10.2.48b SYSTEM INFORMATION 2
25.3313GPPProtocol specificationRadio Resource Control (RRC)Release 17TS
This message is used by the UTRAN to convey system information blocks to the UE. This message is used on the second system information broadcast channel (BCH on SCCPCH).
RLC-SAP: TM
Logical channel: BCCH
Direction: UTRANUE
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
CHOICE Segment combination |
MP |
Six spares are needed |
|||
|
>Combination 2 |
|||||
|
>>First Segment 2 |
MP |
First Segment 2 10.2.48.1a |
REL-12 |
||
|
>Combination 3 |
|||||
|
>>Subsequent Segment 2 |
MP |
Subsequent Segment 2 10.2.48.3a |
REL-12 |
||
|
>Combination 4 |
|||||
|
>>Last segment 2 |
MP |
Last Segment (short) 2 10.2.48.5a |
REL-12 |
||
|
>Combination 5 |
|||||
|
>>Last segment 2 |
MP |
Last Segment (short) 2 10.2.48.5a |
REL-12 |
||
|
>>First Segment 2 |
MP |
First Segment (short) 2 10.2.48.2a |
REL-12 |
||
|
>Combination 6 |
|||||
|
>>Last Segment 2 |
MP |
Last Segment (short) 2 10.2.48.5a |
REL-12 |
||
|
>>Complete list 2 |
MP |
1 to maxSIBperMsg |
NOTE 1 |
||
|
>>>Complete 2 |
MP |
Complete SIB (short) 2 10.2.48.7a |
REL-12 |
||
|
>Combination 7 |
|||||
|
>>Last Segment 2 |
MP |
Last Segment (short) 2 10.2.48.5a |
REL-12 |
||
|
>>Complete list 2 |
MP |
1..< maxSIBperMsg> |
NOTE 1 |
||
|
>>>Complete 2 |
MP |
Complete SIB (short) 2 10.2.48.7a |
REL-12 |
||
|
>>First Segment 2 |
MP |
First Segment (short) 2 10.2.48.2a |
REL-12 |
||
|
>Combination 8 |
|||||
|
>>Complete list 2 |
MP |
1 to maxSIBperMsg |
NOTE 1 |
||
|
>>>Complete 2 |
MP |
Complete SIB (short) 2 10.2.48.7a |
REL-12 |
||
|
>Combination 9 |
|||||
|
>>Complete list 2 |
MP |
1..MaxSIBperMsg |
NOTE 1 |
||
|
>>>Complete 2 |
MP |
Complete SIB (short) 2 10.2.48.7a |
REL-12 |
||
|
>>First Segment 2 |
MP |
First Segment (short) 2 10.2.48.2a |
REL-12 |
||
|
>Combination 10 |
|||||
|
>>Complete SIB of size 225 to 236 |
MP |
Complete SIB 2 10.2.48.6a |
REL-12 |
||
|
>Combination 11 |
|||||
|
>>Last segment of size 225 to 232 |
MP |
Last Segment 2 10.2.48.4a |
REL-12 |
||
|
NOTE 1: If Combination 6 – 9 contains aScheduling Block 3, the Scheduling Block 3 shall be located as the first IE in the list. |
|||||
If the encoded message does not fill a transport block, the RRC layer shall insert padding according to subclause 12.1. Padding is needed e.g. if the remaining space is insufficient to start a new First Segment (which requires several bits for SIB type, SEG_COUNT and SIB data).
10.2.48.1 First Segment
This segment type is used to transfer the first segment of a segmented system information block. The IE is used when the first segment fills the entire transport block (Combination 2).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
SIB type |
MP |
SIB Type, 10.3.8.21 |
||
|
SEG_COUNT |
MP |
SEG COUNT, 10.3.8.17 |
||
|
SIB data fixed |
MP |
SIB data fixed, 10.3.8.19 |
10.2.48.1a First Segment 2
This segment type is used to transfer the first segment of a segmented system information block. The IE is used when the first segment fills the entire transport block (Combination 2). This segment type is used on the second system information broadcast channel (BCH on SCCPCH).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
SIB type |
MP |
SIB and SB type 2, 10.3.8.22ab |
||
|
SEG_COUNT |
MP |
SEG COUNT, 10.3.8.17 |
||
|
SIB data fixed |
MP |
SIB data fixed 2, 10.3.8.19a |
10.2.48.2 First Segment (short)
This segment type is used to transfer the first segment of a segmented system information block. The IE is used when the first segment is concatenated after other segments in a transport block (Combination 5, 7 and 9).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
SIB type |
MP |
SIB Type, 10.3.8.21 |
||
|
SEG_COUNT |
MP |
SEG COUNT, 10.3.8.17 |
||
|
SIB data variable |
MP |
SIB data variable, 10.3.8.20 |
10.2.48.2a First Segment (short) 2
This segment type is used to transfer the first segment of a segmented system information block. The IE is used when the first segment is concatenated after other segments in a transport block (Combination 5, 7 and 9). This segment type is used on the second system information broadcast channel (BCH on SCCPCH).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
SIB type |
MP |
SIB and SB type 2, 10.3.8.22ab |
||
|
SEG_COUNT |
MP |
SEG COUNT, 10.3.8.17 |
||
|
SIB data variable |
MP |
SIB data variable 2, 10.3.8.20o |
10.2.48.3 Subsequent Segment
This segment type is used to transfer a subsequent segment of a segmented system information block.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
SIB type |
MP |
SIB Type, 10.3.8.21 |
||
|
Segment index |
MP |
Segment Index, 10.3.8.18 |
||
|
SIB data fixed |
MP |
SIB data fixed, 10.3.8.19 |
10.2.48.3a Subsequent Segment 2
This segment type is used to transfer a subsequent segment of a segmented system information block. This segment type is used on the second system information broadcast channel (BCH on SCCPCH).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
SIB type |
MP |
SIB and SB type 2, 10.3.8.22ab |
||
|
Segment index |
MP |
Segment Index, 10.3.8.18 |
||
|
SIB data fixed |
MP |
SIB data fixed 2, 10.3.8.19a |
10.2.48.4 Last Segment
This segment type is used to transfer the last segment of a segmented system information block. The IE is used when the last segment has a length, excluding length denominator, from 215 through 222 (Combination 11).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
SIB type |
MP |
SIB Type, 10.3.8.21 |
||
|
Segment index |
MP |
Segment Index, 10.3.8.18 |
||
|
SIB data fixed |
MP |
SIB data fixed, 10.3.8.19 |
In case the SIB data is less than 222 bits, padding shall be used. The same padding bits shall be used as defined in clause 12.1 |
10.2.48.4a Last Segment 2
This segment type is used to transfer the last segment of a segmented system information block. The IE is used when the last segment has a length, excluding length denominator, from 225 through 232 (Combination 11). This segment type is used on the second system information broadcast channel (BCH on SCCPCH).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
SIB type |
MP |
SIB and SB type 2, 10.3.8.22ab |
||
|
Segment index |
MP |
Segment Index, 10.3.8.18 |
||
|
SIB data fixed |
MP |
SIB data fixed 2, 10.3.8.19a |
In case the SIB data is less than 232 bits, padding shall be used. The same padding bits shall be used as defined in clause 12.1 |
10.2.48.5 Last Segment (short)
This segment type is used to transfer the last segment of a segmented system information block. The IE is used when the last segment has a length, excluding length denominator, of upto 214 bits (Combination 4, 5, 6 and 7).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
SIB type |
MP |
SIB Type, 10.3.8.21 |
||
|
Segment index |
MP |
Segment Index, 10.3.8.18 |
||
|
SIB data variable |
MP |
SIB data variable, 10.3.8.20 |
10.2.48.5a Last Segment (short) 2
This segment type is used to transfer the last segment of a segmented system information block. The IE is used when the last segment has a length, excluding length denominator, of upto 224 bits (Combination 4, 5, 6 and 7). This segment type is used on the second system information broadcast channel (BCH on SCCPCH).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
SIB type |
MP |
SIB and SB type 2, 10.3.8.22ab |
||
|
Segment index |
MP |
Segment Index, 10.3.8.18 |
||
|
SIB data variable |
MP |
SIB data variable 2, 10.3.8.20o |
10.2.48.6 Complete SIB
This segment type is used to transfer a non-segmented system information block. The IE is used when the complete SIB has a length, excluding length denominator, from 215 through 226 (Combination 10).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
SIB type |
MP |
SIB Type, 10.3.8.21 |
||
|
SIB data fixed |
MP |
Bit string (226) |
The first/leftmost/most significant bit of the bit string contains the first bit of the segment. In case the SIB data is less than 226 bits, padding shall be used. The same padding bits shall be used as defined in clause 12.1 |
10.2.48.6a Complete SIB 2
This segment type is used to transfer a non-segmented system information block. The IE is used when the complete SIB has a length, excluding length denominator, from 225 through 236 (Combination 10). This segment type is used on the second system information broadcast channel (BCH on SCCPCH).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
SIB type |
MP |
SIB and SB type 2, 10.3.8.22ab |
||
|
SIB data fixed |
MP |
Bit string (236) |
The first/leftmost/most significant bit of the bit string contains the first bit of the segment. In case the SIB data is less than 236 bits, padding shall be used. The same padding bits shall be used as defined in clause 12.1 |
10.2.48.7 Complete SIB (short)
This segment type is used to transfer a non-segmented system information block. The IE is used when the complete SIB has a length, excluding length denominator, of upto 214 bits (Combination 6, 7, 8 and 9).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|---|---|---|---|---|
|
Other information elements |
||||
|
SIB type |
MP |
SIB Type, 10.3.8.21 |
||
|
SIB data variable |
MP |
SIB data variable, 10.3.8.20 |
10.2.48.7a Complete SIB (short) 2
This segment type is used to transfer a non-segmented system information block. The IE is used when the complete SIB has a length, excluding length denominator, of upto 224 bits (Combination 6, 7, 8 and 9). This segment type is used on the second system information broadcast channel (BCH on SCCPCH).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|---|---|---|---|---|
|
Other information elements |
||||
|
SIB type |
MP |
SIB and SB type 2, 10.3.8.22ab |
||
|
SIB data variable |
MP |
SIB data variable 2, 10.3.8.20o |
10.2.48.8 System Information Blocks
The IE "SIB data" within the IEs, "First Segment", "Subsequent or last Segment" and "Complete SIB" contains either complete system information block or a segment of a system information block. The actual system information blocks are defined in the following clauses.
10.2.48.8.1 Master Information Block
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
Other information elements |
|||||
|
MIB Value tag |
MP |
MIB Value tag 10.3.8.9 |
|||
|
CN information elements |
|||||
|
Supported PLMN types |
MP |
PLMN Type 10.3.1.12 |
|||
|
PLMN Identity |
CV-GSM |
PLMN Identity 10.3.1.11 |
|||
|
Multiple PLMN List |
OP |
Multiple PLMN List 10.3.1.7a |
If present, this IE specifies the PLMNs of the cell. If absent, the IE “PLMN Identity” specifies the PLMN of the cell. |
REL-6 |
|
|
ANSI-41 information elements |
|||||
|
ANSI-41 Core Network Information |
CV-ANSI-41 |
ANSI-41 Core Network Information 10.3.9.1 |
|||
|
References to other system information blocks and scheduling blocks |
MP |
References to other system information blocks and scheduling blocks 10.3.8.14 |
|||
|
CSG Indicator |
OP |
Enumerated (TRUE) |
If present, the cell is a CSG cell (see [4]). If absent, the cell is not a CSG cell. |
REL-8 |
|
|
SB3 information |
OP |
SB3 information 10.3.8.14a |
REL-12 |
|
Condition |
Explanation |
|
GSM |
The IE is mandatory present if the IE "Supported PLMN Types" is set to ‘GSM-MAP’ or ‘GSM-MAP AND ANSI-41’, and not needed otherwise |
|
ANSI-41 |
The IE is mandatory present if the IE "Supported PLMN Types" is set to ‘ANSI-41’ or ‘GSM-MAP AND ANSI-41’, and not needed otherwise |
10.2.48.8.2 Scheduling Block 1
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
References to other system information blocks |
MP |
References to other system information blocks 10.3.8.13 |
10.2.48.8.3 Scheduling Block 2
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
References to other system information blocks |
MP |
References to other system information blocks 10.3.8.13 |
10.2.48.8.3a Scheduling Block 3
This segment type is used on the second system information broadcast channel (BCH on SCCPCH).
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
SB3 value tag |
MP |
Cell Value tag 2 10.3.8.4o |
REL-12 |
||
|
References to other system information blocks |
MP |
References to other system information blocks 2 10.3.8.13a |
REL-12 |
10.2.48.8.4 System Information Block type 1
The system information block type 1 contains NAS system information as well as UE timers and counters to be used in idle mode and in connected mode.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
CN information elements |
||||
|
CN common GSM-MAP NAS system information |
MP |
NAS system information (GSM-MAP) 10.3.1.9 |
||
|
CN domain system information list |
MP |
1 to <maxCNdomains> |
Send CN information for each CN domain. |
|
|
>CN domain system information |
MP |
CN domain system information 10.3.1.2 |
||
|
UE information |
||||
|
UE Timers and constants in idle mode |
MD |
UE Timers and constants in idle mode 10.3.3.44 |
The UE behaviour is unspecified if this IE is absent. |
|
|
UE Timers and constants in connected mode |
MD |
UE Timers and constants in connected mode 10.3.3.43 |
Default value means that for all timers and constants – For parameters with need MD, the defaults specified in 10.3.3.43 apply and – For parameters with need OP, the parameters are absent |
10.2.48.8.5 System Information Block type 2
The system information block type 2 contains the URA identity.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
UTRAN mobility information elements |
||||
|
URA identity list |
MP |
1 ..<maxURA> |
||
|
>URA identity |
MP |
URA identity 10.3.2.6 |
10.2.48.8.6 System Information Block type 3
The system information block type 3 contains parameters for cell selection and re-selection.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
SIB4 Indicator |
MP |
Boolean |
TRUE indicates that SIB4 is broadcast in the cell. When the UE receives SIB3 in the System Information Container message, this IE is interpreted as FALSE. |
||
|
UTRAN mobility information elements |
|||||
|
Cell identity |
MP |
Cell identity 10.3.2.2 |
|||
|
Cell selection and re-selection info |
MP |
Cell selection and re-selection info for SIB3/4 10.3.2.3 |
|||
|
Cell Access Restriction |
MP |
Cell Access Restriction 10.3.2.1 |
|||
|
Domain Specific Access Restriction Parameters For PLMN Of MIB |
OP |
Domain Specific Access Restriction Parameters 10.3.1.3c |
This IE specifies the Domain Specific Access Restriction Parameters for UEs which has chosen the PLMN in the IE “PLMN identity” of the Master Information Block. If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaviour upon reception of this IE is unspecified. |
REL-6 |
|
|
Domain Specific Access Restriction For Shared Network |
OP |
If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaviour upon reception of this IE is unspecified. |
REL-6 |
||
|
>CHOICE barring representation |
MP |
REL-6 |
|||
|
>>Domain Specific Access Restriction List |
REL-6 |
||||
|
>>>Domain Specific Access Restriction Parameters For Operator1 |
OP |
Domain Specific Access Restriction Parameters 10.3.1.3c |
This IE specifies the Domain Specific Access Restriction Parameters for UEs which has chosen the first PLMN in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block. |
REL-6 |
|
|
>>>Domain Specific Access Restriction Parameters For Operator2 |
OP |
Domain Specific Access Restriction Parameters 10.3.1.3c |
This IE specifies the Domain Specific Access Restriction Parameters for UEs which has chosen the second PLMN in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block. |
REL-6 |
|
|
>>>Domain Specific Access Restriction Parameters For Operator3 |
OP |
Domain Specific Access Restriction Parameters 10.3.1.3c |
This IE specifies the Domain Specific Access Restriction Parameters for UEs which has chosen the third PLMN in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block. |
REL-6 |
|
|
>>>Domain Specific Access Restriction Parameters For Operator4 |
OP |
Domain Specific Access Restriction Parameters 10.3.1.3c |
This IE specifies the Domain Specific Access Restriction Parameters for UEs which has chosen the fourth PLMN in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block. |
REL-6 |
|
|
>>>Domain Specific Access Restriction Parameters For Operator5 |
OP |
Domain Specific Access Restriction Parameters 10.3.1.3c |
This IE specifies the Domain Specific Access Restriction Parameters for UEs which has chosen the fifth PLMN in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block. |
REL-6 |
|
|
>>Domain Specific Access Restriction Parameters For All |
REL-6 |
||||
|
>>>Domain Specific Access Restriction Parameters |
Domain Specific Access Restriction Parameters 10.3.1.3c |
This IE specifies the common Domain Specific Access Restriction Parameters applied to all PLMNs in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block. |
REL-6 |
||
|
Deferred measurement control reading support |
OP |
If present, the UE may apply deferred reading of SIB11, SIB11bis, SIB11ter (if supported), SIB12, SIB18 and SIB19. If not present, deferred reading may not be applied. |
REL-7 |
||
|
>CHOICE mode |
OP |
If absent, the default reporting quantities are: "CPICH RSCP" (FDD) and "Primary CCPCH RSCP" (TDD). |
REL-7 |
||
|
>>FDD |
REL-7 |
||||
|
>>>Intra-frequency reporting quantity SIB3 |
MP |
Enumerated(CPICH Ec/N0, CPICH RSCP) |
REL-7 |
||
|
>>TDD |
REL-7 |
||||
|
>>>Reporting quantity list |
MP |
1 to 2 |
REL-7 |
||
|
>>>>Intra-frequency reporting quantity SIB3 |
MP |
Enumerated (Primary CCPCH RSCP, Timeslot ISCP) |
REL-7 |
||
|
MBSFN only service |
OP |
Enumerated (TRUE) |
Indicates if the cell provides only MBMS services in MBSFN mode |
REL-7 |
|
|
Paging Permission with Access Control Parameters For PLMN Of MIB |
OP |
Paging Permission with Access Control Parameters 10.3.1.10a |
This IE specifies the Paging Permission With Access Control Parameters for UEs which has chosen the PLMN in the IE “PLMN identity” of the Master Information Block. If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaviour upon reception of this IE is unspecified. |
REL-8 |
|
|
Paging Permission with Access Control For Shared Network |
OP |
If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaviour upon reception of this IE is unspecified. |
REL-8 |
||
|
>CHOICE barring representation |
MP |
REL-8 |
|||
|
>>Paging Permission with Access Control List |
REL-8 |
||||
|
>>>Paging Permission with Access Control Parameters For Operator1 |
OP |
Paging Permission with Access Control Parameters 10.3.1.10a |
This IE specifies the Paging Permission with Access Control Parameters for UEs which has chosen the first PLMN in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block. |
REL-8 |
|
|
>>>Paging Permission with Access Control Parameters For Operator2 |
OP |
Paging Permission with Access Control Parameters 10.3.1.10a |
This IE specifies the Paging Permission with Access Control Parameters for UEs which has chosen the second PLMN in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block. |
REL-8 |
|
|
>>>Paging Permission with Access Control Parameters For Operator3 |
OP |
Paging Permission with Access Control Parameters 10.3.1.10a |
This IE specifies the Paging Permission with Access Control Parameters for UEs which has chosen the third PLMN in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block. |
REL-8 |
|
|
>>>Paging Permission with Access Control Parameters For Operator4 |
OP |
Paging Permission with Access Control Parameters 10.3.1.10a |
This IE specifies the Paging Permission with Access Control Parameters for UEs which has chosen the fourth PLMN in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block. |
REL-8 |
|
|
>>>Paging Permission with Access Control Parameters For Operator5 |
OP |
Paging Permission with Access Control Parameters 10.3.1.10a |
This IE specifies the Paging Permission with Access Control Parameters for UEs which has chosen the fifth PLMN in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block. |
REL-8 |
|
|
>>Paging Permission with Access Control Parameters For All |
REL-8 |
||||
|
>>>Paging Permission with Access Control Parameters |
MP |
Paging Permission with Access Control Parameters 10.3.1.10a |
This IE specifies the common Paging Permission with Access Control Parameters applied to all PLMNs in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block. |
REL-8 |
|
|
CSG Identity |
OP |
CSG Identity 10.3.2.8 |
REL-8 |
||
|
CSG PSC Split Information |
OP |
CSG PSC Split Information 10.3.2.9 |
This IE specifies the Primary Scrambling Code reservation information for CSG Cells. |
REL-8 |
|
|
IMS Emergency Support Indicator |
OP |
Enumerated (supported) |
This IE specifies the support of IMS emergency call in the cell for limited service mode UE |
REL-9 |
10.2.48.8.7 System Information Block type 4
The system information block type 4 contains parameters for cell selection and re-selection to be used in connected mode.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
UTRAN mobility information elements |
||||
|
Cell identity |
MP |
Cell identity 10.3.2.2 |
||
|
Cell selection and re-selection info |
MP |
Cell selection and re-selection info for SIB3/4 10.3.2.3 |
||
|
Cell Access Restriction |
MP |
Cell Access Restriction 10.3.2.1 |
10.2.48.8.8 System Information Block type 5 and 5bis
The system information block type 5 contains parameters for the configuration of the common physical channels in the cell. System information block type 5bis uses the same structure as System information block type 5. System information block type 5bis is sent instead of system information block type 5 in cells that use Band IV or Band IX or Band X if it is broadcasted.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
SIB6 Indicator |
MP |
Boolean |
TRUE indicates that SIB6 is broadcast in the cell. When the UE receives SIB5 in the System Information Container message, this IE is interpreted as FALSE |
||
|
SIB22 Indicator |
MP |
Boolean |
TRUE indicates that SIB22 is broadcast in the cell. |
REL-11 |
|
|
PhyCH information elements |
|||||
|
PICH Power offset |
MP |
PICH Power offset 10.3.6.50 |
If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaves as if this IE would not have been received. |
||
|
CHOICE mode |
MP |
||||
|
>FDD |
|||||
|
>>AICH Power offset |
MP |
AICH Power offset 10.3.6.3 |
If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaves as if this IE would not have been received. |
||
|
>TDD |
|||||
|
>>PUSCH system information |
OP |
PUSCH system information 10.3.6.66 |
If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaviour upon reception of this IE is unspecified. |
||
|
>>PUSCH system information VHCR |
OP |
PUSCH system information VHCR 10.3.6.66a |
Only for 7.68 Mcps TDD If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaviour upon reception of this IE is unspecified. |
REL-7 |
|
|
>>PDSCH system information |
OP |
PDSCH system information 10.3.6.46 |
If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaviour upon reception of this IE is unspecified. |
||
|
>>TDD open loop power control |
MP |
TDD open loop power control 10.3.6.79 |
If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaves as if this IE would not have been received. |
||
|
Primary CCPCH info |
OP |
Primary CCPCH info 10.3.6.57 |
Note 1 |
||
|
PRACH system information list |
MP |
PRACH system information list 10.3.6.55 |
If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaves as if this IE would not have been received. |
||
|
Common E-DCH system info |
OP |
Common E-DCH system info 10.3.6.9a |
REL-8 |
||
|
Secondary CCPCH system information |
MP |
Secondary CCPCH system information 10.3.6.72 |
Note 2 If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaves as if this IE would not have been received. |
||
|
CBS DRX Level 1 information |
CV-CTCH |
CBS DRX Level 1 information 10.3.8.3 |
|||
|
Frequency band indicator |
OP |
Frequency band indicator 10.3.6.35b |
REL-6 |
||
|
Frequency band indicator 2 |
OP |
Frequency band indicator 2 10.3.6.35c |
REL-6 |
||
|
Frequency band indicator 3 |
OP |
Frequency band indicator 3 10.3.6.35ca |
REL-10 |
||
|
Frequency Bands Indicator Support |
OP |
REL-10 |
|||
|
>CHOICE mode |
|||||
|
>>FDD |
|||||
|
>>>Frequency bands indicator for redirection |
MP |
1 to< maxFreqBandsIndicatorSupport> |
The presence of this IE indicates one or two bands for redirection. |
REL-10 |
|
|
>>>>CHOICE frequency bands indicator |
REL-10 |
||||
|
>>>>>Frequency bands indicator 1 for redirection |
Frequency band indicator 10.3.6.35b |
REL-10 |
|||
|
>>>>>Frequency bands indicator 2 for redirection |
Frequency band indicator 2 10.3.6.35c |
REL-10 |
|||
|
>>>>>Frequency bands indicator 3 for redirection |
Frequency band indicator 3 10.3.6.35ca |
REL-10 |
|||
|
>>TDD |
|||||
|
>>>Frequency bands indicator for 1.28Mcps TDD |
MP |
1 to< maxFreqBandsIndicatorSupport> |
The presence of this IE indicates one or two bands for RF capability. |
REL-10 |
|
|
>>>>Frequency bands indicator for TDD |
MP |
Frequency band indicator for TDD 10.3.6.35d |
REL-10 |
||
|
Multiple Frequency Band indicator list |
OP |
1 to< maxMultipleFrequencyBandsFDD > |
A list of additional frequency bands which the cell belong to. The order of appearance of the additional supported frequency bands in the list indicates their priority i.e from higher to lower. If the UE supports the frequency band indicated explicitly or implicitly in accordance with subclause 8.1.1.6.5, it shall apply that frequency band. Otherwise, the UE shall apply the first listed band which it supports in the IE "Multiple Frequency Band indicator list". |
REL-10 |
|
|
>CHOICE frequency bands indicator |
MP |
REL-10 |
|||
|
>>Frequency band indicator |
Frequency band indicator 10.3.6.35b |
REL-10 |
|||
|
>>Frequency band indicator 2 |
Frequency band indicator 2 10.3.6.35c |
REL-10 |
|||
|
>>Frequency band indicator 3 |
Frequency band indicator 3 10.3.6.35ca |
REL-10 |
|||
|
HSDPA cell Indicator |
MD |
Enumerated (HSDPA Capable Cell) |
Default is ’HSDPA capability not indicated’. ’HSDPA Capable Cell’ means that the UE may consider this cell as part of the HSDPA coverage area for display indication only. This indication shall not be used for any other purpose. If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaves as if this IE would not have been received. |
REL-6 |
|
|
E-DCH cell Indicator |
MD |
Enumerated (E-DCH Capable Cell) |
Default is ’E-DCH capability not indicated’. ’E-DCH Capable Cell’ means that the UE may consider this cell as part of the E-DCH coverage area for display indication only. This indication shall not be used for any other purpose. If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaves as if this IE would not have been received. |
REL-6 |
|
|
Secondary CCPCH system information MBMS |
OP |
Secondary CCPCH system information MBMS 10.3.6.72a |
Included if MCCH is on an S-CCPCH used only for MBMS. Note 2 |
REL-6 |
|
|
CHOICE mode |
OP |
REL-7 |
|||
|
>FDD |
REL-7 |
||||
|
>>HS-DSCH common system information |
MP |
HS-DSCH common system information 10.3.6.36c |
Included if cell supports HS-DSCH reception in CELL_FACH and during IDLE to RRC Connection state transition. |
REL-7 |
|
|
>>HS-DSCH paging system information |
OP |
HS-DSCH paging system information 10.3.6.36d |
Included if cell supports for UEs in RRC Connected state paging message reception on HS-DSCH. |
REL-7 |
|
|
>TDD |
REL-7 |
||||
|
>>HS-DSCH common system information |
MP |
HS-DSCH common system information 1.28Mcps TDD 10.3.6.36ca |
Included if cell supports HS-DSCH reception in CELL_FACH and during IDLE to RRC Connection state transition. |
REL-8 |
|
|
>>HS-DSCH paging system information |
OP |
HS-DSCH paging system information 1.28Mcps TDD 10.3.6.36da |
Included if cell supports for UEs in RRC Connected state paging message reception on HS-DSCH. |
REL-8 |
|
|
TDD MBSFN information |
OP |
TDD MBSFN Information 10.3.6.78b |
TDD only: included only if some timeslots are designated to MBSFN. |
REL-7 |
|
|
HS-DSCH DRX in CELL_FACH Information |
OP |
HS-DSCH DRX in CELL_FACH Information 10.3.6.36g |
REL-8 |
||
|
HS-DSCH DRX in CELL_FACH Information 1.28 Mcps TDD |
OP |
HS-DSCH DRX in CELL_FACH Information 1.28 Mcps TDD 10.3.6.36h |
REL-8 |
||
|
Second Frequency info |
OP |
Integer (0 .. 16383) |
Note 3 |
REL-8 |
|
|
Treset Usage Indicator |
OP |
Enumerated (TRUE) |
Only for 1.28 Mcps TDD. The presence of this IE means the timer Treset is not valid when the dedicated H-RNTI is configured in CELL_FACH and CELL_PCH. |
REL-8 |
|
|
UpPCH Position Info |
CV-Frequency |
Integer (0 .. 127) |
Only for 1.28 Mcps TDD. |
REL-8 |
|
|
Cell Update message with optimised encoding |
OP |
Enumerated (TRUE) |
Only for FDD. The presence of this IE means that UE shall use the Rel-11 asn1 message type for Cell Update, if the UE supports this message type. |
REL-11 |
|
|
Adjacent channel interference level |
OP |
Enumerated (MODERATE, HIGH) |
Only for FDD. This IE indicates the level of external adjacent channel interference. |
REL-14 |
NOTE 1: DL scrambling code of the Primary CCPCH is the same as the one for Primary CPICH (FDD only).
NOTE 2: There is only one MCCH in a cell, which may either be mapped on to an S-CCPCH also used for non- MBMS purposes or to an S-CCPCH dedicated to MBMS. In the first case the MCCH configuration is specified within the IE "Secondary CCPCH system information", in the latter case the MCCH configuration is provided within the IE "Secondary CCPCH system information MBMS".
NOTE 3: This IE is used in 1.28 Mcps TDD multi-frequency cell to indicate the secondary frequency at which enhanced E-DCH transmission and HS-PDSCH reception for 1.28 Mcps TDD is supported and to indicate that corresponding IEs: "Common E-DCH system info", "HS-DSCH common system information" (TDD) and "HS-DSCH DRX in CELL_FACH Information 1.28 Mcps TDD" can apply for this frequency. The absense of "Frequency info" means that enhanced E-DCH access transmission and HS-PDSCH reception and above IEs apply for primary frequency. For 1.28 Mcps TDD only.
|
Condition |
Explanation |
|
CTCH |
The IE is mandatory present if the IE "CTCH indicator" is equal to TRUE for at least one FACH, otherwise the IE is not needed in the message |
|
Frequency |
The IE is optional if the IE "Frequency info" is present, otherwise the IE is not needed. |
10.2.48.8.9 System Information Block type 6
The system information block type 6 contains parameters for the configuration of the common and shared physical channels to be used in connected mode.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
PhyCH information elements |
|||||
|
PICH Power offset |
MP |
PICH Power offset 10.3.6.50 |
|||
|
CHOICE mode |
MP |
||||
|
>FDD |
|||||
|
>>AICH Power offset |
MP |
AICH Power offset 10.3.6.3 |
|||
|
>TDD |
|||||
|
>>PUSCH system information |
OP |
PUSCH system information 10.3.6.66 |
|||
|
>>PUSCH system information VHCR |
OP |
PUSCH system information VHCR 10.3.6.66a |
Only for 7.68 Mcps TDD |
REL-7 |
|
|
>>PDSCH system information |
OP |
PDSCH system information 10.3.6.46 |
|||
|
>>TDD open loop power control |
MP |
TDD open loop power control 10.3.6.79 |
|||
|
Primary CCPCH info |
OP |
Primary CCPCH info 10.3.6.57 |
Note 1 |
||
|
PRACH system information list |
OP |
PRACH system information list 10.3.6.55 |
|||
|
Secondary CCPCH system information |
OP |
Secondary CCPCH system information 10.3.6.72 |
|||
|
CBS DRX Level 1 information |
CV-CTCH |
CBS DRX Level 1 information 10.3.8.3 |
|||
|
Frequency band indicator |
OP |
Frequency band indicator 10.3.6.35b |
REL-6 |
||
|
Frequency band indicator 2 |
OP |
Frequency band indicator 2 10.3.6.35c |
REL-6 |
||
|
Frequency band indicator 3 |
OP |
Frequency band indicator 3 10.3.6.35ca |
REL-10 |
||
|
Multiple Frequency Band indicator list |
OP |
1 to< maxMultipleFrequencyBandsFDD > |
A list of additional frequency bands which the cell belongs to. The order of appearance of the additional supported frequency bands in the list indicates their priority i.e from higher to lower. If the UE supports the frequency band indicated explicitly or implicitly in accordance with subclause 8.1.1.6.6, it shall apply that frequency band. Otherwise, the UE shall apply the first listed band which it supports in the IE "Multiple Frequency Band indicator list". |
REL-10 |
|
|
>CHOICE frequency bands indicator |
MP |
REL-10 |
|||
|
>>Frequency band indicator |
Frequency band indicator 10.3.6.35b |
REL-10 |
|||
|
>>Frequency band indicator 2 |
Frequency band indicator 2 10.3.6.35c |
REL-10 |
|||
|
>>Frequency band indicator 3 |
Frequency band indicator 3 10.3.6.35ca |
REL-10 |
|||
|
Adjacent channel interference level |
OP |
Enumerated (MODERATE, HIGH) |
Only for FDD. This IE indicates the level of external adjacent channel interference. |
REL-14 |
NOTE 1: DL scrambling code of the Primary CCPCH is the same as the one for Primary CPICH (FDD only).
|
Condition |
Explanation |
|
CTCH |
The IE is mandatory present if the IE "CTCH indicator" is equal to TRUE for at least one FACH, otherwise the IE is not needed |
10.2.48.8.10 System Information Block type 7
The system information block type 7 contains the fast changing parameters UL interference and Dynamic persistence level.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
CHOICE mode |
MP |
|||
|
>FDD |
||||
|
>>UL interference |
MP |
UL interference 10.3.6.87 |
||
|
>TDD |
(no data) |
|||
|
PhyCH information elements |
||||
|
PRACHs listed in system information block type 5 |
MP |
1 to<maxPRACH> |
The order of the PRACHs is the same as in system information block type 5 or 5bis. |
|
|
>Dynamic persistence level |
MP |
Dynamic persistence level 10.3.6.35 |
||
|
PRACHs listed in system information block type 6 |
OP |
1 to <maxPRACH> |
The order of the PRACHs is the same as in system information block type 6. |
|
|
>Dynamic persistence level |
MP |
Dynamic persistence level 10.3.6.35 |
||
|
Expiration Time Factor |
MD |
Expiration Time Factor 10.3.3.12 |
Default is 1. |
10.2.48.8.11 Void
10.2.48.8.12 Void
10.2.48.8.13 Void
10.2.48.8.14 System Information Block type 11
The system information block type 11 contains measurement control information to be used in the cell.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
SIB12 Indicator |
MP |
Boolean |
TRUE indicates that SIB12 is broadcast in the cell. |
||
|
Measurement information elements |
|||||
|
FACH measurement occasion info |
OP |
FACH measurement occasion info 10.3.7.8 |
If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaviour upon reception of this IE is unspecified. |
||
|
Measurement control system information |
MP |
Measurement control system information 10.3.7.47 |
For 1.28 Mcps TDD if the cell is operating in MBSFN only mode the UE behaviour upon reception of this IE is unspecified. |
||
|
Measurement Scaling Factor |
OP |
Enumerated( SF_UTRA_CF1, SF_UTRA_CF2) |
The Measurement Scaling Factor is used to scale the measurement performance for UTRA/E-UTRA frequencies configured in CELL_FACH as specified in [19]. Even if no UTRA or E-UTRA frequency is configured for reduced measurement performance, the network may configure a scaling factor and configure any of the scaling factor values [19]. |
REL-12 |
|
|
MBSFN frequency list |
OP |
MBSFN frequency list 10.3.9a.12a |
If present contains all neighbouring frequencies of MBSFN clusters operating in MBSFN mode as indicated in subclause 8.1.1.6.3. If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaviour upon reception of this IE is unspecified. |
10.2.48.8.14a System Information Block type 11bis
The system information block type 11bis contains measurement control information to be used in the cell in addition to System Information Block type 11 and optionally UTRAN mobility information for CSG cells.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
Measurement information elements |
REL-6 |
||||
|
Measurement control system information extension |
OP |
Measurement control system information extension 10.3.7.47a |
REL-6 |
||
|
UTRAN mobility information elements |
REL-8 |
||||
|
CSG PSC Split Information |
OP |
CSG PSC Split Information 10.3.2.9 |
This IE specifies the Primary Scrambling Code reservation information for CSG Cells. |
REL-8 |
|
|
Dedicated CSG frequency list |
OP |
1 to <maxDedicatedCSGFreq> |
This IE specifies the frequencies dedicated for CSG cells only. |
REL-8 |
|
|
>Dedicated CSG frequency |
MP |
Frequency Info 10.3.6.36 |
REL-8 |
10.2.48.8.14b System Information Block type 11ter
The system information block type 11ter contains measurement control information to be used in the cell in addition to System Information Block type 11 and System Information Block type 11bis.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
Measurement information elements |
REL-12 |
||||
|
Measurement control system information inter-frequency extension |
OP |
Inter-frequency cell info list extension 10.3.7.47b |
REL-12 |
10.2.48.8.15 System Information Block type 12
The system information block type 12 contains measurement control information to be used in connected mode.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Measurement information elements |
||||
|
FACH measurement occasion info |
OP |
FACH measurement occasion info 10.3.7.8 |
||
|
Measurement control system information |
MP |
Measurement control system information 10.3.7.47 |
10.2.48.8.16 System Information Block type 13
The system information block type 13 contains ANSI-41 system information.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
Other information elements |
||||
|
CN Information Elements |
||||
|
CN Domain system information list |
MP |
1 to <maxCNdomains> |
Send CN information for each CN domain. |
|
|
>CN Domain system information |
MP |
CN Domain system information 10.3.1.2 |
||
|
UE Information |
||||
|
UE timers and constants in idle mode |
MD |
UE timers and constants in idle mode 10.3.3.44 |
The UE behaviour is unspecified if this IE is absent. |
|
|
Capability update requirement |
MD |
Capability update requirement 10.3.3.2 |
Default value is defined in subclause 10.3.3.2 |
10.2.48.8.16.1 System Information Block type 13.1
The system information block type 13.1 contains the ANSI-41 RAND information.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
ANSI-41 information elements |
||||
|
ANSI-41 RAND information |
MP |
ANSI-41 RAND information 10.3.9.6 |
10.2.48.8.16.2 System Information Block type 13.2
The system information block type 13.2 contains the ANSI-41 User Zone Identification information.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
ANSI-41 information elements |
||||
|
ANSI-41 User Zone Identification information |
MP |
ANSI-41 User Zone Identification information 10.3.9.7 |
10.2.48.8.16.3 System Information Block type 13.3
The system information block type 13.3 contains the ANSI-41 Private Neighbour List information.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
ANSI-41 information elements |
||||
|
ANSI-41 Private Neighbour List information |
MP |
ANSI-41 Private Neighbour List information 10.3.9.5 |
10.2.48.8.16.4 System Information Block type 13.4
The system information block type 13.4 contains the ANSI-41 Global Service Redirection information.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|
ANSI-41 information elements |
||||
|
ANSI-41 Global Service Redirection information |
MP |
ANSI-41 Global Service Redirection information 10.3.9.2 |
10.2.48.8.17 System Information Block type 14
NOTE: Only for 3.84 Mcps TDD and 7.68 Mcps TDD.
The system information block type 14 contains parameters for common and dedicated physical channel uplink outer loop power control information to be used in both idle and connected mode.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|---|---|---|---|---|
|
PhyCH information elements |
||||
|
Individual Timeslot interference list |
MP |
1 to <maxTS> |
||
|
>Individual Timeslot interference |
MP |
Individual Timeslot interference 10.3.6.38 |
||
|
Expiration Time Factor |
MD |
Expiration Time Factor 10.3.3.12 |
Default is 1. |
10.2.48.8.18 System Information Block type 15
The system information block type 15 contains information useful for UE-based or UE-assisted positioning methods.
|
Information Element/Group name |
Need |
Multi |
Type and Reference |
Semantics description |
|
GPS Data ciphering info |
OP |
UE positioning Ciphering info 10.3.7.86 |
If this IE is present then the SIB types 15.1, 15.2 & 15.3 are ciphered in accordance with the Data Assistance Ciphering Algorithm specified in [18] |
|
|
Reference position |
MP |
Ellipsoid point with altitude and uncertainty ellipsoid 10.3.8.4c |
approximate position where the UE is located |
|
|
GPS reference time |
MP |
UE positioning GPS reference time 10.3.7.96 |
||
|
Satellite information |
OP |
1 to <maxSat> |
This IE is present whenever bad (failed/failing) satellites are detected by UTRAN [18]. |
|
|
>BadSatID |
MP |
Enumerated(0..63) |
10.2.48.8.18.0 System Information Block type 15bis
The system information block type 15bis contains information useful for UE-based or UE-assisted positioning methods. The content of this SIB is common to all GANSS.
|
Information Element/Group name |
Need |
Type and Reference |
Semantics description |
Version |
|
Reference position |
MP |
Ellipsoid point with altitude and uncertainty ellipsoid 10.3.8.4c |
approximate position where the UE is located |
REL-7 |
|
GANSS reference time |
MP |
UE positioning GANSS reference time 10.3.7.96o |
REL-7 |
|
|
GANSS ionospheric model |
OP |
UE positioning GANSS ionospheric model 10.3.7.92a |
REL-7 |
|
|
GANSS additional ionospheric model |
OP |
UE positioning GANSS additional ionospheric model 10.3.7.92b |
REL-8 |
|
|
GANSS Earth orientation paramaters |
OP |
UE positioning GANSS Earth orientation parameters 10.3.7.92c |
REL-8 |
10.2.48.8.18.1 System Information Block type 15.1
The system information block type 15.1 contains information useful for UE positioning DGPS Corrections. The DGPS Corrections message contents are based on a Type-1 message of DGPS specified in [13].
|
Information Element/Group name |
Need |
Multi |
Type and Reference |
Semantics description |
|---|---|---|---|---|
|
DGPS corrections |
MP |
UE positioning GPS DGPS corrections 10.3.7.91 |
10.2.48.8.18.1a System Information Block type 15.1bis
The system information block type 15.1bis contains information useful for UE positioning DGANSS Corrections. The DGANSS Corrections message contents are based on a Type-1 message of DGANSS specified in [13]. The content of this SIB is GNSS specific.
|
Information Element/Group name |
Need |
Type and Reference |
Semantics description |
Version |
|---|---|---|---|---|
|
DGANSS corrections |
MP |
UE positioning DGANSS corrections 10.3.7.91b |
REL-7 |
10.2.48.8.18.1b System Information Block type 15.1ter
The system information block type 15.1ter contains information useful for UE positioning DBDS corrections and UE positioning BDS Ionospheric Grid Model. The content of DBDS Corrections and BDS Ionospheric Grid Model are based on the NAV message specified in [86]. The content of this SIB is for BDS only.
|
Information Element/Group name |
Need |
Type and Reference |
Semantics description |
Version |
|---|---|---|---|---|
|
DBDS corrections |
OP |
UE positioning DBDS corrections 10.3.7.92e |
REL-12 |
|
|
BDS Ionospheric Grid Model |
OP |
UE positioning BDS Ionospheric Grid Model 10.3.7.92d |
REL-12 |
10.2.48.8.18.2 System Information Block type 15.2
The system information block type 15.2 contains information useful for GPS Navigation Model. These IE fields are based on information extracted from the subframes 1 to 3 of the GPS navigation message [12].
|
Information Element/Group name |
Need |
Multi |
Type and Reference |
Semantics description |
|---|---|---|---|---|
|
Transmission TOW |
MP |
Integer (0..604799) |
The approximate GPS time-of-week when the message is broadcast. in seconds |
|
|
SatID |
MP |
Integer (0..63) |
Satellite ID |
|
|
GPS Ephemeris and Clock Correction Parameters |
MP |
UE positioning GPS Ephemeris and Clock Correction parameters 10.3.7.91a |
10.2.48.8.18.2a System Information Block type 15.2bis
The system information block type 15.2bis contains information useful for GANSS Navigation Model. The content of this SIB is GNSS specific.
|
Information Element/Group name |
Need |
Type and Reference |
Semantics description |
Version |
|---|---|---|---|---|
|
GANSS Navigation Model |
MP |
UE positioning GANSS navigation model 10.3.7.94a |
REL-7 |
10.2.48.8.18.2b System Information Block type 15.2ter
The system information block type 15.2ter contains information useful for GANSS Navigation Model. The content of this SIB is GNSS specific.
|
Information Element/Group name |
Need |
Type and Reference |
Semantics description |
Version |
|---|---|---|---|---|
|
GANSS additional navigation models |
MP |
UE positioning GANSS additional navigation models 10.3.7.94b |
REL-8 |
10.2.48.8.18.3 System Information Block type 15.3
The system information block type 15.3 contains information useful for ionospheric delay, UTC offset, and Almanac. These IEs contain information extracted from the subframes 4 and 5 of the GPS navigation message, [12].
|
Information Element/Group name |
Need |
Multi |
Type and Reference |
Semantics description |
|
Transmission TOW |
MP |
Integer (0..604799) |
The approximate GPS time-of-week when the message is broadcast. in seconds |
|
|
GPS Almanac and Satellite Health |
OP |
UE positioning GPS almanac 10.3.7.89 |
||
|
GPS ionospheric model |
OP |
UE positioning GPS ionospheric model 10.3.7.92 |
||
|
GPS UTC model |
OP |
UE positioning GPS UTC model 10.3.7.97 |
||
|
SatMask |
CV-Almanac |
Bit string(1..32) |
indicates the satellites that contain the pages being broadcast in this data set |
|
|
LSB TOW |
CV-Almanac |
Bit string(8) |
|
Condition |
Explanation |
|
Almanac |
This IE is mandatory present if the IE "GPS Almanac and Satellite Health" is present |
10.2.48.8.18.3a System Information Block type 15.3bis
The system information block type 15.3bis contains information useful for GANSS time model, UTC offset and Almanac, as well as auxiliary information. The content of this SIB is GNSS specific.
|
Information Element/Group name |
Need |
Multi |
Type and Reference |
Semantics description |
Version |
|
GANSS Almanac |
OP |
UE positioning GANSS almanac 10.3.7.89a |
REL-7 |
||
|
GANSS time models |
OP |
1 to <maxGANSS-1> |
REL-7 |
||
|
>GANSS time model |
OP |
UE positioning GANSS time model 10.3.7.97a |
REL-7 |
||
|
GANSS UTC model |
OP |
UE positioning GANSS UTC model 10.3.7.97c |
REL-7 |
||
|
GANSS additional UTC models |
OP |
UE positioning GANSS additional UTC models 10.3.7.97d |
REL-8 |
||
|
GANSS auxiliary information |
OP |
UE positioning GANSS auxiliary information 10.3.7.97f |
REL-8 |
10.2.48.8.18.4 System Information Block type 15.4
The system information block type 15.4 contains ciphering information for System Information Block type 15.5 and information useful for OTDOA UE-assisted Positioning method.
|
Information Element/Group name |
Need |
Multi |
Type and Reference |
Semantics description |
|
OTDOA Data ciphering info |
OP |
UE positioning Ciphering info 10.3.7.86 |
If this IE is present then the for UE-based the System Information Block type 15.5 is ciphered in accordance with the Data Assistance Ciphering Algorithm specified in [18] |
|
|
OTDOA assistance data for UE-assisted |
MP |
UE positioning OTDOA assistance data for UE-assisted |
10.2.48.8.18.4a System Information Block type 15.5
The system information block type 15.5 contains information useful for OTDOA UE-based Positioning method.
|
Information Element/Group name |
Need |
Multi |
Type and Reference |
Semantics description |
|
OTDOA assistance data for UE-based |
MP |
UE positioning OTDOA assistance data for UE-based 10.3.7.103a |
10.2.48.8.18.5 System Information Block type 15.6
The system information block type 15.6 contains information useful for acquisition of GANSS signals. The content of this SIB is GNSS specific.
|
Information Element/Group name |
Need |
Multi |
Type and Reference |
Semantics description |
Version |
|
GANSS TOD |
MP |
Integer (0..86399) |
GANSS Time of Day in seconds where GANSS reference measurement information is valid. |
REL-7 |
|
|
GANSS reference measurement information |
MP |
UE positioning GANSS reference measurement information 10.3.7.88b |
REL-7 |
10.2.48.8.18.6 System Information Block type 15.7
The system information block type 15.7 contains data bits which can be used for data wipe-off. The content of this SIB is GNSS specific.
|
Information Element/Group name |
Need |
Multi |
Type and Reference |
Semantics description |
Version |
|
GANSS data bit assistance |
MP |
UE positioning GANSS data bit assistance 10.3.7.97b |
REL-7 |
10.2.48.8.18.7 System Information Block type 15.8
The system information block type 15.8 contains ciphering information and real-time integrity information. The content of this SIB is GNSS specific.
|
Information Element/Group name |
Need |
Multi |
Type and Reference |
Semantics description |
Version |
|
GANSS Data ciphering info |
OP |
UE positioning Ciphering info 10.3.7.86 |
If this IE is present then the SIB types 15.1bis, 15.1ter, 15.2bis, 15.2ter, 15.3bis, 15.6 and 15.7 are ciphered in accordance with the Data Assistance Ciphering Algorithm specified in [18] |
REL-7 |
|
|
GANSS real-time integrity |
OP |
UE positioning GANSS real-time integrity 10.3.7.95b |
REL-7 |
10.2.48.8.19 System Information Block type 16
The system information block type 16 contains radio bearer, transport channel and physical channel parameters to be stored by UE in idle and connected mode for use during handover to UTRAN.
|
Information Element/Group name |
Need |
Multi |
Type and Reference |
Semantics description |
|
RB information elements |
||||
|
Predefined RB configuration |
MP |
Predefined RB configuration 10.3.4.7 |
||
|
TrCH Information Elements |
||||
|
Predefined TrCH configuration |
MP |
Predefined TrCH configuration 10.3.5.9 |
||
|
PhyCH Information Elements |
||||
|
Predefined PhyCH configuration |
MP |
Predefined PhyCH configuration 10.3.6.56 |
10.2.48.8.20 System Information Block type 17
NOTE: Only for TDD.
The system information block type 17 contains fast changing parameters for the configuration of the shared physical channels to be used in connected mode.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
PhyCH information elements |
|||||
|
PUSCH system information |
OP |
PUSCH system information 10.3.6.66 |
|||
|
PUSCH system information VHCR |
OP |
PUSCH system information VHCR 10.3.6.66a |
Only for 7.68 Mcps TDD |
REL-7 |
|
|
PDSCH system information |
OP |
PDSCH system information 10.3.6.46 |
10.2.48.8.21 System Information Block type 18
The System Information Block type 18 contains PLMN identities of neighbouring cells to be considered in idle mode as well as in connected mode.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|
Idle mode PLMN identities |
OP |
PLMN identities of neighbour cells 10.3.7.53a |
|||
|
Connected mode PLMN identities |
OP |
PLMN identities of neighbour cells 10.3.7.53a |
|||
|
Idle mode PLMN identities for SIB 11bis |
OP |
PLMN identities of neighbour cells 10.3.7.53a |
REL-6 |
||
|
Connected mode PLMN identities for SIB 11bis |
OP |
PLMN identities of neighbour cells 10.3.7.53a |
REL-6 |
||
|
Idle mode PLMN identities for SIB 11ter |
OP |
PLMN identities of neighbour cells for SIB 11ter 10.3.7.53b |
REL-12 |
||
|
Connected mode PLMN identities for SIB 11ter |
OP |
PLMN identities of neighbour cells for SIB 11ter 10.3.7.53b |
REL-12 |
10.2.48.8.22 System Information Block type 19
The system information block type 19 contains Inter-RAT frequency and priority information to be used in the cell.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
UTRA priority info list |
MP |
UTRA priority info list 10.3.7.113 |
REL-8 |
||
|
GSM priority info list |
OP |
GSM priority info list 10.3.7.114 |
REL-8 |
||
|
GSM ScalingFactor for Treselection |
OP |
Real (0.25..4 by step of 0.25) |
If present, it is used by the UE as scaling factor for Treselections or Treselections,PCH or Treselections,FACH for inter-RAT absolute priority based cell reselection evaluation to GSM [4]. It replaces Inter-RAT ScalingFactor for Treselection in SIB3/4, if available. |
REL-11 |
|
|
E-UTRA frequency and priority info list |
OP |
E-UTRA frequency and priority info list 10.3.7.115 |
REL-8 |
||
|
E-UTRA ScalingFactor for Treselection |
OP |
Real (0.25..4 by step of 0.25) |
If present, it is used by the UE as scaling factor for Treselections or Treselections,PCH or Treselections,FACH for inter-RAT absolute priority based cell reselection evaluation to E-UTRA [4]. It replaces Inter-RAT ScalingFactor for Treselection in SIB3/4, if available. |
REL-11 |
|
|
E-UTRA frequency RACH reporting information |
OP |
E-UTRA frequency RACH reporting information 10.3.7.139 |
REL-11 |
||
|
CELL_FACH Absolute Priority Measurement Indicator |
OP |
Enumerated (High Priority Layers, All Layers) |
High Priority Layers means that absolute priority measurements are only required in CELL_FACH state on higher priority layers when Srxlev and Squal of the serving cell are above Sprioritysearch1 and Sprioritysearch2. All Layers means that absolute priority measurements are always required in CELL_FACH state according to the rules in [4] and requirements in [19]. A UE that indicates FGI3 but not FGI4 shall behave as if High priority Layers is indicated. |
REL-11 |
10.2.48.8.23 System Information Block type 20
The system information block type20 contains HNBName.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
HNB Name |
OP |
HNB Name 10.3.8.4m |
REL-8 |
10.2.48.8.24 System Information Block type 21
The system information block type 21 contains parameters for EAB.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
EAB Parameters |
OP |
If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3, the UE behaviour upon reception of this IE is unspecified. |
REL-11 |
||
|
>CHOICE barring representation |
MP |
REL-11 |
|||
|
>>EAB Parameters Per PLMN List |
1 to 6 |
The number of instances of this IE is the number of instances of the IE “Multiple PLMNs” in the IE “Multiple PLMN List” of the MIB plus one. The first instance of this IE specifies the EAB Parameters for UEs which have chosen the PLMN in the IE “PLMN identity” of the MIB, the second instance specifies the EAB Parameters for UEs which have chosen the first PLMN in the IE “Multiple PLMNs” in the IE “Multiple PLMN List” of the MIB, the third instance specifies the EAB Parameters for UEs which have chosen the second PLMN in the IE “Multiple PLMNs” in the IE “Multiple PLMN List” of the MIB, and so on. |
REL-11 |
||
|
>>>Domain Specific EAB Parameters |
OP |
Domain Specific EAB Parameters 10.3.1.3d |
Absence of this IE means that no extended access barring applies for the corresponding PLMN |
REL-11 |
|
|
>>EAB Parameters For All |
Domain Specific EAB Parameters 10.3.1.3d |
This IE specifies the common EAB Parameters applicable for all PLMNs, including the PLMN in the IE “PLMN identity” of the MIB and the PLMNs in the IE “Multiple PLMNs” in the IE “Multiple PLMN List” of the MIB. |
REL-11 |
10.2.48.8.25 System Information Block type 22
NOTE: Only for FDD.
The system information block type 22 contains information for Concurrent deployment of 2ms and 10ms TTI in a cell, NodeB triggered HS-DPCCH transmission, Fallback to R99 PRACH, TTI alignment, Per HARQ process activation and de-activation and HS-DSCH DRX operation with second DRX cycle in CELL_FACH. Further, it contains control parameters related to the PRACH access preamble.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
PRACH preamble control parameters extension list Type 1 (for Enhanced Uplink) |
OP |
PRACH preamble control parameters extension list for Type 1 (for Enhanced Uplink) 10.3.6.135 |
Control parameters of the physical signal. This and/or parameters in IE "PRACH preamble control parameters (for Enhanced Uplink)" is used for access by UE’s supporting concurrent deployment when the outcome of the common E-DCH TTI selection is 10ms. Also used for access if "E-DCH Transmission Time Interval" is equal to 10ms when concurrent deployment is not used, by UEs that support either NodeB triggered HS-DPCCH transmission or HS-DSCH DRX operation with second DRX cycle or Fallback to R99 PRACH. See subclause 8.5.45, 8.5.73 and 8.5.74. |
REL-11 |
|
|
PRACH preamble control parameters extension list Type 2 (for Enhanced Uplink) |
OP |
PRACH preamble control parameters extension list (for Enhanced Uplink) 10.3.6.134 |
Control parameters of the physical signal. Used for access by UE’s supporting only concurrent deployment, and by UEs supporting TTI alignment and Per HARQ process if the IE "Common E-DCH Resource Configuration Information List Extension" is not present, when the outcome of the common E-DCH TTI selection is 2ms. See subclause 8.5.45 and 8.5.73. |
REL-11 |
|
|
PRACH preamble control parameters extension list Type 3 (for Enhanced Uplink) |
OP |
PRACH preamble control parameters extension list (for Enhanced Uplink) 10.3.6.134 |
Control parameters of the physical signal. Used for access by UE’s supporting TTI alignment and Per HARQ process if the IE "Common E-DCH Resource Configuration Information List Extension" is present, when the outcome of the common E-DCH TTI selection is 2ms. See subclause 8.5.45, and 8.5.73. |
REL-11 |
|
|
Concurrent Deployment of 2ms and 10ms TTI |
OP |
Concurrent Deployment of 2ms and 10ms TTI 10.3.5.25 |
REL-11 |
||
|
NodeB triggered HS-DPCCH Transmission |
OP |
NodeB triggered HS-DPCCH Transmission 10.3.6.130 |
REL-11 |
||
|
Fallback R99 PRACH info |
OP |
Fallback R99 PRACH info 10.3.6.141 |
REL-11 |
||
|
Common E-DCH Resource Configuration Information List Extension |
OP |
Common E-DCH Resource Configuration Information List Extension 10.3.6.140 |
REL-11 |
||
|
HS-DSCH DRX in CELL_FACH with second DRX cycle Information |
OP |
HS-DSCH DRX in CELL_FACH with second DRX cycle Information 10.3.6.139 |
Rel-11 |
||
|
Cell reselection indication reporting |
OP |
Enumerated (TRUE) |
REL-12 |
10.2.48.8.26 System Information Block type 23
The system information block type 23 contains information for RAN-assisted WLAN interworking.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
CHOICE WLAN representation |
MP |
REL-12 |
|||
|
>WLAN Offload Information Per PLMN List |
1 to 6 |
The number of instances of this IE is the number of instances of the IE "Multiple PLMNs" in the IE "Multiple PLMN List" of the MIB plus one. The first instance of this IE specifies the WLAN Offload Information for UEs which have chosen the PLMN in the IE "PLMN identity" of the MIB, the second instance specifies the WLAN Offload Information for UEs which have chosen the first PLMN in the IE "Multiple PLMNs" in the IE "Multiple PLMN List" of the MIB, the third instance specifies the WLAN Offload Information for UEs which have chosen the second PLMN in the IE "Multiple PLMNs" in the IE "Multiple PLMN List" of the MIB, and so on. |
REL-12 |
||
|
>>WLAN Offload Information |
OP |
WLAN Offload Information 10.3.9b.3 |
Absence of this IE means that no WLAN Offload Information applies for the corresponding PLMN. |
REL-12 |
|
|
>WLAN Offload Information common for all PLMN |
This IE specifies the common WLAN Offload Information configuration applicable for all PLMNs, including the PLMN in the IE "PLMN identity" of the MIB and the PLMNs in the IE "Multiple PLMNs" in the IE "Multiple PLMN List" of the MIB. |
REL-12 |
|||
|
>>WLAN Offload Information |
OP |
WLAN Offload Information 10.3.9b.3 |
Absence of this IE means that no WLAN Offload Information applies for all PLMNs. |
REL-12 |
10.2.48.8.27 System Information Block type 24
NOTE: Only for FDD.
The system information block type 24 contains information for controlling access in CELL_FACH state, CELL_PCH state and URA_PCH state.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
DTCH transmission blocking |
OP |
Bit string(maxNumAccessGroups) |
Bit 0 is the first/leftmost bit of the bit string. Bit n corresponds to the n-th defined Access Group. |
REL-12 |
|
|
Expiration Time Factor 2 |
MD |
Expiration Time Factor 2 10.3.3.12b |
Default is 1. |
REL-12 |
10.2.48.8.28 System Information Block type 25
NOTE: Only for FDD.
The system information block type 25 contains parameters for ACDC barring information in Idle mode.
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
ACDC Parameters |
MP |
If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3, the UE behaviour upon reception of this IE is unspecified. |
REL-13 |
||
|
>CHOICE barring representation |
MP |
REL-13 |
|||
|
>>ACDC Parameters Per PLMN List |
1 to 6 |
The number of instances of this IE is the number of instances of the IE "Multiple PLMNs" in the IE "Multiple PLMN List" of the MIB plus one. The first instance of this IE specifies the ACDC Parameters for UEs which have chosen the PLMN in the IE "PLMN identity" of the MIB, the second instance specifies the ACDC Parameters for UEs which have chosen the first PLMN in the IE "Multiple PLMNs" in the IE "Multiple PLMN List" of the MIB, the third instance specifies the ACDC Parameters for UEs which have chosen the second PLMN in the IE "Multiple PLMNs" in the IE "Multiple PLMN List" of the MIB, and so on. |
REL-13 |
||
|
>>>PLMN specific ACDC Parameters |
OP |
Specific ACDC Barring Information 10.3.1.18 |
Absence of this IE means that no extended access barring applies for the corresponding PLMN |
REL-13 |
|
|
>>>ACDC applicable for Roamer |
OP |
Enumerated (TRUE) |
Absence of this IE means that no ACDC barring applies to roaming UE for the corresponding PLMN |
REL-13 |
|
|
>>ACDC Parameters For All |
REL-13 |
||||
|
>>>ACDC Information |
MP |
Specific ACDC Barring Information 10.3.1.18 |
This IE specifies the common ACDC Parameters applicable for all PLMNs, including the PLMN in the IE "PLMN identity" of the MIB and the PLMNs in the IE "Multiple PLMNs" in the IE "Multiple PLMN List" of the MIB. |
REL-13 |
|
|
>>>ACDC applicable for Roamer |
OP |
Enumerated (TRUE) |
Absence of this IE means that no ACDC barring applies to roaming UE for all the PLMN. |
REL-13 |