8.5.4A Physical channel establishment criteria for Enhanced Uplink in CELL_FACH state and Idle mode

25.3313GPPProtocol specificationRadio Resource Control (RRC)Release 17TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

When the physical channel establishment for Enhanced Uplink in CELL_FACH state and Idle mode is initiated by the UE, the UE shall considered the physical channel being immediately established.

If the physical layer considers the post-verification of procedure AA failed [29, section 4.3.2.3A], the UE shall consider this as a "physical channel failure".

NOTE: The criteria defined in this subclause only apply in case the UE performs synchronisation procedure AA (FDD only).