8.2.215 PFCPSDRsp-Flags
29.2443GPPInterface between the Control Plane and the User Plane nodesRelease 17TS
The PFCPSDRsp-Flags IE indicates flags applicable to the PFCP Session Report Response message. It is coded as depicted in Figure8.2.215-1.
|
Bits |
||||||||||
|
Octets |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
||
|
1 to 2 |
Type = 318 (decimal) |
|||||||||
|
3 to 4 |
Length = n |
|||||||||
|
5 |
Spare |
Spare |
Spare |
Spare |
Spare |
Spare |
Spare |
PURU |
||
|
6 to (n+4) |
These octet(s) is/are present only if explicitly specified |
|||||||||
Figure 8.2.215-1: PFCPSDRsp-Flags
The following bits within Octet 5 shall indicate:
– Bit 1 – PURU (Pending Usage Reports Unacknowledged): if this bit is set to "1", it indicates that there are pending PFCP Session Report Request messages which have not been acknowledged yet.
– Bit 2 to 8 – Spare, for future use, shall be set to "0" by the sender and discarded by the receiver.