11.5 RRC information between network nodes
25.3313GPPProtocol specificationRadio Resource Control (RRC)Release 17TS
Internode-definitions DEFINITIONS AUTOMATIC TAGS ::=
BEGIN
IMPORTS
HandoverToUTRANCommand,
MeasurementReport,
PhysicalChannelReconfiguration,
RadioBearerReconfiguration,
RadioBearerRelease,
RadioBearerSetup,
RRCConnectionSetupComplete-r3-add-ext-IEs,
RRC-FailureInfo,
TransportChannelReconfiguration,
UECapabilityInformation-r3-add-ext-IEs
FROM PDU-definitions
— Core Network IEs :
CN-DomainIdentity,
CN-DomainInformationList,
CN-DomainInformationListFull,
CN-DRX-CycleLengthCoefficient,
NAS-SystemInformationGSM-MAP,
— UTRAN Mobility IEs :
CellIdentity,
URA-Identity,
— User Equipment IEs :
AccessStratumReleaseIndicator,
C-RNTI,
ChipRateCapability,
DL-CapabilityWithSimultaneousHS-DSCHConfig,
DL-PhysChCapabilityFDD-v380ext,
DL-PhysChCapabilityTDD,
DL-PhysChCapabilityTDD-LCR-r4,
GSM-Measurements,
HSDSCH-physical-layer-category,
FailureCauseWithProtErr,
MaxHcContextSpace,
MaximumAM-EntityNumberRLC-Cap,
MaximumRLC-WindowSize,
MaxNoPhysChBitsReceived,
MaxNoDPDCH-BitsTransmitted,
MaxPhysChPerFrame,
MaxPhysChPerSubFrame-r4,
MaxPhysChPerTS,
MaxROHC-ContextSessions-r4,
MaxTS-PerFrame,
MaxTS-PerSubFrame-r4,
MinimumSF-DL,
MultiModeCapability,
MultiRAT-Capability,
NetworkAssistedGPS-Supported,
PhysicalChannelCapability-edch-r6,
RadioFrequencyBandTDDList,
RLC-Capability,
RRC-MessageSequenceNumber,
SecurityCapability,
SimultaneousSCCPCH-DPCH-Reception,
STARTList,
STARTSingle,
START-Value,
SupportOfDedicatedPilotsForChEstimation,
T-305,
TransportChannelCapability,
TxRxFrequencySeparation,
U-RNTI,
UE-CapabilityContainer-IEs,
UE-GANSSPositioning-Capability,
UE-MultiModeRAT-Capability,
UE-PowerClassExt,
UE-RadioAccessCapabBandFDDList,
UE-RadioAccessCapabBandFDDList2,
UE-RadioAccessCapabBandFDDList-ext,
UE-RadioAccessCapability,
UE-RadioAccessCapability-v370ext,
UE-RadioAccessCapability-v380ext,
UE-RadioAccessCapability-v3a0ext,
UE-RadioAccessCapability-v3g0ext,
UE-RadioAccessCapability-v4b0ext,
UE-RadioAccessCapability-v590ext,
UE-RadioAccessCapability-v5c0ext,
UE-RadioAccessCapability-v7e0ext,
UE-RadioAccessCapability-v7f0ext,
UL-PhysChCapabilityFDD,
UL-PhysChCapabilityFDD-r6,
UL-PhysChCapabilityTDD,
UL-PhysChCapabilityTDD-LCR-r4,
— Radio Bearer IEs :
PDCP-ROHC-TargetMode,
PredefinedConfigStatusList,
PredefinedConfigValueTag,
RAB-InformationSetupList,
RAB-InformationSetupList-r4,
RAB-InformationSetupList-r5,
RAB-InformationSetupList-r6-ext,
RAB-InformationSetupList-r6,
RAB-InformationSetupList-v6b0ext,
RAB-InformationSetupList-r7,
RAB-InformationSetupList-r8,
RAB-InformationSetupList-v820ext,
RAB-InformationSetupList-r11,
RB-Identity,
SRB-InformationSetupList,
SRB-InformationSetupList-r5,
SRB-InformationSetupList-r6,
SRB-InformationSetupList-r7,
SRB-InformationSetupList-r8,
SRB-InformationSetupList-r11,
— Transport Channel IEs :
CPCH-SetID,
DL-CommonTransChInfo,
DL-CommonTransChInfo-r4,
DL-AddReconfTransChInfoList,
DL-AddReconfTransChInfoList-r4,
DL-AddReconfTransChInfoList-r5,
DL-AddReconfTransChInfoList-r7,
DL-AddReconfTransChInfoList-r9,
DL-AddReconfTransChInfoList-TDD128-v9c0ext,
DL-AddReconfTransChInfoList-r11,
DRAC-StaticInformationList,
UL-CommonTransChInfo,
UL-CommonTransChInfo-r4,
UL-CommonTransChInfo-r12,
UL-AddReconfTransChInfoList,
UL-AddReconfTransChInfoList-r6,
UL-AddReconfTransChInfoList-r7,
UL-AddReconfTransChInfoList-r8,
— Physical Channel IEs :
DCH-Enhancements-Info-FDD,
DL-CommonInformation-r12,
DL-InformationPerRL-List-r12,
DL-InformationPerRL-List-r13,
DTX-DRX-Info-r12,
FrequencyInfo,
PrimaryCPICH-Info,
TPC-CombinationIndex,
ScramblingCodeChange,
Serving-HSDSCH-CellInformation-r12,
TGCFN,
TGPSI,
TGPS-ConfigurationParams,
TGPS-ConfigurationParams-r8,
UL-SecondaryCellInfoFDD-r12,
UL-SecondaryCellInfoFDD-r13,
— Measurement IEs :
Event1j-r6,
Hysteresis,
Inter-FreqEventCriteriaList-v590ext,
Intra-FreqEventCriteriaList-v590ext,
IntraFreqEvent-1d-r5,
IntraFreqReportingCriteria-1b-r5,
InterRATCellInfoIndication,
MeasuredResultsOnRACHinterFreq,
MeasurementIdentity,
MeasurementIdentity-r9,
MeasurementReportingMode,
MeasurementType,
MeasurementType-r4,
MeasurementType-r6,
MeasurementType-r7,
MeasurementType-r8,
MeasurementType-r9,
MeasurementType-r10,
MeasurementType-r11,
MeasurementType-r12,
MeasurementType-r13,
MeasurementType-r14,
MeasurementType-Relocation-r14,
MeasurementType-Relocation-r15,
AdditionalMeasurementID-List,
AdditionalMeasurementID-List-r9,
PositionEstimate,
ReportingCellStatus,
ThresholdSFN-GPS-TOW-us,
TimeToTrigger,
— MBMS IEs :
MBMS-JoinedInformation-r6,
MBMS-SelectedServiceInfo,
— Other IEs :
GERANIu-RadioAccessCapability,
GSM-MS-RadioAccessCapability,
InterRAT-UE-RadioAccessCapabilityList,
InterRAT-UE-RadioAccessCapability-v590ext,
InterRAT-UE-RadioAccessCapability-v690ext,
InterRAT-UE-RadioAccessCapability-v860ext,
UE-HistoryInformation,
UESpecificBehaviourInformation1idle,
UESpecificBehaviourInformation1interRAT
FROM InformationElements
maxCNdomains,
maxEDCHRL,
maxGANSS,
maxNoOfMeas,
maxRB,
maxRBallRABs,
maxRFC3095-CID,
maxSRBsetup,
maxRL,
maxTGPS
FROM Constant-definitions;
— Part 1: Class definitions similar to what has been defined in 11.1 for RRC messages
— Information that is tranferred in the same direction and across the same path is grouped
— ***************************************************
—
— RRC information, to target RNC
—
— ***************************************************
— RRC Information to target RNC sent either from source RNC or from another RAT
ToTargetRNC-Container ::= CHOICE {
interRATHandoverInfo InterRATHandoverInfoWithInterRATCapabilities-r3,
srncRelocation SRNC-RelocationInfo-r3,
rfc3095-ContextInfo RFC3095-ContextInfo-r5,
extension NULL
}
— ***************************************************
—
— RRC information, target RNC to source RNC
—
— ***************************************************
TargetRNC-ToSourceRNC-Container ::= CHOICE {
radioBearerSetup RadioBearerSetup,
radioBearerReconfiguration RadioBearerReconfiguration,
radioBearerRelease RadioBearerRelease,
transportChannelReconfiguration TransportChannelReconfiguration,
physicalChannelReconfiguration PhysicalChannelReconfiguration,
rrc-FailureInfo RRC-FailureInfo,
— IE dl-DCCHmessage consists of an octet string that includes the IE DL-DCCH-Message
dL-DCCHmessage OCTET STRING,
extension NULL
}
— Part 2: Container definitions, similar to the PDU definitions in 11.2 for RRC messages
— In alphabetical order
— ***************************************************
—
— Handover to UTRAN information
—
— ***************************************************
InterRATHandoverInfoWithInterRATCapabilities-r3 ::= CHOICE {
r3 SEQUENCE {
— IE InterRATHandoverInfoWithInterRATCapabilities-r3-IEs also
— includes non critical extensions
interRATHandoverInfo-r3 InterRATHandoverInfoWithInterRATCapabilities-r3-IEs,
v390NonCriticalExtensions SEQUENCE {
interRATHandoverInfoWithInterRATCapabilities-v390ext
InterRATHandoverInfoWithInterRATCapabilities-v390ext-IEs,
— Reserved for future non critical extension
v690NonCriticalExtensions SEQUENCE {
interRATHandoverInfoWithInterRATCapabilities-v690ext
InterRATHandoverInfoWithInterRATCapabilities-v690ext-IEs,
v860NonCriticalExtensions SEQUENCE {
interRATHandoverInfoWithInterRATCapabilities-v860ext
InterRATHandoverInfoWithInterRATCapabilities-v860ext-IEs,
v920NonCriticalExtensions SEQUENCE {
interRATHandoverInfoWithInterRATCapabilities-v920ext
InterRATHandoverInfoWithInterRATCapabilities-v920ext-IEs,
nonCriticalExtensions SEQUENCE {} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
},
criticalExtensions SEQUENCE {}
}
InterRATHandoverInfoWithInterRATCapabilities-r3-IEs ::= SEQUENCE {
— The order of the IEs may not reflect the tabular format
— but has been chosen to simplify the handling of the information in the BSC
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList OPTIONAL,
— interRATHandoverInfo, Octet string is used to obtain 8 bit length field prior to
— actual information. This makes it possible for BSS to transparently handle information
— received via GSM air interface even when it includes non critical extensions.
— The octet string shall include the InterRATHandoverInfo information
— The BSS can re-use the 44.018 length field received from the MS
interRATHandoverInfo OCTET STRING (SIZE (0..255))
}
InterRATHandoverInfoWithInterRATCapabilities-v390ext-IEs ::= SEQUENCE {
— User equipment IEs
failureCauseWithProtErr FailureCauseWithProtErr OPTIONAL
}
InterRATHandoverInfoWithInterRATCapabilities-v690ext-IEs ::= SEQUENCE {
— Other IEs
ue-RATSpecificCapability-v690ext InterRAT-UE-RadioAccessCapability-v690ext OPTIONAL
}
InterRATHandoverInfoWithInterRATCapabilities-v860ext-IEs ::= SEQUENCE {
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapability-v860ext OPTIONAL
}
InterRATHandoverInfoWithInterRATCapabilities-v920ext-IEs ::= SEQUENCE {
— Other IEs
ue-Inactivity-Period INTEGER (1..120) OPTIONAL
}
— ***************************************************
—
— RFC3095 context, source RNC to target RNC
—
— ***************************************************
RFC3095-ContextInfo-r5 ::= CHOICE {
r5 SEQUENCE {
rFC3095-ContextInfoList-r5 RFC3095-ContextInfoList-r5,
— Reserved for future non critical extension
nonCriticalExtensions SEQUENCE {} OPTIONAL
},
criticalExtensions SEQUENCE {}
}
RFC3095-ContextInfoList-r5 ::= SEQUENCE (SIZE (1..maxRBallRABs)) OF
RFC3095-ContextInfo
— ***************************************************
—
— SRNC Relocation information
—
— ***************************************************
SRNC-RelocationInfo-r3 ::= CHOICE {
r3 SEQUENCE {
sRNC-RelocationInfo-r3 SRNC-RelocationInfo-r3-IEs,
v380NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v380ext SRNC-RelocationInfo-v380ext-IEs,
— Reserved for future non critical extension
v390NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v390ext SRNC-RelocationInfo-v390ext-IEs,
v3a0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v3a0ext SRNC-RelocationInfo-v3a0ext-IEs,
v3b0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v3b0ext SRNC-RelocationInfo-v3b0ext-IEs,
v3c0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v3c0ext SRNC-RelocationInfo-v3c0ext-IEs,
laterNonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v3d0ext SRNC-RelocationInfo-v3d0ext-IEs,
— Container for additional R99 extensions
sRNC-RelocationInfo-r3-add-ext BIT STRING
(CONTAINING SRNC-RelocationInfo-v3h0ext-IEs) OPTIONAL,
v3g0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v3g0ext SRNC-RelocationInfo-v3g0ext-IEs,
v4b0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v4b0ext SRNC-RelocationInfo-v4b0ext-IEs,
v590NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v590ext
SRNC-RelocationInfo-v590ext-IEs,
v5a0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v5a0ext
SRNC-RelocationInfo-v5a0ext-IEs,
v5b0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v5b0ext
SRNC-RelocationInfo-v5b0ext-IEs,
v5c0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v5c0ext
SRNC-RelocationInfo-v5c0ext-IEs,
v690NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v690ext
SRNC-RelocationInfo-v690ext-IEs,
v6b0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v6b0ext
SRNC-RelocationInfo-v6b0ext-IEs,
v770NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v770ext
SRNC-RelocationInfo-v770ext-IEs,
v7e0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v7e0ext
SRNC-RelocationInfo-v7e0ext-IEs,
v7f0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v7f0ext
SRNC-RelocationInfo-v7f0ext-IEs,
nonCriticalExtensions
SEQUENCE {} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
},
later-than-r3 CHOICE {
r4 SEQUENCE {
sRNC-RelocationInfo-r4 SRNC-RelocationInfo-r4-IEs,
v4d0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v4d0ext SRNC-RelocationInfo-v4d0ext-IEs,
— Container for adding non critical extensions after freezing REL-5
sRNC-RelocationInfo-r4-add-ext BIT STRING OPTIONAL,
v590NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v590ext SRNC-RelocationInfo-v590ext-IEs,
v5a0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v5a0ext SRNC-RelocationInfo-v5a0ext-IEs,
v5b0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v5b0ext SRNC-RelocationInfo-v5b0ext-IEs,
v5c0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v5c0ext SRNC-RelocationInfo-v5c0ext-IEs,
v690NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v690ext SRNC-RelocationInfo-v690ext-IEs,
v6b0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v6b0ext
SRNC-RelocationInfo-v6b0ext-IEs,
v770NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v770ext
SRNC-RelocationInfo-v770ext-IEs,
v7e0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v7e0ext
SRNC-RelocationInfo-v7e0ext-IEs,
v7f0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v7f0ext
SRNC-RelocationInfo-v7f0ext-IEs,
nonCriticalExtensions SEQUENCE {} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
},
criticalExtensions CHOICE {
r5 SEQUENCE {
sRNC-RelocationInfo-r5 SRNC-RelocationInfo-r5-IEs,
sRNC-RelocationInfo-r5-add-ext BIT STRING OPTIONAL,
v5a0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v5a0ext SRNC-RelocationInfo-v5a0ext-IEs,
v5b0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v5b0ext SRNC-RelocationInfo-v5b0ext-IEs,
v5c0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v5c0ext SRNC-RelocationInfo-v5c0ext-IEs,
v690NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v690ext SRNC-RelocationInfo-v690ext-IEs,
v6b0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v6b0ext SRNC-RelocationInfo-v6b0ext-IEs,
v770NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v770ext
SRNC-RelocationInfo-v770ext-IEs,
v7e0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v7e0ext
SRNC-RelocationInfo-v7e0ext-IEs,
v7f0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v7f0ext
SRNC-RelocationInfo-v7f0ext-IEs,
nonCriticalExtensions SEQUENCE {} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
},
criticalExtensions CHOICE {
r6 SEQUENCE {
sRNC-RelocationInfo-r6 SRNC-RelocationInfo-r6-IEs,
sRNC-RelocationInfo-r6-add-ext BIT STRING
(CONTAINING SRNC-RelocationInfo-r6-add-ext-IEs) OPTIONAL,
v6b0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v6b0ext SRNC-RelocationInfo-v6b0ext-IEs,
v770NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v770ext SRNC-RelocationInfo-v770ext-IEs,
v820NonCriticalExtensions SEQUENCE {
srnc-RelocationInfo-v820ext SRNC-RelocationInfo-v820ext-IEs,
v860NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v860ext SRNC-RelocationInfo-v860ext-IEs,
nonCriticalExtensions SEQUENCE {} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
},
criticalExtensions CHOICE {
r7 SEQUENCE {
sRNC-RelocationInfo-r7 SRNC-RelocationInfo-r7-IEs,
sRNC-RelocationInfo-r7-add-ext BIT STRING
(CONTAINING SRNC-RelocationInfo-r7-add-ext-IEs) OPTIONAL,
v820NonCriticalExtensions SEQUENCE {
srnc-RelocationInfo-v820ext SRNC-RelocationInfo-v820ext-IEs,
v860NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v860ext SRNC-RelocationInfo-v860ext-IEs,
nonCriticalExtensions SEQUENCE {} OPTIONAL
} OPTIONAL
} OPTIONAL
},
criticalExtensions CHOICE {
r8 SEQUENCE {
sRNC-RelocationInfo-r8 SRNC-RelocationInfo-r8-IEs,
sRNC-RelocationInfo-r8-add-ext BIT STRING OPTIONAL,
v7e0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v7e0ext SRNC-RelocationInfo-v7e0ext-IEs,
v7f0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v7f0ext
SRNC-RelocationInfo-v7f0ext-IEs,
v8d0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v8d0ext
SRNC-RelocationInfo-v8d0ext-IEs,
nonCriticalExtensions SEQUENCE {} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
},
criticalExtensions CHOICE {
r9 SEQUENCE {
sRNC-RelocationInfo-r9 SRNC-RelocationInfo-r9-IEs,
sRNC-RelocationInfo-r9-add-ext BIT STRING OPTIONAL,
v8d0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v8d0ext SRNC-RelocationInfo-v8d0ext-IEs,
v970NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v970ext
SRNC-RelocationInfo-v970ext-IEs,
v9c0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v9c0ext
SRNC-RelocationInfo-v9c0ext-IEs,
nonCriticalExtensions SEQUENCE {} OPTIONAL
} OPTIONAL
} OPTIONAL
} OPTIONAL
},
criticalExtensions CHOICE {
r10 SEQUENCE {
sRNC-RelocationInfo-r10 SRNC-RelocationInfo-r10-IEs,
sRNC-RelocationInfo-r10-add-ext BIT STRING OPTIONAL,
v9c0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v9c0ext
SRNC-RelocationInfo-v9c0ext-IEs,
vab0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-vab0ext
SRNC-RelocationInfo-vab0ext-IEs,
nonCriticalExtensions SEQUENCE {} OPTIONAL
} OPTIONAL
} OPTIONAL
},
criticalExtensions CHOICE {
r11 SEQUENCE {
sRNC-RelocationInfo-r11 SRNC-RelocationInfo-r11-IEs,
sRNC-RelocationInfo-r11-add-ext BIT STRING OPTIONAL,
nonCriticalExtensions SEQUENCE {} OPTIONAL
},
criticalExtensions CHOICE {
r12 SEQUENCE {
sRNC-RelocationInfo-r12 SRNC-RelocationInfo-r12-IEs,
sRNC-RelocationInfo-r12-add-ext BIT STRING OPTIONAL,
nonCriticalExtensions SEQUENCE {} OPTIONAL
},
criticalExtensions CHOICE {
r13 SEQUENCE {
sRNC-RelocationInfo-r13 SRNC-RelocationInfo-r13-IEs,
sRNC-RelocationInfo-r13-add-ext BIT STRING OPTIONAL,
nonCriticalExtensions SEQUENCE {} OPTIONAL
},
criticalExtensions SRNC-RelocationInfo-LaterCriticalExtensions
}
}
}
}
}
}
}
}
}
}
}
SRNC-RelocationInfo-r3-IEs ::= SEQUENCE {
— Non-RRC IEs
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
— If the extension v380 is included use the extension for the ciphering status per CN domain
cipheringStatus CipheringStatus,
— If ciphering status is started and the IE latestConfiguredCN-Domain should be included,
— the IE cn-DomainIdentity (in SRNC-RelocationInfo-v380ext-IEs) shall be used instead.
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
— The order of occurrence in the IE cipheringInfoPerRB-List is the
— same as the RBs in SRB-InformationSetupList in RAB-InformationSetupList.
— The signalling RBs are supposed to be listed
— first. Only UM and AM RBs that are ciphered are listed here
cipheringInfoPerRB-List CipheringInfoPerRB-List OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
integrityProtectionStatus IntegrityProtectionStatus,
— In the IE srb-SpecificIntegrityProtInfo, the first information listed corresponds to
— signalling radio bearer RB0 and after the order of occurrence is the same as the SRBs in
— SRB-InformationSetupList
— The target RNC may ignore the IE srb-SpecificIntegrityProtInfo if the
— IE integrityProtectionStatus has the value "not started".
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
ue-RadioAccessCapability UE-RadioAccessCapability,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationList OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList,
rab-InformationList RAB-InformationSetupList OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList OPTIONAL,
modeSpecificInfo CHOICE {
fdd SEQUENCE {
— dummy and dummy2 are not used in this version of the specification, they should
— not be sent and if received they should be ignored.
dummy CPCH-SetID OPTIONAL,
dummy2 DRAC-StaticInformationList OPTIONAL
},
tdd NULL
},
dl-CommonTransChInfo DL-CommonTransChInfo OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList OPTIONAL,
— Measurement report
measurementReport MeasurementReport OPTIONAL
}
SRNC-RelocationInfo-v380ext-IEs ::= SEQUENCE {
— Ciphering related information IEs
— In the SRNC-RelocationInfo-r3-IEs, the IE ‘cn-DomainIdentity’ is used to represent the
— IE ‘Latest configured CN domain’ in the tabular.
cn-DomainIdentity CN-DomainIdentity,
cipheringStatusList CipheringStatusList
}
SRNC-RelocationInfo-v390ext-IEs ::= SEQUENCE {
cn-DomainInformationList-v390ext CN-DomainInformationList-v390ext OPTIONAL,
ue-RadioAccessCapability-v370ext UE-RadioAccessCapability-v370ext OPTIONAL,
ue-RadioAccessCapability-v380ext UE-RadioAccessCapability-v380ext OPTIONAL,
dl-PhysChCapabilityFDD-v380ext DL-PhysChCapabilityFDD-v380ext,
failureCauseWithProtErr FailureCauseWithProtErr OPTIONAL
}
SRNC-RelocationInfo-v3a0ext-IEs ::= SEQUENCE {
cipheringInfoForSRB1-v3a0ext CipheringInfoPerRB-List-v3a0ext,
ue-RadioAccessCapability-v3a0ext UE-RadioAccessCapability-v3a0ext OPTIONAL,
— cn-domain identity for IE startValueForCiphering-v3a0ext is specified
— in subsequent extension (SRNC-RelocationInfo-v3b0ext-IEs)
startValueForCiphering-v3a0ext START-Value
}
SRNC-RelocationInfo-v3b0ext-IEs ::= SEQUENCE {
— cn-domain identity for IE startValueForCiphering-v3a0ext included in previous extension
cn-DomainIdentity CN-DomainIdentity,
— the IE startValueForCiphering-v3b0ext contains the start values for each CN Domain. The
— value of start indicated by the IE startValueForCiphering-v3a0ext should be set to the
— same value as the start-Value for the corresponding cn-DomainIdentity in the IE
— startValueForCiphering-v3b0ext
startValueForCiphering-v3b0ext STARTList2 OPTIONAL
}
SRNC-RelocationInfo-v3c0ext-IEs ::= SEQUENCE {
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL
}
SRNC-RelocationInfo-v3d0ext-IEs ::= SEQUENCE {
— User equipment IEs
uESpecificBehaviourInformation1idle UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT UESpecificBehaviourInformation1interRAT OPTIONAL
}
SRNC-RelocationInfo-v3g0ext-IEs ::= SEQUENCE {
ue-RadioAccessCapability-v3g0ext UE-RadioAccessCapability-v3g0ext OPTIONAL
}
SRNC-RelocationInfo-v3h0ext-IEs ::= SEQUENCE {
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL,
nonCriticalExtension SEQUENCE {} OPTIONAL
}
SRNC-RelocationInfo-v4d0ext-IEs ::= SEQUENCE {
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL
}
TPC-CombinationInfoList ::= SEQUENCE (SIZE (1..maxRL)) OF
TPC-Combination-Info
TPC-CombinationInfoList-r9 ::= SEQUENCE (SIZE (1..maxEDCHRL)) OF
TPC-Combination-Info-r9
STARTList2 ::= SEQUENCE (SIZE (2..maxCNdomains)) OF
STARTSingle
SRNC-RelocationInfo-v4b0ext-IEs ::= SEQUENCE {
ue-RadioAccessCapability-v4b0ext UE-RadioAccessCapability-v4b0ext OPTIONAL
}
SRNC-RelocationInfo-v590ext-IEs ::= SEQUENCE {
ue-RadioAccessCapability-v590ext UE-RadioAccessCapability-v590ext OPTIONAL,
ue-RATSpecificCapability-v590ext InterRAT-UE-RadioAccessCapability-v590ext OPTIONAL
}
SRNC-RelocationInfo-v5a0ext-IEs ::= SEQUENCE {
storedCompressedModeInfo StoredCompressedModeInfo OPTIONAL
}
SRNC-RelocationInfo-v5b0ext-IEs ::= SEQUENCE {
interRATCellInfoIndication InterRATCellInfoIndication OPTIONAL
}
SRNC-RelocationInfo-v5c0ext-IEs ::= SEQUENCE {
ue-RadioAccessCapability-v5c0ext UE-RadioAccessCapability-v5c0ext OPTIONAL
}
CipheringInfoPerRB-List-v3a0ext ::= SEQUENCE {
dl-UM-SN BIT STRING (SIZE (7))
}
CipheringStatusList ::= SEQUENCE (SIZE (1..maxCNdomains)) OF
CipheringStatusCNdomain
CipheringStatusCNdomain ::= SEQUENCE {
cn-DomainIdentity CN-DomainIdentity,
cipheringStatus CipheringStatus
}
CodeChangeStatusList ::= SEQUENCE (SIZE (1..maxRL)) OF
CodeChangeStatus
CodeChangeStatus ::= SEQUENCE {
primaryCPICH-Info PrimaryCPICH-Info,
scramblingCodeChange ScramblingCodeChange
}
StoredCompressedModeInfo ::= SEQUENCE {
storedTGP-SequenceList StoredTGP-SequenceList,
codeChangeStatusList CodeChangeStatusList OPTIONAL
}
StoredCompressedModeInfo-r8 ::= SEQUENCE {
storedTGP-SequenceList StoredTGP-SequenceList-r8,
codeChangeStatusList CodeChangeStatusList OPTIONAL
}
StoredTGP-SequenceList ::= SEQUENCE (SIZE (1..maxTGPS)) OF
StoredTGP-Sequence
StoredTGP-SequenceList-r8 ::= SEQUENCE (SIZE (1..maxTGPS)) OF
StoredTGP-Sequence-r8
StoredTGP-Sequence ::= SEQUENCE {
tgpsi TGPSI,
current-tgps-Status CHOICE {
active SEQUENCE {
tgcfn TGCFN
},
inactive NULL
},
tgps-ConfigurationParams TGPS-ConfigurationParams OPTIONAL
}
StoredTGP-Sequence-r8 ::= SEQUENCE {
tgpsi TGPSI,
current-tgps-Status CHOICE {
active SEQUENCE {
tgcfn TGCFN
},
inactive NULL
},
tgps-ConfigurationParams TGPS-ConfigurationParams-r8 OPTIONAL
}
SRNC-RelocationInfo-r4-IEs ::= SEQUENCE {
— Non-RRC IEs
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL,
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
cipheringStatusList CipheringStatusList-r4,
latestConfiguredCN-Domain CN-DomainIdentity,
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
cipheringInfoPerRB-List CipheringInfoPerRB-List-r4 OPTIONAL,
— Integrity protection related information IEs
integrityProtectionStatus IntegrityProtectionStatus,
— The target RNC may ignore the IE srb-SpecificIntegrityProtInfo if the
— IE integrityProtectionStatus has the value "not started".
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
ue-RadioAccessCapability UE-RadioAccessCapability-r4,
ue-RadioAccessCapability-ext UE-RadioAccessCapabBandFDDList OPTIONAL,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
uESpecificBehaviourInformation1idle UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT UESpecificBehaviourInformation1interRAT OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationListFull OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-r4 OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList,
rab-InformationList RAB-InformationSetupList-r4 OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo-r4 OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList OPTIONAL,
— ‘dummy’, ‘dummy1’ and ‘dummy2’ are not used in this version of the specification,
— they should not be sent and if received they should be ignored.
dummy CHOICE {
fdd SEQUENCE {
dummy1 CPCH-SetID OPTIONAL,
dummy2 DRAC-StaticInformationList OPTIONAL
},
tdd NULL
} OPTIONAL,
dl-CommonTransChInfo DL-CommonTransChInfo-r4 OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList-r4 OPTIONAL,
— Measurement report
measurementReport MeasurementReport OPTIONAL,
failureCause FailureCauseWithProtErr OPTIONAL
}
SRNC-RelocationInfo-r5-IEs ::= SEQUENCE {
— Non-RRC IEs
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL,
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
cipheringStatusList CipheringStatusList-r4,
latestConfiguredCN-Domain CN-DomainIdentity,
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
cipheringInfoPerRB-List CipheringInfoPerRB-List-r4 OPTIONAL,
— Integrity protection related information IEs
integrityProtectionStatus IntegrityProtectionStatus,
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList OPTIONAL,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
ue-RadioAccessCapability UE-RadioAccessCapability-r5,
ue-RadioAccessCapability-ext UE-RadioAccessCapabBandFDDList OPTIONAL,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
uESpecificBehaviourInformation1idle
UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT
UESpecificBehaviourInformation1interRAT OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList-r5 OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationListFull OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-r5 OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList-r5,
rab-InformationList RAB-InformationSetupList-r5 OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo-r4 OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList OPTIONAL,
— ‘dummy’, ‘dummy1’ and ‘dummy2’ are not used in this version of the specification,
— they should not be sent and if received they should be ignored.
dummy CHOICE {
fdd SEQUENCE {
dummy1 CPCH-SetID OPTIONAL,
dummy2 DRAC-StaticInformationList OPTIONAL
},
tdd NULL
} OPTIONAL,
dl-CommonTransChInfo DL-CommonTransChInfo-r4 OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList-r5 OPTIONAL,
— PhyCH IEs
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL,
— Measurement report
measurementReport MeasurementReport OPTIONAL,
— Other IEs
failureCause FailureCauseWithProtErr OPTIONAL
}
SRNC-RelocationInfo-v690ext-IEs ::= SEQUENCE {
— User equipment IEs
— IE ueCapabilityContainer is used for the transparent transfer of capability information
— received from the UE
ueCapabilityContainer BIT STRING
(CONTAINING UE-CapabilityContainer-IEs) OPTIONAL,
— IE ueCapabilityContainer-RSC and IE ueCapabilityContainer-UCI are used for the
— transparent transfer of capability information received from the UE that was introduced
— in a release independent manner, i.e., transferred within a VLEC. These UE capabilities
— are included both in the RRC CONNECTION SETUP COMPLETE and the UE CAPABILITY INFORMATION
— messages. Only the VLEC of one message needs to be included i.e. the one from these
— messages that was last received.
— Case 1: If the last received message was a RRC CONNECTION SETUP COMPLETE (RSC)
ueCapabilityContainer-RSC BIT STRING
(CONTAINING RRCConnectionSetupComplete-r3-add-ext-IEs) OPTIONAL,
— Case 2: If the last received message was a UE CAPABILITY INFORMATION (UCI)
ueCapabilityContainer-UCI BIT STRING
(CONTAINING UECapabilityInformation-r3-add-ext-IEs) OPTIONAL,
— Radio bearer IEs
rab-InformationSetupList RAB-InformationSetupList-r6-ext OPTIONAL,
— Measurement report
measuredResultsOnRACHinterFreq MeasuredResultsOnRACHinterFreq OPTIONAL,
— MBMS IEs
mbms-JoinedInformation MBMS-JoinedInformation-r6 OPTIONAL,
— Measurement IEs
intraFreqReportingCriteria IntraFreqReportingCriteria-r6-ext OPTIONAL
}
SRNC-RelocationInfo-r6-IEs ::= SEQUENCE {
— Non-RRC IEs
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL,
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
cipheringStatusList CipheringStatusList-r4,
latestConfiguredCN-Domain CN-DomainIdentity,
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
cipheringInfoPerRB-List CipheringInfoPerRB-List-r4 OPTIONAL,
— Integrity protection related information IEs
integrityProtectionStatus IntegrityProtectionStatus,
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList OPTIONAL,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
ue-RadioAccessCapability UE-RadioAccessCapability-r6,
ue-RadioAccessCapability-ext UE-RadioAccessCapabBandFDDList OPTIONAL,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
uESpecificBehaviourInformation1idle
UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT
UESpecificBehaviourInformation1interRAT OPTIONAL,
— IE ueCapabilityContainer is used for the transparent transfer of capability information
— received from the UE
ueCapabilityContainer BIT STRING
(CONTAINING UE-CapabilityContainer-IEs) OPTIONAL,
— IE ueCapabilityContainer-RSC and IE ueCapabilityContainer-UCI are used for the
— transparent transfer of capability information received from the UE that was introduced
— in a release independent manner, i.e., transferred within a VLEC. These UE capabilities
— are included both in the RRC CONNECTION SETUP COMPLETE and the UE CAPABILITY INFORMATION
— messages. Only the VLEC of one message needs to be included i.e. the one from these
— messages that was last received.
— Case 1: If the last received message was a RRC CONNECTION SETUP COMPLETE (RSC)
ueCapabilityContainer-RSC BIT STRING
(CONTAINING RRCConnectionSetupComplete-r3-add-ext-IEs) OPTIONAL,
— Case 2: If the last received message was a UE CAPABILITY INFORMATION (UCI)
ueCapabilityContainer-UCI BIT STRING
(CONTAINING UECapabilityInformation-r3-add-ext-IEs) OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList-r5 OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationListFull OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-r6 OPTIONAL,
interRATCellInfoIndication InterRATCellInfoIndication OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList-r6,
rab-InformationList RAB-InformationSetupList-r6 OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo-r4 OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList-r6 OPTIONAL,
dl-CommonTransChInfo DL-CommonTransChInfo-r4 OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList-r5 OPTIONAL,
— PhyCH IEs
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL,
storedCompressedModeInfo StoredCompressedModeInfo OPTIONAL,
— Measurement report
measurementReport BIT STRING
(CONTAINING MeasurementReport) OPTIONAL,
— Other IEs
failureCause FailureCauseWithProtErr OPTIONAL,
— MBMS IEs
mbms-JoinedInformation MBMS-JoinedInformation-r6 OPTIONAL
}
SRNC-RelocationInfo-r6-add-ext-IEs ::= SEQUENCE {
sRNC-RelocationInfo-v7e0ext SRNC-RelocationInfo-v7e0ext-IEs,
v7f0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v7f0ext SRNC-RelocationInfo-v7f0ext-IEs,
nonCriticalExtensions SEQUENCE {} OPTIONAL
} OPTIONAL
}
SRNC-RelocationInfo-v6b0ext-IEs ::= SEQUENCE {
— The order of the RABs in IE rab-InformationSetupListExt is the same as
— in IE rab-InformationSetupList that is included in this message
rab-InformationSetupListExt RAB-InformationSetupList-v6b0ext OPTIONAL,
mbmsSelectedServiceInfo MBMS-SelectedServiceInfo
}
SRNC-RelocationInfo-r7-IEs ::= SEQUENCE {
— Non-RRC IEs
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL,
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
cipheringStatusList CipheringStatusList-r4,
latestConfiguredCN-Domain CN-DomainIdentity,
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
cipheringInfoPerRB-List CipheringInfoPerRB-List-r4 OPTIONAL,
— Integrity protection related information IEs
integrityProtectionStatus IntegrityProtectionStatus,
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList OPTIONAL,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
— IE ‘UE-RadioAccessCapability-r6’ includes the Rel-5 radio access capability extensions
— and earlier. Rel-6 and later extensions are included in IE ‘UE-CapabilityContainer-IEs’.
ue-RadioAccessCapability UE-RadioAccessCapability-r6,
ue-RadioAccessCapability-ext UE-RadioAccessCapabBandFDDList OPTIONAL,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
uESpecificBehaviourInformation1idle
UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT
UESpecificBehaviourInformation1interRAT OPTIONAL,
— IE ueCapabilityContainer is used for the transparent transfer of capability information
— received from the UE
ueCapabilityContainer BIT STRING
(CONTAINING UE-CapabilityContainer-IEs) OPTIONAL,
— IE ueCapabilityContainer-RSC and IE ueCapabilityContainer-UCI are used for the
— transparent transfer of capability information received from the UE that was introduced
— in a release independent manner, i.e., transferred within a VLEC. These UE capabilities
— are included both in the RRC CONNECTION SETUP COMPLETE and the UE CAPABILITY INFORMATION
— messages. Only the VLEC of one message needs to be included i.e. the one from these
— messages that was last received.
— Case 1: If the last received message was a RRC CONNECTION SETUP COMPLETE (RSC)
ueCapabilityContainer-RSC BIT STRING
(CONTAINING RRCConnectionSetupComplete-r3-add-ext-IEs) OPTIONAL,
— Case 2: If the last received message was a UE CAPABILITY INFORMATION (UCI)
ueCapabilityContainer-UCI BIT STRING
(CONTAINING UECapabilityInformation-r3-add-ext-IEs) OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList-r5 OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
srns-t-305 T-305 OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationListFull OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-r7 OPTIONAL,
interRATCellInfoIndication InterRATCellInfoIndication OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList-r7,
rab-InformationList RAB-InformationSetupList-r7 OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo-r4 OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList-r7 OPTIONAL,
dl-CommonTransChInfo DL-CommonTransChInfo-r4 OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList-r7 OPTIONAL,
— PhyCH IEs
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL,
storedCompressedModeInfo StoredCompressedModeInfo OPTIONAL,
— Measurement report
measurementReport BIT STRING
(CONTAINING MeasurementReport) OPTIONAL,
— Other IEs
failureCause FailureCauseWithProtErr OPTIONAL,
— MBMS IEs
mbms-JoinedInformation MBMS-JoinedInformation-r6 OPTIONAL,
mbmsSelectedServiceInfo MBMS-SelectedServiceInfo OPTIONAL
}
SRNC-RelocationInfo-r7-add-ext-IEs ::= SEQUENCE {
sRNC-RelocationInfo-v7e0ext SRNC-RelocationInfo-v7e0ext-IEs,
v7f0NonCriticalExtensions SEQUENCE {
sRNC-RelocationInfo-v7f0ext SRNC-RelocationInfo-v7f0ext-IEs,
nonCriticalExtensions SEQUENCE {} OPTIONAL
} OPTIONAL
}
SRNC-RelocationInfo-v770ext-IEs ::= SEQUENCE {
thresholdSFN-GPS-TOW-us ThresholdSFN-GPS-TOW-us OPTIONAL,
srns-t-305 T-305 OPTIONAL
}
SRNC-RelocationInfo-v7e0ext-IEs ::= SEQUENCE {
— User equipment IEs
ue-RadioAccessCapability UE-RadioAccessCapability-v7e0ext
}
SRNC-RelocationInfo-v7f0ext-IEs ::= SEQUENCE {
— User equipment IEs
ue-RadioAccessCapability UE-RadioAccessCapability-v7f0ext OPTIONAL
}
SRNC-RelocationInfo-r8-IEs ::= SEQUENCE {
— Non-RRC IEs
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL,
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
cipheringStatusList CipheringStatusList-r4,
latestConfiguredCN-Domain CN-DomainIdentity,
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
cipheringInfoPerRB-List CipheringInfoPerRB-List-r4 OPTIONAL,
— Integrity protection related information IEs
integrityProtectionStatus IntegrityProtectionStatus,
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList OPTIONAL,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
— IE ‘UE-RadioAccessCapability-r6’ includes the Rel-5 radio access capability extensions
— and earlier. Rel-6 and later extensions are included in IE ‘UE-CapabilityContainer-IEs’.
ue-RadioAccessCapability UE-RadioAccessCapability-r6,
ue-RadioAccessCapability-ext UE-RadioAccessCapabBandFDDList OPTIONAL,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
uESpecificBehaviourInformation1idle
UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT
UESpecificBehaviourInformation1interRAT OPTIONAL,
— IE ueCapabilityContainer is used for the transparent transfer of capability information
— received from the UE
ueCapabilityContainer BIT STRING
(CONTAINING UE-CapabilityContainer-IEs) OPTIONAL,
— IE ueCapabilityContainer-RSC and IE ueCapabilityContainer-UCI are used for the
— transparent transfer of capability information received from the UE that was introduced
— in a release independent manner, i.e., transferred within a VLEC. These UE capabilities
— are included both in the RRC CONNECTION SETUP COMPLETE and the UE CAPABILITY INFORMATION
— messages. Only the VLEC of one message needs to be included i.e. the one from these
— messages that was last received.
— Case 1: If the last received message was a RRC CONNECTION SETUP COMPLETE (RSC)
ueCapabilityContainer-RSC BIT STRING
(CONTAINING RRCConnectionSetupComplete-r3-add-ext-IEs) OPTIONAL,
— Case 2: If the last received message was a UE CAPABILITY INFORMATION (UCI)
ueCapabilityContainer-UCI BIT STRING
(CONTAINING UECapabilityInformation-r3-add-ext-IEs) OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList-r5 OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
srns-t-305 T-305 OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationListFull OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-r8 OPTIONAL,
interRATCellInfoIndication InterRATCellInfoIndication OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList-r8,
rab-InformationList RAB-InformationSetupList-r8 OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo-r4 OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList-r8 OPTIONAL,
dl-CommonTransChInfo DL-CommonTransChInfo-r4 OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList-r7 OPTIONAL,
— PhyCH IEs
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL,
e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList OPTIONAL,
storedCompressedModeInfo StoredCompressedModeInfo-r8 OPTIONAL,
— Measurement report
measurementReport BIT STRING
(CONTAINING MeasurementReport) OPTIONAL,
— Other IEs
failureCause FailureCauseWithProtErr OPTIONAL,
ue-HistoryInformation UE-HistoryInformation OPTIONAL,
— MBMS IEs
mbms-JoinedInformation MBMS-JoinedInformation-r6 OPTIONAL,
mbmsSelectedServiceInfo MBMS-SelectedServiceInfo OPTIONAL
}
SRNC-RelocationInfo-v820ext-IEs ::= SEQUENCE {
— Radio bearer IEs
rab-InformationList RAB-InformationSetupList-v820ext OPTIONAL
}
SRNC-RelocationInfo-v860ext-IEs ::= SEQUENCE {
— PhyCH IEs
e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList OPTIONAL
}
SRNC-RelocationInfo-v8d0ext-IEs ::= SEQUENCE {
–Radio Bearer IEs
pdcp-ROHC-TargetMode PDCP-ROHC-TargetMode OPTIONAL
}
SRNC-RelocationInfo-r9-IEs ::= SEQUENCE {
— Non-RRC IEs
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL,
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
cipheringStatusList CipheringStatusList-r4,
latestConfiguredCN-Domain CN-DomainIdentity,
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
cipheringInfoPerRB-List CipheringInfoPerRB-List-r4 OPTIONAL,
— Integrity protection related information IEs
integrityProtectionStatus IntegrityProtectionStatus,
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList OPTIONAL,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
— IE ‘UE-RadioAccessCapability-r6’ includes the Rel-5 radio access capability extensions
— and earlier. Rel-6 and later extensions are included in IE ‘UE-CapabilityContainer-IEs’.
ue-RadioAccessCapability UE-RadioAccessCapability-r6,
ue-RadioAccessCapability-ext UE-RadioAccessCapabBandFDDList OPTIONAL,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
uESpecificBehaviourInformation1idle
UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT
UESpecificBehaviourInformation1interRAT OPTIONAL,
— IE ueCapabilityContainer is used for the transparent transfer of capability information
— received from the UE
ueCapabilityContainer BIT STRING
(CONTAINING UE-CapabilityContainer-IEs) OPTIONAL,
— IE ueCapabilityContainer-RSC and IE ueCapabilityContainer-UCI are used for the
— transparent transfer of capability information received from the UE that was introduced
— in a release independent manner, i.e., transferred within a VLEC. These UE capabilities
— are included both in the RRC CONNECTION SETUP COMPLETE and the UE CAPABILITY INFORMATION
— messages. Only the VLEC of one message needs to be included i.e. the one from these
— messages that was last received.
— Case 1: If the last received message was a RRC CONNECTION SETUP COMPLETE (RSC)
ueCapabilityContainer-RSC BIT STRING
(CONTAINING RRCConnectionSetupComplete-r3-add-ext-IEs) OPTIONAL,
— Case 2: If the last received message was a UE CAPABILITY INFORMATION (UCI)
ueCapabilityContainer-UCI BIT STRING
(CONTAINING UECapabilityInformation-r3-add-ext-IEs) OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList-r5 OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
srns-t-305 T-305 OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationListFull OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-r9 OPTIONAL,
interRATCellInfoIndication InterRATCellInfoIndication OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList-r8,
rab-InformationList RAB-InformationSetupList-r8 OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo-r4 OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList-r8 OPTIONAL,
dl-CommonTransChInfo DL-CommonTransChInfo-r4 OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList-r9 OPTIONAL,
— PhyCH IEs
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL,
e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList OPTIONAL,
storedCompressedModeInfo StoredCompressedModeInfo-r8 OPTIONAL,
secondary-tpc-CombinationInfoList TPC-CombinationInfoList-r9 OPTIONAL,
secondary-e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList-r9 OPTIONAL,
— Measurement report
measurementReport BIT STRING
(CONTAINING MeasurementReport) OPTIONAL,
— Other IEs
failureCause FailureCauseWithProtErr OPTIONAL,
ue-HistoryInformation UE-HistoryInformation OPTIONAL,
— MBMS IEs
mbms-JoinedInformation MBMS-JoinedInformation-r6 OPTIONAL,
mbmsSelectedServiceInfo MBMS-SelectedServiceInfo OPTIONAL
}
SRNC-RelocationInfo-v970ext-IEs ::= SEQUENCE {
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-v970ext-IE OPTIONAL
}
SRNC-RelocationInfo-v9c0ext-IEs ::= SEQUENCE {
— For 1.28Mcps TDD only
dl-AddReconfTransChInfoList DL-AddReconfTransChInfoList-TDD128-v9c0ext OPTIONAL
}
SRNC-RelocationInfo-r10-IEs ::= SEQUENCE {
— Non-RRC IEs
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL,
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
cipheringStatusList CipheringStatusList-r4,
latestConfiguredCN-Domain CN-DomainIdentity,
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
cipheringInfoPerRB-List CipheringInfoPerRB-List-r4 OPTIONAL,
— Integrity protection related information IEs
integrityProtectionStatus IntegrityProtectionStatus,
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList OPTIONAL,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
— IE ‘UE-RadioAccessCapability-r6’ includes the Rel-5 radio access capability extensions
— and earlier. Rel-6 and later extensions are included in IE ‘UE-CapabilityContainer-IEs’.
ue-RadioAccessCapability UE-RadioAccessCapability-r6,
ue-RadioAccessCapability-ext UE-RadioAccessCapabBandFDDList OPTIONAL,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
uESpecificBehaviourInformation1idle
UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT
UESpecificBehaviourInformation1interRAT OPTIONAL,
— IE ueCapabilityContainer is used for the transparent transfer of capability information
— received from the UE
ueCapabilityContainer BIT STRING
(CONTAINING UE-CapabilityContainer-IEs) OPTIONAL,
— IE ueCapabilityContainer-RSC and IE ueCapabilityContainer-UCI are used for the
— transparent transfer of capability information received from the UE that was introduced
— in a release independent manner, i.e., transferred within a VLEC. These UE capabilities
— are included both in the RRC CONNECTION SETUP COMPLETE and the UE CAPABILITY INFORMATION
— messages. Only the VLEC of one message needs to be included i.e. the one from these
— messages that was last received.
— Case 1: If the last received message was a RRC CONNECTION SETUP COMPLETE (RSC)
ueCapabilityContainer-RSC BIT STRING
(CONTAINING RRCConnectionSetupComplete-r3-add-ext-IEs) OPTIONAL,
— Case 2: If the last received message was a UE CAPABILITY INFORMATION (UCI)
ueCapabilityContainer-UCI BIT STRING
(CONTAINING UECapabilityInformation-r3-add-ext-IEs) OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList-r5 OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
srns-t-305 T-305 OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationListFull OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-r10 OPTIONAL,
interRATCellInfoIndication InterRATCellInfoIndication OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList-r8,
rab-InformationList RAB-InformationSetupList-r8 OPTIONAL,
pdcp-ROHC-TargetMode PDCP-ROHC-TargetMode OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo-r4 OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList-r8 OPTIONAL,
dl-CommonTransChInfo DL-CommonTransChInfo-r4 OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList-r9 OPTIONAL,
— PhyCH IEs
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL,
e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList OPTIONAL,
storedCompressedModeInfo StoredCompressedModeInfo-r8 OPTIONAL,
secondary-tpc-CombinationInfoList TPC-CombinationInfoList-r9 OPTIONAL,
secondary-e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList-r9 OPTIONAL,
— Measurement report
measurementReport BIT STRING
(CONTAINING MeasurementReport) OPTIONAL,
— Other IEs
failureCause FailureCauseWithProtErr OPTIONAL,
ue-HistoryInformation UE-HistoryInformation OPTIONAL,
— MBMS IEs
mbms-JoinedInformation MBMS-JoinedInformation-r6 OPTIONAL,
mbmsSelectedServiceInfo MBMS-SelectedServiceInfo OPTIONAL
}
SRNC-RelocationInfo-vab0ext-IEs ::= SRNC-RelocationInfo-v970ext-IEs
SRNC-RelocationInfo-r11-IEs ::= SEQUENCE {
— Non-RRC IEs
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL,
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
cipheringStatusList CipheringStatusList-r4,
latestConfiguredCN-Domain CN-DomainIdentity,
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
cipheringInfoPerRB-List CipheringInfoPerRB-List-r4 OPTIONAL,
— Integrity protection related information IEs
integrityProtectionStatus IntegrityProtectionStatus,
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList OPTIONAL,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
— IE ‘UE-RadioAccessCapability-r6’ includes the Rel-5 radio access capability extensions
— and earlier. Rel-6 and later extensions are included in IE ‘UE-CapabilityContainer-IEs’.
ue-RadioAccessCapability UE-RadioAccessCapability-r6,
ue-RadioAccessCapability-ext UE-RadioAccessCapabBandFDDList OPTIONAL,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
uESpecificBehaviourInformation1idle
UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT
UESpecificBehaviourInformation1interRAT OPTIONAL,
— IE ueCapabilityContainer is used for the transparent transfer of capability information
— received from the UE
ueCapabilityContainer BIT STRING
(CONTAINING UE-CapabilityContainer-IEs) OPTIONAL,
— IE ueCapabilityContainer-RSC and IE ueCapabilityContainer-UCI are used for the
— transparent transfer of capability information received from the UE that was introduced
— in a release independent manner, i.e., transferred within a VLEC. These UE capabilities
— are included both in the RRC CONNECTION SETUP COMPLETE and the UE CAPABILITY INFORMATION
— messages. Only the VLEC of one message needs to be included i.e. the one from these
— messages that was last received.
— Case 1: If the last received message was a RRC CONNECTION SETUP COMPLETE (RSC)
ueCapabilityContainer-RSC BIT STRING
(CONTAINING RRCConnectionSetupComplete-r3-add-ext-IEs) OPTIONAL,
— Case 2: If the last received message was a UE CAPABILITY INFORMATION (UCI)
ueCapabilityContainer-UCI BIT STRING
(CONTAINING UECapabilityInformation-r3-add-ext-IEs) OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList-r5 OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
srns-t-305 T-305 OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationListFull OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-r11 OPTIONAL,
interRATCellInfoIndication InterRATCellInfoIndication OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList-r11,
rab-InformationList RAB-InformationSetupList-r11 OPTIONAL,
pdcp-ROHC-TargetMode PDCP-ROHC-TargetMode OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo-r4 OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList-r8 OPTIONAL,
dl-CommonTransChInfo DL-CommonTransChInfo-r4 OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList-r11 OPTIONAL,
— PhyCH IEs
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL,
e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList OPTIONAL,
storedCompressedModeInfo StoredCompressedModeInfo-r8 OPTIONAL,
secondary-tpc-CombinationInfoList TPC-CombinationInfoList-r9 OPTIONAL,
secondary-e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList-r9 OPTIONAL,
— Measurement report
measurementReport BIT STRING
(CONTAINING MeasurementReport) OPTIONAL,
— Other IEs
failureCause FailureCauseWithProtErr OPTIONAL,
ue-HistoryInformation UE-HistoryInformation OPTIONAL,
— MBMS IEs
mbms-JoinedInformation MBMS-JoinedInformation-r6 OPTIONAL,
mbmsSelectedServiceInfo MBMS-SelectedServiceInfo OPTIONAL
}
SRNC-RelocationInfo-r12-IEs ::= SEQUENCE {
— Non-RRC IEs
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL,
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
cipheringStatusList CipheringStatusList-r4,
latestConfiguredCN-Domain CN-DomainIdentity,
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
cipheringInfoPerRB-List CipheringInfoPerRB-List-r4 OPTIONAL,
— Integrity protection related information IEs
integrityProtectionStatus IntegrityProtectionStatus,
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList OPTIONAL,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
— IE ‘UE-RadioAccessCapability-r6’ includes the Rel-5 radio access capability extensions
— and earlier. Rel-6 and later extensions are included in IE ‘UE-CapabilityContainer-IEs’.
ue-RadioAccessCapability UE-RadioAccessCapability-r6,
ue-RadioAccessCapability-ext UE-RadioAccessCapabBandFDDList OPTIONAL,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
uESpecificBehaviourInformation1idle
UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT
UESpecificBehaviourInformation1interRAT OPTIONAL,
— IE ueCapabilityContainer is used for the transparent transfer of capability information
— received from the UE
ueCapabilityContainer BIT STRING
(CONTAINING UE-CapabilityContainer-IEs) OPTIONAL,
— IE ueCapabilityContainer-RSC and IE ueCapabilityContainer-UCI are used for the
— transparent transfer of capability information received from the UE that was introduced
— in a release independent manner, i.e., transferred within a VLEC. These UE capabilities
— are included both in the RRC CONNECTION SETUP COMPLETE and the UE CAPABILITY INFORMATION
— messages. Only the VLEC of one message needs to be included i.e. the one from these
— messages that was last received.
— Case 1: If the last received message was a RRC CONNECTION SETUP COMPLETE (RSC)
ueCapabilityContainer-RSC BIT STRING
(CONTAINING RRCConnectionSetupComplete-r3-add-ext-IEs) OPTIONAL,
— Case 2: If the last received message was a UE CAPABILITY INFORMATION (UCI)
ueCapabilityContainer-UCI BIT STRING
(CONTAINING UECapabilityInformation-r3-add-ext-IEs) OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList-r5 OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
srns-t-305 T-305 OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationListFull OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-r12 OPTIONAL,
interRATCellInfoIndication InterRATCellInfoIndication OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList-r11,
rab-InformationList RAB-InformationSetupList-r11 OPTIONAL,
pdcp-ROHC-TargetMode PDCP-ROHC-TargetMode OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo-r12 OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList-r8 OPTIONAL,
dl-CommonTransChInfo DL-CommonTransChInfo-r4 OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList-r11 OPTIONAL,
— PhyCH IEs
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL,
e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList OPTIONAL,
storedCompressedModeInfo StoredCompressedModeInfo-r8 OPTIONAL,
secondary-tpc-CombinationInfoList TPC-CombinationInfoList-r9 OPTIONAL,
secondary-e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList-r9 OPTIONAL,
serving-HSDSCH-CellInformation Serving-HSDSCH-CellInformation-r12 OPTIONAL,
dtx-drx-Info DTX-DRX-Info-r12 OPTIONAL,
ul-SecondaryCellInfoFDD UL-SecondaryCellInfoFDD-r12 OPTIONAL,
dch-Enhancements-Info-FDD DCH-Enhancements-Info-FDD OPTIONAL,
dl-CommonInformation DL-CommonInformation-r12 OPTIONAL,
dl-InformationPerRL-List DL-InformationPerRL-List-r12 OPTIONAL,
— Measurement report
measurementReport BIT STRING
(CONTAINING MeasurementReport) OPTIONAL,
— Other IEs
failureCause FailureCauseWithProtErr OPTIONAL,
ue-HistoryInformation UE-HistoryInformation OPTIONAL,
— MBMS IEs
mbms-JoinedInformation MBMS-JoinedInformation-r6 OPTIONAL,
mbmsSelectedServiceInfo MBMS-SelectedServiceInfo OPTIONAL
}
SRNC-RelocationInfo-r13-IEs ::= SEQUENCE {
— Non-RRC IEs
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL,
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
cipheringStatusList CipheringStatusList-r4,
latestConfiguredCN-Domain CN-DomainIdentity,
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
cipheringInfoPerRB-List CipheringInfoPerRB-List-r4 OPTIONAL,
— Integrity protection related information IEs
integrityProtectionStatus IntegrityProtectionStatus,
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList OPTIONAL,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
— IE ‘UE-RadioAccessCapability-r6’ includes the Rel-5 radio access capability
— extensions and earlier. Rel-6 and later extensions are included in IE ‘UE-CapabilityContainer-IEs’.
ue-RadioAccessCapability UE-RadioAccessCapability-r6,
ue-RadioAccessCapability-ext UE-RadioAccessCapabBandFDDList OPTIONAL,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
uESpecificBehaviourInformation1idle
UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT
UESpecificBehaviourInformation1interRAT OPTIONAL,
— IE ueCapabilityContainer is used for the transparent transfer of capability
— information received from the UE
ueCapabilityContainer BIT STRING
(CONTAINING UE-CapabilityContainer-IEs) OPTIONAL,
— IE ueCapabilityContainer-RSC and IE ueCapabilityContainer-UCI are used for the
— transparent transfer of capability information received from the UE that was
— introduced in a release independent manner, i.e., transferred within a VLEC.
— These UE capabilities are included both in the RRC CONNECTION SETUP COMPLETE and
— the UE CAPABILITY INFORMATION messages.
— Only the VLEC of one message needs to be included i.e. the one from these
— messages that was last received.
— Case 1: If the last received message was a RRC CONNECTION SETUP COMPLETE (RSC)
ueCapabilityContainer-RSC BIT STRING
(CONTAINING RRCConnectionSetupComplete-r3-add-ext-IEs) OPTIONAL,
— Case 2: If the last received message was a UE CAPABILITY INFORMATION (UCI)
ueCapabilityContainer-UCI BIT STRING
(CONTAINING UECapabilityInformation-r3-add-ext-IEs) OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList-r5 OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
srns-t-305 T-305 OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationListFull OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-r13 OPTIONAL,
interRATCellInfoIndication InterRATCellInfoIndication OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList-r11,
rab-InformationList RAB-InformationSetupList-r11 OPTIONAL,
pdcp-ROHC-TargetMode PDCP-ROHC-TargetMode OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo-r12 OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList-r8 OPTIONAL,
dl-CommonTransChInfo DL-CommonTransChInfo-r4 OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList-r11 OPTIONAL,
— PhyCH IEs
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL,
e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList OPTIONAL,
storedCompressedModeInfo StoredCompressedModeInfo-r8 OPTIONAL,
secondary-tpc-CombinationInfoList TPC-CombinationInfoList-r9 OPTIONAL,
secondary-e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList-r9 OPTIONAL,
serving-HSDSCH-CellInformation Serving-HSDSCH-CellInformation-r12 OPTIONAL,
dtx-drx-Info DTX-DRX-Info-r12 OPTIONAL,
ul-SecondaryCellInfoFDD UL-SecondaryCellInfoFDD-r13 OPTIONAL,
dch-Enhancements-Info-FDD DCH-Enhancements-Info-FDD OPTIONAL,
dl-CommonInformation DL-CommonInformation-r12 OPTIONAL,
dl-InformationPerRL-List DL-InformationPerRL-List-r13 OPTIONAL,
— Measurement report
measurementReport BIT STRING
(CONTAINING MeasurementReport) OPTIONAL,
— Other IEs
failureCause FailureCauseWithProtErr OPTIONAL,
ue-HistoryInformation UE-HistoryInformation OPTIONAL,
— MBMS IEs
mbms-JoinedInformation MBMS-JoinedInformation-r6 OPTIONAL,
mbmsSelectedServiceInfo MBMS-SelectedServiceInfo OPTIONAL
}
SRNC-RelocationInfo-LaterCriticalExtensions ::= SEQUENCE {
criticalExtensions CHOICE {
r14 SEQUENCE {
sRNC-RelocationInfo-r14 SRNC-RelocationInfo-r14-IEs,
sRNC-RelocationInfo-r14-add-ext BIT STRING OPTIONAL,
nonCriticalExtensions SEQUENCE {} OPTIONAL
},
sRNC-RelocationInfo-CriticalExtensions-r15-IEs SRNC-RelocationInfo-CriticalExtensions-r15-IEs
}
}
SRNC-RelocationInfo-CriticalExtensions-r15-IEs ::= SEQUENCE {
criticalExtensions CHOICE {
r15 SEQUENCE {
sRNC-RelocationInfo-r15 SRNC-RelocationInfo-r15-IEs,
sRNC-RelocationInfo-r15-add-ext BIT STRING OPTIONAL,
nonCriticalExtensions SEQUENCE {} OPTIONAL
},
criticalExtensions SEQUENCE {}
}
}
SRNC-RelocationInfo-r14-IEs ::= SEQUENCE {
— Non-RRC IEs
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL,
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
cipheringStatusList CipheringStatusList-r4,
latestConfiguredCN-Domain CN-DomainIdentity,
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
cipheringInfoPerRB-List CipheringInfoPerRB-List-r4 OPTIONAL,
— Integrity protection related information IEs
integrityProtectionStatus IntegrityProtectionStatus,
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList OPTIONAL,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
— IE ‘UE-RadioAccessCapability-r6’ includes the Rel-5 radio access capability
— extensions and earlier. Rel-6 and later extensions are included in IE ‘UE-CapabilityContainer-IEs’.
ue-RadioAccessCapability UE-RadioAccessCapability-r6,
ue-RadioAccessCapability-ext UE-RadioAccessCapabBandFDDList OPTIONAL,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
uESpecificBehaviourInformation1idle
UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT
UESpecificBehaviourInformation1interRAT OPTIONAL,
— IE ueCapabilityContainer is used for the transparent transfer of capability
— information received from the UE
ueCapabilityContainer BIT STRING
(CONTAINING UE-CapabilityContainer-IEs) OPTIONAL,
— IE ueCapabilityContainer-RSC and IE ueCapabilityContainer-UCI are used for the
— transparent transfer of capability information received from the UE that was
— introduced in a release independent manner, i.e., transferred within a VLEC.
— These UE capabilities are included both in the RRC CONNECTION SETUP COMPLETE and
— the UE CAPABILITY INFORMATION messages.
— Only the VLEC of one message needs to be included i.e. the one from these
— messages that was last received.
— Case 1: If the last received message was a RRC CONNECTION SETUP COMPLETE (RSC)
ueCapabilityContainer-RSC BIT STRING
(CONTAINING RRCConnectionSetupComplete-r3-add-ext-IEs) OPTIONAL,
— Case 2: If the last received message was a UE CAPABILITY INFORMATION (UCI)
ueCapabilityContainer-UCI BIT STRING
(CONTAINING UECapabilityInformation-r3-add-ext-IEs) OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList-r5 OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
srns-t-305 T-305 OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationListFull OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-r14 OPTIONAL,
interRATCellInfoIndication InterRATCellInfoIndication OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList-r11,
rab-InformationList RAB-InformationSetupList-r11 OPTIONAL,
pdcp-ROHC-TargetMode PDCP-ROHC-TargetMode OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo-r12 OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList-r8 OPTIONAL,
dl-CommonTransChInfo DL-CommonTransChInfo-r4 OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList-r11 OPTIONAL,
— PhyCH IEs
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL,
e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList OPTIONAL,
storedCompressedModeInfo StoredCompressedModeInfo-r8 OPTIONAL,
secondary-tpc-CombinationInfoList TPC-CombinationInfoList-r9 OPTIONAL,
secondary-e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList-r9 OPTIONAL,
serving-HSDSCH-CellInformation Serving-HSDSCH-CellInformation-r12 OPTIONAL,
dtx-drx-Info DTX-DRX-Info-r12 OPTIONAL,
ul-SecondaryCellInfoFDD UL-SecondaryCellInfoFDD-r13 OPTIONAL,
dch-Enhancements-Info-FDD DCH-Enhancements-Info-FDD OPTIONAL,
dl-CommonInformation DL-CommonInformation-r12 OPTIONAL,
dl-InformationPerRL-List DL-InformationPerRL-List-r13 OPTIONAL,
— Measurement report
measurementReport BIT STRING
(CONTAINING MeasurementReport) OPTIONAL,
— Other IEs
failureCause FailureCauseWithProtErr OPTIONAL,
ue-HistoryInformation UE-HistoryInformation OPTIONAL,
— MBMS IEs
mbms-JoinedInformation MBMS-JoinedInformation-r6 OPTIONAL,
mbmsSelectedServiceInfo MBMS-SelectedServiceInfo OPTIONAL
}
SRNC-RelocationInfo-r15-IEs ::= SEQUENCE {
— Non-RRC IEs
— IE rb-IdentityForHOMessage includes the identity of the RB used by the source SRNC
— to send the message contained in the IE "TargetRNC-ToSourceRNC-Container".
— Only included if type is "UE involved"
rb-IdentityForHOMessage RB-Identity OPTIONAL,
stateOfRRC StateOfRRC,
stateOfRRC-Procedure StateOfRRC-Procedure,
— Ciphering related information IEs
cipheringStatusList CipheringStatusList-r4,
latestConfiguredCN-Domain CN-DomainIdentity,
calculationTimeForCiphering CalculationTimeForCiphering OPTIONAL,
count-C-List COUNT-C-List OPTIONAL,
cipheringInfoPerRB-List CipheringInfoPerRB-List-r4 OPTIONAL,
— Integrity protection related information IEs
integrityProtectionStatus IntegrityProtectionStatus,
srb-SpecificIntegrityProtInfo SRB-SpecificIntegrityProtInfoList OPTIONAL,
implementationSpecificParams ImplementationSpecificParams OPTIONAL,
— User equipment IEs
u-RNTI U-RNTI,
c-RNTI C-RNTI OPTIONAL,
— IE ‘UE-RadioAccessCapability-r6’ includes the Rel-5 radio access capability
— extensions and earlier. Rel-6 and later extensions are included in IE ‘UE-CapabilityContainer-IEs’.
ue-RadioAccessCapability UE-RadioAccessCapability-r6,
ue-RadioAccessCapability-ext UE-RadioAccessCapabBandFDDList OPTIONAL,
ue-Positioning-LastKnownPos UE-Positioning-LastKnownPos OPTIONAL,
uESpecificBehaviourInformation1idle
UESpecificBehaviourInformation1idle OPTIONAL,
uESpecificBehaviourInformation1interRAT
UESpecificBehaviourInformation1interRAT OPTIONAL,
— IE ueCapabilityContainer is used for the transparent transfer of capability
— information received from the UE
ueCapabilityContainer BIT STRING
(CONTAINING UE-CapabilityContainer-IEs) OPTIONAL,
— IE ueCapabilityContainer-RSC and IE ueCapabilityContainer-UCI are used for the
— transparent transfer of capability information received from the UE that was
— introduced in a release independent manner, i.e., transferred within a VLEC.
— These UE capabilities are included both in the RRC CONNECTION SETUP COMPLETE and
— the UE CAPABILITY INFORMATION messages.
— Only the VLEC of one message needs to be included i.e. the one from these
— messages that was last received.
— Case 1: If the last received message was a RRC CONNECTION SETUP COMPLETE (RSC)
ueCapabilityContainer-RSC BIT STRING
(CONTAINING RRCConnectionSetupComplete-r3-add-ext-IEs) OPTIONAL,
— Case 2: If the last received message was a UE CAPABILITY INFORMATION (UCI)
ueCapabilityContainer-UCI BIT STRING
(CONTAINING UECapabilityInformation-r3-add-ext-IEs) OPTIONAL,
— Other IEs
ue-RATSpecificCapability InterRAT-UE-RadioAccessCapabilityList-r5 OPTIONAL,
— UTRAN mobility IEs
ura-Identity URA-Identity OPTIONAL,
srns-t-305 T-305 OPTIONAL,
— Core network IEs
cn-CommonGSM-MAP-NAS-SysInfo NAS-SystemInformationGSM-MAP,
cn-DomainInformationList CN-DomainInformationListFull OPTIONAL,
— Measurement IEs
ongoingMeasRepList OngoingMeasRepList-r15 OPTIONAL,
interRATCellInfoIndication InterRATCellInfoIndication OPTIONAL,
— Radio bearer IEs
predefinedConfigStatusList PredefinedConfigStatusList,
srb-InformationList SRB-InformationSetupList-r11,
rab-InformationList RAB-InformationSetupList-r11 OPTIONAL,
pdcp-ROHC-TargetMode PDCP-ROHC-TargetMode OPTIONAL,
— Transport channel IEs
ul-CommonTransChInfo UL-CommonTransChInfo-r12 OPTIONAL,
ul-TransChInfoList UL-AddReconfTransChInfoList-r8 OPTIONAL,
dl-CommonTransChInfo DL-CommonTransChInfo-r4 OPTIONAL,
dl-TransChInfoList DL-AddReconfTransChInfoList-r11 OPTIONAL,
— PhyCH IEs
tpc-CombinationInfoList TPC-CombinationInfoList OPTIONAL,
e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList OPTIONAL,
storedCompressedModeInfo StoredCompressedModeInfo-r8 OPTIONAL,
secondary-tpc-CombinationInfoList TPC-CombinationInfoList-r9 OPTIONAL,
secondary-e-RGCH-CombinationInfoList E-RGCH-CombinationInfoList-r9 OPTIONAL,
serving-HSDSCH-CellInformation Serving-HSDSCH-CellInformation-r12 OPTIONAL,
dtx-drx-Info DTX-DRX-Info-r12 OPTIONAL,
ul-SecondaryCellInfoFDD UL-SecondaryCellInfoFDD-r13 OPTIONAL,
dch-Enhancements-Info-FDD DCH-Enhancements-Info-FDD OPTIONAL,
dl-CommonInformation DL-CommonInformation-r12 OPTIONAL,
dl-InformationPerRL-List DL-InformationPerRL-List-r13 OPTIONAL,
— Measurement report
measurementReport BIT STRING
(CONTAINING MeasurementReport) OPTIONAL,
— Other IEs
failureCause FailureCauseWithProtErr OPTIONAL,
ue-HistoryInformation UE-HistoryInformation OPTIONAL,
— MBMS IEs
mbms-JoinedInformation MBMS-JoinedInformation-r6 OPTIONAL,
mbmsSelectedServiceInfo MBMS-SelectedServiceInfo OPTIONAL
}
— IE definitions
CalculationTimeForCiphering ::= SEQUENCE {
cell-Id CellIdentity,
sfn INTEGER (0..4095)
}
CipheringInfoPerRB ::= SEQUENCE {
dl-HFN BIT STRING (SIZE (20..25)),
ul-HFN BIT STRING (SIZE (20..25))
}
CipheringInfoPerRB-r4 ::= SEQUENCE {
rb-Identity RB-Identity,
dl-HFN BIT STRING (SIZE (20..25)),
dl-UM-SN BIT STRING (SIZE (7)) OPTIONAL,
ul-HFN BIT STRING (SIZE (20..25))
}
— TABULAR: CipheringInfoPerRB-List, multiplicity value numberOfRadioBearers
— has been replaced with maxRB.
CipheringInfoPerRB-List ::= SEQUENCE (SIZE (1..maxRB)) OF
CipheringInfoPerRB
CipheringInfoPerRB-List-r4 ::= SEQUENCE (SIZE (1..maxRB)) OF
CipheringInfoPerRB-r4
CipheringStatus ::= ENUMERATED {
started, notStarted }
CipheringStatusList-r4 ::= SEQUENCE (SIZE (1..maxCNdomains)) OF
CipheringStatusCNdomain-r4
CipheringStatusCNdomain-r4 ::= SEQUENCE {
cn-DomainIdentity CN-DomainIdentity,
cipheringStatus CipheringStatus,
start-Value START-Value
}
CN-DomainInformation-v390ext ::= SEQUENCE {
cn-DRX-CycleLengthCoeff CN-DRX-CycleLengthCoefficient
}
CN-DomainInformationList-v390ext ::= SEQUENCE (SIZE (1..maxCNdomains)) OF
CN-DomainInformation-v390ext
CompressedModeMeasCapability-r4 ::= SEQUENCE {
fdd-Measurements BOOLEAN,
— TABULAR: The IEs tdd-Measurements, gsm-Measurements and multiCarrierMeasurements
— are made optional since they are conditional based on another information element.
— Their absence corresponds to the case where the condition is not true.
tdd384-Measurements BOOLEAN OPTIONAL,
tdd128-Measurements BOOLEAN OPTIONAL,
gsm-Measurements GSM-Measurements OPTIONAL,
multiCarrierMeasurements BOOLEAN OPTIONAL
}
COUNT-C-List ::= SEQUENCE (SIZE (1..maxCNdomains)) OF
COUNT-CSingle
COUNT-CSingle ::= SEQUENCE {
cn-DomainIdentity CN-DomainIdentity,
count-C BIT STRING (SIZE (32))
}
DL-PhysChCapabilityFDD-r4 ::= SEQUENCE {
— The IE "maxNoDPCH-PDSCH-Codes" only gives information on the maximum number of DPCH Codes.
maxNoDPCH-PDSCH-Codes INTEGER (1..8),
maxNoPhysChBitsReceived MaxNoPhysChBitsReceived,
supportForSF-512 BOOLEAN,
— dummy, dummy2 and dummy3 are not used in this version of the specification
— and if received they should be ignored.
dummy BOOLEAN,
dummy2 SimultaneousSCCPCH-DPCH-Reception,
dummy3 SupportOfDedicatedPilotsForChEstimation OPTIONAL
}
DL-PhysChCapabilityFDD-r5 ::= SEQUENCE {
— The IE "maxNoDPCH-PDSCH-Codes" only gives information on the maximum number of DPCH Codes.
maxNoDPCH-PDSCH-Codes INTEGER (1..8),
maxNoPhysChBitsReceived MaxNoPhysChBitsReceived,
supportForSF-512 BOOLEAN,
— dummy, dumy2 and dummy3 are not used in this version of the specification
— and if received they should be ignored.
dummy BOOLEAN,
dummy2 SimultaneousSCCPCH-DPCH-Reception,
dummy3 SupportOfDedicatedPilotsForChEstimation OPTIONAL,
fdd-hspdsch CHOICE {
supported SEQUENCE {
hsdsch-physical-layer-category HSDSCH-physical-layer-category,
— dummy and dummy2 are not used in this version of the specification
— and if received they should be ignored.
dummy BOOLEAN,
dummy2 BOOLEAN
},
unsupported NULL
}
}
DL-PhysChCapabilityTDD-r5 ::= SEQUENCE {
maxTS-PerFrame MaxTS-PerFrame,
maxPhysChPerFrame MaxPhysChPerFrame,
minimumSF MinimumSF-DL,
supportOfPDSCH BOOLEAN,
maxPhysChPerTS MaxPhysChPerTS,
tdd384-hspdsch CHOICE {
supported HSDSCH-physical-layer-category,
unsupported NULL
}
}
DL-PhysChCapabilityTDD-LCR-r5 ::= SEQUENCE {
maxTS-PerSubFrame MaxTS-PerSubFrame-r4,
maxPhysChPerFrame MaxPhysChPerSubFrame-r4,
minimumSF MinimumSF-DL,
supportOfPDSCH BOOLEAN,
maxPhysChPerTS MaxPhysChPerTS,
supportOf8PSK BOOLEAN,
tdd128-hspdsch CHOICE {
supported HSDSCH-physical-layer-category,
unsupported NULL
}
}
DL-RFC3095-Context ::= SEQUENCE {
rfc3095-Context-Identity INTEGER (0..16383),
dl-mode ENUMERATED {u, o, r},
dl-ref-ir OCTET STRING ( SIZE (1..3000)),
dl-ref-time INTEGER (0..4294967295) OPTIONAL,
dl-curr-time INTEGER (0..4294967295) OPTIONAL,
dl-syn-offset-id INTEGER (0..65535) OPTIONAL,
dl-syn-slope-ts INTEGER (0..4294967295) OPTIONAL,
dl-dyn-changed BOOLEAN
}
E-RGCH-Combination-Info ::= SEQUENCE{
primaryCPICH-Info PrimaryCPICH-Info,
rg-CombinationIndex INTEGER (0..5)
}
E-RGCH-Combination-Info-r9 ::= SEQUENCE{
primaryCPICH-Info PrimaryCPICH-Info,
rg-CombinationIndex INTEGER (0..5)
}
E-RGCH-CombinationInfoList ::= SEQUENCE (SIZE (1..maxEDCHRL)) OF
E-RGCH-Combination-Info
E-RGCH-CombinationInfoList-r9 ::= SEQUENCE (SIZE (1..maxEDCHRL)) OF
E-RGCH-Combination-Info-r9
ImplementationSpecificParams ::= BIT STRING (SIZE (1..512))
IntegrityProtectionStatus ::= ENUMERATED {
started, notStarted }
InterRAT-UE-RadioAccessCapabilityList-r5 ::= SEQUENCE {
interRAT-UE-RadioAccessCapability InterRAT-UE-RadioAccessCapabilityList,
geranIu-RadioAccessCapability GERANIu-RadioAccessCapability OPTIONAL
}
IntraFreqReportingCriteria-r6-ext ::= SEQUENCE {
— The content of the v690 non-critical extension should be
— considered as an extension of IE IntraFreqEventCriteriaList
event Event1j-r6,
hysteresis Hysteresis,
timeToTrigger TimeToTrigger,
reportingCellStatus ReportingCellStatus OPTIONAL
}
— dummy is not used in this version of the specification, it should
— not be sent and if received it should be ignored.
MaxHcContextSpace-r5 ::= ENUMERATED {
dummy, by1024, by2048, by4096, by8192,
by16384, by32768, by65536, by131072 }
MeasurementCapability-r4 ::= SEQUENCE {
downlinkCompressedMode CompressedModeMeasCapability-r4,
uplinkCompressedMode CompressedModeMeasCapability-r4
}
MeasurementCommandWithType ::= CHOICE {
setup MeasurementType,
modify NULL,
release NULL
}
MeasurementCommandWithType-r4 ::= CHOICE {
setup MeasurementType-r4,
modify NULL,
release NULL
}
MeasurementCommandWithType-r6 ::= CHOICE {
setup MeasurementType-r6,
modify NULL,
release NULL
}
MeasurementCommandWithType-r7 ::= CHOICE {
setup MeasurementType-r7,
modify NULL,
release NULL
}
MeasurementCommandWithType-r8 ::= CHOICE {
setup MeasurementType-r8,
modify NULL,
release NULL
}
MeasurementCommandWithType-r9 ::= CHOICE {
setup MeasurementType-r9,
modify NULL,
release NULL
}
MeasurementCommandWithType-r10 ::= CHOICE {
setup MeasurementType-r10,
modify NULL,
release NULL
}
MeasurementCommandWithType-r11 ::= CHOICE {
setup MeasurementType-r11,
modify NULL,
release NULL
}
MeasurementCommandWithType-r12 ::= CHOICE {
setup MeasurementType-r12,
modify NULL,
release NULL
}
MeasurementCommandWithType-r13 ::= CHOICE {
setup MeasurementType-r13,
modify NULL,
release NULL
}
MeasurementCommandWithType-r14 ::= CHOICE {
setup MeasurementType-Relocation-r14,
modify NULL,
release NULL
}
MeasurementCommandWithType-r15 ::= CHOICE {
setup MeasurementType-Relocation-r15,
modify NULL,
release NULL
}
OngoingMeasRep ::= SEQUENCE {
measurementIdentity MeasurementIdentity,
— TABULAR: The CHOICE Measurement in the tabular description is included
— in MeasurementCommandWithType
measurementCommandWithType MeasurementCommandWithType,
measurementReportingMode MeasurementReportingMode OPTIONAL,
additionalMeasurementID-List AdditionalMeasurementID-List OPTIONAL
}
OngoingMeasRep-r4 ::= SEQUENCE {
measurementIdentity MeasurementIdentity,
— TABULAR: The CHOICE Measurement in the tabular description is included
— in MeasurementCommandWithType-r4.
measurementCommandWithType MeasurementCommandWithType-r4,
measurementReportingMode MeasurementReportingMode OPTIONAL,
additionalMeasurementID-List AdditionalMeasurementID-List OPTIONAL
}
OngoingMeasRep-r5 ::= SEQUENCE {
measurementIdentity MeasurementIdentity,
— TABULAR: The CHOICE Measurement in the tabular description is included
— in MeasurementCommandWithType-r4.
measurementCommandWithType MeasurementCommandWithType-r4,
measurementReportingMode MeasurementReportingMode OPTIONAL,
additionalMeasurementID-List AdditionalMeasurementID-List OPTIONAL,
measurementCommand-v590ext CHOICE {
— the choice "intra-frequency" shall be used for the case of intra-frequency measurement,
— as well as when intra-frequency events are configured for inter-frequency measurement
intra-frequency Intra-FreqEventCriteriaList-v590ext,
inter-frequency Inter-FreqEventCriteriaList-v590ext
} OPTIONAL,
intraFreqReportingCriteria-1b-r5 IntraFreqReportingCriteria-1b-r5 OPTIONAL,
intraFreqEvent-1d-r5 IntraFreqEvent-1d-r5 OPTIONAL
}
OngoingMeasRep-r6 ::= SEQUENCE {
measurementIdentity MeasurementIdentity,
measurementCommandWithType MeasurementCommandWithType-r6,
measurementReportingMode MeasurementReportingMode OPTIONAL,
additionalMeasurementID-List AdditionalMeasurementID-List OPTIONAL
}
OngoingMeasRep-r7 ::= SEQUENCE {
measurementIdentity MeasurementIdentity,
measurementCommandWithType MeasurementCommandWithType-r7,
measurementReportingMode MeasurementReportingMode OPTIONAL,
additionalMeasurementID-List AdditionalMeasurementID-List OPTIONAL
}
OngoingMeasRep-r8 ::= SEQUENCE {
measurementIdentity MeasurementIdentity,
measurementCommandWithType MeasurementCommandWithType-r8,
measurementReportingMode MeasurementReportingMode OPTIONAL,
additionalMeasurementID-List AdditionalMeasurementID-List OPTIONAL
}
OngoingMeasRep-r9 ::= SEQUENCE {
measurementIdentity MeasurementIdentity,
measurementCommandWithType MeasurementCommandWithType-r9,
measurementReportingMode MeasurementReportingMode OPTIONAL,
— if any of the additional measurement ID is within the range 17 to 32,
— "OngoingMeasRep-v970ext-IEs" should be present and should include
— the IE "measurementIdentity" and "additionalMeasurementID-List".
— The value of the IE "measurementIdentity" in "OngoingMeasRep-v970ext-IEs"
— should be the same as the "measurementIdentity" value in "OngoingMeasRep-r9",
— and "additionalMeasurementID-List" should contain the complete list.
— The IE "additionalMeasurementID-List" in "OngoingMeasRep-r9" should still
— contain the additional measurement ID which value is within the range 1 to 16.
additionalMeasurementID-List AdditionalMeasurementID-List OPTIONAL
}
— The IE "OngoingMeasRep-v970ext-IEs" should be included to report
— measurementIdentity values within the range 17 to 32 and when a
— "measurementIdentity" in "OngoingMeasRep-r9" needs to contain one of the
— values within the range 17 to 32 in the IE "additionalMeasurementID-List".
OngoingMeasRep-v970ext-IEs ::= SEQUENCE {
measurementIdentity MeasurementIdentity-r9 OPTIONAL,
additionalMeasurementID-List AdditionalMeasurementID-List-r9 OPTIONAL
}
OngoingMeasRep-r10 ::= SEQUENCE {
measurementIdentity MeasurementIdentity,
measurementCommandWithType MeasurementCommandWithType-r10,
measurementReportingMode MeasurementReportingMode OPTIONAL,
— if any of the additional measurement ID is within the range 17 to 32,
— "OngoingMeasRep-v970ext-IEs" (in SRNC-RelocationInfo-vab0ext-IEs)should be present
— and should include the IE "measurementIdentity" and
— "additionalMeasurementID-List". In this case, the value of the IE "measurementIdentity" in
— "OngoingMeasRep-v970ext-IEs" (in SRNC-RelocationInfo-vab0ext-IEs) should be the same as the
— "measurementIdentity" value in "OngoingMeasRep-r10", and "additionalMeasurementID-List"
— should contain the complete list.
— The IE "additionalMeasurementID-List" in "OngoingMeasRep-r10" should still
— contain the additional measurement ID which value is within the range 1 to 16.
additionalMeasurementID-List AdditionalMeasurementID-List OPTIONAL
}
OngoingMeasRep-r11 ::= SEQUENCE {
measurementIdentity MeasurementIdentity-r9,
measurementCommandWithType MeasurementCommandWithType-r11,
measurementReportingMode MeasurementReportingMode OPTIONAL,
additionalMeasurementID-List AdditionalMeasurementID-List-r9 OPTIONAL
}
OngoingMeasRep-r12 ::= SEQUENCE {
measurementIdentity MeasurementIdentity-r9,
measurementCommandWithType MeasurementCommandWithType-r12,
measurementReportingMode MeasurementReportingMode OPTIONAL,
additionalMeasurementID-List AdditionalMeasurementID-List-r9 OPTIONAL
}
OngoingMeasRep-r13 ::= SEQUENCE {
measurementIdentity MeasurementIdentity-r9,
measurementCommandWithType MeasurementCommandWithType-r13,
measurementReportingMode MeasurementReportingMode OPTIONAL,
additionalMeasurementID-List AdditionalMeasurementID-List-r9 OPTIONAL
}
OngoingMeasRep-r14 ::= SEQUENCE {
measurementIdentity MeasurementIdentity-r9,
measurementCommandWithType MeasurementCommandWithType-r14,
measurementReportingMode MeasurementReportingMode OPTIONAL,
additionalMeasurementID-List AdditionalMeasurementID-List-r9 OPTIONAL
}
OngoingMeasRep-r15 ::= SEQUENCE {
measurementIdentity MeasurementIdentity-r9,
measurementCommandWithType MeasurementCommandWithType-r15,
measurementReportingMode MeasurementReportingMode OPTIONAL,
additionalMeasurementID-List AdditionalMeasurementID-List-r9 OPTIONAL
}
OngoingMeasRepList ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep
OngoingMeasRepList-r4 ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-r4
OngoingMeasRepList-r5 ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-r5
OngoingMeasRepList-r6 ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-r6
OngoingMeasRepList-r7 ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-r7
OngoingMeasRepList-r8 ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-r8
OngoingMeasRepList-r9 ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-r9
OngoingMeasRepList-v970ext-IE ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-v970ext-IEs
OngoingMeasRepList-r10 ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-r10
OngoingMeasRepList-r11 ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-r11
OngoingMeasRepList-r12 ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-r12
OngoingMeasRepList-r13 ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-r13
OngoingMeasRepList-r14 ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-r14
OngoingMeasRepList-r15 ::= SEQUENCE (SIZE (1..maxNoOfMeas)) OF
OngoingMeasRep-r15
PDCP-Capability-r4 ::= SEQUENCE {
losslessSRNS-RelocationSupport BOOLEAN,
supportForRfc2507 CHOICE {
notSupported NULL,
supported MaxHcContextSpace
},
supportForRfc3095 CHOICE {
notSupported NULL,
supported SEQUENCE {
maxROHC-ContextSessions MaxROHC-ContextSessions-r4 DEFAULT s16,
reverseCompressionDepth INTEGER (0..65535) DEFAULT 0
}
}
}
PDCP-Capability-r5 ::= SEQUENCE {
losslessSRNS-RelocationSupport BOOLEAN,
supportForRfc2507 CHOICE {
notSupported NULL,
supported MaxHcContextSpace-r5
},
supportForRfc3095 CHOICE {
notSupported NULL,
supported SEQUENCE {
maxROHC-ContextSessions MaxROHC-ContextSessions-r4 DEFAULT s16,
reverseCompressionDepth INTEGER (0..65535) DEFAULT 0,
supportForRfc3095ContextRelocation BOOLEAN
}
}
}
PDCP-Capability-r6 ::= SEQUENCE {
losslessSRNS-RelocationSupport BOOLEAN,
losslessDLRLC-PDUSizeChange ENUMERATED { true } OPTIONAL,
supportForRfc2507 CHOICE {
notSupported NULL,
supported MaxHcContextSpace-r5
},
supportForRfc3095 CHOICE {
notSupported NULL,
supported SEQUENCE {
maxROHC-ContextSessions MaxROHC-ContextSessions-r4 DEFAULT s16,
reverseCompressionDepth INTEGER (0..65535) DEFAULT 0,
supportForRfc3095ContextRelocation BOOLEAN
}
}
}
PhysicalChannelCapability-r4 ::= SEQUENCE {
fddPhysChCapability SEQUENCE {
downlinkPhysChCapability DL-PhysChCapabilityFDD-r4,
uplinkPhysChCapability UL-PhysChCapabilityFDD
} OPTIONAL,
tdd384-PhysChCapability SEQUENCE {
downlinkPhysChCapability DL-PhysChCapabilityTDD,
uplinkPhysChCapability UL-PhysChCapabilityTDD
} OPTIONAL,
tdd128-PhysChCapability SEQUENCE {
downlinkPhysChCapability DL-PhysChCapabilityTDD-LCR-r4,
uplinkPhysChCapability UL-PhysChCapabilityTDD-LCR-r4
} OPTIONAL
}
PhysicalChannelCapability-r5 ::= SEQUENCE {
fddPhysChCapability SEQUENCE {
downlinkPhysChCapability DL-PhysChCapabilityFDD-r5,
uplinkPhysChCapability UL-PhysChCapabilityFDD
} OPTIONAL,
tdd384-PhysChCapability SEQUENCE {
downlinkPhysChCapability DL-PhysChCapabilityTDD-r5,
uplinkPhysChCapability UL-PhysChCapabilityTDD
} OPTIONAL,
tdd128-PhysChCapability SEQUENCE {
downlinkPhysChCapability DL-PhysChCapabilityTDD-LCR-r5,
uplinkPhysChCapability UL-PhysChCapabilityTDD-LCR-r4
} OPTIONAL
}
RF-Capability-r4 ::= SEQUENCE {
fddRF-Capability SEQUENCE {
ue-PowerClass UE-PowerClassExt,
txRxFrequencySeparation TxRxFrequencySeparation
} OPTIONAL,
tdd384-RF-Capability SEQUENCE {
ue-PowerClass UE-PowerClassExt,
radioFrequencyBandTDDList RadioFrequencyBandTDDList,
chipRateCapability ChipRateCapability
} OPTIONAL,
tdd128-RF-Capability SEQUENCE {
ue-PowerClass UE-PowerClassExt,
radioFrequencyBandTDDList RadioFrequencyBandTDDList,
chipRateCapability ChipRateCapability
} OPTIONAL
}
RFC3095-ContextInfo ::= SEQUENCE {
rb-Identity RB-Identity,
rfc3095-Context-List RFC3095-Context-List
}
RFC3095-Context-List ::= SEQUENCE (SIZE (1..maxRFC3095-CID)) OF SEQUENCE {
dl-RFC3095-Context DL-RFC3095-Context OPTIONAL,
ul-RFC3095-Context UL-RFC3095-Context OPTIONAL
}
RLC-Capability-r5 ::= SEQUENCE {
totalRLC-AM-BufferSize TotalRLC-AM-BufferSize-r5,
maximumRLC-WindowSize MaximumRLC-WindowSize,
maximumAM-EntityNumber MaximumAM-EntityNumberRLC-Cap
}
SRB-SpecificIntegrityProtInfo ::= SEQUENCE {
ul-RRC-HFN BIT STRING (SIZE (28)),
dl-RRC-HFN BIT STRING (SIZE (28)),
ul-RRC-SequenceNumber RRC-MessageSequenceNumber,
dl-RRC-SequenceNumber RRC-MessageSequenceNumber
}
SRB-SpecificIntegrityProtInfoList ::= SEQUENCE (SIZE (4..maxSRBsetup)) OF
SRB-SpecificIntegrityProtInfo
StateOfRRC ::= ENUMERATED {
cell-DCH, cell-FACH,
cell-PCH, ura-PCH }
StateOfRRC-Procedure ::= ENUMERATED {
awaitNoRRC-Message,
awaitRB-ReleaseComplete,
awaitRB-SetupComplete,
awaitRB-ReconfigurationComplete,
awaitTransportCH-ReconfigurationComplete,
awaitPhysicalCH-ReconfigurationComplete,
awaitActiveSetUpdateComplete,
awaitHandoverComplete,
sendCellUpdateConfirm,
sendUraUpdateConfirm,
— dummy is not used in this version of specification
— It should not be sent
dummy,
otherStates
}
TotalRLC-AM-BufferSize-r5 ::= ENUMERATED {
kb10, kb50, kb100, kb150, kb200,
kb300, kb400, kb500, kb750, kb1000 }
TPC-Combination-Info ::= SEQUENCE {
primaryCPICH-Info PrimaryCPICH-Info,
tpc-CombinationIndex TPC-CombinationIndex
}
TPC-Combination-Info-r9 ::= SEQUENCE {
primaryCPICH-Info PrimaryCPICH-Info,
tpc-CombinationIndex TPC-CombinationIndex
}
UE-MultiModeRAT-Capability-r5 ::= SEQUENCE {
multiRAT-CapabilityList MultiRAT-Capability,
multiModeCapability MultiModeCapability,
supportOfUTRAN-ToGERAN-NACC BOOLEAN
}
UE-Positioning-Capability-r4 ::= SEQUENCE {
standaloneLocMethodsSupported BOOLEAN,
ue-BasedOTDOA-Supported BOOLEAN,
networkAssistedGPS-Supported NetworkAssistedGPS-Supported,
supportForUE-GPS-TimingOfCellFrames BOOLEAN,
supportForIPDL BOOLEAN,
rx-tx-TimeDifferenceType2Capable BOOLEAN,
validity-CellPCH-UraPCH ENUMERATED { true } OPTIONAL,
sfn-sfnType2Capability ENUMERATED { true } OPTIONAL
}
UE-Positioning-LastKnownPos ::= SEQUENCE {
sfn INTEGER (0..4095),
cell-id CellIdentity,
positionEstimate PositionEstimate
}
UE-RadioAccessCapability-r4 ::= SEQUENCE {
accessStratumReleaseIndicator AccessStratumReleaseIndicator,
pdcp-Capability PDCP-Capability-r4,
rlc-Capability RLC-Capability,
transportChannelCapability TransportChannelCapability,
rf-Capability RF-Capability-r4,
physicalChannelCapability PhysicalChannelCapability-r4,
ue-MultiModeRAT-Capability UE-MultiModeRAT-Capability,
securityCapability SecurityCapability,
ue-positioning-Capability UE-Positioning-Capability-r4,
measurementCapability MeasurementCapability-r4 OPTIONAL
}
UE-RadioAccessCapability-r5 ::= SEQUENCE {
accessStratumReleaseIndicator AccessStratumReleaseIndicator,
dl-CapabilityWithSimultaneousHS-DSCHConfig
DL-CapabilityWithSimultaneousHS-DSCHConfig OPTIONAL,
pdcp-Capability PDCP-Capability-r5,
rlc-Capability RLC-Capability-r5,
transportChannelCapability TransportChannelCapability,
rf-Capability RF-Capability-r4,
physicalChannelCapability PhysicalChannelCapability-r5,
ue-MultiModeRAT-Capability UE-MultiModeRAT-Capability-r5,
securityCapability SecurityCapability,
ue-positioning-Capability UE-Positioning-Capability-r4,
measurementCapability MeasurementCapability-r4 OPTIONAL
}
UE-RadioAccessCapability-r6 ::= SEQUENCE {
accessStratumReleaseIndicator AccessStratumReleaseIndicator,
dl-CapabilityWithSimultaneousHS-DSCHConfig
DL-CapabilityWithSimultaneousHS-DSCHConfig OPTIONAL,
pdcp-Capability PDCP-Capability-r6,
rlc-Capability RLC-Capability-r5,
transportChannelCapability TransportChannelCapability,
rf-Capability RF-Capability-r4,
physicalChannelCapability PhysicalChannelCapability-r5,
ue-MultiModeRAT-Capability UE-MultiModeRAT-Capability-r5,
securityCapability SecurityCapability,
ue-positioning-Capability UE-Positioning-Capability-r4,
measurementCapability MeasurementCapability-r4 OPTIONAL
}
UL-RFC3095-Context ::= SEQUENCE {
rfc3095-Context-Identity INTEGER (0..16383),
ul-mode ENUMERATED {u, o, r},
ul-ref-ir OCTET STRING ( SIZE (1..3000)),
ul-ref-time INTEGER (0..4294967295) OPTIONAL,
ul-curr-time INTEGER (0..4294967295) OPTIONAL,
ul-syn-offset-id INTEGER (0..65535) OPTIONAL,
ul-syn-slope-ts INTEGER (0..4294967295) OPTIONAL,
ul-ref-sn-1 INTEGER (0..65535) OPTIONAL
}
END