8.2.168 Reporting Frequency
29.2443GPPInterface between the Control Plane and the User Plane nodesRelease 17TS
The Reporting Frequency IE shall be encoded as shown in Figure 8.2.168-1. It indicates the frequency for the UP function to send a QoS Monitoring report to the CP function.
|
Bits |
||||||||||
|
Octets |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
||
|
1 to 2 |
Type = 244 (decimal) |
|||||||||
|
3 to 4 |
Length = n |
|||||||||
|
5 |
Spare |
SESRL |
PERIO |
EVETT |
||||||
|
6 to (n+4) |
These octet(s) is/are present only if explicitly specified |
|||||||||
Figure 8.2.19-1: Reporting Frequency
Octet 5 shall be encoded as follows:
– Bit 1 – EVETT (Event Triggered QoS monitoring reporting): when set to "1", this indicates the delay for QoS monitoring is reported when the delay exceeds a threshold.
– Bit 2 – PERIO (Periodic QoS monitoring reporting): when set to "1", this indicates the delay for QoS monitoring is reported periodicly.
– Bit 3 – SESRL (Session Released QoS monitoring reporting): when set to "1", this indicates the delay for QoS monitoring is reported when the PDU session is released.
– Bits 4 to 8: Spare, for future use and set to "0".
At least one bit shall be set to "1". Several bits may be set to "1".