8.2.80 Failed Rule ID
29.2443GPPInterface between the Control Plane and the User Plane nodesRelease 17TS
The Failed Rule ID IE type shall be encoded as shown in Figure 8.2.80-1. It shall identify the Rule which failed to be created or modified.
|
Bits |
||||||||||
|
Octets |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
||
|
1 to 2 |
Type = 114 (decimal) |
|||||||||
|
3 to 4 |
Length = n |
|||||||||
|
5 |
Spare |
Rule ID Type |
||||||||
|
6 to p |
Rule ID value |
|||||||||
|
(p+1) to (n+4) |
These octet(s) is/are present only if explicitly specified |
|||||||||
Figure 8.2.80-1: Failed Rule ID
The Rule ID Type shall be encoded as a 5 bits binary integer value as specified in Table 8.2.80-1.
Table 8.2.80-1: Rule ID Type
|
Rule ID Type |
Value (Decimal) |
|
PDR |
0 |
|
FAR |
1 |
|
QER |
2 |
|
URR |
3 |
|
BAR |
4 |
|
MAR |
5 |
|
SRR |
6 |
|
For future use. Shall not be sent. If received, shall be interpreted as the value "1". |
7 to 31 |
The length and the value of the Rule ID value field shall be set as specified for the PDR ID, FAR ID, QER ID, URR ID , BAR ID, MAR ID and SRR ID IE types respectively.