AM RLC error pending

MP

Boolean

TRUE means an unrecoverable error was detected on AM RLC during the current cell update procedure..

Set to FALSE when the cell update procedure is completed.

AM RLC error pending

MP

Boolean

TRUE means an unrecoverable error was detected on AM RLC during the current cell update procedure..

Set to FALSE when the cell update procedure is completed.

Intra-frequency cell info

OP

1..<maxCellMeas>

>CHOICE position status

MP

>>Occupied

>>>Cell info

MP

Cell info

10.3.7.2

>>Vacant

No data

Frequency info

OP

Frequency info 10.3.6.36

Frequency info for secondary uplink frequency. NOTE.

REL-9

Intra-frequency cell info on secondary UL frequency

OP

1..<maxCellMeasOnSecULFreq>

REL-9

>CHOICE position status

MP

REL-9

>>Occupied

REL-9

>>>Cell info

MP

Cell info

10.3.7.2

REL-9

>>Vacant

No data

REL-9

Inter-frequency cell info

OP

1..<maxCellMeas>

1..<maxCellMeas-e xt>

REL-12

>CHOICE position status

MP

>>Occupied

>>>Frequency info

MP

Frequency info

10.3.6.36

>>>Cell info

MP

Cell info

10.3.7.2

>>Vacant

No data

Adjacent frequency info

OP

Frequency info

10.3.6.36

REL-8

Inter-band frequency info

OP

Frequency info

10.3.6.36

REL-9

Frequency info list for enhanced measurement

OP

1.. < maxFreqMeasWithoutCM >

REL-10

>Frequency info for enhanced measurement

MP

Frequency info

10.3.6.36

REL-10

Inter-RAT cell info list

OP

REL-5

>Inter-RAT cell info

OP

1..<maxCellMeas>

>>CHOICE position status

MP

>>>Occupied

>>>>CHOICE Radio Access Technology

>>>>>GSM

>>>>>>Cell selection and re-selection info

MP

Cell selection and re-selection info for SIB11/12

10.3.2.4

>>>>>>BSIC

MP

BSIC 10.3.8.2

>>>>>>BCCH ARFCN

MP

Integer (0..1023)

[43]

>>>>>IS-2000

>>>>>>System specific measurement info

enumerated (frequency, timeslot, colour code, output power, PN offset)

For IS-2000, use fields from TIA/EIA/IS-2000.5,

subclause 3. 7.3.3.2.27, Candidate Frequency Neighbour List Message

>>>Vacant

No data

>CHOICE indication status

MP

REL-5

>>Present

REL-5

>>>Inter-RAT cell info indication

OP

Integer (0..3)

REL-5

>>Not present

No data

REL-5

Cell update started

MP

Boolean

TRUE means a cell or URA update procedure is in progress.

Set to FALSE when entering UTRA RRC connected mode.

Set to FALSE when leaving UTRA RRC connected mode.

Status for each CN domain

MP

<1 to

maxCNDomains>

>CN domain identity

MP

CN domain identity 10.3.1.1

>Status

MP

Enumerated(Not started, Started)

Set to "Not started" when entering UTRA RRC connected mode.

Set to "Not started" when leaving UTRA RRC connected mode.

Reconfiguration

MP

Boolean

TRUE means an RRC procedure performing reconfiguration of ciphering is ongoing.

Set to FALSE when entering UTRA RRC connected mode.

Set to FALSE when leaving UTRA RRC connected mode.

Common E-DCH transmission

MP

Boolean

See subclause 8.5.46

REL-8

Configuration incomplete

MP

Boolean

TRUE: An incomplete configuration has been detected.

Set to FALSE when entering UTRA RRC connected mode.

Set to FALSE when leaving UTRA RRC connected mode.

C-RNTI

OP

C-RNTI
10.3.3.8

Cleared when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Cleared when leaving UTRA RRC connected mode.

Deferred measurement status

MP

Boolean

If TRUE, the UE can transmit RRC messages on RACH and receive RRC messages commanding it to enter CELL_DCH without having read and acted on SIB11, SIB11bis, SIB12, SIB18 and SIB19.

REL-7

UE parameters for DTX-DRX

MD

DTX-DRX Information in 10.3.6.34a

REL-7

DTX_DRX_STATUS

MP

Boolean

TRUE: discontinuous transmission and reception is ongoing.

Set to FALSE when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Set to FALSE when leaving UTRA RRC connected mode.

REL-7

CS Domain Specific Access Restriction

MP

Domain Access Restriction 10.3.1.3b

This IE contains CS Domain Specific Access Restriction Parameters

Cleared when leaving UTRA RRC connected mode.

REL-6

Cleared upon successful SRNS relocation.

REL-11

PS Domain Specific Access Restriction

MP

Domain Access Restriction 10.3.1.3b

This IE contains PS Domain Specific Access Restriction Parameters

Cleared when leaving UTRA RRC connected mode.

REL-6

Cleared upon successful SRNS relocation.

REL-11

DSCH-RNTI

OP

DSCH-RNTI
10.3.3.9a

Cleared when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Cleared when leaving UTRA RRC connected mode.

Downlink secondary cell info FDD

OP

1 to 7

Downlink secondary cell info FDD 10.3.6.31a

REL-11

Domain Specific EAB Parameters

MP

Domain Specific EAB Parameters

10.3.1.3d

Cleared when leaving UTRA RRC connected mode and cleared upon successful SRNS relocation.

REL-11

CS Domain Specific Access Restriction

MP

Domain Access Restriction 10.3.1.3b

This IE contains CS Domain Specific Access Restriction Parameters.

Cleared when leaving CELL_DCH state or upon successful SRNS relocation.

REL-12

PS Domain Specific Access Restriction

MP

Domain Access Restriction 10.3.1.3b

This IE contains PS Domain Specific Access Restriction Parameters.

Cleared when leaving CELL_DCH state or upon successful SRNS relocation.

REL-12

Access Group identity

OP

Integer (0..15)

This IE indicates the Access Group to which the UE is assigned.

Cleared when leaving UTRA RRC connected mode, and upon successful SRNS relocation.

REL-12

DTCH transmission blocked

OP

Bit string(maxNumAccessGroups)

Bit 0 is the first/leftmost bit of the bit string.

Bit n corresponds to the n-th defined Access Group.
Value ‘1’ for a bit means UEs in that Access Group are blocked for DTCH transmission in CELL_FACH state, and for DCCH/CCCH due to uplink DTCH transmission in CELL_PCH state and URA_PCH state.

Cleared when leaving UTRA RRC connected mode, and upon successful SRNS relocation.

REL-12

E-DCH transmission

MP

Boolean

TRUE: E-DCH transmission is ongoing.

Set to FALSE when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Set to FALSE when leaving UTRA RRC connected mode.

REL-6

Primary E-RNTI

OP

E-RNTI
10.3.3.10a

Cleared when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Cleared when leaving UTRA RRC connected mode.

REL-6

Secondary E-RNTI

OP

E-RNTI
10.3.3.10a

Cleared when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Cleared when leaving UTRA RRC connected mode.

REL-6

RAB information

OP

1 to <maxRABsetup>

For each RAB established.

Cleared when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Cleared when leaving UTRA RRC connected mode.

>RAB info

MP

RAB info 10.3.4.8

>RB information

MP

1 to <maxRBper RAB>

For each RB belonging to the RAB

>>RB identity

MP

RB identity 10.3.4.16

>>Subflow

MP

Integer(0..<maxSubflowcount>)

Reference to the RAB subflow implemented by this RB

>>RB started

MD

Enumerated(stopped, started)

Default value is started

Signalling radio bearer information

OP

1 to < maxSRBsetup>

In the order of RB0 and upwards.

Cleared when leaving UTRA RRC connected mode.

>RB started

MD

Enumerated(stopped, started)

Default value is started

Signalling connection list

OP

1 to <maxCNdomains>

For each established signalling connection.

Cleared when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Cleared when leaving UTRA RRC connected mode.

>Signalling connection identity

MP

CN domain identity 10.3.1.1

Establishment cause

OP

Establishment cause

10.3.3.11

Cleared when leaving UTRA RRC connected mode.

Frequency Info List

MP

1 to <maxNumEUTRAFreqs>

REL-8

>EARFCN

MP

Integer(0 .. 65535)

EARFCN of the downlink carrier frequency [64].

REL-8

Integer(0..262143)

REL-11

>Measurement Bandwidth

MD

Enumerated(6, 15, 25, 50, 75, 100)

Measurement bandwidth information common for all neighbouring cells on the carrier frequency. It is defined by the parameter Transmission Bandwidth Configuration, N_RB [36.104]. The values indicate the number of resource blocks over which the UE could measure. Default value is 6.

REL-8

>Exclude-listed cells per freq list

OP

1 to <maxEUTRACellPerFreq>

REL-8

>>Physical Cell identity

MP

Integer (0..503)

A list of exclude-listed cells can be signalled per frequency

REL-8

>Wideband RSRQ measurements

OP

Enumerated (TRUE)

If this field is present, the UE shall use a wider bandwidth when performing RSRQ measurements according to TS 36.133 [74].

REL-11

Failure cause

OP

Failure cause 10.3.3.13

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

Support of the first Frequency Band

MP

Boolean

For FDD, cleared when leaving the camped cell or no IE “Frequency Bands Indicator Support” in SIB5/5bis.

For 1.28Mcps TDD, cleared when leaving the camped cell.

REL-10

Support of the second Frequency Band

MP

Boolean

For FDD, cleared when leaving the camped cell or no “Frequency Bands Indicator Support” in SIB5/5bis.

For 1.28Mcps TDD, cleared when leaving the camped cell.

REL-10

Failure indicator

MP

Boolean

TRUE: Procedure has failed.

Set to FALSE when entering UTRA RRC connected mode.

Set to FALSE when leaving UTRA RRC connected mode.

H-RNTI

OP

H-RNTI
10.3.3.14a

Cleared when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Cleared when leaving UTRA RRC connected mode.

REL-5

HS-DSCH reception

MP

Boolean

TRUE: HS-DSCH reception is ongoing.

Set to FALSE when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Set to FALSE when leaving UTRA RRC connected mode.

REL-5

HS-DSCH reception in CELL_FACH state

MP

Boolean

TRUE: HS-DSCH reception in CELL_FACH is ongoing.

Set to FALSE when entering UTRA RRC connected mode, CELL_PCH, URA_PCH and CELL_DCH.

Set to FALSE when leaving UTRA RRC connected mode,

REL-7

HS-DSCH reception of CCCH

MP

Boolean

TRUE: HS-DSCH reception for the CCCH is enabled.

Set to FALSE when leaving UTRA RRC connected mode.

Set to FALSE when entering CELL_PCH, URA_PCH and CELL_DCH.

REL-7

HS-DSCH reception in all states

MP

Boolean

TRUE: HS-DSCH reception in CELL_DCH, CELL_FACH, CELL_PCH or URA_PCH is ongoing.

Set to FALSE when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Set to FALSE when leaving UTRA RRC connected mode

REL-7

HS-DSCH reception

MP

1 to 7

Boolean

TRUE: HS-DSCH reception is configured for a secondary serving, assisting serving or assisting secondary serving HS-DSCH cell.

Set to FALSE when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Set to FALSE when leaving UTRA RRC connected mode.

REL-11

HS-DSCH DRX in CELL_FACH status

MP

Boolean

TRUE: HS-DSCH DRX operation in CELL_FACH is supported.

Set to FALSE when leaving CELL_FACH or when dedicated H-RNTI is cleared.

REL-8

UE parameters for HS-SCCH less

MD

HS-SCCH less Information in 10.3.6.36ab

REL-7

HS-SCCH DRX in CELL_FACH status

MP

Boolean

TRUE: HS-SCCH DRX operation in CELL_FACH is supported.

Set to FALSE when "HS_SCCH DRX in CELL_FACH Information" is not included in RADIO BEARER RECONFIGURATION/CELL UPDATE CONFIRM message or when leaving CELL_FACH or when dedicated H-RNTI is cleared or upon successful SRNS relocation.

REL-14

HS_SCCH_LESS_STATUS

MP

Boolean

TRUE: HS-SCCH less HS-DSCH transmission is ongoing.

Set to FALSE when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Set to FALSE when leaving UTRA RRC connected mode.

REL-7

Incompatible security reconfiguration

MP

Boolean

TRUE: An incompatible simultaneous security reconfiguration has been detected.

Set to FALSE when entering UTRA RRC connected mode.

Set to FALSE when leaving UTRA RRC connected mode.

HSPA_RNTI_STORED _PCH

MP

Boolean

TRUE: variables H_RNTI, C_RNTI and E_RNTI are stored in CELL_PCH or URA_PCH state.

Set to FALSE when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Set to FALSE when leaving UTRA RRC connected mode.

REL-8

Initial UE identity

OP

Initial UE identity

10.3.3.15

Cleared when leaving UTRA RRC connected mode.

Uplink Integrity protection activation info

OP

Integrity protection activation info 10.3.3.17

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

Status

MP

Enumerated(Not started, Started)

Set to "Not started" when entering UTRA RRC connected mode.

Set to "Not started" when leaving UTRA RRC connected mode.

Reconfiguration

MP

Boolean

TRUE means a reconfiguration of integrity protection is ongoing.

Set to FALSE when entering UTRA RRC connected mode.

Set to FALSE when leaving UTRA RRC connected mode.

Signalling radio bearer specific integrity protection information

OP

1 to <maxSRBsetup>

When integrity protection is started, status information for RB0- RB4 in that order.

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>Uplink RRC HFN

MP

Bit string (28)

>Downlink RRC HFN

MP

Bit string (28)

>Uplink RRC Message sequence number

MP

Integer (0..

15)

>Downlink RRC Message sequence number

OP

Integer (0..

15)

Predefined configuration status information

OP

Predefined configuration status information 10.3.4.5a

Cleared upon entering connected mode in another RAT

Predefined configuration status information compressed

OP

Predefined configuration status information compressed 10.3.4.5b

Cleared upon entering connected mode in another RAT

REL-5

UE security information

OP

UE security information 10.3.3.42b

Cleared upon entering connected mode in another RAT

UE security information2

OP

UE security information2 10.3.3.42c

Cleared upon entering connected mode in another RAT

REL-6

UE radio access capability

OP

UE radio access capability 10.3.3.42

Cleared upon entering connected mode in another RAT

UE radio access capability extension

OP

UE radio access capability extension 10.3.3.42a

Cleared upon entering connected mode in another RAT

UE radio access capability compressed

OP

UE radio access capability compressed

10.3.3.42o

REL-5

UE system specific capability

OP

1 to <maxSystemCapability>

Inter-RAT UE radio access capability 10.3.8.7

Cleared upon entering connected mode in another RAT

>Inter-RAT UE radio access capability

MP

Inter-RAT UE radio access capability 10.3.8.7

Invalid configuration

MP

Boolean

TRUE: An invalid configuration has been detected.

Set to FALSE when entering UTRA RRC connected mode.

Set to FALSE when leaving UTRA RRC connected mode.

Latest configured CN domain

OP

CN domain identity 10.3.1.1

Cleared when entering UTRA RRC connected mode when not stated otherwise in the procedure.

Cleared when leaving UTRA RRC connected mode.

SRB delay

OP

Integer (0..7)

Cleared when entering UTRA RRC connected mode when not stated otherwise in the procedure.

PC preamble

OP

Integer (0..7)

Cleared when entering UTRA RRC connected mode when not stated otherwise in the procedure.

Activated service list

OP

1 to <maxMBMS-Services>

>Service Identity

MP

MBMS Service identity 10.3.9a.8

>Service type

MP

Enumerated (Multicast, Broadcast)

>MBMS Selected Services Indicator

CV-Broadcast

Boolean

TRUE means that the service is currently a MBMS Selected Service

Broadcast

This IE is mandatory present if the IE "Service type" is set to ‘Broadcast’ and not needed otherwise.

PREV Frequency Information

CHOICE mode

>FDD cell

>>UARFCN downlink (Nd)

MP

Integer(0 .. 16383)

[21]

>3.84 Mcps TDD cell

>>UARFCN (Nt)

MP

Integer(0 .. 16383)

[22]

>1.28 Mcps TDD cell list

>>UARFCN (Nt)

MP

Integer(0 .. 16383)

[22]

MBMS_PL_SERVICE_RESTRICTION_INFO_DEDICATED

MP

Enumerated (TRUE, FALSE)

Set to FALSE when entering UTRA connected mode.

REL-6

MEASUREMENT CONTROL

OP

MEASUREMENT CONTROL 10.2.17, System Information Block type 11 10.2.48.8.14, System Information Block type 12 10.2.48.8.15, System Information Block type 11ter 10.2.48.8.14b

Information as contained in these messages.

Cleared when entering UTRA RRC connected mode when not stated otherwise in the procedure (8.4.1.8-8.4.1.9).

Cleared when leaving UTRA RRC connected mode when not stated otherwise in the procedure (8.4.1.9a).

NOTE: "Container for application layer measurement configuration" is not required to be stored as part of this variable.

CHOICE mode

MP

REL-8

>FDD

REL-8

>>MIMO N_cqi_typeA/M_cqi ratio

OP

Enumerated(1/2, 2/3, 3/4, 4/5, 5/6, 6/7, 7/8, 8/9, 9/10, 1/1)

>>MIMO pilot configuration

OP

MIMO pilot configuration 10.3.6.41b

>>Precoding weight set restriction

OP

Enumerated (TRUE)

If present, UE applies precoding weight set restriction.

REL-7

>TDD

REL-8

>>CHOICE TDD option

MP

REL-8

>>>1.28 Mcps TDD

REL-8

>>>>MIMO SF Mode for HS-PDSCH dual stream

MP

Enumerated (SF1, SF1/SF16)

REL-8

>>>>HS-SICH Reference Signal Info

OP

<1 to maxHSSCCHs >

The order of the list corresponds to the order of HS-SCCHs in HS-SCCH info

REL-8

>>>>> Reference Signal Midamble configuration

MP

Integer

(2, 4, 6, 8, 10, 12, 14, 16)

Midamble Allocation mode is UE specific midamble allocation

REL-8

>>>>>Reference Signal Midamble Shift

MP

Integer

(0..15)

The allocated midamble shift.

REL-8

>>>>>Reference Signal Timeslot number

MP

Integer

(1..5)

REL-8

>>>3.84 Mcps TDD or 7.68 Mcps TDD

(no data)

REL-8

MIMO status

MP

Boolean

TRUE means the UE is operating in MIMO mode.

Cleared when leaving CELL_DCH state.

Ordered reconfiguration

MP

Boolean

TRUE means that a Reconfiguration procedure is ongoing.

Set to FALSE when entering UTRA RRC connected mode.

Set to FALSE when leaving UTRA RRC connected mode.

2ms TTI Configuration Information

OP

Other TTI E-DCH Configuration Information

10.3.6.152

REL-12

10ms TTI Configuration Information

OP

Other TTI E-DCH Configuration Information 10.3.6.152

REL-12

Target Mode

OP

Enumerated (O-mode, R-mode)

The UE shall only transit to the signalled mode for operation of ROHC as decribed in [36].

REL-5

RB with PDCP information list

OP

1 to <maxRBallRABs>

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>RB with PDCP information

MP

RB with PDCP information

10.3.4.22

PUSCH configuration

OP

Cleared when entering and leaving UTRA RRC connected mode.

>PUSCH info

MP

PUSCH info

10.3.6.63

>PUSCH Identity

OP

Integer(1.. hiPUSCHidentities)

>PUSCH power control info

OP

PUSCH power control info
10.3.6.65

PDSCH configuration

OP

Cleared when entering and leaving UTRA RRC connected mode.

>PDSCH Info

MP

PDSCH Info 10.3.6.44

>PDSCH Identity

OP

Integer(1..hiPDSCHidentities)

>PDSCH power control info

OP

PDSCH power control info 10.3.6.45

ISCP Timeslot list

OP

1 to maxTS

Cleared when entering and leaving UTRA RRC connected mode.

>Timeslot number

MP

Timeslot number 10.3.6.84

Timeslot numbers, for which the UE shall report the timeslot ISCP in PUSCH CAPACITY REQUEST message

Paging Response Restriction Indication

MP

Enumerated(All, CS, PS, None)

Cleared when leaving UTRA RRC connected mode.

REL-8

Cleared upon successful SRNS relocation.

REL-11

Location/Registration Restriction Indicator

MP

Enumerated(All, CS, PS)

Cleared when leaving UTRA RRC connected mode.

REL-8

Cleared upon successful SRNS relocation.

REL-11

Location/Registration

MP

Location /Registration Parameters

10.3.1.7oa

Cleared when leaving UTRA RRC connected mode.

REL-8

Cleared upon successful SRNS relocation.

REL-11

Priority status

MP

Enumerated (sys_info_priority, dedicated_priority)

REL-8

UTRA Serving Cell

OP

REL-8

>priority

OP

Integer (0..<maxPrio–1>)

Absence of this IE indicates that the lowest priority is assigned to the serving frequency (lower than any assigned priority)

REL-8

>S_{prioritysearch1}

MP

Integer (0..62 by step of 2)

RSCP, dB

REL-8

>S_{prioritysearch2}

MD

Integer (0..7 by step of 1)

dB, default value is 0

REL-8

>Thresh_serving,low

MP

Integer (0..62 by step of 2)

RSCP, dB

REL-8

>Thresh_serving,low2

MD

Integer (0..31)

Ec/N0, [dB], default value is 0

REL-9

Priority Info List

OP

1 to <maxNumPrio>

REL-8

>priority

OP

Integer (0..<maxPrio–1>)

Absence of this IE indicates that no priority is assigned to the indicated frequencies

REL-8

>subpriority

CV-E-UTRA-priority

Enumerated(oDot2, oDot4, oDot6, oDot8)

Fractional priority value. If present, this value is added to the value of IE "priority".

REL-13

>CHOICE Radio Access Technology

MP

REL-8

>>UTRA FDD

REL-8

>>>Frequency List

1 to <maxNumFDDFreqs>

>>>>UARFCN

MP

Integer (0.. 16383)

REL-8

>>>>QqualminFDD

MD

Integer (-24..0)

Ec/N0, [dB]

Default value is -24.

REL-8

>>>>QrxlevminFDD

MD

Integer (-119..-25 by step of 2)

RSCP, dBm

Default value is -119.

REL-8

>>>>Thresh_{x, high}

OP

Integer (0..62 by step of 2)

RSCP, dB

REL-8

>>>>Thresh_{x, low}

OP

Integer (0..62 by step of 2)

RSCP, dB

REL-8

>>UTRA TDD

REL-8

>>>Frequency List

1 to <maxNumTDDFreqs>

>>>>UARFCN

MP

Integer (0.. 16383)

REL-8

>>>>QrxlevminTDD

MD

Integer (-119..-25 by step of 2)

RSCP, dBm

Default value is -119.

REL-8

>>>>Thresh_{x, high}

OP

Integer (0..62 by step of 2)

RSCP, dB

REL-8

>>>>Thresh_{x, low}

OP

Integer (0..62 by step of 2)

RSCP, dB

REL-8

>>E-UTRA

REL-8

>>>Frequency List

1 to <maxNumEUTRAFreqs>

>>>>EARFCN

MP

Integer(0 .. 65535)

EARFCN of the downlink carrier frequency [64]

REL-8

Integer(0..262143)

REL-11

>>>>QrxlevminEUTRA

MD

Integer (-140..-44 by step of 2)

RSRP, dBm

Default value is -140.

REL-8

>>>> Thresh_{x, high}

OP

Integer (0..62 by step of 2)

RSRP, dB

REL-8

>>>>Thresh_{x, low}

OP

Integer (0..62 by step of 2)

RSRP, dB

REL-8

>>>>QqualminEUTRA

MD

Integer (-34..-3)

RSRQ, dB

default value is negative infinity

REL-9

>>>>Thresh_{x, high2}

OP

Integer (0..31)

RSRQ, dB

REL-9

>>>>Thresh_{x, low2}

OP

Integer (0..31)

RSRQ, dB

REL-9

>>>>EUTRA-RSRQ-offsetWB

OP

Integer (-31.. 31)

Offset in dB used for Measured results on RACH

REL-11

>>>>EUTRARSRQ-OnAllSymbolsOffset

OP

Integer (-31.. 31)

RSRQ all OFDM symbols Offset in dB used for Measured results on RACH

REL-12

>>GSM

REL-8

>>>NCC permitted

MD

Bit string (8) {NCC 0 to 7}

Bitmap indicating NCC values;
reselection of GERAN cells is permitted when the corresponding NCC bit = "1". Default is “11111111”

>>>Frequency List

MP

1 to < maxCellMeas>

REL-8

>>>>Band indicator

MP

Enumerated (DCS 1800 band used, PCS 1900 band used)

Indicates how to interpret the BCCH ARFCN

REL-8

>>>>BCCH ARFCN

MP

Integer (0..1023)

[45]

REL-8

>>>>QrxlevminGSM

MD

Integer (-115..-56 by step of 2)

GSM RSSI, dBm

Default value is -115.

REL-8

>>>>Thresh_{x, high}

OP

Integer (0..62 by step of 2)

GSM RSSI, dB

REL-8

>>>>Thresh_{x, low}

OP

Integer (0..62 by step of 2)

GSM RSSI, dB

REL-8

E-UTRA detection

OP

Boolean

‘TRUE’ means that the UE may detect the presence of a E-UTRA cell and report to NAS

REL-8

E-UTRA-priority

This IE is optionally present if IE "Radio Access Technology" is set to E-UTRA and if IE "priority" is present. Otherwise it is not needed.

Paging Response Restriction Indication

MP

Enumerated(All, CS, PS, None)

Cleared when leaving CELL_DCH state or upon successful SRNS relocation.

REL-12

Location/Registration Restriction Indicator

MP

Enumerated(All, CS, PS)

Cleared when leaving CELL_DCH state or upon successful SRNS relocation.

REL-12

Location/Registration

MP

Location /Registration Parameters

10.3.1.7oa

Cleared when leaving CELL_DCH state or upon successful SRNS relocation.

REL-12

Protocol error indicator

MP

Protocol error indicator 10.3.3.27

Set to FALSE when entering UTRA RRC connected mode.

Set to FALSE when leaving UTRA RRC connected mode.

Protocol error information

OP

Protocol error information 10.3.8.12

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

Protocol error reject

MP

Boolean

TRUE: a severe protocol error has occurred.

Set to FALSE when entering UTRA RRC connected mode.

Set to FALSE when leaving UTRA RRC connected mode.

RB timer indicator

OP

RB timer indicator 10.3.3.28

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

RB uplink ciphering activation time info

OP

RB activation time info 10.3.4.13

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

RNC support for change of UE capability

MP

Boolean

Cleared when leaving UTRA RRC connected mode.

Ready for common EDCH

MP

Boolean

See subclause 8.5.47

REL-8

Status for each CN domain

MP

<1 to

maxCNDomains>

>CN domain identity

MP

CN domain identity 10.3.1.1

>Status

MP

Enumerated(Affected, Not Affected)

THRESHOLD

OP

Integer (0..1048576)

20 bits.

Cleared when entering UTRA RRC connected mode when not stated otherwise in the procedure.

Cleared when leaving UTRA RRC connected mode.

START

OP

START 10.3.3.38

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

Serving Cell Change MAC reset

OP

Boolean

REL-8

Serving Cell Change Message Type

OP

Enumerated (RadioBearerSetup, RadioBearerReconfiguration, TransportChannelReconfiguration, PhysicalChannelReconfiguration)

REL-8

Serving Cell Change Transaction Id

OP

Integer (0..3)

REL-8

Target cell preconfigurations

OP

1 to <maxRL>

REL-8

>Primary scrambling code

MP

Integer(0..511)

REL-8

>Target cell preconfiguration information

MP

Target cell preconfiguration information 10.3.6.79a

REL-8

Enhanced Serving Cell Change for Event 1c Support Indicator

OP

Enumerated (TRUE)

TRUE means that Enhanced Serving Cell Change for Event 1c for CELL_DCH UE is enabled

REL-12

CHOICE mode

MP

>FDD

>>Current TFC subset

MP

Transport Format Combination Subset

10.3.5.22

Set to "Full transport format set" when entering UTRA RRC connected mode when not stated otherwise in the procedure.

>>Duration

OP

TFC Control duration 10.3.6.80

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>>Default TFC subset

OP

Transport Format Combination Subset

10.3.5.22

The TFC subset to go back to when any temporary limitation is released.

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>>TFC subset list

MP

1 to <maxTFCsub>

REL-4

>>>TFC subset

MP

Transport Format Combination Subset

10.3.5.22

REL-4

>TDD

>>TFCS list

MP

1 to < maxCCTrCH >

One TFCS is created when entering UTRA RRC connected mode when not stated otherwise in the procedure.

>>>TFCS identity

MP

Transport Format Combination Set Identity 10.3.5.21

"TFCS ID" is set to 1 when entering UTRA RRC connected mode when not stated otherwise in the procedure.

"Shared channel indicator" is set to FALSE when entering UTRA RRC connected mode when not stated otherwise in the procedure.

>>>Current TFC subset

MP

Transport Format Combination Subset

10.3.5.22

Set to "Full transport format set" when entering UTRA RRC connected mode when not stated otherwise in the procedure.

>>>>Duration

OP

TFC Control duration 10.3.6.80

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>>>>Default TFC subset

OP

Transport Format Combination Subset

10.3.5.22

The TFC subset to go back to when any temporary limitation is released.

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>>TFC subset list

MP

1 to <maxTFCsub2>

REL-4

>>>TFCS identity

MP

Transport Format Combination Set Identity 10.3.5.21

REL-4

>>>TFC subset

MP

Transport Format Combination Subset

10.3.5.22

REL-4

Transmission gap pattern sequence

OP

1 to <maxTGPS>

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>TGPSI

MP

TGPSI 10.3.6.82

>TGPS Status Flag

MP

Enumerated(activate, deactivate)

This flag indicates whether the Transmission Gap Pattern Sequence shall be activated or deactivated.

> Current TGPS Status Flag

MP

Enumerated(active, inactive)

This flag indicates the current status of the Transmission Gap Pattern Sequence, whether it is active or inactive

>TGCFN

CV-Active

Integer (0..255)

Connection Frame Number of the first frame of the first pattern within the Transmission Gap Pattern Sequence.

>Transmission gap pattern sequence configuration parameters

MP

Information as contained in the IE group "Transmission gap pattern sequence configuration parameters" in IE "DPCH compressed mode info"

10.3.6.33.

Active

This IE is mandatory present when the value of the IE "TGPS Status Flag" is "Activate" and not needed otherwise.

Proposed TGSN reported

MP

Boolean

Set to FALSE when entering UTRA RRC connected mode.

Set to FALSE when leaving UTRA RRC connected mode.

UE Timers and constants in connected mode

MD

UE Timers and constants in connected mode 10.3.3.43

Default value means that for all timers and constants

– for parameters with need MD, the defaults specified in 10.3.3.43 apply and

– for parameters with need OP, the parameters are absent.

All parameters are set to the default value when leaving UTRA RRC connected mode to another RAT.

Accepted transactions

OP

1 to <maxtransactions>

Cleared when leaving UTRA RRC connected mode.

>Message type

MP

Message Type

>RRC transaction identifier

MP

RRC transaction identifier 10.3.3.36

>Measurement identity

CV-MeasCtrl

Measurement identity 10.3.7.48

Rejected transactions

OP

1 to <maxtransactions>

Cleared when leaving UTRA RRC connected mode.

>Message type

MP

Message Type

>RRC transaction identifier

MP

RRC transaction identifier 10.3.3.36

>Measurement identity

CV-MeasCtrl

Measurement identity 10.3.7.48

Processed transactions

OP

1 to <maxtransactions>

Cleared when leaving UTRA RRC connected.

>Message type

MP

Message Type

>RRC transaction identifier

MP

RRC transaction identifier 10.3.3.36

MeasCtrl

The IE is mandatory if IE "Message type" is set to MEASUREMENT CONTROL, otherwise it is not needed.

Cells triggered

OP

1 to < maxCellMeas>

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>primary CPICH

MP

Primary CPICH info 10.3.6.60

>sent reports

MP

Integer(1..Infinity)

Number of reports sent to UTRAN in case of event triggered periodical reporting

Cells recently triggered

OP

1 to < maxCellMeas>

>primary CPICH

MP

Primary CPICH info 10.3.6.60

>sent reports

MP

Integer(1..Infinity)

Number of reports sent to UTRAN in case of event triggered periodical reporting

Periodical reporting running

MP

Boolean

Cells triggered

OP

1 to < maxCellMeas>

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>primary CPICH

MP

Primary CPICH info 10.3.6.60

>sent reports

MP

Integer(1..Infinity)

Number of reports sent to UTRAN in case of event triggered periodical reporting

REL-5

Cells recently triggered

OP

1 to < maxCellMeas>

REL-5

>primary CPICH

MP

Primary CPICH info 10.3.6.60

REL-5

>sent reports

MP

Integer(1..Infinity)

Number of reports sent to UTRAN in case of event triggered periodical reporting.

REL-5

Periodical reporting running

MP

Boolean

REL-5

Cells triggered

OP

1 to < maxCellMeas>

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>primary CPICH

MP

Primary CPICH info 10.3.6.60

>sent reports

MP

Integer(1..Infinity)

Number of reports sent to UTRAN in case of event triggered periodical reporting

Cells recently triggered

OP

1 to < maxCellMeas>

>primary CPICH

MP

Primary CPICH info 10.3.6.60

>sent reports

MP

Integer(1..Infinity)

Number of reports sent to UTRAN in case of event triggered periodical reporting

Periodical reporting running

MP

Boolean

Best cell

OP

Primary CPICH info 10.3.6.60

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

Cells triggered

OP

1 to < maxCellMeas>

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>primary CPICH

MP

Primary CPICH info 10.3.6.60

Cells recently triggered

OP

1 to < maxCellMeas>

>primary CPICH

MP

Primary CPICH info 10.3.6.60

Cells triggered

OP

1 to < maxCellMeas>

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>primary CPICH

MP

Primary CPICH info 10.3.6.60

Cells recently triggered

OP

1 to < maxCellMeas>

>primary CPICH

MP

Primary CPICH info 10.3.6.60

Cells triggered

OP

1 to < maxCellMeas>

>Primary CCPCH info

MP

Primary CCPCH info 10.3.6.57

Cells triggered

OP

1 to < maxCellMeas>

>Primary CCPCH info

MP

Primary CCPCH info 10.3.6.57

Cells triggered

OP

1 to < maxCellMeas>

>Primary CCPCH info

MP

Primary CCPCH info 10.3.6.57

Best frequency

MP

Frequency info 10.3.6.36

Frequency triggered

OP

1 to < maxCellMeas>

>Frequency

MP

Frequency info 10.3.6.36

Frequency triggered

OP

1 to < maxCellMeas>

>Frequency

MP

Frequency info 10.3.6.36

Event triggered

OP

Boolean

Frequency triggered

OP

1 to < maxCellMeas>

>Frequency

MP

Frequency info 10.3.6.36

Event triggered

OP

Boolean

CHOICE system

OP

>GSM

>>CHOICE BSIC

MP

>>>Verified BSIC

0 to <maxCellMeas>

>>>>Inter-RAT cell id

MP

Integer (0..<maxCellMeas>-1)

>>>Non verified BSIC

0 to <maxCellMeas>

>>>>BCCH ARFCN

MP

Integer (0..1023)

>E-UTRA

REL-8

>>E-UTRA Carrier Frequency list

MP

1 to <maxReportedEUTRAFreqs>

REL-8

1 to <maxReportedEUTRAFreqs-ext>

REL-12

>>>E-UTRA Carrier Frequency

MP

Integer (0..65535)

EARFCN of the downlink carrier frequency [64].

REL-8

Integer (0..262143)

REL-11

>>>Cell list

MP

1 to <maxReportedEUTRACellsPerFreq>

REL-8

>>>>Physical Cell Identity

MP

Integer (0..503)

REL-8

CHOICE system

OP

>GSM

>>CHOICE BSIC

MP

>>>Verified BSIC

0 to <maxCellMeas>

>>>>Inter-RAT cell id

MP

Integer (0..<maxCellMeas>-1)

>>>Non verified BSIC

0 to <maxCellMeas>

>>>>BCCH ARFCN

MP

Integer (0..1023)

>E-UTRA

REL-8

>>E-UTRA Carrier Frequency list

MP

1 to <maxReportedEUTRAFreqs>

REL-8

1 to <maxReportedEUTRAFreqs-ext>

REL-12

>>>E-UTRA Carrier Frequency

MP

Integer (0..65535)

EARFCN of the downlink carrier frequency [64].

REL-8

Integer (0..262143)

REL-11

>>>Cell list

MP

1 to <maxReportedEUTRACellsPerFreq>

REL-8

>>>>Physical Cell Identity

MP

Integer (0..503)

REL-8

CHOICE system

OP

>GSM

>>CHOICE BSIC

MP

>>>Verified BSIC

0 to <maxCellMeas>

>>>>Inter-RAT cell id

MP

Integer (0..<maxCellMeas>-1)

>>>Non verified BSIC

0 to <maxCellMeas>

>>>>BCCH ARFCN

MP

Integer (0..1023)

>E-UTRA

REL-8

>>E-UTRA Carrier Frequency list

MP

1 to <maxReportedEUTRAFreqs>

REL-8

1 to <maxReportedEUTRAFreqs-ext>

REL-12

>>>E-UTRA Carrier Frequency

MP

Integer (0..65535)

EARFCN of the downlink carrier frequency [64].

REL-8

Integer (0..262143)

REL-11

>>>Cell list

MP

1 to <maxReportedEUTRACellsPerFreq>

REL-8

>>>>Physical Cell Identity

MP

Integer (0..503)

REL-8

CHOICE system

>GSM

>>CHOICE BSIC

MP

>>>Verified BSIC

>>>>Inter-RAT cell id

MP

Integer (0..<maxCellMeas>-1)

>>>Non verified BSIC

>>>>BCCH ARFCN

MP

Integer (0..1023)

>E-UTRA

REL-8

>>E-UTRA Carrier Frequency

MP

Integer (0..65535)

EARFCN of the downlink carrier frequency [64].

REL-8

Integer (0..262143)

REL-11

>>Physical Cell Identity

MP

Integer (0..503)

REL-8

Event triggered

OP

Boolean

Event triggered

OP

Boolean

Event triggered

OP

Boolean

Event triggered

OP

Boolean

Event triggered

OP

Boolean

CHOICE mode

>FDD

Event triggered_RL

OP

<maxRL>

Boolean

>1.28 Mcps TDD

REL-4

>>T_ADV

MP

TADV info 10.3.7.112

REL-4

Event triggered_RL

OP

<maxRL>

Boolean

Cells triggered

OP

1 to < maxCellMeas>

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

REL-6

>primary CPICH

MP

Primary CPICH info 10.3.6.60

REL-6

>sent reports

MP

Integer(1..Infinity)

Number of reports sent to UTRAN in case of event triggered periodical reporting

REL-6

Cells recently triggered

OP

1 to < maxCellMeas>

REL-6

>primary CPICH

MP

Primary CPICH info 10.3.6.60

REL-6

>sent reports

MP

Integer(1..Infinity)

Number of reports sent to UTRAN in case of event triggered periodical reporting

REL-6

Periodical reporting running

MP

Boolean

REL-6

Frequency triggered

OP

1 to < maxCellMeas>

Cleared when entering UTRA RRC connected mode. Cleared when leaving UTRA RRC connected mode.

>Frequency

MP

Frequency info 10.3.6.36

>Best cell

MP

Primary CPICH info 10.3.6.60

UE radio access capability

OP

UE radio access capability 10.3.3.42

Cleared when entering UTRA RRC connected mode.

Cleared when leaving UTRA RRC connected mode.

UE radio access capability extension

OP

UE radio access capability extension 10.3.3.42a

Cleared when entering UTRA RRC connected mode.

Cleared when leaving UTRA RRC connected mode.

UE system specific capability

OP

1 to < maxInterSysMessages>

>Inter-RAT UE radio access capability

MP

Inter-RAT UE radio access capability 10.3.8.7

Includes inter-RAT classmark.

Cleared when entering UTRA RRC connected mode.

Cleared when leaving UTRA RRC connected mode.

UE radio access capability

OP

UE radio access capability 10.3.3.42

Cleared when entering UTRA RRC connected mode when not stated otherwise in the procedure.

Cleared when leaving UTRA RRC connected mode.

UE radio access capability extension

OP

UE radio access capability extension 10.3.3.42a

Cleared when entering UTRA RRC connected mode when not stated otherwise in the procedure.

Cleared when leaving UTRA RRC connected mode.

UE system specific capability

OP

1 to <maxSystemCapability>

>Inter-RAT UE radio access capability

MP

Inter-RAT UE radio access capability 10.3.8.7

Includes inter-RAT classmark.

Cleared when entering UTRA RRC connected mode when not stated otherwise in the procedure.

Cleared when leaving UTRA RRC connected mode.

UE radio access capability compressed

OP

UE radio access capability compressed

10.3.3.42o

REL-5

Security capability

OP

Security capability 10.3.3.37

REL-5

GPS Data ciphering info

OP

UE positioning Ciphering info 10.3.7.86

GPS Deciphering Keys

OP

>Current deciphering key

MP

Bit string(56)

>Next deciphering key

MP

Bit string(56)

UE positioning GPS reference time

OP

UE positioning GPS reference time
10.3.7.96

UE positioning GPS reference UE position

OP

Ellipsoid point with altitude and uncertainty ellipsoid 10.3.8.4c

A priori knowledge of UE 3-D position.

UE positioning GPS DGPS corrections

OP

UE positioning GPS DGPS corrections 10.3.7.91

UE positioning GPS navigation model

OP

1 to <maxSat>

>SatID

MP

Enumerated(0..63)

Satellite ID

>GPS Ephemeris and Clock Correction parameters

MP

UE positioning GPS Ephemeris and Clock Correction parameters 10.3.7.91a

UE positioning GPS ionospheric model

OP

UE positioning GPS ionospheric model 10.3.7.92

UE positioning GPS UTC model

OP

UE positioning GPS UTC model
10.3.7.97

UE positioning GPS almanac

OP

>SatID

MP

1 to <maxSatAlmanacStorage>

>>WN_a

MP

Same as IE in 10.3.7.89

>>DataID

MP

Same as IE in 10.3.7.89

>>e

MP

Same as IE in 10.3.7.89

>>t_oa

MP

Same as IE in 10.3.7.89

>>I

MP

Same as IE in 10.3.7.89

>>OMEGADOT

MP

Same as IE in 10.3.7.89

>>SV Health

MP

Same as IE in 10.3.7.89

>>A^1/2

MP

Same as IE in 10.3.7.89

>>OMEGA₀

MP

Same as IE in 10.3.7.89

>>M₀

MP

Same as IE in 10.3.7.89

>>

MP

Same as IE in 10.3.7.89

>>af₀

MP

Same as IE in 10.3.7.89

>>af₁

MP

Same as IE in 10.3.7.89

>SV Global Health

OP

Same as IE in 10.3.7.89

UE positioning GPS acquisition assistance

OP

UE positioning GPS acquisition assistance 10.3.7.88

UE positioning GPS real-time integrity

OP

UE positioning GPS real-time integrity 10.3.7.95

UE positioning OTDOA reference cell info for UE-assisted

OP

UE positioning OTDOA reference cell info
10.3.7.108

UE positioning OTDOA neighbour cell list for UE-assisted

OP

1 to <maxCellMeas>

>UE positioning OTDOA neighbour cell info for UE-assisted

MP

UE positioning OTDOA neighbour cell info
10.3.7.106

OTDOA Deciphering Keys

OP

>Current deciphering key

MP

Bit string(56)

>Next deciphering key

MP

Bit string(56)

OTDOA Data ciphering info

OP

UE positioning Ciphering info 10.3.7.86

UE positioning OTDOA reference cell info for UE-based

OP

UE positioning OTDOA reference cell info for UE-based
10.3.7.108a

UE positioning OTDOA neighbour cell list for UE-based

OP

1 to <maxCellMeas>

>UE positioning OTDOA neighbour cell info for UE-based

MP

UE positioning OTDOA neighbour cell info for UE-based
10.3.7.106

GANSS Data ciphering info

OP

UE positioning Ciphering info 10.3.7.86

REL-7

GANSS Deciphering Keys

OP

REL-7

>Current deciphering key

MP

Bit string(56)

REL-7

>Next deciphering key

MP

Bit string(56)

REL-7

UE positioning GANSS reference time

OP

UE positioning GANSS reference time 10.3.7.96o

REL-7

UE positioning GANSS reference UE position

OP

Ellipsoid point with altitude and uncertainty ellipsoid 10.3.8.4c

A priori knowledge of UE 3-D position.

REL-7

UE positioning GANSS additional ionospheric model

OP

UE positioning GANSS ionospheric model 10.3.7.92b

REL-8

UE positioning GANSS Earth orientation parameters

OP

UE positioning GANSS Earth orientation parameters 10.3.7.92c

REL-8

UE positioning GANSS ionospheric model

OP

UE positioning GANSS ionospheric model 10.3.7.92a

REL-7

GANSS Generic DataList

OP

1 to <maxGANSS>

REL-7

>GANSS ID

OP

Integer (0..7)

Same as IE in 10.3.7.90b

REL-7

>SBAS ID

CV-GANSS‑ID‑SBAS

UE positioning GANSS SBAS ID 10.3.7.97e

REL-8

>GANSS Time Models List

1 to <maxGANSS-1>

REL-7

>>Positioning GANSS Time Model

OP

UE positioning GANSS time model 10.3.7.97a

>UE positioning DGANSS corrections

OP

UE positioning DGANSS corrections 10.3.7.91b

REL-7

>UE positioning DBDS corrections

CV-GANSS‑ID‑BDS

UE positioning DBDS corrections 10.3.7.92e

REL-12

>UE positioning BDS Ionospheric Grid Model

CV-GANSS‑ID‑BDS

UE positioning BDS Ionospheric Grid Model

10.3.7.92d

REL-12

>UE positioning GANSS navigation model

OP

UE positioning GANSS navigation model 10.3.7.94a

REL-7

>UE positioning GANSS additional navigation models

OP

UE positioning GANSS additional navigation models 10.3.7.94b

REL-8

>UE positioning GANSS real-time integrity

OP

UE positioning GANSS real-time integrity 10.3.7.95a

REL-7

>UE positioning GANSS data bit assistance

OP

UE positioning GANSS data bit assistance 10.3.7.97b

REL-7

>UE positioning GANSS reference measurement information

OP

UE positioning GANSS reference measurement information 10.3.7.88b

REL-7

>UE positioning GANSS almanac

OP

UE positioning GANSS almanac 10.3.7.89a

REL-7

>UE positioning GANSS UTC model

OP

UE positioning GANSS UTC model
10.3.7.97c

REL-7

>UE positioning GANSS additional UTC models

OP

UE positioning GANSS additional UTC models 10.3.7.97d

REL-8

>UE positioning GANSS auxiliary information

OP

UE positioning GANSS auxiliary information 10.3.7.97f

REL-8

GANSS-ID-SBAS

The IE is mandatory present if the IE "GANSS ID" is "SBAS" and never stored otherwise.

GANSS-ID-BDS

The IE is optionally present if the IE "GANSS ID" is "BDS" and never stored otherwise.

Unsupported configuration

MP

Boolean

TRUE: An unsupported configuration has been detected.

Set to FALSE when entering UTRA RRC connected mode.

Set to FALSE when leaving UTRA RRC connected mode.

URA identity

OP

URA identity 10.3.2.6

Cleared when entering UTRA RRC connected mode.

Cleared when leaving UTRA RRC connected mode.

U-RNTI

OP

U-RNTI 10.3.3.47

Cleared when leaving UTRA RRC connected mode.

MIB value tag

OP

MIB value tag 10.3.8.9

Value tag for the master information block

SB 1 value tag

OP

Cell value tag 10.3.8.4

Value tag for the scheduling block type 1

SB 2 value tag

OP

Cell value tag 10.3.8.4

Value tag for the scheduling block type 2

SB 3 value tag

OP

Cell Value tag 2 10.3.8.4o

Value tag for the scheduling block type 3

SIB 1 value tag

CV-GSM

PLMN value tag 10.3.8.10

Value tag for the system information block type 1

Note: IE ‘PLMN value tag’ is used for SIB1 but the area scope for SIB 1 is Cell.

SIB 2 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 2

SIB 3 value tag

OP

Cell value tag 10.3.8.4 or Cell Value tag 2 10.3.8.4o

Value tag for the system information block type 3

SIB 4 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 4

SIB 5 value tag

OP

Cell value tag 10.3.8.4 or Cell Value tag 2 10.3.8.4o

Value tag for the system information block type 5 or 5bis

SIB 6 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 6

CHOICE mode

MP

>FDD

>TDD

(no data)

SIB 11 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 11

SIB 11bis value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 11bis

REL-6

SIB 11ter value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 11ter

REL-12

SIB 12 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 12

SIB 13 value tag

CV-ANSI

Cell value tag 10.3.8.4

Value tag for the system information block type 13

SIB 13.1 value tag

CV-ANSI

Cell value tag 10.3.8.4

Value tag for the system information block type 13.1

SIB 13.2 value tag

CV-ANSI

Cell value tag 10.3.8.4

Value tag for the system information block type 13.2

SIB 13.3 value tag

CV-ANSI

Cell value tag 10.3.8.4

Value tag for the system information block type 13.3

SIB 13.4 value tag

CV-ANSI

Cell value tag 10.3.8.4

Value tag for the system information block type 13.4

SIB 15 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 15

SIB 15bis value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 15bis

REL-7

SIB 15.1 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 15.1

SIB 15.1ter value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 15.1ter

REL-12

SIB 15.2 value tag list

OP

1 to <maxSat>

List of value tags for all stored occurrences of system information block type 15.2

>SIB 15.2 value tag

MP

Cell value tag 10.3.8.4

>SIB occurrence identity and value tag

MP

SIB occurrence identity and value tag 10.3.8.20b

SIB 15.3 value tag list

OP

1 to <maxSat>

List of value tags for all stored occurrences of system information block type 15.3

>SIB 15.3 value tag

MP

PLMN value tag 10.3.8.10

Value tag for the system information block type 15.3

>SIB occurrence identity and value tag

MP

SIB occurrence identity and value tag 10.3.8.20b

SIB 15.4 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 15.4

SIB 15.5 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 15.5

GANSS specific SIBs

OP

1 to <maxGANSS>

REL-7

>GANSS ID

MD

Integer(0..7)

Identifier for GANSS, absence of this IE means Galileo.

For coding description see NOTE 1 in 10.3.7.90b.

REL-7

>SBAS ID

CV-GANSS‑ID‑SBAS

UE positioning GANSS SBAS ID 10.3.7.97e

REL-8

>SIB 15.1bis value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 15.1bis

REL-7

>SIB 15.2bis value tag list

OP

1 to <maxSat>

List of value tags for all stored occurrences of system information block type 15.2bis

REL-7

>>SIB 15.2bis value tag

MP

Cell value tag 10.3.8.4

REL-7

>>SIB occurrence identity and value tag

MP

SIB occurrence identity and value tag 10.3.8.20b

REL-7

>SIB 15.2ter value tag list

OP

1 to <maxSat>

List of value tags for all stored occurrences of system information block type 15.2ter

REL-8

>>SIB 15.2ter value tag

MP

Cell value tag 10.3.8.4

REL-8

>>SIB occurrence identity and value tag

MP

SIB occurrence identity and value tag 10.3.8.20b

REL-8

>SIB 15.3bis value tag list

OP

1 to <maxSat>

List of value tags for all stored occurrences of system information block type 15.3bis

REL-7

>>SIB 15.3bis value tag

MP

PLMN value tag 10.3.8.10

Value tag for the system information block type 15.3bis

REL-7

>>SIB occurrence identity and value tag

MP

SIB occurrence identity and value tag 10.3.8.20b

REL-7

>SIB 15.6 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 15.6

REL-7

>SIB 15.7 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 15.7

REL-7

>SIB 15.8 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 15.8

REL-7

SIB 16 value tag list

OP

1 to <maxPredefConfig>

List of value tags for all stored occurrences of the system information block type 16

>Predefined configuration identity and value tag

MP

Predefined configuration identity and value tag 10.3.8.11

SIB 18 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 18

SIB 19 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 19

REL-8

SIB 20 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 20

REL-8

SIB 21 value tag

OP

Cell value tag 10.3.8.4 or Cell Value tag 2 10.3.8.4o

Value tag for the system information block type 21

REL-11

SIB 22 value tag

OP

Cell value tag 10.3.8.4 or Cell Value tag 2 10.3.8.4o

Value tag for the system information block type 22

REL-11

SIB 23 value tag

OP

Cell value tag 10.3.8.4

Value tag for the system information block type 23

REL-12

GSM

This information is optional when the UE is operating in "GSM-MAP mode" and never stored otherwise.

ANSI

This information is optional when the UE is operating in "ANSI-41 mode" and never stored otherwise.

GANSS‑ID‑SBAS

The IE is mandatory present if the IE "GANSS ID" is "SBAS" and never stored otherwise.

UE parameters for Control Channel DRX

MP

Control Channel DRX Information 1.28Mcps TDD in 10.3.6.107

REL-8

CONTROL_CHANNEL_DRX_STATUS

MP

Boolean

TRUE:

control channel discontinuous reception is enable.

Set to FALSE when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Set to FALSE when leaving UTRA RRC connected mode.

REL-8

UE parameters for E-DCH SPS

MP

E-DCH SPS Information 1.28Mcps TDD in 10.3.6.111

REL-8

E_DCH_SPS_STATUS

MP

Boolean

TRUE: E-DCH SPS operation is ongoing.

Set to FALSE when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Set to FALSE when leaving UTRA RRC connected mode.

REL-8

UE parameters for HS-DSCH SPS

MP

HS-DSCH SPS Information 1.28Mcps TDD in 10.3.6.112

REL-8

HS_DSCH_SPS_STATUS

MP

Boolean

TRUE: HS-DSCH SPS is ongoing.

Set to FALSE when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Set to FALSE when leaving UTRA RRC connected mode.

REL-8

MIMO N_cqi_typeA/M_cqi ratio

OP

1 to 7

Enumerated(1/2, 2/3, 3/4, 4/5, 5/6, 6/7, 7/8, 8/9, 9/10, 1/1)

REL-11

MIMO pilot configuration

OP

1 to 7

MIMO pilot configuration 10.3.6.41b

REL-11

Precoding weight set restriction

OP

1 to 7

Enumerated (TRUE)

REL-11

MIMO status

MP

1 to 7

Boolean

TRUE means the secondary cell of the UE is operating in MIMO mode.

Cleared when leaving CELL_DCH state or leaving multi-cell operation.

REL-11

Secondary cell E-DCH transmission

MP

Boolean

TRUE: E-DCH transmission is configured on the secondary uplink frequency.

Set to FALSE when entering UTRA RRC connected mode when not otherwise stated in the procedure.

Set to FALSE when leaving UTRA RRC connected mode.

REL-9

CSG Intra-frequency cell info

OP

10.3.7.121

REL-9

CSG Inter-frequency cell info

OP

10.3.7.120

REL-9

CELL_DCH measurement occasion pattern sequence

OP

CELL_DCH measurement occasion info LCR

10.3.7.126

Information as contained in these messages.

Cleared when leaving CELL_DCH state.

System Information Container

OP

System Information Container 10.2.48a

Cleared when entering UTRA RRC connected mode, when leaving UTRA RRC connected mode and when UE changes a serving cell to the other cell than the cell associated with this variable.

REL-9

MU-MIMO info

MP

MU-MIMO info 1.28 Mcps TDD 10.3.6.122

MU_MIMO status