8.2.204 Reporting Flags
29.2443GPPInterface between the Control Plane and the User Plane nodesRelease 17TS
The Reporting Flags IE indicates flags providing additional information for direct event notification reporting. It is coded as depicted in Figure 8.2.204-1.
|
Bits |
||||||||||
|
Octets |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
||
|
1 to 2 |
Type = 298 (decimal) |
|||||||||
|
3 to 4 |
Length = n |
|||||||||
|
5 |
Spare |
Spare |
Spare |
Spare |
Spare |
Spare |
Spare |
DUPL |
||
|
6 to (n+4) |
These octet(s) is/are present only if explicitly specified |
|||||||||
Figure 8.2.204-1: Reporting Flags
The following bits within Octet 5 shall indicate:
– Bit 1 – DUPL (Duplicated notification): if this bit is set to "1", it indicates that the UP function shall also report the event notifications over N4 (in addition to reporting them directly to the Event Notification URI).
– Bit 2 to 8 – Spare, for future use, shall be set to"0" by the sender and discarded by the receiver.