8.2.167 Requested Qos Monitoring
29.2443GPPInterface between the Control Plane and the User Plane nodesRelease 17TS
The Requested Qos Monitoring IE shall be encoded as shown in Figure 8.2.167-1.
|
Bits |
||||||||||
|
Octets |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
||
|
1 to 2 |
Type = 243 (decimal) |
|||||||||
|
3 to 4 |
Length = n |
|||||||||
|
5 |
Spare |
GTPUPM |
RP |
UL |
DL |
|||||
|
6 to (n+4) |
These octet(s) is/are present only if explicitly specified |
|||||||||
Figure 8.2.167-1: Requested Qos Monitoring
Octet 5 shall be encoded as follows:
– Bit 1 – DL (Downlink): when set to "1", this indicates a request for measuring the downlink packet delay from the UPF (PSA) to the UE.
– Bit 2 – UL (Uplink): when set to "1", this indicates a request for measuring the uplink packet delay from the UE to the UPF (PSA).
– Bit 3 – RP (Round Trip): when set to "1", this indicates a request for measuring the round trip packet delay between the UPF (PSA) and UE.
– Bit 4 – GTPUPM (GTP-U Path Monitoring):
– when set to "1, this indicates that the Downlink, Uplink or Round Trip delay shall be measured by using GTP-U path monitoring, i.e. by the I-UPF reporting the one-way end to end accumulated transport delay in UL GTP-U packets towards the PSA; see clause 5.33.3.3 of 3GPP TS 23.501 [28];
– when set to "0", this indicates that the Downlink, Uplink or Round Trip delay shall be measured by using RAN and UPF time information in GTP-U packets; see clause 5.33.3.2 of 3GPP TS 23.501 [28].
– Bit 5 to 8: Spare, for future use and set to "0".
At least one bit shall be set to "1". Several bits may be set to "1".