V300

When initiating the procedure RRC connection establishment

Upon expiry of T300.

When V300 > N300, the UE enters idle mode.

V302

When initiating the procedure Cell update or URA update

Upon expiry of T302

When V302 > N302 the UE enters idle mode.

V304

When sending the first UE CAPABILITY INFORMATION message.

Upon expiry of T304

When V304 > N304 the UE initiates the Cell update procedure

V308

When sending the first RRC CONNECTION RELEASE COMPLETE message in a RRC connection release procedure.

Upon expiry of T308

When V308 > N308 the UE stops re-transmitting the RRC CONNECTION RELEASE COMPLETE message.

V310

When sending the first PUSCH CAPACITY REQUEST message in a PUSCH capacity request procedure

Upon expiry of T310

When V310 > N310 the UE stops re-transmitting the PUSCH CAPACITY REQUEST message.

V316

At transmission or reception of PS data or signalling on SRB3 or upwards, or entering RRC Connected mode, or successful SRNS relocation.

Upon sending the SIGNALLING CONNECTION RELEASE INDICATION message, with the IE "Signalling Connection Release Indication Cause" set to "UE Requested PS Data session end" in CELL_PCH state or URA_PCH state or in CELL_FACH state and the variable HS_DSCH_DRX_CELL_FACH_2CYCLE_STATUS is set to TRUE and the DRX cycle length in use is equal to or longer than the shorter CN domain specific DRX cycle length for the PS domain and CS domain and V316 < 1.

When V316 >= 1 the UE stops sending any further SIGNALLING CONNECTION RELEASE INDICATION messages, with the IE "Signalling Connection Release Indication Cause" set to "UE Requested PS Data session end" in CELL_PCH state or URA_PCH state or in CELL_FACH state and the variable HS_DSCH_DRX_CELL_FACH_2CYCLE_STATUS is set to TRUE for as long as the DRX cycle length in use is equal to or longer than the shorter CN domain specific DRX cycle length for the PS domain and CS domain.