Message Type

MP

Message Type

UE information elements

U-RNTI

MP

U-RNTI 10.3.3.47

RRC transaction identifier

CV-Failure

RRC transaction identifier 10.3.3.36

Integrity check info

CH

Integrity check info 10.3.3.16

START list

MP

1 to <maxCNdomains>

START [40] values for all CN domains.

>CN domain identity

MP

CN domain identity 10.3.1.1

>START

MP

START 10.3.3.38

START value to be used in this CN domain.

AM_RLC error indication(RB2, RB3 or RB4)

MP

Boolean

TRUE indicates AM_RLC unrecoverable error [16] occurred on RB2, RB3 or RB4 in the UE

AM_RLC error indication(RB>4)

MP

Boolean

TRUE indicates AM_RLC unrecoverable error [16] occurred on RB>4 in the UE

Cell update cause

MP

Cell update cause 10.3.3.3

Traffic volume indicator

OP

Enumerated (TRUE)

This IE shall be set to TRUE when the criteria for event based traffic volume measurement reporting is fulfilled.

Absence of this element means not fulfilled.

REL-6

Failure cause

OP

Failure cause and error information 10.3.3.14

RB timer indicator

MP

RB timer indicator 10.3.3.28

Establishment cause

OP

Establishment cause 10.3.3.11

REL-5

CS Call Type

CV-ConversationalCS

Enumerated (speech, video, other)

One spare value is needed

REL-7

HS-PDSCH in CELL_FACH

OP

Enumerated (TRUE)

The absence of this IE indicates that the UE does not support HS-PDSCH reception in CELL_FACH state.

Note 1.

REL-7

Support of common E-DCH

OP

Enumerated (TRUE)

The absence of this IE indicates that the UE does not support E-DCH enhanced random access in CELL_FACH state and Idle mode.

Note 1.

REL-8

Support of HS-DSCH DRX operation

OP

Enumerated (TRUE)

The absence of this IE indicates that the UE does not support HS-DSCH DRX operation in CELL_FACH state.

REL-8

Support of MAC-i/is

OP

Enumerated (TRUE)

The absence of this IE indicates that the UE does not support MAC-i/is operation.

REL-8

Support of SPS operation

OP

Enumerated (TRUE)

The absence of this IE indicates that the UE does not support SPS operation.

REL-8

Support of control channel DRX operation

OP

Enumerated (TRUE)

The absence of this IE indicates that the UE does not support control channel DRX operation.

REL-8

UE Mobility State Indicator

MD

Enumerated (High-mobilityDetected)

Absence of this IE implies that, according to [4] either the High mobility state is not applicable or it has not been detected by the UE.

REL-7

Capability change indicator

OP

Enumerated (TRUE)

TRUE indicates that the UE capability has changed compared to the value stored in the variable UE_CAPABILITY_TRANSFERRED.

REL-7

Reconfiguration Status Indicator

OP

Enumerated (TRUE)

TRUE indicates a reconfiguration procedure is ongoing within the UE or a response message has been submitted to RLC and the UE is waiting for the layer 2 ACK.

REL-6

MBMS Selected Services

OP

MBMS Selected Services Short 10.3.9a.7d

REL-6

Support for Two DRX schemes in URA_PCH and CELL_PCH

OP

Enumerated (TRUE)

The absence of this IE indicates that the UE does not support Two DRX schemes in URA_PCH and CELL_PCH

REL-7

Security Revert Status Indicator

OP

Enumerated (Reverted Back, Normal Operation)

Reverted Back indicates this UE has reverted back to the old security configuration by aborting the ongoing security mode command. Normal Operation indicates this UE has not reverted back to the old security configuration by aborting an ongoing security mode command. The absence of this IE indicates that the UE does not support reporting of security revert status.

REL-10

Measurement information elements

Measured results on RACH

OP

Measured results on RACH 10.3.7.45

Other Information elements

REL-10

Logged Meas Available

OP

Enumerated (TRUE)

Indicates the UE has logged measurements to report to the network

REL-10

ANR Logging Results Available

OP

Enumerated (TRUE)

True indicates the UE has ANR logging results to report to the Network.

REL-10

Failure

This IE is mandatory present if the IE "Failure cause" is present and not needed otherwise.

ConversationalCS

This IE is mandatory present if the IE "Establishment cause" has the value "Originating Conversational Call" or "Emergency Call" and a CS call is being initiated. Otherwise it is not needed.