10.2.25 PHYSICAL SHARED CHANNEL ALLOCATION
25.3313GPPProtocol specificationRadio Resource Control (RRC)Release 17TS
NOTE: Only for TDD.
This message is used by UTRAN to assign physical resources to USCH/DSCH transport channels in TDD, for temporary usage by the UE.
RLC-SAP: UM on SHCCH, UM on DCCH
Logical channel: SHCCH or DCCH
Direction: UTRAN UE
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
|---|---|---|---|---|
|
Message Type |
MP |
Message type |
||
|
DSCH-RNTI |
OP |
DSCH-RNTI 10.3.3.9a |
||
|
RRC transaction identifier |
MP |
RRC transaction identifier 10.3.3.36 |
||
|
Uplink timing advance Control |
MD |
Uplink Timing Advance Control 10.3.6.96 |
Default value is the existing value for uplink timing advance |
|
|
PUSCH capacity allocation info |
OP |
PUSCH Capacity Allocation info 10.3.6.64 |
||
|
PDSCH capacity allocation info |
OP |
PDSCH Capacity Allocation info 10.3.6.42 |
||
|
Confirm request |
MD |
Enumerated(No Confirm, Confirm PDSCH, Confirm PUSCH) |
Default value is No Confirm |
|
|
Traffic volume report request |
OP |
Integer (0 .. 255) |
Indicates the number of frames between start of the allocation period and sending measurement report. The value should be less than the value for Allocation Duration. |
|
|
ISCP Timeslot list |
OP |
1 to maxTS |
||
|
>Timeslot number |
MP |
Timeslot number 10.3.6.84 |
Timeslot numbers, for which the UE shall report the timeslot ISCP in PUSCH CAPACITY REQUEST message. |
|
|
Request P-CCPCH RSCP |
MP |
Boolean |
TRUE indicates that a Primary CCPCH RSCP measurement shall be reported by the UE in PUSCH CAPACITY REQUEST message. |