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB of NB indicated with NBindex. |
||||||
Table 6.2.4E-19: A-MPR for "NS_12" for Cat-M2 with sub-PRB allocation for E-UTRA lower channel edge >= 814.2 MHz and ≤ 829.2 MHz
|
BW [MHz] |
5 MHz |
|
(WBindex,SCstart) |
(0, <84) |
|
Lcsc |
≥2 |
|
AMPR [dB] |
≤[5] |
|
BW [MHz] |
10 MHz |
|
(WBindex,SCstart) |
(0, <72) |
|
Lcsc |
≥2 |
|
AMPR [dB] |
≤[5] |
|
BW [MHz] |
15 MHz |
|
(WBindex,SCstart) |
(0, <66) |
|
Lcsc |
≥2 |
|
AMPR [dB] |
≤[5] |
|
NOTE 1: NBindex is the narrowband index that is defined in 6.2.7 in [4]. The resource block assignment is defined within the narrowband as defined in 5.3.3.1.12 and 5.3.3.1.13 in [5]. NOTE 2: WBindex is the wideband index that is defined in [4]. NOTE 3: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB indicated with NBindex or WBindex |
|
Table 6.2.4E-20: A-MPR for "NS_13" for Cat-M2 with sub-PRB allocation for E-UTRA lower channel edge >= 819 MHz and ≤ 824 MHz
|
BW [MHz] |
5 |
|
|
(WBindex,SCstart) |
(0, <30) |
(0, <30) |
|
Lcsc |
2 |
3,6 |
|
AMPR [dB] |
≤[3] |
≤[5] |
|
NOTE 1: WBindex is the wideband index that is defined in [4]. NOTE 2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB indicated with WBindex |
||
Table 6.2.4E-21: A-MPR for "NS_15" for Cat-M2 with sub-PRB allocation for E-UTRA highest channel edge > 834 MHz and ≤ 849 MHz
|
BW [MHz] |
5 MHz |
|||||
|
(WBindex,SCstart) |
(0, <54) |
(0, <54) |
(0, <54) |
(0, 200-234) |
(0, >234) |
(0, >234) |
|
Lcsc |
2 |
3 |
6 |
≥2 |
2,3 |
6 |
|
AMPR [dB] |
≤[10.5] |
≤[8.5] |
≤[5.5] |
≤[3.5] |
≤[10] |
≤[9] |
|
BW [MHz] |
10 MHz |
|||||
|
(WBindex,SCstart) |
(1, <48) |
(1, <48) |
(1, <48) |
(1, 200-234) |
(1, >234) |
(1, >234) |
|
Lcsc |
2 |
3 |
6 |
≥2 |
2,3 |
6 |
|
AMPR [dB] |
≤[10.5] |
≤[8.5] |
≤[5.5] |
≤[3.5] |
≤[10] |
≤[9] |
|
BW [MHz] |
15 MHz |
|||||
|
(WBindex,SCstart) |
(2, <48) |
(2, <48) |
(2, <48) |
(2, 200-234) |
(2, >234) |
(2, >234) |
|
Lcsc |
2 |
3 |
6 |
≥2 |
2,3 |
6 |
|
AMPR [dB] |
≤[10.5] |
≤[8.5] |
≤[5.5] |
≤[3.5] |
≤[10] |
≤[9] |
|
NOTE 1: WBindex is the wideband index that is defined in [4]. NOTE 2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB indicated with WBindex |
||||||
Table 6.2.4E-22: A-MPR for "NS_16" for Cat-M2 with sub-PRB allocation for E-UTRA lowest channel edge > 807 MHz and ≤ 812 MHz
|
BW [MHz] |
5 MHz |
|
(WBindex,SCstart) |
(0, <6) |
|
Lcsc |
2 |
|
AMPR [dB] |
≤[7] |
|
NOTE 1: WBindex is the wideband index that is defined in [4]. NOTE 2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB indicated with WBindex |
|
Table 6.2.4E-23: A-MPR for “NS_07” for Cat-M1 with sub-PRB allocation
|
BW [MHz] |
10 |
|
(NBindex,SCstart) |
(0, < 9) |
|
Lcsc |
2 |
|
AMPR [dB] |
≤ 0.5 |
|
NOTE 1: NBindex is the narrowband index that is defined in 6.2.7 in [4]. The resource block assignment is defined within the narrowband as defined in 5.3.3.1.12 and 5.3.3.1.13 in [5]. NOTE 2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB of NB indicated with NBindex. |
|
Table 6.2.4E-24: A-MPR for “NS_38” for Cat-M2 with sub-PRB allocation for E-UTRA lowest channel edge > 1427 MHz and ≤ 1447 MHz
|
Channel bandwidth [MHz] |
Parameters |
Region |
||||
|
3 |
(NBindex,SCstart ) |
(0, 0-27) |
(0, 30-42) |
(0, 45-51) |
(0, 96-120) |
(0, 123-168) |
|
Lcsc |
2,3 ,6 |
2,3 ,6 |
2,3 ,6 |
2,3 ,6 |
2,3 ,6 |
|
|
A-MPR [dB] |
≤ [16] |
≤ [13] |
≤ [10] |
≤ [7] |
≤ [3] |
|
|
5 |
(WBindex,SCstart ) |
(0, < 96) |
(0, > 219) |
|||
|
Lcsc |
2,3,6 |
2,3,6 |
||||
|
A-MPR [dB] |
≤ [7] |
≤ [1] |
||||
|
10 |
(WBindex,SCstart ) |
(0, < 93) |
(0, > 219) |
|||
|
Lcsc |
2,3,6 |
2,3,6 |
||||
|
A-MPR [dB] |
≤ [7] |
≤ [1] |
||||
|
15 |
(WBindex,SCstart ) |
(0, < 87) |
(0, > 234) |
|||
|
Lcsc |
2,3,6 |
2,3,6 |
||||
|
A-MPR [dB] |
≤ [7] |
≤ [1] |
||||
|
20 |
(WBindex,SCstart ) |
(0, < 81) |
(0, > 234) |
|||
|
Lcsc |
2,3,6 |
2,3,6 |
||||
|
A-MPR [dB] |
≤ [7] |
≤ [1] |
||||
Table 6.2.4E-25: A-MPR for “NS_56” for Cat-M1 allocation
|
Channel bandwidth |
Carrier centre frequency (FC) (MHz) |
Parameters |
Region |
||||||
|
5 MHz |
1630.0, 1630.3 |
RBstart |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
|
LCRB [RBs] |
≤6 |
≤5 |
≤4 |
≤3 |
≤2 |
=1 |
≤2 |
||
|
A-MPR [dB] |
≤13 |
≤9 |
≤7 |
≤5 |
≤3 |
≤3 |
0.3 |
||
|
1635 |
No A-MPR needed |
||||||||
|
1649 |
|||||||||
|
1654 |
|||||||||
|
10 MHz |
1632.5 |
(RBstart) |
0 |
1 |
2 |
3 |
4 |
5 |
|
|
LCRB [RBs] |
≤6 |
≤5 |
≤4 |
≤3 |
≤2 |
=1 |
|||
|
A-MPR [dB] |
≤8 |
≤4 |
≤3 |
≤2 |
≤2 |
≤1.5 |
|||
|
1651.5 |
No A-MPR needed |
||||||||
|
Note 1: RBstart indicates the lowest RB index of transmitted resource blocks of the cell channel bandwidth. Note 2: LCRB is the length of a contiguous resource block allocation Note 3: For intra-subframe frequency hopping which intersects regions, notes 1 and 2 apply on a per slot basis Note 4: For intra-subframe frequency hopping which intersects regions, the larger A-MPR value may be applied for both slots in the subframe |
|||||||||
Table 6.2.4E-26: A-MPR for “NS_56” for Cat-M1 allocation with subPRB
|
Channel BW |
Carrier centre freq. (FC) (MHz) |
Parameter |
Region |
|||||||||||||||||||||
|
5 MHz |
1630.0, 1630.3 |
(RBstart, SCstart) |
(0, ≤10) |
(1, ≤22) |
(2, ≤34) |
(3, ≤47) |
(4, ≤59) |
(5, ≤71) |
(0, ≤6) |
(1, ≤18) |
(2, ≤30) |
(3, ≤42) |
(4, ≤54) |
(5, ≤66) |
||||||||||
|
Lcsc |
2,3 |
2,3 |
2,3 |
2,3 |
2,3 |
2,3 |
6 |
6 |
6 |
6 |
6 |
6 |
||||||||||||
|
A-MPR [dB] |
≤15 |
≤11 |
≤8 |
≤6 |
≤3.5 |
≤2.5 |
≤13 |
≤10 |
≤7 |
≤5 |
≤3 |
2 |
||||||||||||
|
1635 |
No A-MPR needed |
|||||||||||||||||||||||
|
1649 |
||||||||||||||||||||||||
|
1654 |
||||||||||||||||||||||||
|
10 MHz |
1632.5 |
(RBstart, SCstart) |
(1, ≤10) |
(2, ≤22) |
(3, ≤34) |
(4, ≤45) |
(5, ≤56) |
(0, ≤6) |
(1, ≤18) |
(2, ≤30) |
(3, ≤42) |
(4, ≤54) |
(5, ≤66) |
|||||||||||
|
Lcsc |
2,3 |
2,3 |
2,3 |
2,3 |
2,3 |
6 |
6 |
6 |
6 |
6 |
6 |
|||||||||||||
|
A-MPR [dB] |
≤7 |
≤5 |
≤3 |
≤2.5 |
≤2 |
≤8 |
≤6 |
≤4 |
≤2.5 |
≤2 |
≤1.5 |
|||||||||||||
|
1651.5 |
No A-MPR needed |
|||||||||||||||||||||||
|
Note 1: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB of NB indicated with NBindex. Note2: For NBindices other than 0, no A-MPR is required. |
||||||||||||||||||||||||
Table 6.2.4E-27: A-MPR for “NS_56” for Cat-M2 allocation with subPRB
|
Channel BW |
Carrier centre freq. (FC) (MHz) |
Parameter |
Region |
||||||||
|
5 MHz |
1630.0, 1630.3 |
(WBindex, SCstart) |
(0, <=3) |
(0, <=27) |
(0, =66) |
(0, =93) |
(0, =0) |
(0, <= 18) |
(0, =24) |
(0, <=42) |
(0, =66) |
|
Lcsc |
2,3 |
2,3 |
2,3 |
2,3 |
6 |
6 |
6 |
6 |
6 |
||
|
A-MPR [dB] |
≤4.5 |
≤4 |
≤5 |
≤4 |
≤4.5 |
≤3.5 |
≤2.5 |
≤1.5 |
≤1.5 |
||
|
1635 |
No A-MPR needed |
||||||||||
|
1649 |
|||||||||||
|
1654 |
|||||||||||
|
10 MHz |
1632.5 |
(WBindex, SCstart) |
(0, <=12) |
(0, <=12) |
(0, =48) |
(0, <=6) |
(0, =12) |
(0, <=30) |
N/A |
N/A |
N/A |
|
Lcsc |
2 |
3 |
3 |
6 |
6 |
6 |
N/A |
N/A |
N/A |
||
|
A-MPR [dB] |
≤4 |
≤2 |
≤2 |
≤3 |
≤1 |
≤1.5 |
N/A |
N/A |
N/A |
||
|
1651.5 |
No A-MPR needed |
||||||||||
|
Note 1: WBindex is the wideband index that is defined in [4]. |
|||||||||||
|
Note 2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB of NB indicated with NBindex. |
|||||||||||
Table 6.2.4E-28: A-MPR for “NS_27” for Cat-M1 allocation with subPRB allocation
|
Channel BW |
Parameter |
Region |
|||||||
|
5 MHz |
(NB_index, SCstart) |
(0, ≤4) |
(0, ≤72) |
(3, >=48) |
(3, >=60) |
(0, ≤14) |
(0, ≤72) |
(3, >=48) |
(3, >=60) |
|
Lcsc |
2,3 |
2,3 |
2,3 |
2,3 |
6 |
6 |
6 |
6 |
|
|
A-MPR [dB] |
≤3 |
≤1 |
≤1 |
≤3 |
≤2 |
≤1 |
≤1 |
≤2 |
|
|
Note 1: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB of NB indicated with NBindex. Note 2: Lcsc is the length of the continuous subcarrier, SCstart is the subcarrier offset relative to the first subcarrier of the first PRB of NB indicated with NBindex. |
|||||||||
No other A-MPR requirement than those specified in table 6.2.4E-1, table 6.2.4E-2, table 6.2.4E-6 and table 6.2.4E-7 applies to category M1 and M2 UE.