8.2.53 End Time
29.2443GPPInterface between the Control Plane and the User Plane nodesRelease 17TS
The End Time IE indicates the time at which the UP function ended to collect the charging information. It shall be encoded as shown in Figure 8.2.53-1.
|
Bits |
||||||||||
|
Octets |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
||
|
1 to 2 |
Type = 76 (decimal) |
|||||||||
|
3 to 4 |
Length = n |
|||||||||
|
5 to 8 |
End Time |
|||||||||
|
9 to (n+4) |
These octet(s) is/are present only if explicitly specified |
|||||||||
Figure 8.2.53-1: End Time
The End Time field shall contain a UTC time. Octets 5 to 8 shall be encoded in the same format as the first four octets of the 64-bit timestamp format as defined in clause 6 of IETF RFC 5905 [12].
NOTE: The encoding is defined as the time in seconds relative to 00:00:00 on 1 January 1900.