8.2.78 Graceful Release Period
29.2443GPPInterface between the Control Plane and the User Plane nodesRelease 17TS
The purpose of the Graceful Release Period IE is to specify a specific time for a graceful release. The Graceful Release Period IE shall be encoded as shown in Figure 8.2.78-1 and table 8.2.78.1.
|
Bits |
||||||||||
|
Octets |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
||
|
1 to 2 |
Type = 112 (decimal) |
|||||||||
|
3 to 4 |
Length = n |
|||||||||
|
5 |
Timer unit |
Timer value |
||||||||
|
6 to (n+4) |
These octet(s) is/are present only if explicitly specified |
|||||||||
Figure 8.2.78-1: Graceful Release Period
Table 8.2.78.1: Graceful Release Period information element
|
Timer value Bits 5 to 1 represent the binary coded timer value. Timer unit Bits 6 to 8 defines the timer value unit for the timer as follows: Bits 8 7 6 0 0 0 value is incremented in multiples of 2 seconds 0 0 1 value is incremented in multiples of 1 minute 0 1 0 value is incremented in multiples of 10 minutes 0 1 1 value is incremented in multiples of 1 hour 1 0 0 value is incremented in multiples of 10 hours 1 1 1 value indicates that the timer is infinite Other values shall be interpreted as multiples of 1 minute in this version of the protocol. Timer unit and Timer value both set to all "zeros" shall be interpreted as an indication that the timer is stopped. |