10.3.5 Transport CH Information elements
25.3313GPPProtocol specificationRadio Resource Control (RRC)Release 17TS
10.3.5.1 Added or Reconfigured DL TrCH information
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
Downlink transport channel type |
MP |
Enumerated(DCH,DSCH |
Note 2 |
||
|
,HS-DSCH) |
Note 3 |
REL-5 |
|||
|
DL Transport channel identity |
MP |
Transport channel identity 10.3.5.18 |
|||
|
CV-not HS-DSCH |
REL-5 |
||||
|
CHOICE DL parameters |
|||||
|
>Explicit |
|||||
|
>>TFS |
MP |
Transport Format Set 10.3.5.23 |
|||
|
>SameAsUL |
|||||
|
>>Uplink transport channel type |
MP |
Enumerated(DCH,USCH) |
USCH is TDD only |
||
|
>>UL TrCH identity |
MP |
Transport channel identity 10.3.5.18 |
Same TFS applies as specified for indicated UL TrCH |
||
|
>HS-DSCH |
REL-5 |
||||
|
>>HARQ Info |
OP |
HARQ info 10.3.5.7a |
For 1.28 Mcps TDD, if HARQ Information is included in the IE DL MultiCarrier Information, this IE shall not be present. |
REL-5 |
|
|
>>CHOICE DL MAC header type |
OP |
REL-7 |
|||
|
>>>MAC-hs |
REL-7 |
||||
|
>>>>Added or reconfigured MAC-d flow |
MP |
Added or reconfigured MAC-d flow 10.3.5.1a |
REL-5 |
||
|
>>>MAC-ehs |
REL-7 |
||||
|
>>>>Added or reconfigured MAC-ehs reordering queue |
MP |
Added or reconfigured MAC-ehs reordering queue 10.3.5.1c |
REL-7 |
||
|
DCH quality target |
OP |
Quality target 10.3.5.10 |
|||
|
Note 1: Void |
|||||
|
Note 2: The IE "Downlink transport channel type" value "DSCH" should not be used for FDD. If received the UE behaviour is unspecified. |
|||||
|
Note 3: If included in SIB type 16, the value ‘HS-DSCH’ does not apply for the IE "Downlink transport channel type". |
|||||
|
Condition |
Explanation |
|
NotHS-DSCH |
If the downlink transport channel type is DCH or DSCH then this IE is mandatory otherwise it is not needed. |
10.3.5.1a Added or reconfigured MAC-d flow
This IE is used in relation to the MAC-d flows mapped to the HS-DSCH transport channel.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
MAC-hs queue to add or reconfigure list |
OP |
<1 to maxQueueID> |
REL-5 |
||
|
>MAC-hs queue Id |
MP |
Integer(0..7) |
The MAC-hs queue ID is unique across all MAC-d flows. |
REL-5 |
|
|
>MAC-d Flow Identity |
MP |
MAC-d Flow Identity 10.3.5.7c |
REL-5 |
||
|
>T1 |
MP |
Integer(10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 120, 140, 160, 200, 300, 400) |
Timer (in milliseconds) when PDUs are released to the upper layers even though there are outstanding PDUs with lower TSN values. |
REL-5 |
|
|
>MAC-hs window size |
MP |
Integer(4, 6, 8, 12, 16, 24, 32) |
REL-5 |
||
|
Integer(32, 64, 96, 128, 160, 192, 256) |
The set of values is used for Multi-carrier case in 1.28 Mcps TDD mode for 9bits TSN option. |
REL-7 |
|||
|
>MAC-d PDU size Info |
OP |
<1 to max MACdPDUsizes> |
Mapping of the different MAC-d PDU sizes configured for the HS-DSCH to the MAC-d PDU size index in the MAC-hs header. |
REL-5 |
|
|
>>MAC-d PDU size |
MP |
Integer (1..5000) |
REL-5 |
||
|
>>MAC-d PDU size index |
MP |
Integer(0..7) |
REL-5 |
||
|
MAC-hs queue to delete list |
OP |
<1 to maxQueueID> |
REL-5 |
||
|
>MAC-hs queue Id |
MP |
Integer(0..7) |
The MAC-hs queue ID is unique across all MAC-d flows. |
REL-5 |
10.3.5.1b Added or reconfigured E-DCH MAC-d flow
This IE is used in relation to MAC-d flows mapped to the E-DCH transport channel.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
E-DCH MAC-d flow identity |
MP |
E-DCH MAC-d flow identity 10.3.5.7e |
REL-6 |
||
|
E-DCH MAC-d flow power offset |
OP |
Integer(0..6) |
Only allowed to be absent when already defined for this E-DCH MAC-d flow, unit is dB |
REL-6 |
|
|
E-DCH MAC-d flow maximum number of retransmissions |
OP |
Integer (0..15) |
Only allowed to be absent when already defined for this E-DCH MAC-d flow |
REL-6 |
|
|
E-DCH MAC-d flow retransmission timer |
CV-Tdd128 |
Enumerated (10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100, 110, 120, 140, 160, 200, 240, 280, 320, 400, 480, 560) |
Unit: ms |
REL-7 |
|
|
E-DCH MAC-d flow multiplexing list |
OP |
Bitstring (maxE-DCHMACdFlow) |
Indicates, if this is the first MAC-d flow for which PDUs are placed in the MAC-e or MAC-i PDU, the other MAC-d flows from which MAC-d PDUs are allowed to be included in the same MAC-e or MAC-i PDU. Bit 0 is for MAC-d flow 0, Bit 1 is for MAC-d flow 1, … Value ‘1’ for a bit means multiplexing is allowed. Bit 0 is the first/leftmost bit of the bit string. NOTE: The bit that corresponds to the MAC-d flow itself is ignored. |
REL-6 |
|
|
CHOICE transmission grant type |
OP |
Only allowed to be absent when already defined for this E-DCH MAC-d flow |
REL-6 |
||
|
>Non-scheduled transmission grant info |
REL-6 |
||||
|
>>CHOICE mode |
MP |
REL-7 |
|||
|
>>>FDD |
REL-7 |
||||
|
>>>>Max MAC-e PDU contents size |
MP |
Integer (1..19982) |
REL-6 |
||
|
>>>>2ms non-scheduled transmission grant HARQ process allocation |
MD |
Bitstring (8) |
MAC-d PDUs for this MAC-d flow are only allowed to be transmitted in those processes for which the bit is set to “1”. Bit 0 corresponds to HARQ process 0, bit 1 corresponds to HARQ process 1,… Default value is: transmission in all HARQ processes is allowed. Bit 0 is the first/leftmost bit of the bit string. |
REL-6 |
|
|
>>>TDD |
NULL |
No data |
REL-7 |
||
|
>Scheduled transmission grant info |
NULL |
REL-6 |
|
Condition |
Explanation |
|
Tdd128 |
This IE is mandatory present for 1.28Mcps TDD, otherwise it is not needed. |
10.3.5.1c Added or reconfigured MAC-ehs reordering queue
This IE is used in relation to the MAC-ehs reordering queues mapped to the HS-DSCH transport channel.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
MAC-ehs queue to add or reconfigure list |
OP |
<1 to maxQueueID> |
REL-7 |
||
|
>MAC-ehs queue Id |
MP |
MAC-ehs Queue Id 10.3.5.7f |
REL-7 |
||
|
>T1 |
MP |
Integer (10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 120, 140, 160, 200, 300, 400) |
Timer (in milliseconds) when PDUs are released to the upper layers even though there are outstanding PDUs with lower TSN values. |
REL-7 |
|
|
>Treset |
MD |
Integer (1, 2, 3, 4) |
Timer in multiples of T1 values (milliseconds). Used when MAC-ehs reordering queue is reset in CELL_FACH and CELL_PCH (FDD only). |
REL-7 |
|
|
>MAC-ehs window size |
MP |
Enumerated (4, 6, 8, 12, 16, 24, 32, |
Six spare values are needed. |
REL-7 |
|
|
64, 128, |
REL-9 |
||||
|
256) |
REL-11 |
||||
|
>MAC-ehs window size extension |
OP |
Enumerated(96,160,196,256) |
For 1,28Mcps TDD only, The set of values is used for Multi-carrier case for 9bits TSN option. If this IE is present, UE should ignore the IE "MAC-ehs window size" |
REL-9 |
10.3.5.2 Added or Reconfigured UL TrCH information
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
Uplink transport channel type |
MP |
Enumerated(DCH,USCH |
USCH is TDD only |
||
|
,E-DCH) |
Note 1 |
REL-6 |
|||
|
UL Transport channel identity |
MP |
Transport channel identity 10.3.5.18 |
|||
|
CV-NotE-DCH |
REL-6 |
||||
|
CHOICE UL parameters |
REL-6 |
||||
|
>DCH,USCH |
REL-6 |
||||
|
>>TFS |
MP |
Transport Format Set 10.3.5.23 |
|||
|
>E-DCH |
REL-6 |
||||
|
>>UL MAC header type |
OP |
Enumerated (MAC-i/is) |
If this IE is present, MAC-i/is header type [15] is used, else MAC-e/es header type [15] is used. |
REL-8 |
|
|
>>CHOICE mode |
MP |
REL-7 |
|||
|
>>>FDD |
REL-7 |
||||
|
>>>>E-DCH Transmission Time Interval |
MP |
Enumerated(2,10) |
Unit is ms. |
REL-6 |
|
|
>>>>E-DCH Transmission Time Interval for secondary UL frequency |
CV-RBReconfig |
Enumerated(2,10) |
Unit is ms. |
REL-14 |
|
|
>>>TDD |
No data |
REL-7 |
|||
|
>>HARQ info for E-DCH |
MP |
HARQ Info for E-DCH 10.3.5.7d |
REL-6 |
||
|
>>Added or reconfigured E-DCH MAC-d flow list |
OP |
<1 to maxE-DCHMACdFlow> |
REL-6 |
||
|
>>>Added or reconfigured E-DCH MAC-d flow |
MP |
Added or reconfigured E-DCH MAC-d flow 10.3.5.1b |
REL-6 |
||
|
Note 1: If included in System Information Block Type 16, the values ‘E-DCH’ does not apply for the IE "Uplink transport channel type". |
|||||
|
Condition |
Explanation |
|
NotE-DCH |
If the uplink transport channel type is DCH or USCH then this IE is mandatory otherwise it is not needed. |
|
RBReconfig |
This IE is optionally present in the RADIO BEARER RECONFIGURATION message. Otherwise it is not needed. |
NOTE: This information element is included within IE "Predefined RB configuration".
10.3.5.2a Additional Dynamic Transport Format Information for CCCH
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
RLC Size |
MP |
Integer (48..4968) |
Unit is bits For FDD, values are restricted to: Integer (48..296 by step of 8, 312..1320 by step of 16, 1384..4968 by step of 64) |
Rel-6 |
|
|
Number of Transport blocks |
MP |
Integer (1) |
NOTE 1 |
Rel-6 |
NOTE 1: The "Integer (1)" type does not result in bits in the transfer syntax and is not needed in the ASN.1.
10.3.5.2b Additional RACH TFCS for CCCH
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
Power offset Information |
MP |
Power Offset Information 10.3.5.8 |
The actual TFCS is specified in 8.6.5.12a |
Rel-6 |
10.3.5.3 Void
10.3.5.3a Common MAC-ehs reordering queue list
NOTE: For FDD and 1.28 Mcps TDD only.
This IE is defines common MAC-ehs priority queue parameters, which can be used for CCCH and SRB1 reception.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
MAC-ehs queue to configure list |
MP |
<1 to maxCommonQueueID> |
REL-7 |
||
|
>MAC-ehs queue Id |
MP |
MAC-ehs Queue Id 10.3.5.7f |
REL-7 |
||
|
>T1 |
MP |
Integer (10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 120, 140, 160, 200, 300, 400) |
Timer (in milliseconds) when PDUs are released to the upper layers even though there are outstanding PDUs with lower TSN values. |
REL-7 |
|
|
>Treset |
MD |
Integer (1, 2, 3, 4) |
Timer in multiples of T1 values (milliseconds). Used when MAC-ehs reordering queue is reset in CELL_FACH and CELL_PCH (FDD and 1.28 Mcps TDD only). |
REL-7 |
|
|
>MAC-ehs window size |
MP |
Integer (4, 6, 8, 12, 16, 24, 32) |
REL-7 |
10.3.5.3b Common E-DCH MAC-d flows
This IE is used in relation to MAC-d and MAC-c (for FDD) flows mapped to the E-DCH transport channels.
NOTE: Only for FDD and 1.28 Mcps TDD.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
Configured E-DCH MAC-d flow list |
MP |
1 to <maxE-DCHMACdFlow> |
REL-8 |
||
|
>E-DCH MAC-d flow identity |
MP |
E-DCH MAC-d Flow Identity 10.3.5.7e |
NOTE 1 |
REL-8 |
|
|
>E-DCH MAC-d flow power offset |
MP |
Integer(0..6) |
REL-8 |
||
|
>E-DCH MAC-d flow maximum number of retransmissions |
MP |
Integer (0..15) |
REL-8 |
||
|
>E-DCH MAC-d flow multiplexing list |
CV-NotCCCHFDD |
Bitstring (maxE-DCHMACdFlow) |
Indicates, if this is the first MAC-d flow for which PDUs are placed in the MAC-i PDU, the other MAC-d flows from which MAC-d PDUs are allowed to be included in the same MAC-i PDU. Bit 0 is for MAC-d flow 0, Bit 1 is for MAC-d flow 1, … Value ‘1’ for a bit means multiplexing is allowed. Bit 0 is the first/leftmost bit of the bit string. NOTE: The bit that corresponds to the MAC-d flow itself is ignored. |
REL-8 |
|
|
>E-DCH MAC-d flow retransmission timer |
CV-Tdd128 |
Enumerated (10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100, 110, 120, 140, 160, 200, 240, 280, 320, 400, 480, 560) |
Unit: ms |
REL-8 |
NOTE 1: For FDD, E-DCH MAC-d flow identity 7 is reserved for CCCH transmission.
|
Condition |
Explanation |
|
Tdd128 |
This IE is mandatory present for 1.28 Mcps TDD, otherwise it is not needed. |
|
NotCCCHFDD |
This IE is not needed for the E-DCH MAC-d flow reserved for CCCH transmission for FDD, otherwise it is optional. |
10.3.5.4 Deleted DL TrCH information
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
Downlink transport channel type |
MP |
Enumerated (DCH,DSCH |
Note 1 |
||
|
, HS-DSCH) |
REL-5 |
||||
|
DL Transport channel identity |
MP |
Transport channel identity 10.3.5.18 |
|||
|
CV-notHS-DSCH |
REL-5 |
||||
|
CHOICE DL MAC header type |
CV-HS-DSCH |
REL-7 |
|||
|
>MAC-hs |
REL-7 |
||||
|
>>DL HS-DSCH MAC-d flow identity |
MP |
MAC-d flow identity 10.3.5.7c |
REL-5 |
||
|
>MAC-ehs |
REL-7 |
||||
|
>>DL HS-DSCH MAC-ehs reordering queue |
MP |
MAC-ehs Queue Id 10.3.5.7f |
REL-7 |
||
|
Note 1: The IE "Downlink transport channel type" value " DSCH " should not be used for FDD. If received the UE behaviour is unspecified. |
|||||
|
Condition |
Explanation |
|
NotHS-DSCH |
If the downlink transport channel type is DCH or DSCH then this IE is mandatory otherwise it is not needed. |
|
HS-DSCH |
If the downlink transport channel type is HS-DSCH then this IE is mandatory otherwise it is not needed. |
10.3.5.5 Deleted UL TrCH information
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
Uplink transport channel type |
MP |
Enumerated(DCH,USCH |
USCH is TDD only |
||
|
,E-DCH) |
REL-6 |
||||
|
UL Transport channel identity |
MP |
Transport channel identity 10.3.5.18 |
|||
|
CV-NotE-DCH |
REL-6 |
||||
|
E-DCH MAC-d flow identity |
CV-E-DCH |
E-DCH MAC-d flow identity 10.3.5.7e |
REL-6 |
|
Condition |
Explanation |
|
NotE-DCH |
If the uplink transport channel type is DCH or USCH then this IE is mandatory otherwise it is not needed. |
|
E-DCH |
If the uplink transport channel type is E-DCH then this IE is mandatory otherwise it is not needed. |
10.3.5.6 DL Transport channel information common for all transport channels
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
SCCPCH TFCS |
OP |
Transport Format Combination Set 10.3.5.20 |
This IE should not be included in this version of the protocol. |
||
|
CHOICE mode |
MP |
Although this IE is not always required, need is MP to align with ASN.1 |
|||
|
OP |
REL-4 |
||||
|
>FDD |
|||||
|
>>CHOICE DL parameters |
OP |
||||
|
>>>Explicit |
|||||
|
>>>>DL DCH TFCS |
MP |
Transport Format Combination Set 10.3.5.20 |
Although this IE is not always required, need is MP to align with ASN.1 |
||
|
OP |
REL-4 |
||||
|
>>>SameAsUL |
(no data) See note 2 |
||||
|
>TDD |
|||||
|
>>Individual DL CCTrCH information |
OP |
1 to <maxCCTrCH> |
|||
|
>>>DL TFCS Identity |
MP |
Transport format combination set identity 10.3.5.21 |
Identifies a special CCTrCH for shared or dedicated channels. |
||
|
>>>CHOICE DL parameters |
MP |
||||
|
>>>>Independent |
|||||
|
>>>>>DL TFCS |
MP |
Transport format combination set 10.3.5.20 |
|||
|
>>>>SameAsUL |
See note 2 |
||||
|
>>>>>UL DCH TFCS Identity |
MP |
Transport format combination set identity 10.3.5.21 |
Same TFCS applies as specified for the indicated UL DCH TFCS identity except for information applicable for UL only |
NOTE 1: This information element is included within IE "Predefined TrCh configuration".
NOTE 2: The UTRAN should only use the choice "SameAsUL" if the transport channel numbering, the number of TFs in the TFS of each transport channel, and the TFCS are identical in the uplink and downlink.
10.3.5.7 Void
10.3.5.7a HARQ Info
This IE is used in relation to the HS-DSCH transport channel.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
Number of Processes |
MP |
Integer (1..8, |
REL-5 |
||
|
12, 14, 16, |
NOTE 1, NOTE 2 |
REL-7 |
|||
|
24,28,32) |
REL-11 |
||||
|
CHOICE Memory Partitioning |
MP |
REL-5 |
|||
|
>Implicit |
UE shall apply memory partitioning of equal size across all HARQ processes |
REL-5 |
|||
|
>Explicit |
REL-5 |
||||
|
>>Memory size |
MP |
<1 to MaxHProcesses> |
REL-5 |
||
|
>>>Process Memory size |
MP |
Integer(800 .. 16000 by step of 800, 17600 .. 32000 by step of 1600, 36000 .. 80000 by step of 4000, 88000 .. 160000 by step of 8000, 176000 .. 304000 by step of 16000) |
Maximum number of soft channel bits available in the virtual IR buffer [27] |
REL-5 |
|
|
>>Additional memory sizes for MIMO |
OP |
<1 to MaxHProcesses> |
NOTE 2 |
REL-7 |
|
|
>>>Process Memory size |
MP |
Integer (800 .. 16000 by step of 800, 17600 .. 32000 by step of 1600, 36000 .. 80000 by step of 4000, 88000 .. 160000 by step of 8000, 176000 .. 304000 by step of 16000) |
Maximum number of soft channel bits available in the virtual IR buffer [27] |
REL-7 |
|
|
>>Additional memory sizes for 3rd MIMO stream |
OP |
<1 to MaxHProcesses> |
NOTE 2 |
REL-11 |
|
|
>>>Process Memory size |
MP |
Integer (800 .. 16000 by step of 800, 17600 .. 32000 by step of 1600, 36000 .. 80000 by step of 4000, 88000 .. 160000 by step of 8000, 176000 .. 304000 by step of 16000) |
Maximum number of soft channel bits available in the virtual IR buffer [27] |
REL-11 |
|
|
>>Additional memory sizes for 4th MIMO stream |
OP |
<1 to MaxHProcesses> |
NOTE 2 |
REL-11 |
|
|
>>>Process Memory size |
MP |
Integer (800 .. 16000 by step of 800, 17600 .. 32000 by step of 1600, 36000 .. 80000 by step of 4000, 88000 .. 160000 by step of 8000, 176000 .. 304000 by step of 16000) |
Maximum number of soft channel bits available in the virtual IR buffer [27] |
REL-11 |
|
|
Blind HARQ retransmissions for HSDPA |
CV-RRCmessage |
Enumerated(TRUE) |
FDD only. TRUE means that blind HARQ retransmissions for HSDPA is enabled. |
REL-13 |
|
|
NOTE 1: If the IE “Number of processes" is not set to one of the values 12, 14 or 16 and either the IE “MIMO parameters” (10.3.6.41a) is included and the IE "MIMO operation" is set to either “start” or “continue”, the UE behaviour is unspecified. If the IE "Number of processes" is set to one of the values 12, 14, or 16 and the IE "MIMO parameters" (10.3.6.41a) is not included, the UE behaviour is unspecified. |
|||||
|
NOTE 2: The values of the IE “Number of processes" greater than 8 and the IE "Additional memory sizes for MIMO" are not needed in SIB type 5 and SIB type 5bis. |
|||||
|
Condition |
Explanation |
|
RRCmessage |
This IE is not included in the HANDOVER TO UTRAN COMMAND, RRC CONNECTION SETUP, SRNS RELOCATION INFO or SYSTEM INFORMATION messages. Otherwise it is optional. |
10.3.5.7b Void
10.3.5.7c MAC-d Flow Identity
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
MAC-d flow identity |
MP |
Integer (0..7) |
REL-5 |
10.3.5.7d HARQ Info for E-DCH
This IE is used in relation to the E-DCH transport channel.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
CHOICE mode |
MP |
REL-7 |
|||
|
>FDD |
REL-7 |
||||
|
>>HARQ RV Configuration |
MP |
Enumerated (rv0, rvtable) |
If “rv0” is indicated, the UE shall only use E_DCH RV index 0. If “rvtable” is indicated, the UE shall use an RSN based RV index as specified in [27] |
REL-6 |
|
|
>TDD |
REL-7 |
||||
|
>>HARQ RV Configuration |
MP |
Enumerated (rv0, rvtable) |
If “rv0” is indicated, the UE shall only use E_DCH RV index 0. If “rvtable” is indicated, the UE shall use an RSN based RV index as specified in [31] |
REL-7 |
10.3.5.7e E-DCH MAC-d Flow Identity
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
E-DCH MAC-d flow identity |
MP |
Integer (0..maxE-DCHMACdFlow-1) |
REL-6 |
10.3.5.7f MAC-ehs Queue Id
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
MAC-ehs queue id |
MP |
Integer (0..7) |
REL-7 |
10.3.5.8 Power Offset Information
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|---|---|---|---|---|
|
CHOICE Gain Factors |
MP |
|||
|
>Signalled Gain Factors |
||||
|
>>CHOICE mode |
||||
|
>>>FDD |
||||
|
>>>>Gain Factor c |
MP |
Integer (0.. 15) |
For UL DPCCH or control part of PRACH |
|
|
>>>TDD |
(no data) |
|||
|
>>Gain Factor d |
MP |
Integer (0..15) |
For UL DPDCH or data part of PRACH and all uplink channels in TDD |
|
|
>>Reference TFC ID |
OP |
Integer (0..3) |
If this TFC is a reference TFC, indicates the reference ID. |
|
|
>Computed Gain Factors |
||||
|
>>Reference TFC ID |
MP |
Integer (0.. 3) |
Indicates the reference TFC Id of the TFC to be used to calculate the gain factors for this TFC. In case of using computed gain factors, at least one signalled gain factor is necessary for reference. |
|
|
CHOICE mode |
MP |
|||
|
>FDD |
||||
|
>>Power offset P p-m |
OP |
Integer(-5..10) |
In dB. Power offset between the last transmitted preamble and the control part of the message (added to the preamble power to receive the power of the message control part ) Needed only for PRACH |
|
|
>TDD |
(no data) |
|
CHOICE Gain Factors |
Condition under which the way to signal the Gain Factors is chosen |
|
Signalled Gain Factors |
The values for gain factors c (only in FDD mode) and d are signalled directly for a TFC. |
|
Computed Gain Factors |
The gain factors c (only in FDD mode) and d are computed for a TFC, based on the signalled settings for the associated reference TFC. |
10.3.5.9 Predefined TrCH configuration
This information element concerns a pre- defined configuration of transport channel parameters.
|
Information Element/Group name |
Need |
Multi |
Type and Reference |
Semantics description |
|
UL Transport channel information common for all transport channels |
MP |
UL Transport channel information common for all transport channels 10.3.5.24 |
||
|
Added or Reconfigured TrCH |
||||
|
Added or Reconfigured UL TrCH information |
MP |
1 to <maxTrCHpreconf> |
||
|
>Added or Reconfigured UL TrCH information |
MP |
Added or Reconfigured UL TrCH information 10.3.5.2 |
||
|
DL Transport channel information common for all transport channels |
MP |
DL Transport channel information common for all transport channels 10.3.5.6 |
||
|
Downlink transport channels |
||||
|
Added or Reconfigured DL TrCH information |
MP |
1 to <maxTrCHpreconf> |
||
|
>Added or Reconfigured DL TrCH information |
MP |
Added or Reconfigured DL TrCH information 10.3.5.1 |
10.3.5.10 Quality Target
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
BLER Quality value |
MP |
Real(-6.3 ..0 by step of 0.1) |
Signalled value is Log10(Transport channel BLER quality target) |
10.3.5.11 Semi-static Transport Format Information
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
Transmission time interval |
MP |
Integer(10, 20, 40, 80, dynamic |
In ms. The value dynamic is only used in TDD mode. For FDD DCH, the value “80” is applicable only when SF=512. |
||
|
5) |
5 is only applicable for the RACH in 1.28 Mcps TDD |
REL-4 |
|||
|
Type of channel coding |
MP |
Enumerated(No coding, Convolutional, Turbo) |
The option "No coding" is only valid for TDD. |
||
|
Coding Rate |
CV-Coding |
Enumerated(1/2, 1/3) |
|||
|
Rate matching attribute |
MP |
Integer(1..hiRM) |
|||
|
CRC size |
MP |
Integer(0, 8, 12, 16, 24) |
in bits |
|
Condition |
Explanation |
|
Coding |
This IE is mandatory present if IE "Type of channel coding" is "Convolutional" and not needed otherwise. |
10.3.5.12 Void
10.3.5.13 TFCS Explicit Configuration
|
Information Element/Group name |
Need |
Multi |
IE type and reference |
Semantics description |
|---|---|---|---|---|
|
CHOICE TFCS representation |
MP |
|||
|
>Complete reconfiguration |
||||
|
>>TFCS complete reconfiguration information |
MP |
TFCS Reconfiguration/Addition information 10.3.5.15 |
||
|
>Addition |
||||
|
>>TFCS addition information |
MP |
TFCS Reconfiguration/Addition information 10.3.5.15 |
||
|
>Removal |
||||
|
>>TFCS removal information |
MP |
TFCS Removal Information 10.3.5.16 |
||
|
>Replace |
||||
|
>>TFCS removal information |
MP |
TFCS Removal Information 10.3.5.16 |
||
|
>>TFCS addition information |
MP |
TFCS Reconfiguration/Addition information 10.3.5.15 |
10.3.5.14 Void
10.3.5.15 TFCS Reconfiguration/Addition Information
|
Information Element/Group name |
Need |
Multi |
IE type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
CHOICE CTFC Size |
MP |
||||
|
>2 bit CTFC |
|||||
|
>>CTFC information |
MP |
1 to <maxTFC> |
|||
|
>>>2bit CTFC |
MP |
Integer(0..3) |
|||
|
>>>Power offset Information |
OP |
Power Offset Information 10.3.5.8 |
Needed only for uplink physical channels. |
||
|
>>>Power offset Information 10ms Mode |
CV-Message |
Power offset Information 10ms Mode 10.3.5.27 |
FDD only. Needed only for uplink physical channels. If not included, the corresponding TFC shall not be considered for 10ms Mode. |
REL-12 |
|
|
>4 bit CTFC |
|||||
|
>>CTFC information |
MP |
1 to <maxTFC> |
|||
|
>>>4bit CTFC |
MP |
Integer(0..15) |
|||
|
>>>Power offset Information |
OP |
Power Offset Information 10.3.5.8 |
Needed only for uplink physical channels. |
||
|
>>>Power offset Information 10ms Mode |
CV-Message |
Power offset Information 10ms Mode 10.3.5.27 |
FDD only. Needed only for uplink physical channels. If not included, the corresponding TFC shall not be considered for 10ms Mode. |
REL-12 |
|
|
>6 bit CTFC |
|||||
|
>>CTFC information |
MP |
1 to <maxTFC> |
|||
|
>>>6 bit CTFC |
MP |
Integer(0..63) |
|||
|
>>>Power offset Information |
OP |
Power Offset Information 10.3.5.8 |
Needed only for uplink physical channels. |
||
|
>>>Power offset Information 10ms Mode |
CV-Message |
Power offset Information 10ms Mode 10.3.5.27 |
FDD only. Needed only for uplink physical channels. If not included, the corresponding TFC shall not be considered for 10ms Mode. |
REL-12 |
|
|
>8 bit CTFC |
|||||
|
>>CTFC information |
MP |
1 to <MaxTFC> |
|||
|
>>>8 bit CTFC |
MP |
Integer(0..255) |
|||
|
>>>Power offset Information |
OP |
Power Offset Information 10.3.5.8 |
Needed only for uplink physical channels. |
||
|
>>>Power offset Information 10ms Mode |
CV-Message |
Power offset Information 10ms Mode 10.3.5.27 |
FDD only. Needed only for uplink physical channels. If not included, the corresponding TFC shall not be considered for 10ms Mode. |
REL-12 |
|
|
>12 bit CTFC |
|||||
|
>>CTFC information |
MP |
1 to <maxTFC> |
|||
|
>>>12 bit CTFC |
MP |
Integer(0..4095) |
|||
|
>>>Power offset Information |
OP |
Power Offset Information 10.3.5.8 |
Needed only for uplink physical channels. |
||
|
>>>Power offset Information 10ms Mode |
CV-Message |
Power offset Information 10ms Mode 10.3.5.27 |
FDD only. Needed only for uplink physical channels. If not included, the corresponding TFC shall not be considered for 10ms Mode. |
REL-12 |
|
|
>16 bit CTFC |
|||||
|
>>CTFC information |
MP |
1 to <maxTFC> |
|||
|
>>>16 bit CTFC |
MP |
Integer(0..65535) |
|||
|
>>>Power offset Information |
OP |
Power Offset Information 10.3.5.8 |
Needed only for uplink physical channels. |
||
|
>>>Power offset Information 10ms Mode |
CV-Message |
Power offset Information 10ms Mode 10.3.5.27 |
FDD only. Needed only for uplink physical channels. If not included, the corresponding TFC shall not be considered for 10ms Mode. |
REL-12 |
|
|
>24 bit CTFC |
|||||
|
>>CTFC information |
MP |
1 to <MaxTFC> |
|||
|
>>>24 bit CTFC |
MP |
Integer(0..16777215) |
|||
|
>>>Power offset Information |
OP |
Power Offset Information 10.3.5.8 |
Needed only for uplink physical channels. |
||
|
>>>Power offset Information 10ms Mode |
CV-Message |
Power offset Information 10ms Mode 10.3.5.27 |
FDD only. Needed only for uplink physical channels. If not included, the corresponding TFC shall not be considered for 10ms Mode. |
REL-12 |
|
Condition |
Explanation |
|
Message |
This IE is not needed if the IE "Uplink Transport channel information common for all transport channels" is included in RRC CONNECTION SETUP or SYSTEM INFORMATION BLOCK TYPE 16 messages. Otherwise it is optional. |
10.3.5.16 TFCS Removal Information
|
Information Element/Group name |
Need |
Multi |
IE type and reference |
Semantics description |
|---|---|---|---|---|
|
Removal TFCI information |
MP |
1 to <maxTFC> |
||
|
>TFCI |
MP |
Transport Format Combination (TFC) 10.3.5.19 |
In TDD 0 is a reserved value |
10.3.5.17 Void
10.3.5.18 Transport channel identity
This information element is used to distinguish transport channels. Transport channels of different type (RACH, USCH, FACH/PCH, DSCH or DCH) have separate series of identities. This also holds for uplink and downlink transport channel identities (i.e. for DCH). Depending on in which context a transport channel identity n that is sent, it will have different meaning
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Transport channel identity |
MP |
Integer(1..32) |
10.3.5.19 Transport Format Combination (TFC)
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Transport format combination |
MP |
Integer (0.. 1023) |
10.3.5.20 Transport Format Combination Set
Indicates the allowed combinations of already defined Transport formats and the mapping between these allowed TFCs and the corresponding TFCI values.
For TDD, different coded composite transport channels have independent transport format combination sets and thus independent TFCI values.
|
Information Element/Group name |
Need |
Multi |
IE type and reference |
Semantics description |
|---|---|---|---|---|
|
TFCI Field 1 Information |
MP |
TFCS explicit Configuration 10.3.5.13 |
10.3.5.21 Transport Format Combination Set Identity
NOTE: Only for TDD.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
TFCS ID |
MD |
Integer (1…8) |
Indicates the identity of every TFCS within a UE. Default value is 1. |
|
|
Shared Channel Indicator |
MP |
Boolean |
TRUE indicates the use of shared channels. Default is FALSE. |
10.3.5.22 Transport Format Combination Subset
Indicates which Transport format combinations in the already defined Transport format combination set are allowed.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
CHOICE Subset representation |
MP |
|||
|
>Minimum allowed Transport format combination index |
Transport format combination 10.3.5.19 |
|||
|
>Allowed transport format combination list |
1 to <maxTFC> |
|||
|
>>Allowed transport format combination |
MP |
Transport format combination 10.3.5.19 |
||
|
>Non-allowed transport format combination list |
1 to <maxTFC> |
|||
|
>>Non-allowed transport format combination |
MP |
Transport format combination 10.3.5.19 |
||
|
>Restricted TrCH information |
1 to <maxTrCH> |
|||
|
>>Uplink transport channel type |
MP |
Enumerated(DCH, USCH) |
USCH is TDD only |
|
|
>>Restricted UL TrCH identity |
MP |
Transport channel identity 10.3.5.18 |
||
|
>>Allowed TFIs |
OP |
1 to <maxTF> |
||
|
>>>Allowed TFI |
MP |
Integer(0..31) |
||
|
>Full transport format combination set |
(No data) |
10.3.5.23 Transport Format Set
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
CHOICE Transport channel type |
MP |
||||
|
>Dedicated transport channels |
The transport channel that is configured with this TFS is of type DCH |
||||
|
>>Dynamic Transport Format Information |
MP |
1 to <maxTF> |
|||
|
>>>RLC Size |
MP |
Integer(16..5000 by step of 8) |
Unit is bits |
||
|
>>>Number of TBs and TTI List |
MP |
1 to <maxTF> |
Present for every valid number of TB’s (and TTI) for this RLC Size. |
||
|
>>>>Transmission Time Interval |
CV-dynamicTTI |
Integer(10,20,40,80) |
Unit is ms. |
||
|
>>>>Number of Transport blocks |
MP |
Integer(0..512) |
|||
|
>>>CHOICE Logical Channel List |
MP |
The logical channels that are allowed to use this RLC Size |
|||
|
>>>>ALL |
Null |
All logical channels mapped to this transport channel. |
|||
|
>>>>Configured |
Null |
The logical channels configured to use this RLC size in the RB mapping info. 10.3.4.21 if present in this message or in the previously stored configuration otherwise |
|||
|
>>>>Explicit List |
1 to 15 |
Lists the logical channels that are allowed to use this RLC size. |
|||
|
>>>>>RB Identity |
MP |
RB identity 10.3.4.16 |
|||
|
>>>>>LogicalChannel |
CH-UL-RLCLogicalChannels |
Integer(0..1) |
Indicates the relevant UL logical channel for this RB. "0" corresponds to the first, "1" corresponds to the second UL logical channel configured for this RB in the IE "RB mapping info". |
||
|
>>Semi-static Transport Format Information |
MP |
Semi-static Transport Format Information 10.3.5.11 |
|||
|
>Common transport channels |
The transport channel that is configured with this TFS is of a type not equal to DCH |
||||
|
>>Dynamic Transport Format Information |
MP |
1 to <maxTF> |
Note |
||
|
>>>RLC Size |
MP |
Integer (48..4968) |
Unit is bits. For FDD, values are restricted to: Integer (48..296 by step of 8, 312..1320 by step of 16, 1384..4968 by step of 64). |
||
|
>>>Number of TBs and TTI List |
MP |
1 to <maxTF> |
Present for every valid number of TB’s (and TTI) for this RLC Size. |
||
|
>>>>Number of Transport blocks |
MP |
Integer(0..512) |
|||
|
>>>>CHOICE mode |
MP |
||||
|
>>>>>FDD |
(no data) |
||||
|
>>>>>TDD |
|||||
|
>>>>>>Transmission Time Interval |
CV-dynamicTTI |
Integer(10,20,40,80) |
Unit is ms. |
||
|
>>>CHOICE Logical Channel List |
MP |
The logical channels that are allowed to use this RLC Size. |
|||
|
>>>>ALL |
Null |
All logical channels mapped to this transport channel. |
|||
|
>>>>Configured |
Null |
The logical channels configured to use this RLC size in the RB mapping info. 10.3.4.21 if present in this message or in the previously stored configuration otherwise |
|||
|
>>>>Explicit List |
1 to 15 |
Lists the logical channels that are allowed to use this RLC size. |
|||
|
>>>>>RB Identity |
MP |
RB identity 10.3.4.16 |
|||
|
>>>>>LogicalChannel |
CV-UL-RLCLogicalChannels |
Integer(0..1) |
Indicates the relevant UL logical channel for this RB. "0" corresponds to the first, "1" corresponds to the second UL logical channel configured for this RB in the IE "RB mapping info". |
||
|
>>Semi-static Transport Format Information |
MP |
Semi-static Transport Format Information 10.3.5.11 |
|
Condition |
Explanation |
|
dynamicTTI |
This IE is mandatory present if dynamic TTI usage is indicated in IE Transmission Time Interval in Semi-static Transport Format Information. Otherwise it is not needed. |
|
UL-RLCLogicalChannels |
If "Number of uplink RLC logical channels" in IE "RB mapping info" in this message is 2 or the IE "RB mapping info" is not present in this message and 2 UL logical channels are configured for this RB, then this IE is mandatory present. Otherwise this IE is not needed. |
10.3.5.24 UL Transport channel information common for all transport channels
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
PRACH TFCS |
OP |
Transport format combination set 10.3.5.20 |
This IE should not be included in this version of the protocol. |
||
|
CHOICE mode |
OP |
||||
|
>FDD |
|||||
|
>>TFC subset |
MD |
Transport Format Combination Subset 10.3.5.22 |
Default value is the complete existing set of transport format combinations |
||
|
>>UL DCH TFCS |
MP |
Transport format combination set 10.3.5.20 |
|||
|
>TDD |
|||||
|
>>Individual UL CCTrCH information |
OP |
1 to <maxCCTrCH> |
|||
|
>>>UL TFCS Identity |
MP |
Transport format combination set identity 10.3.5.21 |
Identifies a special CCTrCH for shared or dedicated channels. |
||
|
>>>UL TFCS |
MP |
Transport format combination set 10.3.5.20 |
|||
|
>>>TFC subset |
MD |
Transport Format Combination Subset 10.3.5.22 |
Default value is the complete existing set of transport format combinations |
||
|
TFC subset list |
OP |
1 to <maxTFCsub> |
The maximum number of elements in the TFC subset list is 8. |
REL-4 |
|
|
>CHOICE mode |
MP |
REL-4 |
|||
|
>>FDD |
(no data) |
REL-4 |
|||
|
>>TDD |
REL-4 |
||||
|
>>>TFCS Id |
OP |
Transport Format Combination Set Identity 10.3.5.21 |
REL-4 |
||
|
>TFC subset |
MD |
Transport Format Combination Subset 10.3.5.22 |
REL-4 |
NOTE: This information element is included within IE "Predefined TrCh configuration".
10.3.5.25 Concurrent Deployment of 2ms and 10ms TTI
NOTE: Only for FDD.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
CHOICE TTI selection |
MP |
This IE indicates whether common E-DCH TTI selection is fixed or a threshold based common E-DCH selection criteria is used. |
REL-11 |
||
|
>Fixed |
REL-11 |
||||
|
>>Fixed common E-DCH TTI selection |
MP |
Enumerated (2ms,10ms) |
REL-11 |
||
|
>Threshold based |
REL-11 |
||||
|
>>Common E-DCH TTI selection threshold |
MP |
Integer (0..15) |
In terms of dB. |
REL-11 |
|
|
Concurrent TTI partition index |
MP |
Integer (0.. maxEDCHs-1) |
REL-11 |
||
|
Common E-DCH system info parameters for Concurrent TTI |
OP |
Common E-DCH system info parameters for Concurrent TTI 10.3.6.131 |
Common E-DCH parameters used to replace those listed in the IE "Common E-DCH system info" of the System Information Block Type 5/5bis, if the TTI applied on E-DPDCH (as per subclause 8.5.45) is different from the TTI signalled in the IE "E-DCH Transmission Time Interval". |
REL-11 |
10.3.5.26 Common E-DCH MAC-d flow info for Concurrent TTI
This IE is used in relation to MAC-d and MAC-c flows mapped to the E-DCH transport channels.
NOTE: Only for FDD.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
Configured E-DCH MAC-d flow list |
MP |
1 to <maxE-DCHMACdFlow> |
NOTE 1 NOTE 4 |
REL-11 |
|
|
>E-DCH MAC-d flow identity |
MP |
E-DCH MAC-d Flow Identity 10.3.5.7e |
REL-11 |
||
|
>E-DCH MAC-d flow power offset |
MD |
Integer(0..6) |
NOTE 2 |
REL-11 |
|
|
>E-DCH MAC-d flow maximum number of retransmissions |
MD |
Integer (0..15) |
NOTE 2 |
REL-11 |
|
|
NOTE 1: E-DCH MAC-d flow identities that are present in "Common E-DCH MAC-d flows" of the System Information Block Type 5/5bis but do not appear in this list shall use value included in "Common E-DCH MAC-d flows". NOTE 2: Default value is the value for the flow with the same "E-DCH MAC-d flow identity" included in the IE "Common E-DCH MAC-d flows" of the System Information Block Type 5/5bis. NOTE 4: For E-DCH MAC-d flows that are present in this list, the IE "E-DCH MAC-d flow multiplexing list" shall use the corresponding value for the flow with the same "E-DCH MAC-d flow identity" included in the IE "Common E-DCH MAC-d flows" of the System Information Block Type 5/5bis. |
|||||
NOTE 3: For FDD, E-DCH MAC-d flow identity 7 is reserved for CCCH transmission.
10.3.5.27 Power Offset Information 10ms Mode
NOTE: For FDD only.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
CHOICE Gain Factors |
MP |
REL-12 |
|||
|
>Signalled Gain Factors |
|||||
|
>>Gain Factor c |
MP |
Integer (0.. 15) |
For UL DPCCH |
REL-12 |
|
|
>>Gain Factor d |
MP |
Integer (0..15) |
For UL DPDCH |
REL-12 |
|
|
>>Reference TFC ID |
OP |
Integer (0..3) |
If this TFC is a reference TFC, indicates the reference ID. |
REL-12 |
|
|
>Computed Gain Factors |
|||||
|
>>Reference TFC ID |
MP |
Integer (0.. 3) |
Indicates the reference TFC Id of the TFC to be used to calculate the gain factors for this TFC. In case of using computed gain factors, at least one signalled gain factor is necessary for reference. |
REL-12 |
|
CHOICE Gain Factors |
Condition under which the way to signal the Gain Factors is chosen |
|
Signalled Gain Factors |
The values for gain factors c and d are signalled directly for a TFC. |
|
Computed Gain Factors |
The gain factors c and d are computed for a TFC, based on the signalled settings for the associated reference TFC. |