8.2.178 PFCPASReq-Flags
29.2443GPPInterface between the Control Plane and the User Plane nodesRelease 17TS
The PFCPASReq-Flags IE indicates flags applicable to the PFCP Association Setup Request message. It is coded as depicted in Figure 8.2.178-1.
|
Bits |
||||||||||
|
Octets |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
||
|
1 to 2 |
Type = 259 (decimal) |
|||||||||
|
3 to 4 |
Length = n |
|||||||||
|
5 |
Spare |
UUPSI |
||||||||
|
6 to (n+4) |
These octet(s) is/are present only if explicitly specified |
|||||||||
Figure 8.2.178: PFCPASReq-Flags
The following bits within Octet 5 shall indicate:
– Bit 1 – UUPSI (UPF configured for IPUPS Indication): if this bit is set to "1", it indicates that the UPF is configured to be used for IPUPS. See clause 5.27.
– Bit 2 to 8 – Spare, for future use, shall be set to "0" by the sender and discarded by the receiver.