10.2.34 RADIO BEARER SETUP COMPLETE
25.3313GPPProtocol specificationRadio Resource Control (RRC)Release 17TS
This message is sent by the UE to confirm the establishment of the radio bearer.
RLC-SAP: AM
Logical channel: DCCH
Direction: UE UTRAN
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
Message Type |
MP |
Message Type |
|||
|
UE information elements |
|||||
|
RRC transaction identifier |
MP |
RRC transaction identifier 10.3.3.36 |
|||
|
Integrity check info |
CH |
Integrity check info 10.3.3.16 |
|||
|
Uplink integrity protection activation info |
OP |
Integrity protection activation info 10.3.3.17 |
|||
|
CHOICE mode |
OP |
||||
|
>FDD |
(no data) |
||||
|
>TDD |
|||||
|
>>CHOICE TDD option |
MP |
REL-4 |
|||
|
>>>3.84 Mcps TDD |
REL-4 |
||||
|
>>>>Uplink Timing Advance |
OP |
Uplink Timing Advance 10.3.6.95 |
This information element shall be present in case of handover procedure if timing advance is enabled. Calculated timing advance value for the new cell after handover in a synchronous TDD network |
||
|
>>>>Extended Uplink Timing Advance |
OP |
Extended Uplink Timing Advance 10.3.6.95a |
REL-7 |
||
|
>>>7.68 Mcps TDD |
REL-7 |
||||
|
>>>>Extended Uplink Timing Advance |
OP |
Extended Uplink Timing Advance 10.3.6.95a |
This information element shall be present in case of handover procedure if timing advance is enabled. Calculated timing advance value for the new cell after handover in a synchronous TDD network |
REL-7 |
|
|
>>>1.28 Mcps TDD |
(No data) |
REL-4 |
|||
|
START |
OP |
START 10.3.3.38 |
This information element is not needed for transparent mode RBs if prior to this procedure there exists one RB using RLC-TM. |
||
|
Other information elements |
REL-7 |
||||
|
Deferred measurement control reading |
OP |
Enumerated (TRUE) |
Indicates the UE has not read SIB11, SIB11bis, SIB11ter (if supported) and SIB12, if available. |
REL-7 |
|
|
RB Information elements |
|||||
|
COUNT-C activation time |
OP |
Activation time 10.3.3.1 |
Used for radio bearers mapped on RLC-TM. |
||
|
Uplink counter synchronisation info |
OP |
||||
|
>RB with PDCP information list |
OP |
1 to <maxRBallRABs> |
This IE is needed for each RB having PDCP in the case of lossless SRNS relocation |
||
|
>>RB with PDCP information |
MP |
RB with PDCP information 10.3.4.22 |
|||
|
>START list |
MP |
1 to <maxCNdomains> |
START [40] values for all CN domains. |
||
|
>>CN domain identity |
MP |
CN domain identity 10.3.1.1 |
|||
|
>>START |
MP |
START 10.3.3.38 |
START value to be used in this CN domain. |