8.5.88 Actions related to HS_SCCH_DRX_CELL_FACH_STATUS variable (FDD only)

25.3313GPPProtocol specificationRadio Resource Control (RRC)Release 17TS

The HS_SCCH_DRX_CELL_FACH_STATUS variable shall be set to TRUE only when all the following conditions are met:

1> the UE supports HS-SCCH DRX operation in CELL_FACH state; and

1> the UE is in CELL_FACH state or the UE after state transition enters CELL_FACH state; and

1> the UE has a dedicated H-RNTI configured; and

1> the IE "HS-SCCH DRX in CELL_FACH Information" has been included in the received message.

If any of the above conditions is not met and the HS_SCCH_DRX_CELL_FACH_STATUS variable is set to TRUE, the UE shall:

1> stop any ongoing HS-SCCH DRX operation in CELL_FACH state;

1> set the HS_SCCH_DRX_CELL_FACH_STATUS to FALSE;

1> stop the timer T333, if it is ongoing.

If the variable HS_SCCH_DRX_CELL_FACH_STATUS is set to TRUE the UE shall:

1> perform the actions as specified in 8.5.89.