10.2.27 RADIO BEARER RECONFIGURATION
25.3313GPPProtocol specificationRadio Resource Control (RRC)Release 17TS
This message is sent from UTRAN to reconfigure parameters related to a change of QoS or to release and setup a radio bearer used for ptp transmission of MBMS services of the broadcast type. This procedure can also change the multiplexing of MAC, reconfigure transport channels and physical channels. This message is also used to perform a handover from GERAN Iu mode to UTRAN.
RLC-SAP: AM or UM or sent through GERAN Iu mode
Logical channel: DCCH or sent through GERAN Iu mode
Direction: UTRAN UE
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
Message Type |
MP |
Message Type |
|||
|
UE Information elements |
|||||
|
RRC transaction identifier |
MP |
RRC transaction identifier 10.3.3.36 |
|||
|
Integrity check info |
CH |
Integrity check info 10.3.3.16 |
|||
|
Integrity protection mode info |
OP |
Integrity protection mode info 10.3.3.19 |
The UTRAN should not include this IE unless it is performing an SRNS relocation or a handover from GERAN Iu mode |
||
|
Ciphering mode info |
OP |
Ciphering mode info 10.3.3.5 |
The UTRAN should not include this IE unless it is performing either an SRNS relocation or a handover from GERAN Iu mode and a change in ciphering algorithm |
||
|
Activation time |
MD |
Activation time 10.3.3.1 |
Default value is "now" |
||
|
Dynamic activation time |
OP |
Dynamic activation time 10.3.3.1a |
REL-13 |
||
|
Delay restriction flag |
OP |
Enumerated (TRUE) |
This IE is always set to TRUE and included if the activation time is restricted according to subclause 8.6.3.1 |
REL-6 |
|
|
New U-RNTI |
OP |
U-RNTI 10.3.3.47 |
|||
|
New C-RNTI |
OP |
C-RNTI 10.3.3.8 |
|||
|
New DSCH-RNTI |
OP |
DSCH-RNTI 10.3.3.9a |
Should not be set in FDD. If received The UE behaviour is unspecified. |
||
|
New H-RNTI |
OP |
H-RNTI 10.3.3.14a |
REL-5 |
||
|
New Primary E-RNTI |
OP |
E-RNTI 10.3.3.10a |
REL-6 |
||
|
New Secondary E-RNTI |
OP |
E-RNTI 10.3.3.10a |
FDD only |
REL-6 |
|
|
RNTI handling at cell re-selection |
CV-URA_PCH |
Enumerated (TRUE) |
The presence of this IE indicates that the UE shall clear the variable H_RNTI, C_RNTI and E_RNTI upon cell re-selection when operating in URA_PCH with seamless transition. The absence indicates that the UE shall not clear the variable H_RNTI, C_RNTI and E_RNTI upon cell re-selection when operating in URA_PCH with seamless transition. |
REL-13 |
|
|
RRC State Indicator |
MP |
RRC State Indicator 10.3.3.35a |
|||
|
UE Mobility State Indicator |
CV-FACH_PCH |
Enumerated (High-mobilityDetected) |
Absence of this IE implies that, according to [4], the UE shall consider itself being in the mobility state the UE has maintained in CELL_DCH state or being not in high mobility state after the state transition, if applicable. |
REL-7 |
|
|
UTRAN DRX cycle length coefficient |
OP |
UTRAN DRX cycle length coefficient 10.3.3.49 |
|||
|
Access Group identity |
OP |
Integer (0..15) |
REL-12 |
||
|
CN information elements |
|||||
|
CN Information info |
OP |
CN Information info 10.3.1.3 |
|||
|
Signalling Connection release indication |
OP |
CN domain identity 10.3.1.1 |
REL-14 |
||
|
UTRAN mobility information elements |
|||||
|
RNC support for change of UE capability |
OP |
Boolean |
Should be included if the message is used to perform an SRNS relocation |
REL-7 |
|
|
Reconfiguration in response to requested change of UE capability |
OP |
Enumerated (TRUE) |
REL-7 |
||
|
URA identity |
OP |
URA identity 10.3.2.6 |
|||
|
Specification mode information elements |
REL-8 |
||||
|
Default configuration for CELL_FACH |
CV-SRNS_RELOCATION |
Default configuration for CELL_FACH 10.3.4.0a |
REL-8 |
||
|
CHOICE specification mode |
MP |
REL-5 |
|||
|
>Complete specification |
|||||
|
RB information elements |
|||||
|
>>RAB information to setup list |
OP |
1 to <maxRABsetup> |
For each RAB established |
REL-14 |
|
|
>>>RAB information for setup |
MP |
RAB information for setup 10.3.4.10 |
REL-14 |
||
|
>>RAB information to reconfigure list |
OP |
1 to < maxRABsetup > |
|||
|
>>>RAB information to reconfigure |
MP |
RAB information to reconfigure 10.3.4.11 |
|||
|
>>RAB information for MBMS ptp bearer list |
OP |
1 to < maxMBMSservSelect > |
REL-6 |
||
|
>>>RAB information for MBMS ptp bearer |
MP |
RAB information for MBMS ptp bearer 10.3.4.9a |
REL-6 |
||
|
>>RB information to reconfigure list |
MP |
1to <maxRB> |
Although this IE is not always required, need is MP to align with ASN.1 |
||
|
OP |
REL-4 |
||||
|
>>>RB information to reconfigure |
MP |
RB information to reconfigure 10.3.4.18 |
|||
|
>>RB information to be affected list |
OP |
1 to <maxRB> |
|||
|
>>>RB information to be affected |
MP |
RB information to be affected 10.3.4.17 |
|||
|
>>RB information to release list |
OP |
1 to <maxRB> |
REL-14 |
||
|
>>>RB information to release |
MP |
RB information to release 10.3.4.19 |
REL-14 |
||
|
>>RB with PDCP context relocation info list |
OP |
1 to <maxRBallRABs> |
This IE is needed for each RB having PDCP and performing PDCP context relocation |
REL-5 |
|
|
>>>PDCP context relocation info |
MP |
PDCP context relocation info 10.3.4.1a |
REL-5 |
||
|
>>PDCP ROHC target mode |
OP |
PDCP ROHC target mode 10.3.4.2a |
REL-5 |
||
|
>>UM RLC re-establishment RB List |
OP |
1 to <maxRB> |
REL-10 |
||
|
>>>RB bearer to be re-established |
MP |
RB identity, 10.3.4.16 |
UE behaviour is unspecified if RB identity in this IE indicates a value, which is less than or equal to 4 or indicates a radio bearer, which does not use UM RLC or is not associated with PS domain. |
REL-10 |
|
|
>>Other state configuration info |
OP |
Other state configuration info 10.3.8.27 |
REL-13 |
||
|
TrCH Information Elements |
|||||
|
Uplink transport channels |
|||||
|
>>UL Transport channel information common for all transport channels |
OP |
UL Transport channel information common for all transport channels 10.3.5.24 |
|||
|
>>Deleted TrCH information list |
OP |
1 to <maxTrCH> |
|||
|
>>>Deleted UL TrCH information |
MP |
Deleted UL TrCH information 10.3.5.5 |
|||
|
>>Added or Reconfigured TrCH |
OP |
1 to <maxTrCH> |
|||
|
>>>Added or Reconfigured UL TrCH information |
MP |
Added or Reconfigured UL TrCH information 10.3.5.2 |
|||
|
Downlink transport channels |
|||||
|
>>DL Transport channel information common for all transport channels |
OP |
DL Transport channel information common for all transport channels 10.3.5.6 |
|||
|
>>Deleted TrCH information list |
OP |
1 to <maxTrCH> |
|||
|
>>>Deleted DL TrCH information |
MP |
Deleted DL TrCH information 10.3.5.4 |
|||
|
>>Added or Reconfigured TrCH |
OP |
1 to <maxTrCH> |
|||
|
>>>Added or Reconfigured DL TrCH information |
MP |
Added or Reconfigured DL TrCH information 10.3.5.1 |
|||
|
Retrievable configuration |
|||||
|
>>Retrievable configuration info |
OP |
Retrievable configuration info 10.3.8.25 |
REL-13 |
||
|
>Preconfiguration |
REL-5 |
||||
|
>>CHOICE Preconfiguration mode |
MP |
This value only applies in case the message is sent through GERAN Iu mode |
|||
|
>>>Predefined configuration identity |
MP |
Predefined configuration identity 10.3.4.5 |
|||
|
>>>Default configuration |
|||||
|
>>>>Default configuration mode |
MP |
Enumerated (FDD, TDD) |
Indicates whether the FDD or TDD version of the default configuration shall be used |
||
|
>>>>Default configuration identity |
MP |
Default configuration identity 10.3.4.0 |
|||
|
PhyCH information elements |
|||||
|
Frequency info |
OP |
Frequency info 10.3.6.36 |
|||
|
Multi-frequency Info |
OP |
Multi-frequency Info 10.3.6.39a |
This IE is used for 1.28 Mcps TDD only |
REL-7 |
|
|
DTX-DRX timing information |
OP |
DTX-DRX timing information 10.3.6.34b |
REL-7 |
||
|
DTX-DRX Information |
OP |
DTX-DRX Information 10.3.6.34a |
REL-7 |
||
|
HS-SCCH less Information |
OP |
HS-SCCH less Information 10.3.6.36ab |
REL-7 |
||
|
MIMO parameters |
OP |
MIMO parameters 10.3.6.41a |
REL-7 |
||
|
MIMO mode with four transmit antennas parameters |
OP |
MIMO mode with four transmit antennas parameters 10.3.6.142 |
REL-11 |
||
|
DCH Enhancements info FDD |
OP |
DCH Enhancements info FDD 10.3.6.149 |
REL-12 |
||
|
Control Channel DRX information |
OP |
Control Channel DRX information 1.28 Mcps TDD 10.3.6.107 |
This IE is used for 1.28 Mcps TDD only |
REL-8 |
|
|
SPS Information |
OP |
SPS information 1.28 Mcps TDD 10.3.6.110 |
This IE is used for 1.28 Mcps TDD only |
REL-8 |
|
|
MU-MIMO info |
OP |
MU-MIMO info 1.28 Mcps TDD 10.3.6.122 |
This IE is used for 1.28 Mcps TDD only |
REL-10 |
|
|
Non-rectangular resource allocation indicator |
OP |
Enumerated(TRUE) |
For 1.28 Mcps TDD only. The absence of this IE indicates that the non-rectangular resource allocation is not used. |
REL-12 |
|
|
Non-rectangular resource specific timeslots set |
CV-Non-rectangularResourceAllocation |
Bit string (7) |
For 1.28 Mcps TDD only. The value 1 of a bit indicates the corresponding timeslot in which the channelization codes are assigned by physical control channel. The value 0 of a bit indicates the corresponding timeslot in which all channelization codes are assigned when the timeslot is scheduled to the UE. The first/leftmost bit of the bit string is for TS0. |
REL-12 |
|
|
HS-SCCH DRX in CELL_FACH Information |
CV-CELL_FACH |
HS-SCCH DRX in CELL_FACH Information 10.3.6.154 |
For FDD only |
REL-14 |
|
|
Simplified HS-SCCH type 1 operation |
OP |
Enumerated (TRUE) |
The presence of this IE indicates that Simplified HS-SCCH type 1 operation is applicable. |
REL-15 |
|
|
Uplink radio resources |
|||||
|
Maximum allowed UL TX power |
MD |
Maximum allowed UL TX power 10.3.6.39 |
Default value is the existing maximum UL TX power |
||
|
Uplink DPCH info |
OP |
Uplink DPCH info 10.3.6.88 |
|||
|
E-DCH Info |
OP |
E-DCH Info 10.3.6.97 |
REL-6 |
||
|
Uplink secondary cell info FDD |
OP |
Uplink secondary cell info FDD 10.3.6.115 |
FDD only |
REL-9 |
|
|
Multi-carrier E-DCH Info for LCR TDD |
OP |
Multi-carrier E-DCH Info for LCR TDD 10.3.6.97a |
1.28Mcps TDD only |
REL-10 |
|
|
Uplink CLTD info FDD |
OP |
Uplink CLTD info FDD 10.3.6.125 |
FDD only |
REL-11 |
|
|
Uplink OLTD info FDD |
OP |
Uplink OLTD info FDD 10.3.6.126 |
FDD only |
REL-11 |
|
|
Other TTI E-DCH Configuration Information |
OP |
Other TTI E-DCH Configuration Information 10.3.6.152 |
FDD only |
REL-12 |
|
|
Filtered UE power headroom reporting information |
OP |
Filtered UE power headroom reporting information 10.3.7.140 |
FDD only |
REL-12 |
|
|
Other TTI E-DCH Configuration Information on secondary UL Frequency |
OP |
Other TTI E-DCH Configuration Information on secondary UL Frequency 10.3.6.156 |
FDD only |
REL-14 |
|
|
Filtered UE power headroom reporting information on secondary UL frequency |
OP |
Filtered UE power headroom reporting information 10.3.7.140 |
FDD only |
REL-14 |
|
|
Downlink radio resources |
|||||
|
Downlink HS-PDSCH Information |
OP |
Downlink HS-PDSCH Information 10.3.6.23a |
REL-5 |
||
|
Downlink information common for all radio links |
OP |
Downlink information common for all radio links 10.3.6.24 |
|||
|
Downlink information per radio link list |
MP |
1 to <maxRL> |
Although this IE is not always required, need is MP to align with ASN.1 |
||
|
OP |
REL-4 |
||||
|
>Downlink information for each radio link |
MP |
Downlink information for each radio link 10.3.6.27 |
|||
|
Downlink secondary cell info FDD |
OP |
Downlink secondary cell info FDD 10.3.6.31a |
FDD only |
REL-8 |
|
|
Additional downlink secondary cell info list FDD |
OP |
2 |
REL-10 |
||
|
>Downlink secondary cell info FDD |
OP |
Downlink secondary cell info FDD 10.3.6.31a |
FDD only |
REL-10 |
|
|
Additional downlink secondary cell info list FDD 2 |
OP |
4 |
REL-11 |
||
|
>Downlink secondary cell info FDD |
OP |
Downlink secondary cell info FDD 10.3.6.31a |
FDD only |
REL-11 |
|
|
Common E-RGCH info FDD |
OP |
Common E-RGCH info FDD 10.3.6.138 |
FDD only |
REL-11 |
|
|
DPCCH2 info FDD |
OP |
DPCCH2 info FDD 10.3.6.148 |
FDD only |
REL-12 |
|
|
MBMS PL Service Restriction Information |
OP |
Enumerated (TRUE) |
REL-6 |
||
|
CELL_DCH measurement occasion info LCR |
OP |
CELL_DCH measurement occasion info LCR 10.3.7.126 |
REL-9 |
|
Condition |
Explanation |
|
FACH_PCH |
This IE is mandatory default when a transition from CELL_DCH to CELL_FACH, URA_PCH or CELL_PCH is requested by the message and is not needed otherwise. |
|
SRNS_RELOCATION |
This IE is optional if the message is used to perform an SRNS relocation and is not needed otherwise. |
|
Non-rectangularResourceAllocation |
This IE is optionally present if non-rectangular resource allocation is configured. Otherwise, it is not needed. |
|
URA_PCH |
This IE is optional present when IE "RRC State Indicator" is set to URA_PCH. Otherwise it is not needed. |
|
CELL_FACH |
This IE is optional present when IE "RRC State Indicator" is set to CELL_FACH. Otherwise it is not needed. |