8.2.199 CP IP Address
29.2443GPPInterface between the Control Plane and the User Plane nodesRelease 17TS
The CP IP Address IE shall contain an IPv4 and/or IPv6 address. It shall be encoded as shown in Figure 8.2.199-1.
|
Bits |
||||||||||
|
Octets |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
||
|
1 to 2 |
Type = 292 (decimal) |
|||||||||
|
3 to 4 |
Length = n |
|||||||||
|
5 |
Spare |
V4 |
V6 |
|||||||
|
p to (p+3) |
IPv4 Address |
|||||||||
|
q to (q+15) |
IPv6 Address |
|||||||||
Figure 8.2.199-1: CP IP Address
The following flags are coded within Octet 5:
– Bit 1 – V6: If this bit is set to "1", then the IPv6 address field shall be present in the CP IP Address, otherwise the IPv6 address field shall not be present.
– Bit 2 – V4: If this bit is set to "1", then the IPv4 address field shall be present in the CP IP Address, otherwise the IPv4 address field shall not be present.
– Bit 3 to 8 Spare, for future use and set to "0".
Octets "p to (p+3)" or "q to (q+15)" (IPv4 address / IPv6 address fields), if present, shall contain the address value.